Thin Film Growth of Epitaxial Gadolinium Oxide, Gadolinium Yttrium Oxide, and Gadolinium Cerium Oxide by Electrodeposition
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Yttrium oxide (Y{sub 2}O{sub 3}) films with an average crystallite-size (L) ranging from 5 to 40 nm were grown by sputter-deposition onto Si(100) substrates. The optical properties of grown Y{sub 2}O{sub 3} films were evaluated using spectroscopic ellipsometry measurements. The size-effects were significant on the optical constants and their dispersion profiles of Y{sub 2}O{sub 3} films. A significant enhancement in the index of refraction (n) is observed in well-defined Y{sub 2}O{sub 3} nanocrystalline films compared to that of amorphous Y{sub 2}O{sub 3}. A direct, linear L-n relationship found for Y{sub 2}O{sub 3} films suggests that tuning optical properties for desired applications can be achieved by controlling the size at the nanoscale dimensions.
Yttrium oxide (yttria) nanoparticles were successfully synthesized by co-precipitation method. As-synthesized and annealed powders were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), UV-visible (UV-vis), photoluminescence (PL) spectra and Fourier transform infrared spectrometer (FTIR). The XRD results show that the as-prepared sample has mixed phase of Y(OH){sub 3} and yttria (Y{sub 2}O{sub 3}). However, cubic yttrium oxide phase alone is found for annealed samples. The strain values are calculated from Williamson-Hall (W-H) plot for annealed samples. SEM and TEM micrographs show that the samples are composed of aggregated nanoparticles with different shapes and sizes. From the UV-vis spectra, it is found that the position of the absorption peak is shifted towards the lower wavelength side when particle size decreases. In the PL spectra, the broad emission bands are observed between 340 and 380 nm and the presence of metal oxide is confirmed by FTIR spectra.
High-performance p-type carbon nanotube (CNT) transistors utilizing yttrium oxide as gate dielectric are presented by optimizing oxidization and annealing processes. Complementary metal-oxide-semiconductor (CMOS) field-effect-transistors (FETs) are then fabricated on CNTs, and the p- and n-type devices exhibit symmetrical high performances, especially with low threshold voltage near to zero. The corresponding CMOS CNT inverter is demonstrated to operate at an ultra-low supply voltage down to 0.2 V, while displaying sufficient voltage gain, high noise margin, and low power consumption. Yttrium oxide is proven to be a competitive gate dielectric for constructing high-performance CNT CMOS FETs and integrated circuits.
Studies are presented of helium porosity in EP-450 oxide-dispersion-hardened yttrium steel, obtained by electopulse sintering, as a function of the Y{sub 2}O{sub 3} content in comparison with EP-450 matrix steel and dispersion-hardened steel fabricated by hot extrusion. It is found that multiple zones with different types of helium porosity and different zone distribution develop in steel with 1 wt.% Y{sub 2}O{sub 3}; in steel with 0.3 wt.% Y{sub 2}O{sub 3}, there are fewer such zones than in matrix steel and steel obtained by hot extrusion. It is proposed that the extremely nonuniform distribution of porosity over volume and size in steel fabricated by electropulse sintering is associated with the initially strongly defective structure, including residual porosity, as well as with the chromium redistribution between ferrite grains and tempered-martensite grains during the sample preparation process.
The equiatomic CoCrFeMnNi alloy is currently one of the most studied high-entropy alloys. In our previous work, a new grade of CoCrFeMnNi high-entropy alloy with yttria-based particle dispersion was introduced showing improved mechanical properties, especially high-temperature strength and creep rate. In this study, a detailed analysis of room to high-temperature thermal properties was performed, as it is important for defining the future application of the alloy and opening the discussion on tailoring the thermal response. Thermal properties are not well known for the original CoCrFeMnNi alloy or for CoCrFeMnNi with yttria dispersion. As a result of the analysis, thermal properties of both alloys and the effect of the oxide dispersion are discussed. Most of the thermal properties remain unchanged. However, it was found that the presence of 0.3% yttria influences the oxidation rate of CoCrFeMnNi alloy at the initial and intermediate oxidation times. The onset of the oxidation is described in detail. Yttria nano-oxide dispersion and related grain refinement also reduce the microstructural degradation caused by the formation of voids due to outward Mn diffusion.
Thin films of yttrium oxide, Y{sub 2}O{sub 3}, were deposited by reactive sputtering and reactive evaporation to determine their suitability as a host for a rare earth doped planar waveguide upconversion laser. The optical properties, structure, and crystalline phase of the films were found to be dependent on the deposition method and process parameters. X-ray diffraction analysis on the ''as-deposited'' thin films revealed that the films vary from amorphous to highly crystalline with a small broad peak at 29 deg. corresponding to the <222> reflections of Y{sub 2}O{sub 3}. The samples with the polycrystalline structure had a stoichiometry close to bulk cubic Y{sub 2}O{sub 3}. Scanning electron microscopy imaging revealed a regular column structure confirming their crystalline nature. The thin film layers which allowed guiding in both visible and infrared regions had lower refractive indices, higher oxygen content, and a more amorphous structure. Higher oxygen pressures during the deposition lead to a more amorphous layer.
The influence of the size of Y{sub 2}O{sub 3} powder particles on the structure formation and densification of Nd{sup 3+}:Y{sub 3}Al{sub 5}O{sub 12} laser ceramics has been studied. It is shown that the use of 50- and 100-nm yttrium oxide particles makes it possible to synthesize single-phase yttrium aluminum garnet at temperatures of 1200 and 1500°C, respectively, whereas in the case of 5000-nm yttrium oxide particles 2-h exposure at a temperature of 1500°C yields only 80 wt % of the Nd{sup 3+}:Y{sub 3}Al{sub 5}O{sub 12} phase. Bulk swelling of pressed samples during sintering of 2.94Y{sub 2}O{sub 3}-0.06Nd{sub 2}O{sub 3}-5Al{sub 2}O{sub 3} powders with the size ratio of the initial particles R(Al{sub 2}O{sub 3}/Y{sub 2}O{sub 3}) ∼ 5 is observed. The application of different-sized powders (R ∼ 2.5) provides quantitative ratios between phases in the 3Y{sub 2}O{sub 3}-5Al{sub 2}O{sub 3} system at which shrinkage in a temperature range of 20–1500°C is dominant. Laser ceramics 0–2 at % Nd{sup 3+}:Y{sub 3}Al{sub 5}O{sub 12} have been obtained by the solid-phase sintering of oxide powders (R ∼ 2.5). The slope efficiency for 1 at % Nd{sup 3+}:Y{sub 3}Al{sub 5}O{sub 12} laser ceramics is found to be 33%.
In this study, a series of alkali metal yttrium neo-pentoxide ([AY(ONep) 4 ]) compounds were developed as precursors to alkali yttrium oxide (AYO 2 ) nanomaterials. The reaction of yttrium amide ([Y(NR 2 ) 3 ] where R=Si(CH 3 ) 3 ) with four equivalents of H-ONep followed by addition of [A(NR 2 )] (A=Li, Na, K) or A o (A o =Rb, Cs) led to the formation of a complex series of A n Y(ONep) 3+n species, crystallographically identified as [Y 2 Li 3 (μ 3 -ONep)(μ 3 -HONep)(μ-ONep) 5 (ONep) 3 (HONep) 2 ] (1), [YNa 2 (μ 3 -ONep) 4 (ONep)] 2 (2), {[Y 2 K 3 (μ 3 -ONep) 3 (μ-ONep) 4 (ONep) 2 (ηξ-tol) 2 ][Y 4 K 2 (μ 4 -O)(μ 3 -ONep) 8 (ONep) 4 ]•η x -tol]} (3), [Y 4 K 2 (μ 4 -O)(μ 3 -ONep) 8 (ONep) 4 ] (3a), [Y 2 Rb 3 (μ 4 -ONep) 3 (μ-ONep) 6 ] (4), and [Y 2 Cs 4 (μ 6 -O)(μ 3 -ONep) 6 (μ 3 -HONep) 2 (ONep) 2 (η x -tol) 4 ]•tol (5). Compounds 1–5 were investigated as single source precursors to AYOx nanomaterials following solvothermal routes (pyridine, 185 °C for 24h). The final products after thermal processing were found by powder X-ray diffraction experiments to be Y 2 O 3 with variable sized particles based on transmission electron diffraction. Energy dispersive X-ray spectroscopy studies indicated that the heavier alkali metal species were present in the isolated nanomaterials.
We studied mechanical, optical, and lasing parameters of neodymium-doped yttrium oxide ceramics synthesised by using a new technology involving the laser synthesis of nanopowders and their magnetic pulsed compaction. The fracture toughness of ceramics to cracks and its microhardness were measured to be K{sub IC} = 0.9-1.4 MPa m{sup 1/2} and H{sub {nu}} = 11.8 GPa, respectively. Ceramic samples sintered in the temperature range from 1550 to 2050{sup 0}C have the porosity (1-150)x10{sup -4}% and the optical loss coefficient {alpha}{sub 1.07} = 0.03-2.1 cm{sup -1} at a wavelength of 1.07 {mu}m. It is shown that such porosity does not affect the optical loss coefficient of light. Lasing at {approx}1.079 {mu}m with a slope efficiency of 15% was obtained in a 1.1-mm-thick sample pumped by laser diodes. (active media. lasers)
Graphical abstract: The figure shows the SEM photos of the surfaces of the Y{sub 2}O{sub 3} transparent ceramic samples obtained by microwave sintering and vacuum sintering. It is clearly demonstrated that the grain distribution of the vacuum sintering sample is not uniform with the smallest and the largest particle size at about 2 μm and 15 μm respectively, while the grain distribution of microwave sintering sample is uniform with the average diameter at about 2–4 μm (the smallest reported so far) and with no abnormal growth-up or coarsening phenomenon. We have further found out that the smaller the grain size, the higher the mechanical and optical properties. Display Omitted Highlights: ► The microwave sintering temperature of the sample is lower compared with vacuum. ► The microwave sintering time of the sample is shorter compared with vacuum. ► The mechanical properties of the microwave sintering sample is improved greatly. ► The Y{sub 2}O{sub 3} grain of microwave sintering sample is the smallest reported so far. -- Abstract: Yttrium oxide (Y{sub 2}O{sub 3}) transparent ceramics samples have been successfully fabricated by microwave sintering processing at relatively low temperatures. In comparison with the vacuum sintering processing, Y{sub 2}O{sub 3} transparent ceramics can be obtained by microwave sintering at lower sintering temperature and shorter sintering time, and they possess higher transmittances and mechanical properties. The technologies of low-temperature microwave sintering and the relationships of the microstructures and properties of the specified samples have been investigated in detail. We have found out that the low-temperature microwave sintering technique has its obvious advantages over the conventional methods in manufacturing yttrium oxide transparent ceramics.
Radiolysis of water produces hydrogen gas (H2), posing safety issues for nuclear reactors. Metal oxides can impact H2 formation when water is present on metal oxide surfaces. This presentation focuses on the development of a controllable synthesis of spherical yttrium oxide (Y2O3), that later will be tested for H2 production in water radiolysis. Y2O3 was synthesized via hydrothermal hydrolysis precipitation to form yttrium hydroxide (Y(OH)3), followed by high temperature decomposition to form Y2O3. Various synthesis conditions were tested to determine their impact on particle morphology including reaction time, cooling rate, reactant concentration, and inert atmospheres. Through short reaction times and rapid cooling rate, spherical, relatively uniform particles of 350 nm were obtained. Despite inert atmospheres, carbonate formation occurred in all particles. A calcination temperature of 800°C is necessary to remove impurities. Future work will aim to reduce carbonate formation and improve particle uniformity. The synthetic procedure will be translated to other metal ions to study their impact on interfacial radiolysis.
Neodymium- or ytterbium-doped laser ceramics with a disordered crystal-field structure formed by introduction of iso- and heterovalent elements into yttrium oxide are studied. It is shown that these additives broaden the spectral band of laser transitions, which makes it possible to use ceramics as active laser media emitting ultrashort pulses. Lasing was obtained in several samples of this ceramics. At the same time, it is shown that addition of zirconium and hafnium stimulates the Foerster quenching of upper laser levels and pump levels. (extreme light fields and their applications)
The process of energy transfer (ET) between optically active ions has been widely studied to improve the optical efficiency of a system for different applications, from lighting and photovoltaics to silicon microphotonics. In this work, we report the influence of Bi on the Er optical emission in erbium-yttrium oxide thin films synthesized by magnetron co-sputtering. We demonstrate that this host permits to well dissolve Er and Bi ions, avoiding their clustering, and thus to stabilize the optically active Er{sup 3+} and Bi{sup 3+} valence states. In addition, we establish the ET occurrence from Bi{sup 3+} to Er{sup 3+} by the observed Bi{sup 3+} PL emission decrease and the simultaneous Er{sup 3+} photoluminescence (PL) emission increase. This was further confirmed by the coincidence of the Er{sup 3+} and Bi{sup 3+} excitation bands, analyzed by PL excitation spectroscopy. By increasing the Bi content of two orders of magnitude inside the host, though the occurrence of Bi-Bi interactions becomes deleterious for Bi{sup 3+} optical efficiency, the ET process between Bi{sup 3+} and Er{sup 3+} is still prevalent. We estimate ET efficiency of 70% for the optimized Bi:Er ratio equal to 1:3. Moreover, we have demonstrated to enhance the Er{sup 3+} effective excitation cross section by more than three orders of magnitude with respect to the direct one, estimating a value of 5.3 × 10{sup −18} cm{sup 2}, similar to the expected Bi{sup 3+} excitation cross section. This value is one of the highest obtained for Er in Si compatible hosts. These results make this material very promising as an efficient emitter for Si-compatible photonics devices.
The increased use of engineered nanoparticles (NPs) has caused new concerns about the potential exposure to biological systems and the potential risk that these materials may pose on human health. Here, we examined the effects of exposure to different concentrations (0–50 µg/mL) and incubation times (10 hours, 24 hours, or 48 hours) of yttrium oxide (Y 2 O 3 ) NPs on human embryonic kidney (HEK293) cells. Changes in cellular morphology, cell viability, cell membrane integrity, reactive oxygen species levels, mitochondrial membrane potential, cell death (apoptosis and necrosis), and the DNA damage after NP exposure were compared to the effects seen following incubation with paraquat, a known toxicant. The 24-hour inhibitory concentration 50 (IC 50 ) of Y 2 O 3 NPs (41±5 nm in size) in the HEK293 cells was found to be 108 µg/mL. Incubation with Y 2 O 3 NPs (12.25–50 µg/mL) increased the ratio of Bax/Bcl-2, caspase-3 expression and promoted apoptotic- and necrotic mediated cell death in both a concentration and a time-dependent manner. Decreases in cell survivability were associated with elevations in cellular reactive oxygen species levels, increased mitochondrial membrane permeability, and evidence of DNA damage, which were consistent with the possibility that mitochondria impairment may play an important role in the cytotoxic response. These data demonstrate that the Y 2 O 3 NP exposure is associated with increased cellular apoptosis and necrosis in cultured HEK293 cells.
Research highlights: {yields} Y{sub 2}O{sub 3} fibers were synthesized by hydrothermal reaction followed by calcination. {yields} Y(OH){sub x}Cl{sub 3-x}.yH{sub 2}O was received from hydrothermal reaction. {yields} Y{sub 2}O{sub 3} fibers showed outstanding high-temperature stability. -- Abstract: Yttrium oxide fibers have been synthesized via hydrothermal reaction and subsequent thermal treatment using yttrium chloride as precursor. The products before and after the thermal treatment were characterized by powder X-ray diffractions (XRD), scanning electron microscopy (SEM), ion-chromatograph analysis, and thermogravimetry and differential thermal analysis (TG-DTA). The fiber diameter ranged from 100 to 300 nm, while the length was up to tens of microns. It was found that the chemical composition and morphology of the products were closely related to the pH value of reaction solution, and fibrous products could be obtained at pH 9.5-10.25. These oxide fibers exhibited outstanding high-temperature stability, which maintained their morphology at temperature up to 1400 {sup o}C.
Graphical abstract: IR transmittance of various transparent conductive materials (RYO films grown under RT, 400 °C and 600 °C, ITO films [2], Carbon Nano tube films [11], metal/dielectric multilayers [12]). - Highlights: • Y{sub 2}O{sub 3}:Ru (RYO) films were prepared on ZnS substrates by reactive magnetron sputtering. • Ru doping significantly decreases the resistivity and extends the transparent range. • Optical and electrical properties of RYO films can be tuned by substrate temperatures. • The RYO films exhibit excellent far-IR transmittance and electrical property. - Abstract: Highly infrared transparent conductive ruthenium doped yttrium oxide (RYO) films were deposited on zinc sulfide and glass substrates by reactive magnetron sputtering. The structural, optical, and electrical properties of the films as a function of growth temperature were studied. It is shown that the sputtered RYO thin films are amorphous and smooth surface is obtained. The infrared transmittance of the films increases with increasing the growth temperature. RYO films maintain greater than ∼65% transmittance over a wide wavelength range from 2.5 μm to 12 μm and the highest transmittance value reaches 73.3% at ∼10 μm. With increasing growth temperature, the resistivity changed in a wide range and lowest resistivity of about 3.36 × 10{sup −3} Ω cm is obtained at room temperature. The RYO thin films with high conductivity and transparency in IR spectral range would be suitable for infrared optical and electromagnetic shielding devices.
Background: The potential transfer of engineered nanoparticles (ENPs) from plants into the food chain has raised widespread concerns. In order to investigate the effects of ENPs on plants, young cabbage plants (Brassica oleracea) were exposed to a hydroponic system containing yttrium oxide (yttria) ENPs. The objective of this study was to reveal the impacts of NPs on plants by using K-edge subtraction imaging technique. Results: Using synchrotron dual-e nergy X-ray micro-tomography with K-edge subtraction technique, we studied the uptake, accumulation, distribution and concentration mapping of yttria ENPs in cabbage plants. It was found that yttria ENPs were uptaken by the cabbage roots but did not effectively transferred and mobilized through the cabbage stem and leaves. This could be due to the accumulation of yttria ENPs blocked at primary-lateral-root junction. Instead, non-yttria minerals were found in the xylem vessels of roots and stem. Conclusions: Synchrotron dual-energy X-ray micro-tomography is an effective method to observe yttria NPs inside the cabbage plants in both whole body and microscale level. Furthermore, the blockage of a plant's roots by nanoparticles is likely the first and potentially fatal environmental effect of such type of nanoparticles.