Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ZERO SOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Instabilities in line-driven stellar winds. III - Wave propagation in the case of pure line absorption

The spatial and temporal evolution of small-amplitude velocity perturbations is examined in the idealized case of a stellar wind that is driven by pure line absorption of the star's continuum radiation. It is established that the instability in the supersonic region is of the advective type relative to the star, but of the absolute type relative to the wind itself. It is also shown that the inward propagation of information in such a wind is limited to the sound speed, in contrast to the theory of Abbott, which predicts inward propagation faster than sound. This apparent contradiction is resolved through an extensive discussion of the analytically soluble case of zero sound speed.

Owocki, S. P.↗

Lattice Boltzmann model for compressible fluids

A lattice Boltzmann model is derived which simulates compressible fluids. By choosing the parameters of the equilibrium distribution appropriately, the sound speed (which may be set arbitrarily low), bulk viscosity, and kinematic viscosity can be selected. This model simulates compressible flows and can include shocks. With a proper rescaling and zero-sound speed, this model simulates Burgers's equation. The viscosity determined by a Chapman-Enskog expansion compares well with that measured form simulations. The exact solutions of Burgers's equation on the unit circle are compared to solutions of lattice Boltzmann model finding reasonable agreement.

Alexander, F. J.↗

A Study of the Zero-Lift Drag-Rise Characteristics of Wing-Body Combinations Near the Speed of Sound

Comparisons have been made of the shock phenomena and drag-rise increments for representative wing and central-body combinations with those for bodies of revolution having the same axial developments of cross-sectional areas normal to the airstream. On the basis of these comparisons, it is concluded that near the speed of sound the zero-lift drag rise of a low-aspect-ratio thin-wing and body combination is primarily dependent on the axial development of the cross-sectional areas normal to the airstream. It follows that the drag rise for any such configuration is approximately the same as that for any other with the same development of cross-sectional areas. Investigations have also been made of representative wing-body combinations with the body so indented that the axial developments of cross-sectional areas for the combinations were the same as that for the original body alone. Such indentations greatly reduced or eliminated the zero-lift drag-rise increments associated with the wings near the speed of sound.

Whitcomb, Richard T↗

Rate-control system /RCS/ for zero-gravity experiments

A sounding rocket payload, free falling in space, with low angular body rates provides a near zero gravity environment. To efficiently utilize the time above the earth's atmosphere, a positive means of controlling angular body rates must be provided for the payload. A rate-control system (RCS) was designed at the Goddard Space Flight Center (GSFC) to meet the requirements of the Space Processing Applications Rocket Program and for use on the Black Brant-V sounding rocket. After the sounding rocket exits the atmosphere, the payload separates, the RCS reduces the initial angular rates to low levels and maintains the low levels until the payload reenters the atmosphere. The maiden flight of the RCS was aboard a NASA sounding rocket. The system performed as expected, and the payload experienced a low-G environment below 0.0001 G for 300 sec. This paper describes the design criteria, the components used, and the mode of operation.

Schuler, B. C.↗

Material suspension within an acoustically excited resonant chamber

A method is described for positioning an object within a chamber, which is especially useful in performing manufacturing operations under zero gravity conditions. Sound waves are applied within the chamber in different directions and at a frequency for each direction that establishes a standing wave pattern so that the object is automatically urged towards the intersections of the nodes, or locations of minimum pressure.

Wang, T. G.↗

Deep-Focusing Time-Distance Helioseismology

Much progress has been made by measuring the travel times of solar acoustic waves from a central surface location to points at equal arc distance away. Depth information is obtained from the range of arc distances examined, with the larger distances revealing the deeper layers. This method we will call surface-focusing, as the common point, or focus, is at the surface. To obtain a clearer picture of the subsurface region, it would, no doubt, be better to focus on points below the surface. Our first attempt to do this used the ray theory to pick surface location pairs that would focus on a particular subsurface point. This is not the ideal procedure, as Born approximation kernels suggest that this focus should have zero sensitivity to sound speed inhomogeneities. However, the sensitivity is concentrated below the surface in a much better way than the old surface-focusing method, and so we expect the deep-focusing method to be more sensitive. A large sunspot group was studied by both methods. Inversions based on both methods will be compared.

Duvall, T. L., Jr.↗

Tracker: Image-Processing and Object-Tracking System Developed

Tracker is an object-tracking and image-processing program designed and developed at the NASA Lewis Research Center to help with the analysis of images generated by microgravity combustion and fluid physics experiments. Experiments are often recorded on film or videotape for analysis later. Tracker automates the process of examining each frame of the recorded experiment, performing image-processing operations to bring out the desired detail, and recording the positions of the objects of interest. It can load sequences of images from disk files or acquire images (via a frame grabber) from film transports, videotape, laser disks, or a live camera. Tracker controls the image source to automatically advance to the next frame. It can employ a large array of image-processing operations to enhance the detail of the acquired images and can analyze an arbitrarily large number of objects simultaneously. Several different tracking algorithms are available, including conventional threshold and correlation-based techniques, and more esoteric procedures such as "snake" tracking and automated recognition of character data in the image. The Tracker software was written to be operated by researchers, thus every attempt was made to make the software as user friendly and self-explanatory as possible. Tracker is used by most of the microgravity combustion and fluid physics experiments performed by Lewis, and by visiting researchers. This includes experiments performed on the space shuttles, Mir, sounding rockets, zero-g research airplanes, drop towers, and ground-based laboratories. This software automates the analysis of the flame or liquid s physical parameters such as position, velocity, acceleration, size, shape, intensity characteristics, color, and centroid, as well as a number of other measurements. It can perform these operations on multiple objects simultaneously. Another key feature of Tracker is that it performs optical character recognition (OCR). This feature is useful in extracting numerical instrumentation data that are embedded in images. All the results are saved in files for further data reduction and graphing. There are currently three Tracking Systems (workstations) operating near the laboratories and offices of Lewis Microgravity Science Division researchers. These systems are used independently by students, scientists, and university-based principal investigators. The researchers bring their tapes or films to the workstation and perform the tracking analysis. The resultant data files generated by the tracking process can then be analyzed on the spot, although most of the time researchers prefer to transfer them via the network to their offices for further analysis or plotting. In addition, many researchers have installed Tracker on computers in their office for desktop analysis of digital image sequences, which can be digitized by the Tracking System or some other means. Tracker has not only provided a capability to efficiently and automatically analyze large volumes of data, saving many hours of tedious work, but has also provided new capabilities to extract valuable information and phenomena that was heretofore undetected and unexploited.

Klimek, Robert B.↗

Exact solution of the Lifshitz equations governing the growth of fluctuations in cosmology

The exact solution of the Lifshitz equations governing the cosmological evolution of an initial fluctuation is presented. Lifshitz results valid for squares of the sound velocity equal to zero and 1/3 are extended in closed form to any equation of state where the pressure equals the total energy density times the square of the sound velocity. The solutions embody all the results found previously for special cases of the square of the sound velocity. It is found that the growth of any initial fluctuation is only an exponential function of time with an exponent of not more than 4/3 and is insufficient to produce galaxies unless the initial fluctuation is very large. A possible way to produce very large initial fluctuations by modifying the equation of state by including gravitational interactions is also examined. It is found that a phase transition can occur at baryonic density of 1 nucleon per cubic Planck length or equivalently, at a time of about 10 to the -43rd power sec. At those early times, the masses allowed by causality requirements are too small to be of interest in galaxy formation.

Adams, P. J.↗

Spatial and Temporal Characterization of Cyanobacteria Blooms in the Mississippi Sound and Their Relationship to the Bonnet Carré Spillway Openings

During the spring and summer of 2019, an unprecedented cyanobacterial harmful algal bloom (cyanoHAB) was responsible for beach advisories on 25 beaches along the Mississippi Sound for over 3 months. Due to the preceding heavy rainfall and flooding within the Mississippi River watershed, for the first time in history, the Bonnet Carré Spillway (BCS) opened twice in one year during 2019. The coastal cyanoHAB coincided with the second BCS opening. The main objectives of this study were: (1) to investigate the potential for using the National Aeronautics and Space Administration (NASA) ocean color standard Cyanobacteria Index (CIcyano) algorithm to characterize the spatial and temporal extent of the 2019 cyanoHAB; (2) to couple the CIcyano data with river discharge, salinity, and modeled-wind data to study the conditions leading to the cyanoHAB and factors aiding the advection and persistence of the bloom within the Mississippi Sound, including a possible relationship to the BCS; (3) to further investigate the relationship with the BCS by repeating the methods using data from 2018, which was a year when the BCS was opened but no evidence of cyanoHABs was reported along the Mississippi coast. Weekly means and monthly frequency CIcyano images, river discharge, salinity, and modeled-wind data from February to September of 2018 and 2019 were analyzed, which coincide with three BCS openings. In March 2018, a cyanobacteria bloom was observed within Lake Pontchartrain coinciding with the BCS opening; however, the month-long bloom was contained to the lake. Two distinct cyanoHABs were observed in 2019 and both blooms were advected into the Mississippi Sound, and likely contributed to the 3-month-long beach water advisories of 2019 along the Mississippi coastline. From March to mid-July 2019, salinity at stations within the Mississippi Sound was consistently near zero indicating high levels of freshwater. During that time, winds were predominantly northwestward, preventing the BCS waters from flushing into the Mississippi Shelf and resulting in BCS waters remaining longer within the estuarine lakes and Mississippi Sound. Although the BCS had an undeniable impact on the presence of the coastal cyanoHAB of 2019, other variables including wind direction, water flow, mixing, and persistence of freshwater within the Sound can determine the intensity and extent of the cyanoHABs. Coupling in situ phytoplankton information from freshwater water bodies to the marine continuum along with water flow, wind data, and satellite imagery could help identify cyanoHABs at early stages and forecast their trajectory and potential impacts on coastal areas.

Bonnet Carré Spillway↗

Drop dynamics in space

Experiments to study the dynamics of liquid drops are being planned to be performed in the weightless environment of Spacelab. The liquids will range from superfluid helium through ordinary liquid to molten metals and glasses. The experiments will be conducted in a chamber now being developed which utilizes the forces and torques produced by acoustic waves excited within the chamber. None of the currently available facilities (drop towers, sounding rockets, or zero-g aircraft flights) can provide a sustained weightless environment, since the resulting zero-g periods are from 3 sec to 5 min. Spaceflight, however, will provide weightlessness for periods of one week, or more, allowing truly laboratory-like experiments to be conducted on free liquid drops and bubbles. In this paper we discuss both the drop dynamics experiments proposed for Spacelab and the acoustic chamber: its operation and current testing for these and other experiments.

Wang, T. G.↗

Prediction of structures and magnetic orientations in solid alpha and beta-O2

A quasi-harmonic-lattice-dynamics method coupled with a pattern-recognition optimization scheme is used to determine the minimum energy structures and magnetic orientations of solid oxygen. It is shown that the magnetic interaction is responsible for the stability of alpha-O2 with respect to beta-O2 at zero temperature and pressure. The calculated alpha-O2 lattice parameters, magnetic orientations, and sublimation energy are in good agreement with experiment. Phonon dispersion curves are calculated at vector k not equal to zero and the acoustic sound velocities are determined. The rms translational and orientational fluctuations from equilibrium are also calculated. The beta-O2 phase is described by constraining the magnetic moments so that the magnetic Hamiltonian preserves the hexagonal symmetry of the crystal. The calculated lattice parameters are in good agreement with the experiments, and a three-sublattice, quasi-helical magnetic orientation is predicted from structural and energetic considerations.

Etters, R. D.↗

Low gravity synthesis of polymers with controlled molecular configuration

Heterogeneous chemical systems have been studied for the synthesis of isotactic polypropylene in order to establish baseline parameters for the reaction process and to develop sensitive and accurate methods of analysis. These parameters and analytical methods may be used to make a comparison between the polypropylene obtained at one g with that of zero g (gravity). Baseline reaction parameters have been established for the slurry (liquid monomer in heptane/solid catalyst) polymerization of propylene to yield high purity, 98% isotactic polypropylene. Kinetic data for the slurry reaction showed that a sufficient quantity of polymer for complete characterization can be produced in a reaction time of 5 min; this time is compatible with that available on a sounding rocket for a zero-g simulation experiment. The preformed (activated) catalyst was found to be more reproducible in its activity than the in situ formed catalyst.

Heimbuch, A. H.↗

Uniform distribution of BeO particles in Be casting produced in rocket free fall

An experiment at zero-g aboard a NASA sounding rocket was conducted to evaluate the distribution of BeO particles in a Be casting. A distinction is drawn between the downward settling of particles in a quiescent melt, and the velocity gradient collisions of particles in a melt agitated by electromagnetic stirring. A similar experiment was conducted on earth using the same melting and solidification of a 0.922 cm spheroid of HIP-50 as was carried out in space; the only difference arising from the effect of gravity. Under zero-g conditions, the time needed for agglomeration was lengthened considerably, but the result was a casting of more uniform particle distribution.

Wouch, G.↗

Theoretical Performance Characteristics of Sharp Lip Inlets at Subsonic Speeds

A method is presented for the estimation of the subsonic-flight-speed characteristics of sharp-lip inlets applicable to supersonic aircraft. The analysis, based on a simple momentum balance consideration, permits the computation of inlet pressure recovery - mass-flow relations and additive-drag coefficients for forward velocities from zero to the speed of sound. The penalties for operation of a sharp-lip inlet at velocity ratios other than 1.0 may be severe; at lower velocity ratios an additive drag is incurred that is not cancelled by lip suction, while at higher velocity ratios, unavoidable losses in inlet total pressure will result. In particular, at the take-off condition, the total pressure and the mass flow for a choked inlet are only 79 percent of the values ideally attainable with a rounded lip. Experimental data obtained at zero speed with a sharp-lip supersonic inlet model were in substantial agreement with the theoretical results.

Fradenburgh, Evan A↗

Theoretical performance characteristics of sharp-lip inlets at subsonic speeds

A method is presented for the estimation of the subsonic-flight-speed characteristics of sharp-lip inlets applicable to supersonic aircraft. The analysis, based on a simple momentum balance consideration, permits the computation of inlet-pressure-recovery mass-flow relations and additive-drag coefficients for forward velocities from zero to the speed of sound. The penalties for operation of a sharp-lip inlet at velocity ratios other than 1.0 may be severe; at lower velocity ratios an additive drag is incurred that is not cancelled by lip suction, while at higher velocity ratios, unavoidable losses in inlet total pressure will result. In particular, at the take-off condition, the total pressure and the mass flow for a choked inlet are only 79 percent of the values ideally attainable with a rounded lip. The test specimens were polished and unnotched. The manufacturer of the material, the Aluminum Company of America, has made axial-load tests on 24S-T4 and 75S-T6 rod material. The test techniques used at the three laboratories are described in detail; the test results are presented and are compared with each other and with results obtained on unpolished sheet by the National Bureau of Standards. Experimental data obtained at zero speed with a sharp-lip supersonic inlet model were in substantial agreement with the theoretical results. (author)

Fradenburgh, Evan A↗

Yaw and spin effects on high intensity sound generation and on drag of training projectiles with ring cavities

Projectiles containing axisymmetric ring cavities constitute aeroacoustic sources. These produce high intensity tones which are used for coding in the SAWE (Simulation of Area Weapons Effects) system. Experimental data obtained in a free jet facility are presented describing the effects of yaw, spin and geometric projectile parameters on sound pressure and drag. In general, the sound pressure decreases with increasing yaw angle whereas the drag increases. Spin tends to increase sound pressure levels because of a reduction in asymmetry of flow. Drag increases at zero yaw approximately as the 1.5 power of sound wavelength. A significant part of the drag increase appears to be due to energy loss by sound radiation.

Parthasarathy, S. P.↗

Sensitivity of Middle Atmospheric Analysis to the Representation of Gravity Wave Drag

This study examines the sensitivity of middle atmospheric analyses to the representation of gravity wave drag (GWD) in the general circulation model (GCM). A strong sensitivity of temperatures near the stratopause to the inclusion and representation of waves with non-zero phase speeds is isolated; this is consistent with the induced mean meridional circulation. The change (between a control analysis and one with no GWD) decreases with decreasing altitude and has a vertical structure with alternating positive and negative differences that are caused by the constraint on thick-layer radiances offered by near-nadir sounding radiometers. Without the non-zero phase-speed GWI), there is a large observation minus forecast residual that is substantially smaller when these waves are included, indicating the need for these waves in the GCM. Moreover, the sensitivity of analyzed temperatures to the inclusion of these waves reveals the importance of using a non-biased GCM in regions where the observational constraint (thick-layer radiances) is indirect.

Li, Shu-Hua↗

The behavior of superfluid helium in zero gravity

Studies of the behavior of superfluid helium in zero gravity including fluid distribution within the cryostat, thickness of superfluid films, and heat transfer in such films, were conducted in one gravity in the laboratory and in zero-g flights on aircraft and sounding rocket. The studies show that the bulk motions are sufficiently well damped to allow control of their effects on experiments and spacecraft attitude control systems, and that the superfluid films will be able to maintain the high degree of temperature uniformity found in laboratory superfluid helium cryostats. The presentation includes film clips of the motions on the superfluid in zero-g.

Mason, P.↗