Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Strategies for Optimizing WIP Investment in State Energy Offices

This report outlines strategies for Weatherization and Intergovernmental Programs Office (WIP) investment aimed at improving state energy office programs. The project was funded by WIP within the U.S. Department of Energy (DOE) office of Energy Efficiency and Renewable Energy (EERE). WIP aims "to enable strategic investments in energy efficiency and renewable energy technologies through the use of innovative practices across the United States in partnership with a wide range of stakeholders, including state and local organizations and community-based nonprofits." Across its programs, WIP has created thousands of jobs, maintains an investment ratio of 4.1 to 1, and increases U.S. economic output by 1.2 billion a year. This project was funded in the FY21 budget cycle and originally focused on improving WIP energy efficiency funding and programs. The project gathered information from various state energy offices to understand how WIP funding and processes can be optimized to improve state-level energy efficiency programs. We propose that the conclusions are also broadly applicable to weatherization and renewable energy deployment programs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Characterization of wood fiber insulation for the development of wood fiber-insulated panels (WIPs) for use in building envelope

Wood fiber insulation (WFI) was studied as an eco-friendly alternative for fossil-based building insulation, focusing on its use in new wood fiber-insulated panels (WIPs). Rigid WFI boards with densities of 110, 140, and 180 kg/m³, including a 140 kg/m³ variant without paraffin wax, were evaluated. Key properties investigated included porosity, water vapor transmission, liquid water adsorption, and thermal conductivity. The porosity ranged between 85 and 92%, primarily influenced by density. Water vapor permeability ranged from 65 to 90 ng·s-1m-1Pa-1, while liquid water absorption was between 2.5 and 20% by volume, influenced by both wax and density. The thermal conductivity coefficient ranged from 0.038 to 0.055 W/(m·K). Bond strength tests with WFI (140 kg/m³ with wax) laminated to various materials using structural adhesives showed tensile perpendicular-to-grain strengths of 10 to 16 kPa and shear strengths of 60 to 90 kPa, with failure only occurring within the WFI. It was concluded that WFI is a promising material for novel WIPs, offering competitive hygrothermal properties and compatibility with structural adhesives. However, its bio-based nature suggests variability and complexity, necessitating further rigorous testing in various climates and in more complex assemblies.

Materials Science↗
DOE OSTI2023

WiP Abstract: Edge-Based Privacy of Naturalistic Driving Data Collection

Collecting large driving datasets is important for data-driven transportation research and studied in naturalistic driving [3]. Due to the standard implementation of a Controller Area Network (CAN) bus for a vehicle’s inter-module communication, many off-the-shelf devices can easily transform a vehicle into a rich data collection utility [2]. Vehicles with Adaptive Cruise Control (ACC) are an example of a feature resulting in emergent traffic behavior when scaled [4]. While these utilities were designed with particular data use cases, data may be publicly shared to benefit other researchers through online tools like CyVerse [1]. However, such data should only be shared when any private information is removed. This private information may exist as a set of GPS coordinates, since the start and end points of a trip may designate a driver’s place of residence or work. When considering larger continuously-collected data sets with a focus on naturalistic driving, many drivers are needed to make data collection feasible. Removal of private information becomes much more of a challenge since every driver may uniquely define their geographic privacy. This project aims to build upon the foundation of libpanda [2] by adding features of edge-based data privacy enforcement. In it’s current form, libpanda uses a GPS in conjunction with a CAN interface to record data. Libpanda feature s a set of startup and shutdown scripts to perform automatic data collection and upload. With additional support hardware on a Raspberry Pi, the Pi can maintain power on vehicle shutdown to automatically upload data before shutdown.

Bunting, Matt↗
DOE OSTI2024

WIP: Collaborating to Introduce Second-Life Battery Technology Research in an Informal STEM Learning Environment

This work in progress, innovative practice, paper outlines an interdisciplinary collaborative model utilized by a team of educational researchers, and engineers to design a series of community-centered, place-based learning activities suitable for a middle or high school informal STEM learning environment. Based on the potential applications and benefits of Second-Life Electric Vehicle Batteries, the activities connect cutting-edge STEM research with multidimensional real-world challenges within their communities related to climate change, renewable energy integration and storage, intelligent transportation systems, and optimized energy management, that empowers students to think critically about the role they can play in shaping a more resilient, environmentally sustainable community.

Whiteside, Hope↗
DOE OSTI2021

National and Regional Initiatives to Promote Energy Efficiency and Renewable Energy Through State Energy Offices

The National Association of State Energy Officials (NASEO) worked with the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy (EERE), Weatherization and Intergovernmental Programs Office (WIP) over a ten year period to provide technical assistance, research and analyses, and enhanced coordination between DOE and the State and Territory Energy Offices. Over the life of the agreement, NASEO worked with WIP and the states to provide statewide strategic energy plan analyses and recommendations, including customized technical assistance to the states; peer to peer financing assistance via NASEO’s Financing Committee and supporting activities; training on core energy policies and programs, including dialogues and resources to support energy-air coordination, a training for new State Energy Office Directors, peer to peer exchange via a rural energy taskforce, and support to states to enhance buildings efficiency, home energy labeling, and technology deployment opportunities; support for State Energy Program metrics; and regional coordination via regional coordinators and peer exchange opportunities both in-person and online. Over the life of the project, the position and role of State Energy Offices within state government has changed, with now 80 percent of State Energy Office Directors serving as their Governor’s energy advisor, or reporting directly to their Governor’s energy advisor. This shift in stature has made it ever more crucial for State Energy Offices to receive timely and relevant technical assistance across a range of energy issue areas. NASEO, in collaboration with WIP, was able to deliver this technical assistance, and energy efficiency and renewable energy deployment has accelerated across the country. The State Energy Office Directors and their staff continue to engage in NASEO’s Committees – many of which were supported through this agreement – and have provided formal and informal feedback on the value of the programs supported through this award (e.g., reporting via survey increased understanding of their roles and technical assistance offerings provided by WIP and NASEO following the New Director Trainings). Moreover, resources developed through this award (e.g., Comprehensive State Energy Planning Guidelines, State Energy Loan Fund Database, Rural Data Resources for State Energy Planning and Programs, The Value of Adding home Energy Score to Low-Income Energy Efficiency Programs, etc.) have been cited by states as instrumental to their understanding of specific energy issue areas and in many cases led directly to enhanced program design within a state (e.g. Iowa citing their review of NASEO’s Comprehensive State Energy Planning Guidelines as a necessary first step in their planning process, later following may of the steps outlined in the guidelines). The priorities of the states and federal government have evolved over the last decade, with an increasing focus on climate mitigation and adaptation, equity impacts and considerations, energy security and resilience, and enhanced energy efficiency and renewable energy technology deployment, but the roots of these new priorities are based in the state and federal policies and programs, and research and analyses, that were supported in part through this award and other complementary initiatives. NASEO looks forward to continuing to support the states, and collaborate and coordinate with DOE, as we build on this important foundation in the years ahead.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Effect of Anoxic Iron Corrosion on WIPP Brine Geochemistry FY23 Final Report (U)

A 280-day study was completed to evaluate the effect of zero-valent iron (Fe 0 ) on the Waste Isolation Pilot Plant (WIPP) brine geochemistry under anticipated reducing conditions. Hydrogen (H 2 ) gas is expected to be present in the repository after closure due to the anoxic corrosion of a vast quantity of iron contained in the waste forms disposed at WIPP; therefore, a background argon atmosphere containing H 2 was chosen for this study. WIPP groundwater brine pH and E h will impact the mobility and fate of plutonium within the repository. Modeling and laboratory results for Castile WIPP brine indicate that equilibrium fa values relative to the standard hydrogen electrode (SHE) are 40 mV more reducing (i.e., more negative) than those for Salado WIPP brine (-480 mV vs. -440 mV, respectively) because of the higher pH of the Castile brine (pH 9 .3 for Castile vs. pH 8.8 for Salado). The E h and pH data were corrected for the effects of high ionic strength. The experimental results for both brines are consistent with thermodynamic predictions using OLI Systems' Mixed Solvent Electrolyte chemical equilibrium model. The measured and corrected pH and E h data from this study are provided in Table ES-I and Table ES-2, respectively. The experimental study, with four test conditions in triplicate, was performed in a dual glovebox with a nominally 3 vol.% H 2 in argon atmosphere (target H 2 range: 3 ± I vol.%). Simulants containing MgO only ( experimental control) and MgO+Fe 0 (WIPP base case) were prepared for both the Salado and Castile brines. MgO was included in all simulants to account for the use of bulk magnesium oxide in the WIPP repository. Fe 0 was included in some simulants to incorporate the effects of the anoxic corrosion of iron and in-situ hydrogen generation in the study. The brine compositions were developed by Sandia National Laboratory (SNL; Xiong, 2008) and have been used in previous WIPP evaluations. The test method (agitation, etc.) is partially based on ASTM D3987-12. Twelve rounds of periodic measurements of pH and E h were performed over the course of the study. Chemical analysis results for liquids and solids (ICP-MS, ICP-ES, IC Anion, TIC, SEM-EDX) are consistent with the pH, E h , and thermodynamic modeling results. This study included the following conditions that deviate from anticipated post-closure conditions following brine intrusion, but were selected to facilitate bench-scale testing to validate modeling of pH and E h for the post-closure WIP P repository: an anoxic glove box atmosphere containing ≤ 4 vol. % H 2 vs. substantially higher H 2 gas concentrations assumed in the WIPP Performance Assessment (PA); a significantly higher liquid-to-solid test ratio compared to the much lower phase ratio anticipated in the WIP P repository; agitation of the simulant bottles to maximize mass transfer; and finally the use of Fe 0 reagents having a much greater surface area than expected in the WIP P repository. Non-representative conditions were chosen for various reasons such as: to provide bounding conservative results, to provide a margin of safety for testing, or to facilitate simulant sub-sampling and analysis. In a parallel effort, aqueous electrolyte thermodynamic models were developed for the synthetic Salado and Castile brines to inform the experimental design, facilitate laboratory data interpretation, and allow extension of evaluations beyond the parameters tested. Thermodynamic modeling simulations including the MgO and Fe 0 additives that are directly relevant to the experimental measurements (e.g., pH calibration curve, ORP corrections) are included in this report. The measured fa of the simulants was close to the OLI model predictions for both brines and was largely controlled by the background H 2 partial pressure in the vapor phase as well as H 2 generated in situ in the aqueous phase by the Fe 0 corrosion. The H 2 gas-phase concentration tested and thermodynamically evaluated was much lower than is assumed in the WIPP PA; however, H 2 (g) concentrations significantly below this level are still predicted to result in very reducing conditions. In conclusion: • The experimental results are consistent with thermodynamic model predictions for fa, pH, and the effects of high ionic strength. • Evidence to date suggests that the H2 concentration in the glovebox atmosphere ultimately determined the final E h values of the simulants and resulted in highly reducing conditions. As a result, little difference was observed between the control simulants containing only MgO and the WIPP base-case simulants that contained MgO and Fe 0 . • This test methodology is recommended for future studies evaluating WIPP repository conditions. The methodology includes: (1) background H 2 in argon with agitation ( or could alternatively include in-situ-generated H 2 in sealed bottles); (2) carefully measured and corrected ORP data ( with much effort focused on allowing the probes to fully stabilize); and (3) ionic-strength-corrected pH data. Other best practices, such as simulant sparging/handling, ORP probe replacement, etc., should also be considered. • The coupling of experimental studies and thermodynamic modeling is also highly recommended because these methods inform and direct one another leading to greater confidence in and understanding of the results.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Pore Structure and Wettability of Bossier Shale, East Texas, United States: Insights from Integrated Porosimetry, Scattering, and Imbibition Approaches

In this study, ascertaining the pore geometry and wettability characteristics of tight shales is of great significance for revealing the mechanisms of occurrence, migration, and production of shale resources. Taking the Bossier Shale collected from Well A, East Texas, USA, as an example, the pore geometry and wettability behavior in a broad nm-& μm scale pore spectrum were quantified based on integrated techniques, including water immersion porosimetry (WIP), mercury intrusion porosimetry(MIP), (ultra)small-angle X-ray scattering [(U)SAXS], contact angle, and liquid spontaneous imbibition (SI). Mainly owing to differences in the sample sizes used, data interpretation, as well as the detectable pore type (e.g., connected or not) and pore diameter ranges among different methods, sample porosities derived from WIP, MIP, and (U)SAXS were quite different, which range from 7.70 to 13.34%, 5.12 to 9.52%, and 2.48 to 6.44%, respectively. Therefore, a comparison of the porosities derived from different methods must be handled with utmost care. Additionally, although (U)SAXS is an effective technique for detecting both connected and non-connected pores, the fraction of non-connected pores could be underestimated by directly comparing the pore size distribution derived from (U)SAXS and MIP tests. This is because the sample sizes used for and pore information reflected by these two methods are different. Furthermore, the studied Bossier Shales exhibited various contact angle values and imbibition behaviors when using differently polarized liquids, revealing their mixed-wet characteristics. Comprehensively considering the differences in contact angle, imbibition slope, and imbibed liquid volume, three sub-categories of wettability behavior, with respect to more oil-wet, more water-wet, and intermediate mixed-wet, were qualitatively identified.

(U)SAXS↗
DOE OSTI2024

Alpha-Quartz Plastic Strength Investigation Via Diffraction Experiments on Novaculite Using A D-Dia and Elastic Plastic Self- Consistent Interpretation [Thesis}

X-Ray Tomography. Porosity is commonly measured using mercury injection (MI) or water immersion porosimeter (WIP). Both MI and WIP utilize pressure to fill open voids with mercury or water respectively. A measure of the volume change of the sample is then used to estimate the percentage of open voids. However, for the purpose of rheological study it is important to get an accurate measure of open and closed voids. X-ray tomography has been selected as it offers a three-dimensional view into the sample that can quantify all pores limited only by the voxel size which is in the micron range for this study. Radiographs for tomography were collected at the Material Science and Technology Division at Los Alamos National Lab using the Carl Zeiss Xradio 520 instrument and Scout-and-Scan version 16.1 operating software. Two samples were imaged, the starting material and the deformed sample SiO2_65. 3001 radiographs were taken of the starting material with a 6 second exposure time using a 4x objective lens. The x-ray beam was set to 60 kilovoltage peak (kVp) and 5 watts. 1901 radiographs were taken of SiO2_65 with a 25 second exposure time using a 10x objective lens. The x-ray beam was set to 80 kVp and 7 watts. Radiograph files were analyzed by Brian Patterson using Avizo. Void and inclusion volumes were output by voxel sized (1.03 μm) slices, used to calculate a total percentage volume for the starting material.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Supporting a Clean Energy Economy 2013-2018

The National Governor’s Association Center for Best Practices energy staff is focused on developing and implementing innovative solutions to state energy policy challenges. Among NGA’s energy teams focus are topics such as energy affordability, resilience, and reliability, which align with priorities of DOE’s WIP office. Given NGA’s direct connections with governors’ offices and longstanding support to governors’ policy staff on energy efficiency, renewable energy, resilience, reliability, affordability, and related topics, we are well suited to work alongside the U.S. Department of Energy (DOE) to support governors’ offices and key energy staff, address longstanding challenges, and deliver best practice solutions.

14 SOLAR ENERGY↗
DOE OSTI2022

The SDRD Proposal Process

Presentation to be given at the December 2022 WIP Seminar. This is a guide to the SDRD proposal process, particularly how to write a successful SDRD proposal for the FY24 proposal cycle.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

LMI Solar Context for WAP

Low-to-moderate income (LMI) households represent 43% of the U.S. population and spend disproportionately more of their income on energy. Solar has been disproportionately adopted by high-income households. Increasing interest in policy interventions to include LMI households and create more equitable solar access.

ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Key Takeaways from Weatherization Assistance Program (WAP) Wage Study & Analysis

In early 2021, the National Association for State Community Services Programs (NASCSP) and its Workforce Development Working Group provided turnkey survey tools to the Weatherization Assistance Program (WAP) network on compensation rates for six core WAP positions. From February to April 2021 wage surveys were voluntarily conducted by 27 states, with 286 Subgrantees self-reporting hourly wage data. For context, a $1/hour increase in wages = $2,080/year increase in salary.

ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Work In Progress: Digital Holography

SDRD will host a Webex Presentation of Dan Sorenson's Work in Progress for Digital Holography on Tuesday, May 17th. Originally we had a different presenter but he is leaving the company

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗