Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Water Purification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Porous Materials for Water Purification

Water pollution is a growing threat to humanity due to the pervasiveness of contaminants in water bodies. Significant efforts have been made to separate these hazardous components to purify polluted water through various methods. However, conventional remediation methods suffer from limitations such as low uptake capacity or selectivity, and current water quality standards cannot be met. Recently, advanced porous materials (APMs) have shown promise in improved segregation of contaminants compared to traditional porous materials in uptake capacity and selectivity. These materials feature merits of high surface area and versatile functionality, rendering them ideal platforms for the design of novel adsorbents. Here, this Review summarizes the development and employment of APMs in a variety of water treatments accompanied by assessments of task-specific adsorption performance. Finally, we discuss our perspectives on future opportunities for APMs in water purification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Porous Materials for Water Purification

Abstract Water pollution is a growing threat to humanity due to the pervasiveness of contaminants in water bodies. Significant efforts have been made to separate these hazardous components to purify polluted water through various methods. However, conventional remediation methods suffer from limitations such as low uptake capacity or selectivity, and current water quality standards cannot be met. Recently, advanced porous materials (APMs) have shown promise in improved segregation of contaminants compared to traditional porous materials in uptake capacity and selectivity. These materials feature merits of high surface area and versatile functionality, rendering them ideal platforms for the design of novel adsorbents. This Review summarizes the development and employment of APMs in a variety of water treatments accompanied by assessments of task‐specific adsorption performance. Finally, we discuss our perspectives on future opportunities for APMs in water purification.

Song, Yanpei↗
DOE OSTI2016

Performance of photocatalyst based carbon nanodots from waste frying oil in water purification

Carbon Nanodots (C-Dots) from waste frying oil could be used as a photocatalyst in water purification with solar light irradiation. Performance of C-Dots as a photocatalyst was tested in the process of water purification with a given synthetic sewage methylene blue. The tested was also conducted by comparing the performance C-Dots made from frying oil, waste fryng oil as a photocatalyst and solution of methylene blue without photocatalyst C-Dots. Performance of C-Dots from waste frying oil were estimated by the results of absorbance spectrum. The results of measurement absorbance spectrum from the process of water purification with photocatalyst C-Dots showed that the highest intensity at a wavelength 664 nm of methylene blue decreased. The test results showed that the performance of photocatalyst C-Dots from waste frying oil was better in water purification. This estimated that number of particles C-dots is more in waste frying oil because have experieced repeated the heating process so that the higher particles concentration make the photocatalyst process more effective. The observation of the performance C-Dots from waste frying oil as a photocatalyst in the water purification processes become important invention for solving the problems of waste and water purification.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

A resonant electro-physical transmutation method for water purification

We present an electro-transmutation (ET) method of water purification using the Quantum Kinetic Fusor™. Electrolysis experiments were performed with residential well water and seawater coupled with two different electrode materials—stainless steel and aluminum—to test the effectiveness of ET in removing contaminants and altering the physiochemistry (e.g., pH, alkalinity) and isotopic composition of water. ET effectively removed contaminants at power inputs as low 0.142 mA cm –2 , i.e., 1.9–4.2 watts, which is substantially lower than other electrochemical techniques. The ET process also reduces, and in some cases eliminates, electrode surface area degradation. This outcome is outside the field of traditional Faraday electrolysis, further distinguishing the ET process as potentially more cost-effective than other water purification methods. Importantly, the experiments reveal ET is an exceptionally low input energy generator. This finding is based on the presence of exotic x-rays (Bremsstrahlung) emissions during operation (1–20 KeV).

42 ENGINEERING↗
DOE OSTI2019

System and method of water purification utilizing an ionomer membrane

A water purification system utilizes an ionomer membrane and mild vacuum to draw water from source water through the membrane. A water source may be salt water or a contaminated water source. The water drawn through the membrane passes across the condenser chamber to a condenser surface where it is condensed into purified water. The condenser surface may be metal or any other suitable surface and may be flat or pleated. In addition, the condenser surface may be maintained at a lower temperature than the water on the water source side of the membrane. The ionomer membrane may be configured in a cartridge, a pleated or flat plate configuration. A latent heat loop may be configured to carry the latent heat of vaporization from the condenser back to the water source side of the ionomer membrane. The source water may be heated by a solar water heater.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

System and method of water purification utilizing an ionomer membrane

A water purification system utilizes an ionomer membrane and mild vacuum to draw water from source water through the membrane. A water source may be salt water or a contaminated water source. The water drawn through the membrane passes across the condenser chamber to a condenser surface where it is condensed into purified water. The condenser surface may be metal or any other suitable surface and may be flat or pleated. In addition, the condenser surface may be maintained at a lower temperature than the water on the water source side of the membrane. The ionomer membrane may be configured in a cartridge, a pleated or flat plate configuration. A latent heat loop may be configured to carry the latent heat of vaporization from the condenser back to the water source side of the ionomer membrane. The source water may be heated by a solar water heater.

Bahar, Bamdad↗
DOE OSTI2022

Water purification system

A method and system for water purification includes a particle accelerator configured to generate a particle beam and a conduit configured to be substantially in line with the particle beam wherein said electron beam is incident on a fluid flowing through the conduit. The electron beam can be oriented to be substantially head on to the direction of flow of the fluid in the conduit. A shielding assembly can be configured around the conduit. A cartridge filtering system and contaminant filtering system can be provided to remove additional contaminants.

Geelhoed, Michael↗
DOE OSTI2015

Switchable Polarity Solvent Forward Osmosis Water Purification Technology for Treatment of Produced Water

Process and economic modeling suggest that the SPS-FO water treatment process can purify approximately 90% of a produced water feed stream with salinity similar to that of seawater. If the produced water feed stream is supplied at a temperature of ~100°C, SPS-FO process thermal energy requirements could be met entirely through use of heat provided by the feed stream. If the produced water feed stream is supplied at a temperature in excess of ~120°C, SPS-FO process electrical and thermal energy requirements could be met using energy in the feed stream. Though this process is likely to have higher costs than RO, it has an advantage in that it can recover a larger fraction of the feed stream over a wider range of salinity. This can make it economically attractive in offsetting disposal costs of co-produced waters. Bench scale testing currently being performed at the Idaho National Laboratory is advancing SPS-FO technology with the goal of field testing a prototype system in coming years.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Poly(ether‐block‐amide) membrane with deformability and adjustable surface hydrophilicity for water purification

Abstract Freshwater resources are currently insufficient, and another form of freshwater resources, namely, ice, is very interesting except for the issue of how to use new materials for effective purification during the processing procedure. In this article, a new membrane material with multisize pore structure in the cross‐section and intact thin skin layer on the upper and lower surfaces was successfully prepared by adding porogen, filler and setting heating environment during the phase separation process. The membrane exhibits excellent axial deformability, and its elongation at break can reach to 160% strain. Meanwhile, they all show elastic deformation behavior in the range from −60 to 100°C. Even if high content of hydrophobic filler is compounded into these membranes, that is, 5.7 wt% carbon tube content, water contact angle of membrane's surface is only 72.5°, demonstrating obvious hydrophilicity. In addition, in the water purification process, the adsorption rate constant reached ideal value of 0.26 s −1 , and the equilibrium adsorption capacity was about 2.8 g/g, showing fast and efficient water purification ability. In the mode of external heating source or the membrane's heat dissipation, these prepared membranes can melt the ice to obtain purified water and exhibit a controllable purification ability in this process.

Ge, Chengbiao↗
DOE OSTI2021

Plasmonics-Enhanced UV Photocatalytic Water Purification

Titanium dioxide (TiO 2 ) is commonly used for photocatalytic decomposition of organic contaminants for the purpose of water purification. One promising method to enhance TiO 2 photocatalysis is the incorporation of surface plasmon resonance on its surface where photocatalytic reactions take place. Herein, a novel methodology using plasmonically tuned aluminum nanostructures to enhance the rate of photodecomposition of aqueous methyl orange is demonstrated. These nanostructures are tuned to the TiO 2 band gap in the UV regime and patterned on TiO 2 -coated substrates using nanosphere lithography. Compared to a blank TiO 2 film, the plasmonics is found to enhance the initial TiO 2 photocatalytic rate by up to 10 times, and further enhancement is possible upon refinement of the plasmonic technology.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Molecularly engineered ZnO–carbon nanosheets from fumaric acid precursors for efficient photocatalytic water purification

The photocatalytic breakdown of organic contaminants is crucial for the development of water purification technology. Zinc oxide (ZnO) is an extensively researched photocatalyst; however, its efficacy is hindered by rapid charge recombination and limited utilization of UV irradiation. Resolving these issues necessitates integrating ZnO with conductive carbon phases via scalable, low-temperature synthesis. We provide a molecularly designed sol–gel method that converts zinc–fumarate coordination networks into two-dimensional ZnO–carbon nanosheets utilizing solely aqueous precursors and mild annealing temperatures (400–600 °C). This method utilizes fumaric acid as a dicarboxylate linker and polyvinylpyrrolidone (PVP) as a structural carbon source to produce ultrathin wurtzite ZnO nanosheets embedded inside an amorphous carbon matrix. The resultant ZnO-C hybrid achieves nearly complete methylene blue degradation within 10 min under UV-A illumination, demonstrating first-order kinetics and outstanding recyclability. Compared with commercial ZnO, the ZnO–C nanosheets exhibit comparable rapid photocatalytic degradation, enhanced adsorption behavior, a porous nanosheet morphology, and an integrated ZnO–carbon interfacial structure. These findings provide a viable molecular-templating approach to fabricating various metal oxide–carbon photocatalysts and underscore substantial enhancements in semiconductor efficacy in eco-friendly water treatment systems.

Ozcan, Muca [ORNL] (ORCID:0000000320020474)↗
DOE OSTI2022

Water purification

Production of decontaminated water from contaminated water using a vessel, an inlet to the vessel wherein the contaminated water is introduced into the vessel, an outlet to the vessel wherein the decontaminated water is removed from the vessel, a plasmonic-photocatalyst membrane connected to the vessel, plasmonic nanoparticles or nanostructures connected to the plasmonic-photocatalyst membrane, and a source of ultraviolet light that directs ultraviolet light onto the vessel, the plasmonic-photocatalyst membrane, the plasmonic nanoparticles or nanostructures, and the contaminated water to produce the decontaminated water from the contaminated water.

Brisbin, Ryan P.↗
DOE OSTI2015

Energy requirements of the switchable polarity solvent forward osmosis (SPS-FO) water purification process

A model was developed to estimate the process energy requirements of a switchable polarity solvent forward osmosis (SPS FO) system for water purification from aqueous NaCl feed solution concentrations ranging from 0.5 to 4.0 molal at an operational scale of 480 m3/day (feed stream). The model indicates recovering approximately 90% of the water from a feed solution with NaCl concentration similar to seawater using SPS FO would have total equivalent energy requirements between 2.4 and 4.3 kWh per m 3 of purified water product. The process is predicted to be competitive with current costs for disposal/treatment of produced water from oil and gas drilling operations. As a result, once scaled up the SPS FO process may be a thermally driven desalination process that can compete with the cost of seawater reverse osmosis.

15 GEOTHERMAL ENERGY↗
DOE OSTI2019

Performance efficiency and kinetic studies of water purification using ZnO and MgO nanoparticles for potassium permanganate

Zinc oxide (ZnO) and Magnesium oxide (MgO) nanoparticles (NPs) have been synthesized by solid–solid reaction technique. X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier-transform infrared (FTIR) were used to investigate the structural properties of ZnO and MgO NPs. XRD indicates that structural of ZnO NPs has a hexagonal structure with space group P63mc. On the other hand, MgO NPs is cubic structure with space group Fm 3-bar m. The photocatalytic efficiency of both ZnO and MgO NPs as a catalyst was illustrated by studying the extreme quantity of potassium permanganate (KMnO{sub 4}) degradation rate in wastewater. KMnO{sub 4} achieved 17% and 25% degradation rate in 180 min for ZnO and MgO NPs, respectively. The experimental data were examined by the kinetic models of pseudo-first and second order as well as intra-particle diffusion. The obtained data is expressed well by the second-order kinetic model for both NPs. Moreover, according to the experimental results, MgO NPs has high-performance water purification as a comparison of ZnO NPs effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Bipolar Membranes Electrodialysis for Water Purification and Resource Recovery

Reverse osmosis concentrate (ROC) from inland brackish water desalination and wastewater recycling presents moderate salinity, posing significant challenges for treatment and disposal. Existing treatment technologies predominantly rely on energy-intensive thermal methods, large-area evaporation strategies, or deep-well disposal, which often result in the loss of water value. Electrified membrane brine treatment offers a promising alternative by utilizing renewable energy sources, enabling complete water recycling. This work proposes the development of next-generation bipolar membrane electrodialysis (BMED) systems capable of desalinating brine while simultaneously recovering valuable resources. However, several critical challenges remain in the areas of membrane engineering for BMED. These include: 1) decreased current efficiency during desalination due to the low conductivity of feed chambers, 2) fouling and scaling from multivalent ions and contaminants in the feed, and 3) the retention and carryover of ROC contaminants, including PFAS compounds. Our research focuses on the development of novel anion exchange membranes (AEMs) and cation exchange membranes (CEMs) based on synthesized multiblock copolymers. We investigate the effects of block length, ion exchange capacity (IEC), and polymer backbone structure on cation and anion transport (e.g., Na+, Cl-, OH-, H+) for both our synthesized membranes and commercial membranes. Fundamental properties of these membranes, such as water uptake, IEC, and ionic conductivity, are also evaluated to optimize performance for BMED applications.

08 HYDROGEN↗
DOE OSTI2018

Argonne News Brief: Engineering Efficiency in Water Purification

Manufacturing experts at Argonne have developed a more efficient way of making resin wafers used to electrochemically purify water. This technology uses automated controls and a semi-continuous process to produce a new wafer every 5 minutes, at least 10 times faster than the production techniques used today. This efficient technology can make it easier for industry to cost-effectively adopt and implement processes for energy efficient water treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Combustion water purification techniques influence on OBT analysing using liquid scintillation counting method

In order to determine organically bound tritium (OBT) from environmental samples, these must be converted into water, measurable by liquid scintillation counting (LSC). For this purpose we conducted some experiments to determine OBT level of a grass sample collected from an uncontaminated area. The studied grass sample was combusted in a Parr bomb. However usual interfering phenomena were identified: color or chemical quench, chemiluminescence, overlap over tritium spectrum because of other radionuclides presence as impurities ({sup 14}C from organically compounds, {sup 36}Cl as chloride and free chlorine, {sup 40}K as potassium cations) and emulsion separation. So the purification of the combustion water before scintillation counting appeared to be essential. 5 purification methods were tested: distillation with chemical treatment (Na{sub 2}O{sub 2} and KMnO{sub 4}), lyophilization, chemical treatment (Na{sub 2}O{sub 2} and KMnO{sub 4}) followed by lyophilization, azeotropic distillation with toluene and treatment with a volcanic tuff followed by lyophilization. After the purification step each sample was measured and the OBT measured concentration, together with physico-chemical analysis of the water analyzed, revealed that the most efficient method applied for purification of the combustion water was the method using chemical treatment followed by lyophilization.

54 ENVIRONMENTAL SCIENCES↗