Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “W(ClO)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Materials Data on W(ClO)2 by Materials Project

WO2Cl2 crystallizes in the orthorhombic Pmc2_1 space group. The structure is two-dimensional and consists of one WO2Cl2 sheet oriented in the (0, 0, 1) direction. W6+ is bonded to four O2- and two equivalent Cl1- atoms to form distorted corner-sharing WCl2O4 octahedra. The corner-sharing octahedra tilt angles range from 0–5°. There are a spread of W–O bond distances ranging from 1.84–2.03 Å. Both W–Cl bond lengths are 2.33 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a linear geometry to two equivalent W6+ atoms. In the second O2- site, O2- is bonded in a linear geometry to two equivalent W6+ atoms. Cl1- is bonded in a single-bond geometry to one W6+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on NaW(ClO)2 by Materials Project

NaWO2Cl2 crystallizes in the orthorhombic Amm2 space group. The structure is three-dimensional. Na1+ is bonded to six Cl1- atoms to form distorted NaCl6 pentagonal pyramids that share corners with six equivalent WCl2O4 octahedra, corners with four equivalent NaCl6 pentagonal pyramids, edges with two equivalent NaCl6 pentagonal pyramids, and faces with two equivalent NaCl6 pentagonal pyramids. The corner-sharing octahedra tilt angles range from 44–72°. There are two shorter (2.82 Å) and four longer (2.90 Å) Na–Cl bond lengths. W5+ is bonded to four O2- and two Cl1- atoms to form distorted WCl2O4 octahedra that share corners with four equivalent WCl2O4 octahedra and corners with six equivalent NaCl6 pentagonal pyramids. The corner-sharing octahedra tilt angles range from 2–3°. There is two shorter (1.94 Å) and two longer (1.95 Å) W–O bond length. There are one shorter (2.45 Å) and one longer (2.55 Å) W–Cl bond lengths. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a linear geometry to two equivalent W5+ atoms. In the second O2- site, O2- is bonded in a linear geometry to two equivalent W5+ atoms. There are two inequivalent Cl1- sites. In the first Cl1- site, Cl1- is bonded in a 5-coordinate geometry to four equivalent Na1+ and one W5+ atom. In the second Cl1- site, Cl1- is bonded in a 3-coordinate geometry to two equivalent Na1+ and one W5+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2021

X-ray Transient Absorption Studies of Exciton Self-Trapping

Here, we present optical pump/X-ray absorption probe studies to probe changes in electronic distribution and local structure upon formation of a self-trapped exciton. The experiments were carried out on the mixed-valence halide-bridged transition metal linear chain charge density wave material [Pt(en 2 )][Pt(en 2 )Cl 2 ]·(ClO 4 ) 4 . Photoinduced changes in the Pt L III XANES spectrum were measured on a picosecond time scale following generation of excitons via optical excitation of the intervalence charge transfer transition. Ab initio FEFF9 modeling of the spectra and the associated angular momentum projected density of states was used to interpret the response. We find photoinduced changes reflecting electronic redistribution and local lattice distortions that correspond to strong localization of the self-trapped state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Correlating Mechanical Sensitivity with Spin Transition in the Explosive Spin Crossover Complex [Fe(Htrz) 3 ] n [ClO 4 ] 2 n

Spin crossover complexes are known to undergo bond length, volume, and enthalpy changes during spin transition. In an explosive spin crossover complex, these changes could affect the mechanical and initiation sensitivity of the explosive and lead to the development of a new class of sensitivity switchable materials. To explore this relationship, the well-known spin crossover compound [Fe(Htrz) 3 ] n [ClO 4 ] 2n (1) was re-evaluated for its explosive properties, and its mechanical impact sensitivity was correlated to spin transition. A variable temperature impact test was developed and used to evaluate the impact sensitivity of 1 in the low spin (LS, S = 0), thermally accessed high spin (HS, S = 2), and mixed LS and HS states. For comparison, the structurally similar Ni compound, [Ni(Htrz) 3 ] n [ClO 4 ] 2n (2), which does not undergo a spin transition at accessible temperatures, was synthesized and characterized, and its explosive properties and variable temperature impact sensitivity measured. These results reveal a correlation between impact sensitivity and spin transition, where 1 exhibits lower impact sensitivity in the LS state and increases in sensitivity upon transition to the HS state. Here, density functional theory was used to predict structural changes that occur upon spin transition that correlate to the change in sensitivity. This demonstrates, for the first time, an explosive spin crossover compound (ExSCO) that exhibits switchable impact sensitivity with a fully reversible internal switching mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Origin of the isotopic composition of natural perchlorate: Experimental results for the impact of reaction pathway and initial ClO x reactant

Natural perchlorate (ClO 4 - ) exists in many places on Earth, in lunar regolith, meteorites, and on the surface of Mars. Terrestrial natural ClO 4 - has widely variable Cl and O stable isotopic compositions (δ 37 Cl, δ 18 O, Δ 17 O). The δ 18 O and Δ 17 O values of ClO 4 - from the most hyper-arid locations co-vary. ClO 4 - from less arid areas has relatively little 17 O excess and poor Δ 17 O-δ 18 O correlation. ClO 4 - from the Atacama Desert has unusually low δ 37 Cl (<-10‰) and exhibits a positive correlation between δ 37 Cl and δ 18 O, while the δ 37 Cl of ClO 4 - from all other locations varies between -5 and +7‰ with no δ 37 Cl-δ 18 O covariation. To evaluate the impact of different precursors (ClO x ) and reaction pathways on the isotopic composition of ClO 4 - , we measured the isotopic composition of ClO 4 - produced in the laboratory by UV or O 3 mediated aqueous oxidation of Cl-, OCl-, ClO2-, and ClO2° as well as O 3 mediated oxidation of dry NaCl. ClO x oxidation in aqueous or dry systems enriched in O 3 produced ClO 4 - with Δ 17 O values that generally increased with the number of O atoms required and included evidence that the site-specific 17 O anomaly in O 3 was preferentially transferred to ClO 4 - . Based on the inferred number of O atoms sourced from O 3 , and known Cl and O reaction pathways, it appears that ClO 2 ° and ClO 3 * were required intermediates in the production of ClO 4 - in the O 3 experiments. ClO x aqueous oxidation by UV irradiation produced ClO 4 - with a large range of δ 18 O values and little or no 17 O anomaly. ClO 3 - was produced to a much greater extent than ClO 4 - in all experiments except dry oxidation of NaCl by O 3 . The isotopic composition of ClO 3 - was distinct from that of ClO 4 - produced from the same initial reactants. Combined results of O 3 and UV mediated reactions largely bracketed the range of natural ClO 4 - δ 18 O and Δ 17 O values as well as δ 37 Cl values of non-Atacama natural samples, but no conditions produced the low δ 37 Cl values of Atacama ClO 4 - . Finally, our results indicate that variation in production mechanisms, possibly combined with isotopically variable precursors, could be responsible for much of the observed isotopic variation in natural ClO 4 - and ClO 3 - .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural Tuning of Self‐Conductive Polymer as Gas Diffusion Layer for Electrocatalytic Reactions at High Current

Electrocatalytic conversions offer a promising route for sustainable chemical production using renewable energy. Gas diffusion layers (GDLs) enable selective product formation at high current densities but suffer from electrolyte flooding, and polytetrafluoroethylene (PTFE)-based GDLs typically require metal conductive layers, which constrain catalyst development. A recently developed GDL configuration, electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT)-coated PTFE, demonstrates notable flooding resistance, but suffers from gas diffusion limitations at elevated currents due to limited gas diffusion through the PEDOT layer. Here, different dopants in PEDOT are exploited to modify the physical properties and enhance gas transport. ClO 4 − -doped PEDOT exhibits superior performance due to optimized physical structure, leading to increased gas permeance and faradaic efficiency (FE) for CO production during electrocatalytic CO 2 reduction. Further optimization of coverage and thickness achieved by adjusting charge density led to an optimal configuration at 33 mC cm −2 . This GDL supports various metal electrocatalysts and demonstrates FE CO of > 90% for over 150 h at −200 mA cm −2 using a commercial silver electrocatalyst. This work highlights the importance of GDL engineering in enhancing performance and durability for long-term electrocatalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗