Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “XAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Direct measurement of covalent three-center, two-electron M–H–B bonding in Zr and Hf borohydrides using B K-edge XAS

Metal borohydride complexes have long been the subject of intense fundamental interest because of their unconventional metal–ligand bonding that occurs via three-center, two-electron M–H–B bonds. This type of bonding implies significant delocalization of electron density over all three atoms, but the degree of orbital mixing between the metal and boron has been difficult to assess by direct experimental means. Herein, we demonstrate how ligand K-edge X-ray absorption spectroscopy (XAS) conducted at the B K-edge yields evidence of significant covalent M–H–B bonding with Zr and Hf. To accommodate the B K-edge XAS studies, which were conducted under ultra-high vacuum (<10 −8 torr), we prepared a series of new [Zr(RBH 3 ) 4 ] and [Hf(RBH 3 ) 4 ] complexes with substituents that attenuate volatility (R = benzyl, phenyl, mesityl, 2,4,6-triisopropylphenyl, and anthryl). 1 H and 11 B NMR spectroscopy, IR spectroscopy, and single-crystal X-ray diffraction (XRD) studies revealed metal and ligand dependent differences in the BH 3 chemical shifts that correlate to changes in M−B distances and select B–H vibrational stretching modes. The B K-edge XAS spectra of the Zr and Hf complexes yielded a pre-edge feature that was assigned as B 1s → M–H–B π* based on comparison to time-dependent density functional theory (TDDFT) calculations. The pre-edge transitions appear due to covalent mixing between boron and the metal, thereby demonstrating how B K-edge XAS can provide direct evidence of covalent three-center, two electron M–H–B bonding in borohydride complexes using boron as a spectroscopic reporter.

Hansen, Hannah M. [University of Iowa, Iowa City, ↗
DOE OSTI2025

A simple and practical wax-encapsulation method for air-sensitive XAS samples

To facilitate X-ray absorption spectroscopy (XAS) measurements of air-sensitive samples, we present a simple method in which materials are encased in common paraffin wax to protect them from air and moisture. We demonstrate the efficacy of this approach using a highly reducing, air- and moisture-sensitive uranium(III) complex, the tris(amide) U[N(SiMe 3 ) 2 ] 3 (1). When finely dispersed in a boron nitride matrix and subsequently encased in inert paraffin wax, samples of 1 remain stable with no visible or spectroscopic degradation after several days under ambient conditions. The viability of this method for XAS measurements was further evaluated across a series of uranium compounds, ranging from uranyl species to highly air- and moisture-sensitive molecular complexes, at the uranium L 3 -edge. Edge energy determinations were highly reproducible (±0.1 eV between replicates) and, where available, showed excellent agreement with literature values. In conclusion, this low-cost, effective, and versatile method offers a viable solution for XAS studies of air-sensitive compounds and materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Flash Communication: Boron K-edge XAS and TDDFT Studies of Covalent Metal–Ligand Bonding in Ni(C 2 B 9 H 11 ) 2

Ligand K-edge X-ray absorption spectroscopy (XAS), a technique that can measure variations in covalent metal–ligand bonding, has rarely been used to assess covalency in complexes containing metal–boron bonds. Here we describe ligand K-edge XAS and TDDFT studies of the Ni dicarbollide complex Ni(C 2 B 9 H 11 ) 2 (1) and the Ni-free salt (HNMe 3 )(C 2 B 9 H 12 ) (L1). The XAS spectrum for 1 reveals a pre-edge feature indicative of covalent Ni–B bonding, which is corroborated by time-dependent density functional theory (TDDFT) calculations and comparative analysis to L1 and inner-shell electron energy loss spectroscopy (ISEELS) collected on the same Ni complex.

Boron↗
DOE OSTI2024

Prediction of the Cu oxidation state from EELS and XAS spectra using supervised machine learning

Abstract Electron energy loss spectroscopy (EELS) and X-ray absorption spectroscopy (XAS) provide detailed information about bonding, distributions and locations of atoms, and their coordination numbers and oxidation states. However, analysis of XAS/EELS data often relies on matching an unknown experimental sample to a series of simulated or experimental standard samples. This limits analysis throughput and the ability to extract quantitative information from a sample. In this work, we have trained a random forest model capable of predicting the oxidation state of copper based on its L-edge spectrum. Our model attains an R 2 score of 0.85 and a root mean square error of 0.24 on simulated data. It has also successfully predicted experimental L-edge EELS spectra taken in this work and XAS spectra extracted from the literature. We further demonstrate the utility of this model by predicting simulated and experimental spectra of mixed valence samples generated by this work. This model can be integrated into a real-time EELS/XAS analysis pipeline on mixtures of copper-containing materials of unknown composition and oxidation state. By expanding the training data, this methodology can be extended to data-driven spectral analysis of a broad range of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

XRF-XFS-XAS-Auto v1.0 - Beta release

This software allows to analyze XRF maps, XFS spectra and XAS spectra collected at the Advanced Light Source's Beamline 10.3.2. Features include: 1) XRF maps: - process XRF maps, all elemental maps are saved as bmp automatically and labeled with the incident energy used, the scale bar is also labeled and can be controlled. - XRF elemental correlation plots, save the correlation plots automatically - Extract single or multiple transects in XRF maps on one or several regions of interest, each transect profile is numbered and saved in a corresponding folder, along with the corresponding maps showing transect location. 2) XFS spectra - save in log10 scale the XFS spectra, either a single or multiple files all at once. The files are saved as .bmp. - XFS spectra are labeled according to tabulated fluorescence emission lines. 3) XAS spectra - allows to plot individual scalers in the raw data. - allows calibration of the spectra using an Io internal glitch present in all spectra and performing 1st derivative. - Least-square linear combination fitting of XANES or extended XANES spectra using a database of standards using 1, 2 or 3 components maximum. It also provides the 5 top combinations and provide the user for the possibility of saving the 2nd, 3rd, 4th and 5th best combinations in addition to the best one. The processed spectra (pre-edge background substracted, post-edge normalized), the fits and residuals are automatically saved. A table of the component, with fit% and SSN is provided and saved automatically as well.

Fakra, Sirine↗
DOE OSTI2024

Prediction of the Cu Oxidation State from EELS and XAS Spectra Using Supervised Machine Learning

Electron energy loss spectroscopy (EELS) and X-ray absorption spectroscopy (XAS) provide detailed information about distributions and locations of atoms, their coordination numbers and oxidation states, and the bonding characteristics [1]. However, analysis of XAS/EELS data often relies on matching the spectra of an unknown experimental sample to a series of simulated or experimental spectra of standard samples. Here, this limits analysis throughput and the ability to extract quantitative information from a sample.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Operando XAS and DFT Uncover Structure-Performance Relationships in Re/TiO 2 for Selective CO 2 Hydrogenation to Methanol

The conversion of CO 2 into value-added chemicals, such as methanol, offers a promising pathway toward a renewable energy future. However, a precise kinetic control and a highly selective catalyst are necessary to overcome the thermodynamic preference for CO 2 hydrogenation to methane. Rhenium-based catalysts, particularly Re/TiO 2 , demonstrate high activity and selectivity for methanol under high-pressure conditions. For example, at 100 bar and 200 °C, a methanol selectivity of 97−99% was obtained. Catalysts with 1 wt % Re and 5 wt % Re/ TiO 2 were used to study the effect of cluster sizes. At 250 °C, the 1 wt % catalyst achieves 97% selectivity at 23% conversion, whereas 5 wt % Re/TiO 2 achieves 74% selectivity at 40% conversion, corresponding to a drop in space-time yield from 65 to 16 g CH 3 OH ·g Re −1 ·h −1 , respectively. X-ray absorption spectroscopy provided insights into the structure of the active sites, while density functional theory calculations revealed the effects of cluster size on the energy barriers for H 2 activation, CH 3 OH dissociation, and CH 3 OH desorption, all of which directly influence conversion and selectivity. These results underscore the importance of balancing cluster size for optimal catalyst performance and provide insights into the design of efficient and selective catalysts for renewable methanol production.

XAS↗
DOE OSTI2025

OmniXAS: A universal deep-learning framework for materials x-ray absorption spectra

X-ray absorption spectroscopy (XAS) is a powerful characterization technique for probing the local chemical environment of absorbing atoms. However, analyzing XAS data presents significant challenges, often requiring extensive, computationally intensive simulations, as well as significant domain expertise. These limitations hinder the development of fast, robust XAS analysis pipelines that are essential in high-throughput studies and for autonomous experimentation. Here, we address these challenges with OmniXAS, a framework that contains a suite of transfer learning approaches for XAS prediction, each uniquely contributing to improved accuracy and efficiency, as demonstrated on the K-edge spectra database covering eight 3⁢d transition metals (Ti–Cu). The OmniXAS framework is built upon three distinct strategies. First, we use M3GNet [Nat. Comput. Sci. 2, 718 (2022)] to derive latent representations of the local chemical environment of absorption sites as input for XAS prediction, achieving significant improvements over conventional featurization techniques. Second, we employ a hierarchical transfer learning strategy, training a universal multitask model across elements before fine-tuning for element-specific predictions. Models based on this cascaded approach after elementwise fine-tuning outperform element-specific models by up to 69%. Third, we implement cross-fidelity transfer learning, adapting a universal model to predict spectra generated by simulation of a different fidelity with a much higher computational cost. This approach improves prediction accuracy by up to 11% over models trained on the target fidelity alone. Our approach significantly boosts the throughput of XAS modeling by orders of magnitude as compared to first-principles simulations and is extendable to XAS prediction for a broader range of elements. The proposed transfer learning framework is generalizable to enhance deep-learning models that target other properties in materials research.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Advancing AI-Driven Analysis in X-ray Absorption Spectroscopy: Spectral Domain Mapping and Universal Models

In recent years, rapid progress has been made in developing artificial intelligence (AI) and machine learning (ML) methods for X-ray absorption spectroscopy (XAS) analysis. Compared to traditional XAS analysis methods, AI/ML approaches offer dramatic improvements in efficiency and help eliminate human bias. To advance this field, we advocate an AI-driven XAS analysis pipeline that features several interconnected key building blocks: benchmarks, workflows, databases, and AI/ML models. Specifically, we present two case studies for XAS ML. In the first study, we demonstrate the importance of reconciling the discrepancies between simulation and experiment using spectral domain mapping (SDM). Our ML model, which is trained solely on simulated spectra, predicts an incorrect oxidation state trend for Ti atoms in a combinatorial zinc titanate film. After transforming the experimental spectra into a simulation-like representation using SDM, the same model successfully recovers the correct oxidation state trend. In the second study, we explore the development of universal XAS ML models that are trained on the entire periodic table, which enables them to leverage common trends across elements. Looking ahead, we envision that an AI-driven pipeline can unlock the potential of real-time XAS analysis to accelerate scientific discovery.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Probing Terra Incognita of Ni–P Catalysts: Operando Explorations during Hydrogen Evolution Reaction

We have developed two Ni phosphide preparation methods allowing operando XAS surface-sensitive studies of well-defined bulk systems. For Ni K-edge XAS, a Ni 2 P phase-pure powder was sintered into a high-density pellet and polished for grazing incidence XAS. Ni sites were mildly affected by the acidic electrolyte prior to the HER, while the applied cathodic potential caused the reduction of Ni surface states beyond the states of as-prepared Ni 2 P. The computed fully H-covered Ni 2 P [0001] model describes the difference in the operando Ni K-edge GIXAS spectrum well. Upon turning the applied bias off, the Ni sites became immediately oxidized, forming NiO on the surface. Thus, the active phase during the HER is covalent Ni 0 close to that in the intermetallic phosphides, and Ni 2+ oxides formed after, and not during, the HER. For P K-edge XAS, Ni foam was phosphorized to form a thin Ni 3 P layer while preserving its high surface area. Upon immersion in the acidic electrolyte, the P sites underwent removal of P 5+ phosphates and formed new P coordination, possibly due to the adsorption of protons from the electrolyte. These new P surface states were not affected by turning the cathodic current on and off as soon as the sample was immersed in the acidic electrolyte. However, the removal of the sample from the electrochemical cell and drying in air resulted in substantial depletion and oxidation of surface P. Echoing the observed Ni site chemistry during HER, XAS and XPS suggest that the in situ active P sites are different from the oxidized P states observed under ex situ conditions.

Kong, Seongyoung [Iowa State Univ., Ames, IA (Unit↗
DOE OSTI2026

Adapted Cell Design for the Operando X‑Ray Absorption Study of a Structurally Evolving Cu Nanoparticle Ensemble during the CO2 Electroconversion to Multicarbon Products

An improved understanding of the materials that will sustain the future of energy production, storage, and delivery calls for better characterization tools. Operando characterization methods have thus become essential for investigating electrocatalytic materials. Without their resulting insights, the study of highly performing catalysts post-mortem cannot viably facilitate the further development of functional catalysts. Herein, we present an operando electrochemical cell designed for hard X-ray absorption spectroscopy (XAS) and specifically adapted to the study of an electrocatalytically active Cu nanoparticle ensemble. So far, this nanocatalyst has proven to pose quite a challenge to characterize due to its unique structural dynamics. Adopting a design comparable to the H-cell employed for all activity testing, we report the satisfactory translation of the active site formation into an XAS-compatible cell. The simultaneous collection of CO2-derived products during XAS characterization enabled the operando characterization of this CO2-reducing active structure. We report a Cu–Cu coordination number of the first scattering path higher than suggested in our previous studies, highlighting the importance of monitoring metastable nanoelectrocatalysts in operando. This study illustrates important caveats for the electrocatalysis community when considering the application of operando XAS. Our results highlight that the sample size, homogeneity, and stability determine how to interpret the measured signal. Considering these parameters carefully, the operando EXAFS results confirm the exceptional undercoordinated character of the Cu nanoparticle ensemble during CO2 reduction to C2+ products.

Louisia, Sheena↗
DOE OSTI2025

X-ray Absorption Spectroscopy of Dilute Metalloenzymes at X-ray Free-Electron Lasers in a Shot-by-Shot Mode

X-ray absorption spectroscopy (XAS) of 3d transition metals provides important electronic structure information for many fields. However, X-ray-induced radiation damage under physiological temperature has prevented using this method to study dilute aqueous systems, such as metalloenzymes, as the catalytic reaction proceeds. Here we present a new approach to enable operando XAS of dilute biological samples and demonstrate its feasibility with K-edge XAS spectra from the Mn cluster in photosystem II and the Fe–S centers in photosystem I. This approach combines highly efficient sample delivery strategies and a robust signal normalization method with high-transmission Bragg diffraction-based spectrometers at X-ray free-electron lasers (XFELs) in a damage-free, shot-by-shot mode. These photon-out spectrometers have been optimized for discriminating the metal Mn/Fe Kα fluorescence signals from the overwhelming scattering background present on currently available detectors for XFELs that lack suitable energy discrimination. We quantify the enhanced performance metrics of the spectrometer and discuss its potential applications for acquiring time-resolved XAS spectra of biological samples during their reactions at XFELs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Chiral effects at the metal center in Fe(III) spin crossover coordination salts

Evidence of chirality was observed at the Fe metal center in Fe(III) spin crossover coordination salts [Fe(qsal) 2 ][Ni(dmit) 2 ] and [Fe(qsal) 2 ](TCNQ) 2 from x-ray absorption (XAS) spectroscopy at the Fe 2p 3/2 core threshold. Based on the circularly polarized XAS data, the x-ray natural circular dichroism for [Fe(qsal) 2 ][Ni(dmit) 2 ] and [Fe(qsal) 2 ](TCNQ) 2 is far stronger than seen for [Fe(qsal) 2 ]Cl suggesting this natural circular dichroism signature is a ligand effect rather than a result of just a loss of octahedral symmetry on the Fe core. The larger the chiral effects in the Fe 2p core to bound XAS, the greater the perturbation of the Fe 2p 3/2 to 2p 1/2 spin–orbit splitting seen in the XAS spectra.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Unveiling X-ray absorption signatures of boron nitride via first-principles simulation and machine learning

Boron nitride (BN) allotropes hold great promise in many advanced applications ranging from optical and photonic devices to energy storage and battery systems to tribological components. The diverse functionalities of this material stem from BN’s highly tunable structural and electronic properties, which are governed by the versatile boron–nitrogen bonding configurations. Exploring the structural landscape of BN can unveil novel structures possessing unique properties suited for specific applications, therefore accelerating the design of next-generation advanced functional materials. In this work, we leverage boron K-edge X-ray absorption spectroscopy (XAS) as an effective probe for local structural features and chemical environments. A total of 210 BN crystal structures are generated via analogies to the extensive array of carbon allotropes, and XAS is simulated for each unique local motif within the resulting collection of structures. A mapping between structural features and spectral signatures was established by synergizing first-principle simulations with data-driven based post-analysis approaches. Specifically, we developed a neural network model that can satisfactorily predict spectra line shapes from local structural descriptors. Toward automatic spectroscopic interpretation of any new BN structures, supervised machine learning models, trained on this structure–spectrum dataset, can accurately infer local coordination environments from simulated XAS, highlighting the strength of this unique approach of combining high-fidelity first-principles simulation and machine-learning to accelerate target design of novel BN materials via rational understanding of local structure-spectrum correlations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electronic Structure and Safety Insights into Prussian Blue Analog Cathode Behavior at Elevated Temperatures in Sodium-Ion Batteries

Prussian blue analogs (PBAs) represent promising cathode materials for sodium-ion batteries (SIBs) due to their high theoretical capacity, open framework structure, and use of earth-abundant elements. However, the high-temperature structural evolution, water content effects, and thermal safety of PBAs, particularly in charged states, remain poorly understood, hindering their practical deployment. Here, we investigate Na 2 Fe[Fe(CN) 6 ]·2H 2 O using thermogravimetric analysis (TGA), ex situ and in situ temperature-dependent X-ray absorption spectroscopy (XAS), and accelerated rate calorimetry (ARC). TGA and ex situ XAS confirm water loss between 150 and 200 °C, resulting in Fe 2+ oxidation, enhanced local symmetry, and uniform redox behavior that improves electrochemical performance. In situ XAS reveals irreversible structural changes above 240 °C, including ligand loss, Fe site distortion, and increased disorder, while ARC on charged electrodes shows minimal self-heating rates (<0.1 °C/min) up to 300 °C, indicating exceptional thermal stability without lattice oxygen release. These insights elucidate PBA thermal dynamics, demonstrating improved electrochemical performance of water-deficient PBAs and informing future material design and safety assessment for SIB applications.

batteries↗
DOE OSTI2025

First-Principles Simulations Correlating X-ray Absorption Spectroscopy Features to Point Defects in h -BN

Hexagonal boron nitride (h-BN) is a promising material for a range of emerging applications in electronics, quantum information technology, and energy storage. Soft X-ray absorption spectroscopy (XAS) is powerful to reveal atomic details of BN, especially in the presence of defects. However, correlating XAS spectral features with specific defect types remains elusive. In this Letter, we report B K-edge XAS measurements of sputter-deposited turbostratic h-BN films and use a combination of first-principles spectroscopic simulations and analysis of detailed electronic structure and local charge transfer characteristics to elucidate their unique spectroscopic features. Our results show that the two main defect-related peaks, between the main π* resonances of h-BN and B2O3, as typically observed in BN films deposited by energetic condensation or bombarded with energetic ions, are associated with electronic states of H-passivated B atoms bonded to one and two oxygen impurity atoms, respectively. These conclusions hold significant implications for applications relying on defect-mediated properties of h-BN.

chemical structure↗
DOE OSTI2024

Catalytic Water Electrolysis by Co–Cu–W Mixed Metal Oxides: Insights from X-ray Absorption Spectroelectrochemistry

Mixed metal oxides (MMOs) are a promising class of electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Despite their importance for sustainable energy schemes, our understanding of relevant reaction pathways, catalytically active sites, and synergistic effects is rather limited. Here, we applied synchrotron-based X-ray absorption spectroscopy (XAS) to explore the evolution of the amorphous Co–Cu–W MMO electrocatalyst, shown previously to be an efficient bifunctional OER and HER catalyst for water splitting. Ex situ XAS measurements provided structural environments and the oxidation state of the metals involved, revealing Co 2+ (octahedral), Cu + / 2+ (tetrahedral/square-planar), and W 6+ (octahedral) centers. Operando XAS investigations, including X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), elucidated the dynamic structural transformations of Co, Cu, and W metal centers during the OER and HER. The experimental results indicate that Co 3+ and Cu 0 are the active catalytic sites involved in the OER and HER, respectively, while Cu 2+ and W 6+ play crucial roles as structure stabilizers, suggesting strong synergistic interactions within the Co–Cu–W MMO system. In conclusion, these results, combined with the Tafel slope analysis, revealed that the bottleneck intermediate during the OER is Co 3+ hydroperoxide, whose formation is accompanied by changes in the Cu–O bond lengths, pointing to a possible synergistic effect between Co and Cu ions. Our study reveals important structural effects taking place during MMO-driven OER/HER electrocatalysis and provides essential experimental insights into the complex catalytic mechanism of emerging noble-metal-free MMO electrocatalysts for full water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗