Identifying Lagrangian coherent vortices in a mesoscale ocean model
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Widely known for their uses in displays and electro-optics, liquid crystals are more than just technological marvels. They vividly reveal the topology and structure of various solitonic and singular field configurations, often markedly resembling the ones arising in many field theories and in the areas ranging from particle physics to optics, hard condensed matter and cosmology. In this review, we focus on chiral nematic liquid crystals to show how these experimentally highly accessible systems provide valuable insights into the structure and behavior of fractional, full, and multi-integer two-dimensional skyrmions, dislocations and both abelian and non-abelian defect lines, as well as various three-dimensionally localized, often knotted structures that include hopfions, heliknotons, torons and twistions. Finally, we provide comparisons of some of these field configurations with their topological counterparts in chiral magnets, discussing close analogies between these two condensed matter systems.
Nonlinear electrical transport studies at high pulsed magnetic fields, above the range accessible by dc magnets, are of direct fundamental relevance to the physics of superconductors, domain-wall, charge-density waves, and topological semimetal. All-superconducting very high field magnets also make it technologically relevant to study vortex matter in this regime. However, pulsed magnetic fields reaching 100 T in milliseconds impose technical and fundamental challenges that have prevented the realization of these studies. Here, we present a technique for sub-microsecond smart current-voltage measurements, which enables the determination of the superconducting critical current in pulsed magnetic fields, beyond the reach of any dc magnet. We demonstrate the excellent agreement of this technique with low dc field measurements on Y 0.77 Gd 0.23 Ba 2 Cu 3 O 7 coated conductors with and without BaHfO 3 nanoparticles. Exploring the uncharted high-magnetic-field region, we discover a characteristic influence of the magnetic field rate of change ( dH/dt ) on the current-voltage curves in a superconductor. As a result, we fully capture this unexplored vortex physics through a theoretical model based on the asymmetry of the vortex-velocity profile produced by the applied current.
A recent scanning tunneling microscopy (STM) experiment reports the observation of a charge-density wave (CDW) with a period of approximately 8a in the halo region surrounding the vortex core, in striking contrast to the approximately 4a period CDWs that are commonly observed in the cuprates. Inspired by this work, we study a model where a bidirectional pair-density wave (PDW) with period 8 is at play. This further divides into two classes: (1) where the PDW is a competing state of the d-wave superconductor and can exist only near the vortex core where the d-wave order is suppressed and (2) where the PDW is the primary order, the so-called “mother state” that persists with strong phase fluctuations to high temperature and high magnetic field and lies behind the pseudogap phenomenology. We study the charge-density wave structures near the vortex core in these models. We emphasize the importance of the phase winding of the d-wave order parameter. The PDW can be pinned by the vortex core due to this winding and become static. Furthermore, the period-8 CDW inherits the properties of this winding, which gives rise to a special feature of the Fourier transform peak, namely, it is split in certain directions. There is also a line of zeros in the inverse Fourier transform of filtered data. We propose that these are key experimental signatures that can distinguish between the PDW-driven scenario from the more mundane option that the period-8 CDW is primary. We discuss the pro's and con's of the options considered above. Lastly, we attempt to place the STM experiment in the broader context of pseudogap physics of underdoped cuprates and relate this observation to the unusual properties of x-ray scattering data on CDW carried out to very high magnetic field.
We study d-wave superconductivity in twisted bilayer graphene and reveal phenomena that arise due to the moire superlattice. In the d-wave pairing, the relative motion (RM) of two electrons in a Cooper pair can have either d + id or d - id symmetry with opposite angular momenta. Due to the enlarged moire superlattice, the center-of-mass motion (COMM) can also carry a finite angular momentum while preserving the moire periodicity. By matching the total angular momentum, which has contributions from both the RM and the COMM, Cooper pairs with d + id and d - id RMs are intrinsically coupled in a way such that the COMM associated with one of the RMs has a spontaneous vortex-antivortex lattice configuration. Another phenomenon is that the chiral d-wave state carries spontaneous bulk circulating supercurrent. The chiral d-wave superconductors are gapped and also topological as characterized by an integer Chern number. Nematic d-wave superconductors, which could be stabilized, for example, by uniaxial strain, are gapless with point nodes.
Not Available
Abstract The climatological mean barotropic vorticity budget is analyzed to investigate the relative importance of surface wind stress, topography, planetary vorticity advection, and nonlinear advection in dynamical balances in a global ocean simulation. In addition to a pronounced regional variability in vorticity balances, the relative magnitudes of vorticity budget terms strongly depend on the length‐scale of interest. To carry out a length‐scale dependent vorticity analysis in different ocean basins, vorticity budget terms are spatially coarse‐grained. At length‐scales greater than 1,000 km, the dynamics closely follow the Topographic‐Sverdrup balance in which bottom pressure torque, surface wind stress curl and planetary vorticity advection terms are in balance. In contrast, when including all length‐scales resolved by the model, bottom pressure torque and nonlinear advection terms dominate the vorticity budget (Topographic‐Nonlinear balance), which suggests a prominent role of oceanic eddies, which are of km in size, and the associated bottom pressure anomalies in local vorticity balances at length‐scales smaller than 1,000 km. Overall, there is a transition from the Topographic‐Nonlinear regime at scales smaller than 1,000 km to the Topographic‐Sverdrup regime at length‐scales greater than 1,000 km. These dynamical balances hold across all ocean basins; however, interpretations of the dominant vorticity balances depend on the level of spatial filtering or the effective model resolution. On the other hand, the contribution of bottom and lateral friction terms in the barotropic vorticity budget remains small and is significant only near sea‐land boundaries, where bottom stress and horizontal viscous friction generally peak.
We numerically examine the manipulation of superconducting vortices interacting with a moving trap representing a magnetic force tip translating across a superconducting sample containing a periodic array of pinning sites. As a function of the tip velocity and coupling strength, we find five distinct dynamic phases, including a decoupled regime where the vortices are dragged a short distance within a pinning site, an intermediate coupling regime where vortices in neighboring pinning sites exchange places, an intermediate trapping regime where individual vortices are dragged longer distances and exchange modes of vortices occur in the surrounding pins, an intermittent multiple trapping regime where the trap switches between capturing one or two vortices, and a strong coupling regime in which the trap permanently captures and drags two vortices. In some regimes we observe the counterintuitive behavior that slow moving traps couple less strongly to vortices than faster moving traps; however, the fastest moving traps are generally decoupled. The different phases can be characterized by the distances the vortices are displaced and the force fluctuations exerted on the trap. We find different types of stick-slip motion depending on whether vortices are moving into and out of pinning sites, undergoing exchange, or performing correlated motion induced by vortices outside of the trap. Finally, our results are general to the manipulation of other types of particle-based systems interacting with periodic trap arrays, such as colloidal particles or certain types of frictional systems.
This study examines the dynamics of vortical interactions and their implications for mitigating thermoacoustic instability in a turbulent combustor. The regions of intense vortical interactions are identified as vortical communities in the network space of weighted directed vortical networks constructed from two-dimensional experimental velocity data. One can expect vortical interactions in the combustor to be strongest near the moment of vortex shedding, as the shed vortices gradually weaken due to dissipation while convecting downstream. However, we show that, during the state of thermoacoustic instability, there is a non-trivial consistent phase lag of approximately 52° between the shedding of the coherent structures from the backward-facing step and the time instant when the vortical interactions attain their local maximum value. We explain this phase lag by investigating the correlation between acoustic pressure fluctuations, spatio-temporal dynamics of coherent structures and vortical interactions in the reaction field of the combustor. We also show the aperiodic variation of vortical interactions during the states of combustion noise and aperiodic epochs of intermittency. Furthermore, the spatio-temporal evolution of pairs of vortical communities with the maximum inter-community interactions provides insight into explaining the critical regions detected in the reaction field during the states of intermittency and thermoacoustic instability, also identified in previous studies. As a result, we further show that the most efficient suppression of thermoacoustic instability via air microjet injection is achieved when steady air jets are introduced to disrupt the maximum inter-community interactions present during the state of thermoacoustic instability.
Growth of the single-fluid single-mode Rayleigh-Taylor instability (RTI) is revisited in 2D and 3D using fully compressible high-resolution simulations. We conduct a systematic analysis of the effects of perturbation Reynolds number (Rep) and Atwood number (A) on RTI’s late-time growth. Contrary to the common belief that single-mode RTI reaches a terminal bubble velocity, we show that the bubble re-accelerates when Rep is sufficiently large, consistent with [Ramaparabhu et al. 2006, Wei and Livescu 2012]. However, unlike in [Ramaparabhu et al. 2006], we find that for a sufficiently high Rep, the bubble’s late-time acceleration is persistent and does not vanish. Analysis of vorticity dynamics shows a clear correlation between vortices inside the bubble and re-acceleration. Due to symmetry around the bubble and spike (vertical) axes, the self-propagation velocity of vortices points in the vertical direction. If viscosity is sufficiently small, the vortices persist long enough to enter the bubble tip and accelerate the bubble [Wei and Livescu 2012]. A similar effect has also been observed in ablative RTI [Betti and Sanz 2006]. As the spike growth increases relative to that of the bubble at higher A, vorticity production shifts downward, away from the centerline and toward the spike tip. We modify the Betti-Sanz model for bubble velocity by introducing a vorticity efficiency factor η = 0.45 to accurately account for re-acceleration caused by vorticity in the bubble tip. It had been previously suggested that vorticity generation and the associated bubble re-acceleration are suppressed at high A. However, we present evidence that if the large Rep limit is taken first, bubble re-acceleration is still possible. Our results also show that re-acceleration is much easier to occur in 3D than 2D, requiring smaller Rep thresholds.
Coronary artery disease (CAD) is highly prevalent and associated with adverse events. Challenges have emerged in the treatment of intermediate coronary artery stenoses. These lesions are often interrogated with fractional flow reserve (FFR) testing to determine if a stenosis is likely to be causative for ischemia in a cardiac territory. This invasive test requires insertion of a pressure wire into a coronary vessel. Recently computational fluid dynamics (CFD) has been used to noninvasively assess fractional flow reserve in vessels reconstructed from medical imaging data. However, many of these simulations are unable to provide additional information about intravascular hemodynamics, including velocity, endothelial shear stress (ESS), and vorticity. We hypothesized that vorticity, which has demonstrated utility in the assessment of ventricular and aortic diseases, would also be an important hemodynamic factor in CAD. Three-dimensional (3D), patient-specific coronary artery geometries that included all vessels >1 mm in diameter were created from angiography data obtained from 10 patients who underwent diagnostic angiography and FFR testing (n = 9). A massively parallel CFD solver (HARVEY) was used to calculate coronary hemodynamic parameters including pressure, velocity, ESS, and vorticity. These simulations were validated by comparing velocity flow fields from simulation to both velocities derived from in vitro particle image velocimetry and to invasively acquired pressure wire-based data from clinical testing. There was strong agreement between findings from CFD simulations and particle image velocimetry experimental testing (p < 0.01). CFD-FFR was also highly correlated with invasively measured FFR (ρ = 0.77, p = 0.01) with an average error of 5.9 ± 0.1%. CFD-FFR also had a strong inverse correlation with the vorticity (ρ = -0.86, p = 0.001). Simulations to determine the effect of the coronary stenosis on intravascular hemodynamics demonstrated significant differences in velocity and vorticity (both p < 0.05). Further evaluation of an angiographically normal appearing non-FFR coronary vessel in patients with CAD also demonstrated differences in vorticity when compared with FFR vessels (p < 0.05). The use of highly accurate 3D CFD-derived intravascular hemodynamics provides additional information beyond pressure measurements that can be used to calculate FFR. Vorticity is one parameter that is modified by a coronary stenosis and appears to be abnormal in angiographically normal vessels in patients with CAD, highlighting a possible use-case in preventative screening for early coronary disease.
The controlled manipulation of Abrikosov vortices is essential for both fundamental science and logical applications. However, achieving nanoscale manipulation of vortices while simultaneously measuring the local density of states within them remain challenging. Here, we demonstrate the manipulation of Abrikosov vortices by moving the pinning center, namely one-dimensional wrinkles, on the terminal layers of Fe(Te,Se) and LiFeAs, by utilizing low-temperature scanning tunneling microscopy/spectroscopy (STM/S). The wrinkles trap the Abrikosov vortices induced by the external magnetic field. In some of the wrinkle-pinned vortices, robust zero-bias conductance peaks are observed. We tailor the wrinkle into short pieces and manipulate the wrinkles by using an STM tip. Strikingly, we demonstrate that the pinned vortices move together with these wrinkles even at high magnetic field up to 6 T. Our results provide a universal and effective routine for manipulating wrinkle-pinned vortices and simultaneously measuring the local density of states on the iron-based superconductor surfaces.
Abstract This study investigates the emergence of hurricane‐like vortices in idealized simulations of rotating moist convection. A Boussinesq atmosphere with simplified thermodynamics for phase transitions is forced by prescribing the temperature and humidity at the upper and lower boundaries. The governing equations are solved numerically using a variable‐density incompressible Navier‐Stokes solver with adaptive mesh refinement to explore the behavior of moist convection under a broad range of conditions. In the absence of rotation, convection aggregates into active patches separated by large unsaturated regions. Rotation modulates this statistical equilibrium state so that the self‐aggregated convection organizes hurricane‐like vortices. The warm and saturated air converges to the center of the vortices, and the latent heat released through the upwelling, forms the warm core structure. These hurricane‐like vortices share characteristics similar to tropical cyclones in the earth's atmosphere. The hurricane‐like vortices occur under conditionally unstable conditions where the potential energy given at the boundaries is large enough, corresponding to a moderate rate of rotation. This regime shares many similar characteristics to the tropical atmosphere indicating that the formation of intense meso‐scale vortices is a general characteristic of rotating moist convection. The model used here does not include any interactions with radiation, wind‐evaporation feedback, or cloud microphysics, indicating that, while these processes may be relevant for tropical cyclogenesis in the Earth atmosphere, they are not its primary cause. Instead, our results confirm that the formation and maintenance of hurricane‐like vortices involve a combination of atmospheric dynamics under the presence of rotation and of phase transitions.
Abstract The development and intensification of low-level mesocyclones in supercell thunderstorms have often been attributed, at least in part, to augmented streamwise vorticity generated baroclinically in the forward flank of supercells. However, the ambient streamwise vorticity of the environment (often quantified via storm-relative helicity), especially near the ground, is particularly skillful at discriminating between nontornadic and tornadic supercells. This study investigates whether the origins of the inflow air into supercell low-level mesocyclones, both horizontally and vertically, can help explain the dynamical role of environmental versus storm-generated vorticity in the development of low-level mesocyclone rotation. Simulations of supercells, initialized with wind profiles common to supercell environments observed in nature, show that the air bound for the low-level mesocyclone primarily originates from the ambient environment (rather than from along the forward flank) and from very close to the ground, often in the lowest 200–400 m of the atmosphere. Given that the near-ground environmental air comprises the bulk of the inflow into low-level mesocyclones, this likely explains the forecast skill of environmental streamwise vorticity in the lowest few hundred meters of the atmosphere. The low-level mesocyclone does not appear to require much augmentation from the development of additional horizontal vorticity in the forward flank. Instead, the dominant contributor to vertical vorticity within the low-level mesocyclone is from the environmental horizontal vorticity. This study provides further context to the ongoing discussion regarding the development of rotation within supercell low-level mesocyclones. Significance Statement Supercell thunderstorms produce the majority of tornadoes, and a defining characteristic of supercells is their rotating updraft, known as the “mesocyclone.” When the mesocyclone is stronger at lower altitudes, the likelihood of tornadoes increases. The purpose of this study is to understand if the rotation of the mesocyclone in supercells is due to horizontal spin present in the ambient environment or whether additional horizontal spin generated by the storm itself primarily drives this rotation. Our results suggest that inflow air into supercells and low-level mesocyclone rotation are mainly due to the properties of the environmental inflow air, especially near the ground. This hopefully provides further context to how our community views the development of low-level mesocyclones in supercells.
In classical viscous fluids, turbulent eddies are known to be responsible for the rapid spreading of embedded particles. However, in inviscid quantum fluids where the turbulence is induced by a chaotic tangle of quantized vortices, dispersion of the particles can be achieved via a nonclassical mechanism, i.e., their binding to the evolving vortices. However, knowledge on how the vortices diffuse and spread in quantum-fluid turbulence is very limited, especially for the so-called ultraquantum turbulence (UQT) generated by a random tangle of vortices. Here we report a systematic numerical study of the apparent diffusion of vortices in UQT in superfluid helium-4 using the full Biot-Savart simulation. We reveal that the vortices in the superfluid exhibit a universal anomalous diffusion (superdiffusion) at small times, which transits to normal diffusion at large times. This behavior is found to be the result of a generic scaling property of the vortex velocity. Our simulation at finite temperatures also nicely reproduces recent experimental observations. Lastly, the knowledge obtained from this study may form the base for understanding turbulent transport and universal vortex dynamics in various quantum fluids.
A conformal pinning array can be created by conformally transforming a uniform triangular pinning lattice to produce a new structure in which the six-fold ordering of the original lattice is conserved but where there is a spatial gradient in the density of pinning sites. Here we examine several aspects of vortices interacting with conformal pinning arrays and how they can be used to create a flux flow diode effect for driving vortices in different directions across the arrays. Under the application of an ac drive, a pronounced vortex ratchet effect occurs where the vortices flow in the easy direction of the array asymmetry. When the ac drive is applied perpendicular to the asymmetry direction of the array, it is possible to realize a transverse vortex ratchet effect where there is a generation of a dc flow of vortices perpendicular to the ac drive due to the creation of a noise correlation ratchet by the plastic motion of the vortices. We also examine vortex transport in experiments and compare the pinning effectiveness of conformal arrays to uniform triangular pinning arrays. We find that a triangular array generally pins the vortices more effectively at the first matching field and below, while the conformal array is more effective at higher fields where interstitial vortex flow occurs.