Analysis of filament-wound dome and polar boss of metal-lined glass-filament-wound pressure vessels
Structural analysis of glass filament wound, aluminum lined pressure vessel designs
Landes, R. E.↗
SEARCH · Engineering Papers
Results for “WOUNDS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Microwave Tissue Soldering for Immediate Wound Closure
A novel approach for the immediate sealing of traumatic wounds is under development. A portable microwave generator and handheld antenna are used to seal wounds, binding the edges of the wound together using a biodegradable protein sealant or solder. This method could be used for repairing wounds in emergency settings, by restoring the wound surface to its original strength within minutes. This technique could also be utilized for surgical purposes involving solid visceral organs (i.e., liver, spleen, and kidney) that currently do not respond well to ordinary surgical procedures. A miniaturized microwave generator and a handheld antenna are used to deliver microwave energy to the protein solder, which is applied to the wound. The antenna can be of several alternative designs optimized for placement either in contact with or proximity to the protein solder covering the wound. In either case, optimization of the design includes the matching of impedances to maximize the energy delivered to the protein solder and wound at a chosen frequency. For certain applications, an antenna could be designed that would emit power only when it is in direct contact with the wound. The optimum frequency or frequencies for a specific application would depend on the required depth of penetration of the microwave energy. In fact, a computational simulation for each specific application could be performed, which would then match the characteristics of the antenna with the protein solder and tissue to best effect wound closure. An additional area of interest with potential benefit that remains to be validated is whether microwave energy can effectively kill bacteria in and around the wound. Thus, this may be an efficient method for simultaneously sterilizing and closing wounds. Using microwave energy to seal wounds has a number of advantages over lasers, which are currently in experimental use in some hospitals. Laser tissue welding is unsuitable for emergency use because its large, bulky equipment cannot be easily moved between operating rooms, let alone relocated to field sites where emergencies often occur. In addition, this approach is highly dependent on the uniformity and thickness of the protein solder as well as the surgeon s skills. In contrast, the use of microwave energy is highly tolerant of the thickness of the protein solder, level of fluids in and around the wound, and other parameters that can adversely affect the outcome of laser welding. However, controlling the depth of penetration of the microwave energy into the wound is critical for achieving effective wound sealing without damaging the adjacent tissue. In addition, microspheres that encapsulate metallic cores could also be incorporated into the protein solder to further control the depth of penetration of the microwave energy.
Arndt, G. Dickey↗
Microwave Tissue Soldering for Immediate Wound Closure
A novel approach for the immediate sealing of traumatic wounds is under development. A portable microwave generator and handheld antenna are used to seal wounds, binding the edges of the wound together using a biodegradable protein sealant or solder. This method could be used for repairing wounds in emergency settings by restoring the wound surface to its original strength within minutes. This technique could also be utilized for surgical purposes involving solid visceral organs (i.e., liver, spleen, and kidney) that currently do not respond well to ordinary surgical procedures. A miniaturized microwave generator and a handheld antenna are used to deliver microwave energy to the protein solder, which is applied to the wound. The antenna can be of several alternative designs optimized for placement either in contact with or in proximity to the protein solder covering the wound. In either case, optimization of the design includes the matching of impedances to maximize the energy delivered to the protein solder and wound at a chosen frequency. For certain applications, an antenna could be designed that would emit power only when it is in direct contact with the wound. The optimum frequency or frequencies for a specific application would depend on the required depth of penetration of the microwave energy. In fact, a computational simulation for each specific application could be performed, which would then match the characteristics of the antenna with the protein solder and tissue to best effect wound closure. An additional area of interest with potential benefit that remains to be validated is whether microwave energy can effectively kill bacteria in and around the wound. Thus, this may be an efficient method for simultaneously sterilizing and closing wounds.
Arndt, G. Dickey↗
Molecular cloning and characterization of a tomato cDNA encoding a systemically wound-inducible bZIP DNA-binding protein
Localized wounding of one leaf in intact tomato (Lycopersicon esculentum Mill.) plants triggers rapid systemic transcriptional responses that might be involved in defense. To better understand the mechanism(s) of intercellular signal transmission in wounded tomatoes, and to identify the array of genes systemically up-regulated by wounding, a subtractive cDNA library for wounded tomato leaves was constructed. A novel cDNA clone (designated LebZIP1) encoding a DNA-binding protein was isolated and identified. This clone appears to be encoded by a single gene, and belongs to the family of basic leucine zipper domain (bZIP) transcription factors shown to be up-regulated by cold and dark treatments. Analysis of the mRNA levels suggests that the transcript for LebZIP1 is both organ-specific and up-regulated by wounding. In wounded wild-type tomatoes, the LebZIP1 mRNA levels in distant tissue were maximally up-regulated within only 5 min following localized wounding. Exogenous abscisic acid (ABA) prevented the rapid wound-induced increase in LebZIP1 mRNA levels, while the basal levels of LebZIP1 transcripts were higher in the ABA mutants notabilis (not), sitiens (sit), and flacca (flc), and wound-induced increases were greater in the ABA-deficient mutants. Together, these results suggest that ABA acts to curtail the wound-induced synthesis of LebZIP1 mRNA.
Non-NASA Center↗
Rapid systemic up-regulation of genes after heat-wounding and electrical stimulation
When one leaf of a tomato plant is electrically-stimulated or heat-wounded, proteinase inhibitor genes are rapidly up-regulated in distant leaves. The identity of the systemic wound signal(s) is not yet known, but major candidates include hormones transmitted via the phloem or the xylem, the electrically-stimulated self-propagating electrical signal in the phloem (the action potential, AP), or the heat-wound-induced surge in hydraulic pressure in the xylem evoking a local change in membrane potential in adjacent living cells (the variation potential, VP). In order to discriminate between these signals we have adopted two approaches. The first approach involves applying stimuli that evoke known signals and determining whether these signals have similar effects on the "model" transcripts for proteinase inhibitors (pin) and calmodulin (cal). Here we show that a heat wound almost invariably evokes a VP, while an electrical stimulation occasionally evokes an AP, and both of these signals induce accumulation of transcripts encoding proteinase inhibitors. The second approach involves identifying the array of genes turned on by heat-wounding. To this end, we have constructed a subtractive library for heat-wounded tissue, isolated over 800 putatively up-regulated clones, and shown that all but two of the fifty that we have analyzed by Northern hybridization are, indeed, up-regulated. Here we show the early kinetics of up-regulation of three of these transcripts in the terminal (4th) leaf in response to heat-wounding the 3rd leaf, about 5 cm away. Even though these transcripts show somewhat different time courses of induction, with one peaking at 30 min, another at 15 min, and another at 5 min after flaming of a distant leaf, they all exhibit a similar pattern, i.e., a transient period of transcript accumulation preceding a period of transcript decrease, followed by a second period of transcript accumulation.
NASA Discipline Plant Biology↗
A WOUND CARE AND INTRAVENOUS ACCESS SUMMIT FOR ON-ORBIT CARE
Wound care issues and the ability to establish intravenous (IV) access among injured or ill crew members are a source of concern for NASA flight surgeons. Indeed, the microgravity environment and the remote nature of the International Space Station (ISS) pose unique challenges in diagnosing and treating an injured astronaut. Therefore, it is necessary to identify and adapt the best evidence based terrestrial practices regarding wound care, hemostasis, and IV access for use on the ISS. Methods: A panel of consultants was convened to evaluate the adequacy of the current ISS in-flight medical system for diagnosis and treatment of wounds and establishing IV access by a nonclinician crew medical officer. Participants were acknowledged experts in terrestrial wound care and/or operational medicine. Prior to the meeting, each panelist was encouraged to participate in a pre-summit online forum. Results: Eight external experts participated in a face-to-face meeting held at NASA-Johnson Space Center. Recommendations were made to augment the space station pharmacopoeia, as well as current wound care diagnostic, therapeutic, and deorbit criteria protocols. Additionally, suggestions were offered regarding IV access techniques and devices for use in the microgravity environment. Discussion: The results of the expert panel provide an evidence-based approach to the diagnosis and care of wounds in an injured astronaut on aboard the ISS. The results of the panel underscored the need for further research in wound therapy and IV access devices.
Scheuring, R.↗
Comparison of hand laid-up tape and filament wound composite cylinders and panels with and without impact damage
The results of this experimental comparison of filament wound control (unimpacted) cylinders loaded to failure in axial compression indicates that one fiber cross-over location has no effect on the failure mode or strain in thick walled filament wound graphite-epoxy specimens with stacking sequence (plus or minus 45/90) sub 3s. A comparison between filament wound and hand laid-up tape control cylinders indicates that there is little or no difference in the response of cylinders constructed by using two different fabrication methods, however, unimpacted panels with many fiber cross-overs fail at up to 15 percent lower strains than panels with no fiber cross-overs. A comparison of samples subjected to low speed impact damage prior to compressive loading indicates that impact damage reduces the strain at failure by over 60 percent in tape and filament wound graphite-epoxy cylinders and in tape flat panels. The presence of fiber cross-overs was observed to reduce the strength of filament wound impact-damaged panels, but to have no significant effect on the strength of filament wound impact-damaged cylinders.
Jegley, Dawn C.↗
Compressive behavior of undulations in filament-wound composites
The compressive performance of a filament-wound cylinder can be severely degraded by unavoidable fiber curvatures due to the presence of crossover bands. These crossover bands contain fiber undulations which influence the compressive strength, stiffness, and associated failure mechanisms of a filament-wound structure. The primary objectives of this study were to identify failure mechanisms and measure the compressive strength and stiffness of test specimens which model the microundulations. Compressive tests were conducted on flat-panel coupons which were developed to model the mechanics of large-scale fiber undulation regions in filament-wound composite cylinders. The primary effect of the undulation regions within a filament-wound structure is to initiate failure. Depending on the overall laminate configuration, the failure process includes various combinations of failure mechanisms, such as delaminations, matrix splitting and/or fiber fracture. These failure mechanisms are aggravated by the presence of large deformations caused by the reduction in local compressive stiffness and the introduction of complex material couplings due to the fiber undulation. Furthermore, the adjacent layers have been shown to strongly influence the compressive strength, stiffness, and associated failure mechanisms by weakening or reinforcing the laminate.
Jensen, David W.↗
Impact damage in filament wound composite bottles
Increasingly, composite materials are being used in advanced structural applications because of the significant weight savings they offer when compared to more traditional engineering materials. The higher cost of composites must be offset by the increased performance that results from reduced structural weight if these new materials are to be used effectively. At present, there is considerable interest in fabricating solid rocket motor cases out of composite materials, and capitalizing on the reduced structural weight to increase rocket performance. However, one of the difficulties that arises when composite materials are used is that composites can develop significant amounts of internal damage during low velocity impacts. Such low velocity impacts may be encountered in routine handling of a structural component like a rocket motor case. The ability to assess the reduction in structural integrity of composite motor cases that experience accidental impacts is essential if composite rocket motor cases are to be certified for manned flight. While experimental studies of the post-impact performance of filament wound composite motor cases haven been proven performed (2,3), scaling impact data from small specimens to full scale structures has proven difficult. If such a scaling methodology is to be achieved, an increased understanding of the damage processes which influence residual strength is required. The study described herein was part of an ongoing investigation of damage development and reduction of tensile strength in filament wound composites subjected to low velocity impacts. The present study, which focused on documenting the damage that develops in filament wound composites as a result of such impacts, included two distinct tasks. The first task was to experimentally assess impact damage in small, filament wound pressure bottles using x-ray radiography. The second task was to study the feasibility of using digital image processing techniques to assist in determining the 3-D distribution of damage from stereo x-ray pairs.
Highsmith, Alton L.↗
Methods and apparatus for microwave tissue welding for wound closure
Methods and apparatus for joining biological tissue together are provided. In at least one specific embodiment, a method for joining biological tissue together can include applying a biological solder on a wound. A barrier layer can be disposed on the biological solder. An antenna can be located in proximate spatial relationship to the barrier layer. An impedance of the antenna can be matched to an impedance of the wound. Microwaves from a signal generator can be transmitted through the antenna to weld two or more biological tissue pieces of the wound together. A power of the microwaves can be adjusted by a control circuit disposed between the antenna and the signal generator. The heating profile within the tissue may be adjusted and controlled by the placement of metallic microspheres in or around the wound.
Arndt, G. Dickey↗
Filament Wound Composite Analysis Using the NASA Multiscale Analysis Tool (NASMAT) and Finite Element Analysis
Fiber reinforced composite materials, owing to their tailorable thermomechanical and functional properties, allow one to produce a structure that is stronger, stiffer, and lighter than its metal counterpart while performing the same function, yielding a more efficient structure. This not only allows for the improvement of current technologies like aircraft structures, but also enables new technologies like gaseous hydrogen storage for mobility applications, which are otherwise impractical when manufactured using traditional metals due to weight and space restrictions or material embrittlement. However, the use of composites imposes greater design and manufacturing challenges on an engineer, since they are heterogenous, having a distinct structure across multiple length scale, behave generally anisotropically at the structural level and require complex manufacturing and processing methods. Capturing this complex behavior requires detailed numerical simulations, including the modeling of microstructural features like undulations, voids, and fiber alignment. In this paper, multiple repeating unit cells (RUCs), representing filament wound composites, are developed (via a script provided in the Appendix) and analyzed. The refinement of these RUCs is varied, and the analyses are performed using both the Abaqus finite element software and the NASA Multiscale Analysis Tool (NASMAT). A study is undertaken to compare the predicted effective elastic properties of the wound RUC to a laminate representation of the wound RUC, which neglects the undulations. Additionally, two different sets of periodic boundary conditions (PBCs) have been examined. One approximates the real boundary conditions using a standard approach and the other represents the PBCs exactly through the use of an offset. Lastly, a comparison of the local elastic stress fields is made among the models and approaches. Since wound structures are often approximated as laminated structures, it is important to understand the degree to which this assumption is valid, namely by first comparing the elastic constants and local elastic fields. This will provide, on the one hand, information concerning the bulk mechanical behavior and, on the other hand, insights concerning local load distributions and likely damage initiation sites.
Composites↗
High modulus filament wound vessels for cryogenic containers in spacecraft.
Compared to metallic vessels, filament-wound vessels for containment of cryogens and high pressure gases offer high potential weight savings for NASA spacecraft applications. Since carbon fiber/epoxy resin composites exhibit high strength-to-density ratios, high-cycle fatigue life, and excellent strain compatibility with internal metallic liners, filament-wound carbon fiber/epoxy resin composites were evaluated for application to cryogenic internal pressure vessels. Compared to room temperature values, the cryogenic strengths of the composites were reduced by about 15% at -423 F (with the exception of one composite) while moduli increased as much as 25%. Filament-wound carbon fiber/epoxy resin vessel specimens, made by three fabricators, defined and solved problems in the processing of these friable high-modulus fibers into structurally efficient vessel specimens.
Simon, R. A.↗
A thermal analysis of a spirally wound battery using a simple mathematical model
A two-dimensional thermal model for spirally wound batteries has been developed. The governing equation of the model is the energy balance. Convective and insulated boundary conditions are used, and the equations are solved using a finite element code called TOPAZ2D. The finite element mesh is generated using a preprocessor to TOPAZ2D called MAZE. The model is used to estimate temperature profiles within a spirally wound D-size cell. The model is applied to the lithium/thionyl chloride cell because of the thermal management problems that this cell exhibits. Simplified one-dimensional models are presented that can be used to predict best and worst temperature profiles. The two-dimensional model is used to predict the regions of maximum temperature within the spirally wound cell. Normal discharge as well as thermal runaway conditions are investigated.
Evans, T. I.↗
Comparison of hand laid-up tape and filament wound composite cylinders and panels with and without impact damage
Experimentally determined axial compressive failure loads, strains and failure modes of composite flat panels and cylinders are presented. A comparison of two types of filament wound flat graphite-epoxy panels indicates that the winding pattern can influence structural response. A comparison of hand laid-up tape and filament wound composite cylinders indicates that fabrication method may not significantly influence the failure mode or average failure strain of thick-walled (radius-to-thickness ratio less than 15) graphite-epoxy cylinders. The interaction of manufacturing-induced features (fiber cross-overs) and low-speed impact damage for graphite-epoxy specimens is also presented. Filament would flat panels with many fiber cross-overs exhibited lower failure strains than filament wound panels without fiber cross-overs for all impact speeds examined. Graphite-thermoplastic cylinders exhibited a significantly different failure mode from the graphite-epoxy cylinders.
Jegley, Dawn C.↗
Mechanical load induces sarcoplasmic wounding and FGF release in differentiated human skeletal muscle cultures
The transduction mechanism (or mechanisms) responsible for converting a mechanical load into a skeletal muscle growth response are unclear. In this study we have used a mechanically active tissue culture model of differentiated human skeletal muscle cells to investigate the relationship between mechanical load, sarcolemma wounding, fibroblast growth factor release, and skeletal muscle cell growth. Using the Flexcell Strain Unit we demonstrate that as mechanical load increases, so too does the amount of sarcolemma wounding. A similar relationship was also observed between the level of mechanical load inflicted on the cells and the amount of bFGF (FGF2) released into the surrounding medium. In addition, we demonstrate that the muscle cell growth response induced by chronic mechanical loading in culture can be inhibited by the presence of an antibody capable of neutralizing the biological activity of FGF. This study provides direct evidence that mechanically induced, sarcolemma wound-mediated FGF release is an important autocrine mechanism for transducing the stimulus of mechanical load into a skeletal muscle growth response.
NASA Center JSC↗
Using Light to Treat Mucositis and Help Wounds Heal
A continuing program of research and development is focusing on the use of controlled illumination by light-emitting diodes (LEDs) to treat mucositis and to accelerate healing of wounds. The basic idea is to illuminate the affected area of a patient with light of an intensity, duration, and wavelength (or combination of wavelengths) chosen to produce a therapeutic effect while generating only a minimal amount of heat. This method of treatment was originally intended for treating the mucositis that is a common complication of chemotherapy and radiation therapy for cancer. It is now also under consideration as a means to accelerate the healing of wounds and possibly also to treat exposure to chemical and radioactive warfare agents. Radiation therapy and many chemotherapeutic drugs often damage the mucosal linings of the mouth and gastrointestinal tract, leading to mouth ulcers (oral mucositis), nausea, and diarrhea. Hyperbaric-oxygen therapy is currently the standard of care for ischemic, hypoxic, infected, and otherwise slowlyhealing problem wounds, including those of oral mucositis. Hyperbaric-oxygen therapy increases such cellular activities as collagen production and angiogenesis, leading to an increased rate of healing. Biostimulation by use of laser light has also been found to be effective in treating mucositis. For hyperbaricoxygen treatment, a patient must remain inside a hyperbaric chamber for an extended time. Laser treatment is limited by laser-wavelength capabilities and by narrowness of laser beams, and usually entails the generation of significant amounts of heat.
Ignatius, Robert W.↗
Filament-wound, fiberglass cryogenic tank supports
The design, fabrication, and testing of filament-wound, fiberglass cryogenic tank supports for a LH2 tank, a LF2/FLOX tank and a CH4 tank. These supports consist of filament-wound fiberglass tubes with titanium end fittings. These units were satisfactorily tested at cryogenic temperatures, thereby offering a design that can be reliably and economically produced in large or small quantities. The basic design concept is applicable to any situation where strong, lightweight axial load members are desired.
Carter, J. S.↗
High performance filament wound composites for pressure vessel applications.
A new high modulus fiber was evaluated as a reinforcement for filament wound pressure vessels. Based on preliminary data it offers significant specific strength and modulus improvements over an S-glass reinforcement. Winding parameters and design data were established for the fiber with two different epoxy resin systems. NOL composite rings were evaluated for tensile strength, modulus and interlaminar shear strength at +70 F, -320 F and -423 F. Results showed that the fiber reinforced composite exhibited a specific strength of 4,100,000 inches and a specific modulus of 290,000,000 inches compared to 3,260,000 inches and 110,000,000 inches respectively for S-glass. Utilizing this data to design small filament wound pressure vessels, a performance factor of 806,000 inches was obtained experimentally with PRD 49-1 fiber compared to values of 632,000 inches and 501,000 inches for S-glass and high modulus graphite vessels, respectively.
Hoggatt, J. T.↗