Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WATER TABLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Pressure Transducer Measurement Variability in Deep Wells Screened Across the Water Table

Abstract Automated water level measurements collected using vented pressure transducers in deep wells screened across the water table may exhibit a greater response to barometric pressure changes than the true water level. The cause was hypothesized to be disequilibrium in barometric pressure between the wellbores and land surface due to air exchange with the deep vadose zone. In this study, vented and nonvented pressure transducers were installed and operated simultaneously in two deep wells screened across the water table. A vent tube open to the atmosphere at land surface allowed for barometric compensation of the vented transducers. Two nonvented transducers were installed in each well, one submerged in the water and one above the water surface. The difference in readings allowed for barometric compensation. Manual measurements were also collected. It was confirmed that measurements from the vented transducers exhibited greater variability in response to barometric pressure changes than the nonvented transducers and manual measurements. Comparison of the downhole barometric pressure measurements to values from a nearby meteorology station showed the response in the wells to changes in barometric pressure was time‐lagged and attenuated. Thus, the reference pressure from land surface supplied to the vented transducers was not representative of the air pressure within the wells. This caused fluctuations of the transducer readings in response to barometric pressure changes to be greater than the true water level change. This issue can be resolved by the use of nonvented pressure transducers.

McDonald, John P.↗
DOE OSTI2020

Relating the depth of the water table to the depth of weathering

Weathering of bedrock creates and occludes permeability, affecting subsurface water flow. Often, weathering intensifies above the water table. On the other hand, weathering can also commence below the water table. To explore relationships between weathering and the water table, a simplified weathering model for an eroding hillslope was formulated that takes into account both saturated and unsaturated subsurface water flow (but does not fully account for changes in dissolved gas chemistry). The phreatic line was calculated using solutions to mathematical treatments for both zones. In the model, the infiltration rate at the hill surface sets both the original and the eventual steady-state position of the water table with respect to the weathering reaction front. Depending upon parameters, the weathering front can locate either above or below the water table at steady state. Erosion also affects the water table position by changing porosity and permeability even when other hydrological conditions (e.g. hydraulic conductivity of parent material, infiltration rate at the surface) do not change. The total porosity in a hill (water storage capacity) was found to increase with infiltration rate (all else held constant). Furthermore, this effect was diminished by increasing the erosion rate. We also show examples of how the infiltration rate affects the position of the water table and how infiltration rate affects weathering advance.

58 GEOSCIENCES↗
DOE OSTI2022

Estimation of the Water Table Position in Unconfined Aquifers with MODFLOW 6

Abstract The numerical estimation of the position of the water table in unconfined aquifers is important for many practical applications. Its determination through observations or analytical methods is restricted to a few cases. Therefore, it is often estimated through numerical simulations, which may be affected by numerical artifacts and/or poor stability. We use MODFLOW to estimate the position of the water table for a seemingly simple example problem and demonstrate difficulties that can be faced when performing this kind of numerical simulation. We explain the causes for the numerical challenges that originate from the properties of the mathematical equations that must be solved. Based on the results of more than 600 steady‐state simulations, we show how the stability of the numerical solution can be affected by the values of physical parameters that define the problem (e.g., recharge rate, anisotropy ratio, and other parameters that control the numerical algorithm such as settings of the linear and nonlinear solution methods). Finally, we comment on some best practices to apply numerical simulations to estimate the water table position.

Geology↗
DOE OSTI2020

Bayesian Approach to Estimation of Water Table Elevations Using Historical Rasters as Prior Information 2019 - 20430

In cases of complex but only partially known geology and a lack of spatial control in observation well locations, water table elevation estimation is very challenging. In some cases, auxiliary information, such as observations of the movement of tracers, operation of injection and extraction wells, and calibration of groundwater models against the historical elevation data, can be combined with expert judgement to estimate flow directions in areas of sparse data and to aid in the production of more reliable contour maps (and associated rasters) than could be produced by relying on sparse well elevation data alone. Given a historical sequence of these raster maps, the question arises how to automate, to the extent possible, the process of producing new raster maps to reflect data from previous times, the current data and the operation of expert judgement. One solution is to adopt a Bayesian point of view and to regard the historical well elevation data, auxiliary information and historical raster maps as prior information. The well elevations for water table wells, as well as those for injection/extraction wells and the data associated with other relevant variables, can be viewed as predictors for the raster surface. From this prior information, we can, conditional on the values of these predictors for a new time period, compute an expected value map and a standard deviation map for the new raster. These then can be taken to specify a prior predictive distribution for the pixels in the new raster map. Then we condition the pixels, corresponding to water level observation wells within the raster, on the observed values in those wells (which in general will differ from the regression estimate) for the new time period. Given the smoothness of the water table surface, we then smooth the surface of deviations from the mean surface, based on the variograms of the historical rasters, and add this smoothed surface to the regression mean surface. The error structure of the produced raster map is defined by the regression error structure and the error due to smoothing based on the estimated variograms. This methodology has been developed and is being further refined for groundwater monitoring and remediation at LANL. It is a very flexible method that can also be applied with a variety of other predictors applied to model the water level wells in the area of interest over the historical record. The smoothness of the spatial process and its possible evolution over time can then be estimated from the residuals from this regression. This can be augmented by expert hydrogeological opinion based on site topography and hydrogeology. (authors)

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Estimating and Forecasting Time-Varying Groundwater Recharge in Fractured Rock: A State-Space Formulation with Preferential and Diffuse Flow to the Water Table

Rapid infiltration following precipitation may result in groundwater contamination from surface contaminants or pathogens. In fractured rock, contaminants can migrate rapidly to points of groundwater withdrawals. In contrast to the temporal availability of groundwater quality chemical indicators, meteorological and groundwater level observations are available in real-time to estimate time-varying recharge, which can act as a surrogate to identify periods of rapid infiltration that may indicate contamination susceptibility. Estimating recharge using methods, such as base-flow recession, unsaturated infiltration models, or Water-Table Fluctuations (WTF), cannot capitalize on currently available technologies and telecommunication infrastructure to conduct real-time recharge estimation at scales relevant to characterizing rapid infiltration. We present a linear, physics-based State-Space (SS) model of one-dimensional infiltration to estimate recharge, which includes preferential and diffuse-flow to the water table. The model can take advantage of real-time data for water-table altitude, precipitation, and evapotranspiration. Model parameters are calibrated over an observation period, and the Kalman Filter (KF) is subsequently applied to continuously update the observed (water-table altitude) and unobserved (groundwater recharge) system states and predict future states as new data become available. The SS/KF algorithm is demonstrated at the Masser Groundwater Recharge Site in Pennsylvania, USA and comparisons are made with recharge estimates from WTF methods. Model results indicate that the frequency of observations (daily versus sub-daily) dictates the allocation between preferential and diffuse flow. Additionally, because infiltration processes encompass many nonlinearities, model parameters estimated from observation periods need to be updated at least seasonally to account for changing recharge conditions.

groundwater, Recharge, infiltration, recursive est↗
DOE OSTI2022

Large-scale paleo water-table rise in a deep desert aquifer recorded by dissolved noble gases

Illuminating past hydrological and climatological conditions in arid regions may provide insights into future trends in groundwater availability. The main objective of this study is to explore paleorecharge processes in the deep regional Nubian Sandstone Aquifer (NSA), which stretches below the hyperarid deserts of the Sinai Peninsula (Egypt) and the Negev (Israel), using dissolved noble gas data. Extremely high amounts of dissolved excess air (Ne concentrations up to 4 × solubility equilibrium) were observed in the ancient ( 81 Kr-depleted) groundwater that was recharged during past pluvial epochs in the basin. Here, the observed unique excess air signal and the clear spatiotemporal structure of the noble gas compositions in the aquifer are hypothesized to reflect two major characteristics of the groundwater system: (a) large-scale, long-term rises in the water table that facilitate the entrapment and dissolution of air bubbles under increased hydrostatic pressure, and (b) the geological settings in the southern recharge area in Sinai, including an almost horizontal position of the layers and intercalation of low-permeability rock formations within the aquifer, which inefficiently reject air bubbles from groundwater, thereby allowing for substantial entrapment of bubbles that dissolve as the water table rises. Enhanced dissolution of entrapped air was also observed in other paleo-groundwater-containing regional sandstone aquifers across North Africa, which, together with the recent findings from the NSA, suggest that largescale water table fluctuations have likely extensively occurred during past pluvial periods over these (and possibly other) arid regions. A preliminary assessment of noble gas recharge temperatures (NGTs) indicates an apparent decoupling of surface and water table temperatures in the case of deep aquifers with a thick (hundreds of m) unsaturated zone. This observed decoupling calls for a re-evaluation of previously obtained NGT records and a need for future work to consider the modification of NGTs due to soil air fractionation and geothermal heating of the underlying deep unsaturated zones.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Relating land surface, water table, and weathering fronts with a conceptual valve model for headwater catchments

Knowing little about how porosity and permeability are distributed at depth, we commonly develop models of groundwater by treating the subsurface as a homogeneous black box even though porosity and permeability vary with depth. One reason for this depth variation is that infiltrating meteoric water reacts with minerals to affect porosity in localized zones called reaction fronts. We are beginning to learn to map and model these fronts beneath headwater catchments and show how they are distributed. The subsurface landscapes defined by these fronts lie subparallel to the earth-air interface but with lower relief. They can be situated above, below, or at the water table. These subsurface landscapes of reaction are important because porosity developed from weathering can control subsurface water storage. In addition, porosity often changes at the weathering fronts, and when this affects permeability significantly, the front can act like a valve that re-orients water flowing through the subsurface. We explore controls on the positions of reaction fronts under headwater landscapes by accounting for the timescales of erosion, chemical equilibration, and solute transport. One strong control on the landscape of subsurface reaction is the land surface geometry, which is in turn a function of the erosion rate. In addition, the reaction fronts, like the water table, are strongly affected by the lithology and water infiltration rate. We hypothesize that relationships among the land surface, reaction fronts, and the water table are controlled by feedbacks that can push landscapes toward an “ideal hill”. In this steady state, reaction-front valves partition water volumes into shallow and deep flowpaths. Furthermore, these flows dissolve low- and high-solubility minerals, respectively, allowing their reaction fronts to advance at the erosion rate. This conceptualization could inform better models of subsurface porosity and permeability, replacing the black box.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The Water Table Model (WTM) (v2.0.1): coupled groundwater and dynamic lake modelling

Abstract. Ice-free land comprises 26 % of the Earth's surface and holds liquid water that delineates ecosystems, affects global geochemical cycling, and modulates sea levels. However, we currently lack the capacity to simulate and predict these terrestrial water changes across the full range of relevant spatial (watershed to global) and temporal (monthly to millennial) scales. To address this knowledge gap, we present the Water Table Model (WTM), which integrates coupled components to compute dynamic lake and groundwater levels. The groundwater component solves the 2D horizontal groundwater flow equation using non-linear equation solvers from the C++ PETSc (Portable, Extensible Toolkit for Scientific Computation) library. The dynamic lake component makes use of the Fill–Spill–Merge (FSM) algorithm to move surface water into lakes, where it may evaporate or affect groundwater flow. In a proof-of-concept application, we demonstrate the continental-scale capabilities of the WTM by simulating the steady-state climate-driven water table for the present day and the Last Glacial Maximum (LGM; 21 000 calendar years before present) across the North American continent. During the LGM, North America stored an additional 14.98 cm of sea-level equivalent (SLE) in lakes and groundwater compared to the climate-driven present-day scenario. We compare the present-day result to other simulations and real-world data. Open-source code for the WTM is available on GitHub and Zenodo.

Callaghan, Kerry L. (ORCID:0000000226740838)↗
DOE OSTI2024

Monitoring of ground water table depth and soil moisture at the Point Reyes field site

Ground water table (GWT) depth and soil moisture (SM) have been monitored at several locations at the Point Reyes field site (Californian coastal grassland) from 2021 to 2024. Monitoring is still on-going and data may be added to this archive at later time. The SM data have been acquired using Teros 12 Meter soil moisture sensors placed at 10, 30, 60 and 90 cm depth at 5 locations along a small hillslope. These sensors also collect soil temperature and bulk conductance. In addition, some collocated sensors provide pore pressure and Photochemical Reflectance Index (PRI). The GWT depth has been inferred from various type of Onset pressure transducers. The pressure measurements have been corrected for atmospheric pressure variations and sensor position relative to the ground surface to infer GWT depth, as well as with RTK GPS data to infer GWT elevation. The GWT data have been acquired at 5 distinct locations from 2020 to 2024 with the sensors placed at about 4 m depth. In addition, GWT data has been acquired for the 2023-2024 period with sensors located in 1 m deep shallow wells installed near each deeper well. This data is intended to evaluate possibly different dynamic in shallow (perched) and deep aquifer. The datasets are all provided in csv format. Please note that the interpretation of the GWT data needs to be done with consideration of environmental and well characteristics at the site and uncertainty in various variables. For more information on GWT and SM data, please contact the author.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

SPRUCE Whole Ecosystem Warming (WEW) Environmental Data and Water Table Summaries, Marcell Experimental Forest, Minnesota, 2015-2024

This data set contains observations of photosynthetically active radiation (PAR), precipitation, soil temperature, soil volumetric water content, air temperature, relative humidity, and normalized water table depth that are summarized on a daily, weekly, monthly, and annual basis for each of the SPRUCE plots. Observations span 2015-2024. This dataset draws on several datasets (Hanson et al. 2016; Hanson et al. 2020; and Warren, unpublished data) and compiles these environmental observations into useful formats for data analysis. These environmental metrics can be used to understand the environmental conditions inside SPRUCE environmental chambers throughout the durations of the experiment and can be paired with other data for modeling and analysis. R code used to generate these files is provided as part of the data package. This dataset contains four data files in comma separate (.csv) format and a compressed folder (*.zip) containing three R (*.r) scripts. Additional metadata are provided: one data dictionary and a file-level metadata file in comma separate (.csv) format and a user guide in PDF (*.pdf) format. User note: Users must cite the original dataset/s along with this dataset when publishing any analyses using this dataset. Details on the dataset used to compile each variable are available in the header row of the files and in the user guide.

air temperature↗
DOE OSTI2022

Examining the peatland shrubification-evapotranspiration feedback following multi-decadal water table manipulation

Northern peatlands are globally important long-term sinks of carbon due to their predominantly saturated conditions. However, these ecosystems are expected to become drier with climate change, potentially leading to shrubification. As such, the response of the shrubification–evapotranspiration (ET) feedback may be of critical importance to future peatland energy, water and carbon dynamics. Here we examined the effect of multi-decadal peatland water table (WT) alteration at three adjacent sites with increasing depth to WT (WET, INTermediate, and DRY). In order to better understand the WT–shrubification–ET feedback, we measured peatland vegetation composition, microtopography and ET partitioning, where ET was measured at the ecosystem, microform, and leaf level using eddy covariance (EC), chambers and porometry, respectively. Averaged across microforms and WT treatments, there was a difference in the median measured leaf resistance (r leaf ) between plant functional types ranging from 213 s m -1 for erect dwarf shrubs, 325 s m -1 for graminoids/sedges, and 520 s m -1 for prostrate dwarf shrubs. Scaled based on LAI, the low r leaf of erect dwarf shrubs dominated hummocks, where sites with a higher proportion of hummocks had lower median canopy resistance (r v ) of 141, 133 and 130 s m -1 at the WET, INT and DRY sites respectively. Nevertheless, ET was highest at the WET site and similar between the INT and DRY sites, with greater evaporation from the moss surface at the WET site. Porometry and EC data along with a three-source model were used to independently assess the evaporative contribution from the moss surface, which ranged from 17% to 40%. For moderate and persistent changes in WT from land-use or climate change, our results suggest vegetation succession is minimal, but the microtopographic development and the concomitant differences in LAI for the various plant functional types is key to understanding changes in total ET and partitioning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Effects of Water Table Fluctuation on Greenhouse Gas Emissions from Wetland Soils in the Peruvian Amazon

Amazonian swamp forests remove large amounts of carbon dioxide (CO 2 ) but produce methane (CH 4 ). Both are important greenhouse gases (GHG). Drought and cultivation cut the CH 4 emissions but may release CO 2 . Varying oxygen content in nitrogen-rich soil produces nitrous oxide (N 2 O), which is the third most important GHG. Despite the potentially tremendous changes, GHG emissions from wetland soils under different land uses and environmental conditions have rarely been compared in the Amazon. We measured environmental characteristics, and CO 2 , CH 4 and N 2 O emissions from the soil surface with manual opaque chambers in three sites near Iquitos, Peru from September 2019 to March 2020: a pristine peat swamp forest, a young forest and a slash-and-burn manioc field. The manioc field showed moderate soil respiration and N 2 O emission. The peat swamp forests under slight water table drawdown emitted large amounts of CO 2 and CH 4 . A heavy post-drought shower created a hot moment of N 2 O in the pristine swamp forest, likely produced by nitrifiers. All in all, even small changes in soil moisture can create hot moments of GHG emissions from Amazonian wetland soils, and should therefore be carefully monitored.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Coupling subsurface and above-surface models for optimizing the design of borefields and district heating and cooling systems in the presence of varying water-table depth. In: Proceedings, 46th Workshop on Geothermal Reservoir Engineering

Dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange. Current modeling approaches in building and district energy simulation tools typically consider heat conduction through the ground between boreholes, without flow of groundwater. On the other hand, detailed simulation tools for subsurface heat and mass transfer exist, but these fall short in simulating above-surface energy systems. To support the design and operation of such systems, we have developed a coupled model including a software package for building and district energy simulation, and software for detailed heat and mass transfer in the ground. For the first, we use the open-source Modelica Buildings Library, which includes dynamic simulation models for building and district energy and control systems. For the heat and mass transfer in the soil, we use the TOUGH simulator. TOUGH can model heat and multi-phase, multi-component mass transport for a variety of fluid systems, as well as chemical reactions, in fractured porous media. In previous work, we described the coupling of these software packages, including how time-dependent boundary conditions for the borehole walls are synchronized for use in Modelica and TOUGH. We verified that the coupled Modelica/TOUGH code produced consistent results with the original Modelica code for an idealized problem in which heat transfer was purely by conduction in a uniform geologic medium. Here, we examine less idealized problems for which TOUGH’s advanced capabilities for modeling fluid flow are required. The first problem has a shallow vadose zone, and the second problem has a thicker vadose zone with a water-table depth that varies in time, which requires a fine vertical grid discretization for the TOUGH model.

Doughtry, Christine↗
DOE OSTI2022

Incorporating Heterogeneity into 3D Geologic Models for the Alluvial Basin Reference Case

The unsaturated zone alluvium reference case is one of several geologic systems under consideration by the U.S. Department of Energy Office of Nuclear Energy for hosting repositories for spent nuclear fuel and associated waste (Sevougian et al., 2019). As noted by Mariner et al. (2018), the generic alluvial basin offers positive attributes that merit its consideration as a reference case by the Spent Fuel and Waste Science and Technology (SFWST) campaign. Hundreds of alluvial basins and sub-basins are scattered across the arid western United States (Figure 1-1). Precipitation and infiltration rates are relatively low with high evapotranspiration, resulting in deep regional water tables. Deep regional water tables allow for significant vertical separation between proposed repository depths and groundwater and thus longer transport paths from a hypothetical repository to an aquifer. Accumulations of alluvial sediments within these basins are typically on the order of hundreds of meters, and locally may exceed 1,000 m in thickness, as is the case for the Deming sub-basin in southern New Mexico. In alluvial basins, alluvium creates a thick geologic host medium that serves as the natural barrier system (NBS) in the conceptual model framework of a geologic disposal system and isolates the waste packages from receptors in the biosphere. Further, alluvial basin fill is typically comprised of stacked playa and lacustrine deposits along the basin axis (Perry et al., 2018). Characterized by low permeability, these layers protect the biosphere above the repository and the groundwater resources below the repository by limiting flow and transport of radionuclides.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Peatland hydrology across scale: a probabilistic framework for confronting variability, heterogeneity, and uncertainty (Final Report)

Our project aimed to guide the representations of peatland hydrology and water-carbon feedbacks within Earth System Models, by improving process understanding and developing parsimonious models that elucidate the effects of hydroclimatic variability and spatial heterogeneity. Our research questions centered on the three key drivers of peatland hydrology: (1) seasonal and interannual hydroclimatic fluctuations, (2) spatial heterogeneity of peatland microtopography, and (3) hydrological connectivity across landscape units within a peatland watershed. Our analyses and model testing used existing long-term datasets within the Marcell Experimental Forest (MEF), with new data collected whenever necessary. To date, we have demonstrated the strong influence of water table elevations on the temperature sensitivity of CH 4 emissions, using a newly developed eddy covariance dataset spanning eleven years at MEF. Specifically, higher water tables dampen the increase in CH 4 emissions in the spring as well as their decrease in the fall, resulting in hysteresis. These results imply that any hydroclimatological changes in peatlands that shift seasonal water availability from winter to summer will increase annual CH 4 emissions, even if soil temperature remains unchanged. To further investigate water table elevation change within the peatland microtopography, we installed automated water table gauges across four bog-forest transects (the “lagg”) in two peatland watersheds at MEF, which are hotspots of intense biogeochemical activity. These measurements will give us new information about the extent of lagg expansion and contraction during snowmelt and high intensity rainfall events, as well as the directionality of water and nutrient flow into the bog from the surrounding forests. Finally, we investigated the hydrological connectivity across the peatland watershed complex during early spring – a critical period where water table is elevated from snowmelt – using extended hydrological records from MEF (e.g., snow and frost depths, water table elevations, streamflow). The importance of thermal and wintertime processes within the Energy Exascale Earth System Model (E3SM) was determined through sensitivity analyses. Results from data analyses show that (i) streamflow has decreased over decades likely due to increased evapotranspiration rates (despite no detectable trends in precipitation), (ii) spring streamflow generation is controlled by a sequence of fill-and-spill pathways from the snowpack to the stream through peatland water stores, and (iii) frost depth is a key explanatory variable for the timing and magnitude of streamflow. These results suggest that frost plays an important role in connecting surface water storage in peatlands to stream outlets, and that the hydrological connectivity across the peatland watershed complex can mediate the sensitivity of hydrological responses to climate variations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Quantifying Subsurface Flow and Solute Transport in a Snowmelt‐Recharged Hillslope With Multiyear Water Balance

Abstract Quantifying flow and transport from hillslopes is vital for understanding water quantity and quality in rivers, but remains obscure because of limited subsurface measurements. Using measured hydraulic conductivity K profiles and water balance over a single year to calibrate a transmissivity feedback model for a hillslope in the East River watershed (Colorado) proved unsatisfactory for predicting flow over the subsequent years. Well‐constrained field‐scale K were obtained by optimizing subsurface flux predictions over years having large differences in recharge, and by including estimates of interannual transfer of excess snowmelt recharge. Water and solute exports during high snowmelt recharge occur predominantly via shallow groundwater flow through weathered rock and soil because of their enlarged transmissivities under saturated conditions. Conversely, these shallow pathways are less active in snow drought years when the water table remains deeper within the weathering zone. Hillslope soil water monitoring showed that rainfall does not infiltrate deeply during summer and fall months, and revealed water losses consistent with model ET predictions. By combining water table‐dependent fluxes with pore water chemistry in different zones, time‐dependent rates of solute exports become predictable. As an example, calibrated K were combined with dissolved nitrogen concentrations in pore waters to show the snowmelt‐dependence of reactive nitrogen exported from the hillslope, further supporting the recent finding that the weathering zone is the dominant source of reactive nitrogen at this site. Subsurface export predictions can now be obtained for wide ranges of recharge based on measurements of water table elevation and profiles of pore water chemistry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Belowground plant allocation regulates rice methane emissions from degraded peat soils

Carbon-rich peat soils have been drained and used extensively for agriculture throughout human history, leading to significant losses of their soil carbon. One solution for rewetting degraded peat is wet crop cultivation. Crops such as rice, which can grow in water-saturated conditions, could enable agricultural production to be maintained whilst reducing CO 2 and N 2 O emissions from peat. However, wet rice cultivation can release considerable methane (CH 4 ). Water table and soil management strategies may enhance rice yield and minimize CH 4 emissions, but they also influence plant biomass allocation strategies. It remains unclear how water and soil management influences rice allocation strategies and how changing plant allocation and associated traits, particularly belowground, influence CH 4 -related processes. We examined belowground biomass (BGB), aboveground biomass (AGB), belowground:aboveground ratio (BGB:ABG), and a range of root traits (root length, root diameter, root volume, root area, and specific root length) under different soil and water treatments; and evaluated plant trait linkages to CH 4 . Rice (Oryza sativa L.) was grown for six months in field mesocosms under high (saturated) or low water table treatments, and in either degraded peat soil or degraded peat covered with mineral soil. We found that BGB and BGB:AGB were lowest in water saturated conditions where mineral soil had been added to the peat, and highest in low-water table peat soils. Furthermore, CH 4 and BGB were positively related, with BGB explaining 60% of the variation in CH 4 but only under low water table conditions. Our results suggest that a mix of low water table and mineral soil addition could minimize belowground plant allocation in rice, which could further lower CH 4 likely because root-derived carbon is a key substrate for methanogenesis. Minimizing root allocation, in conjunction with water and soil management, could be explored as a strategy for lowering CH 4 emissions from wet rice cultivation in degraded peatlands.

54 ENVIRONMENTAL SCIENCES↗