Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “V2O5”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Effect of Nb2O5 and V2O5 addition on the superconducting properties of YBa2Cu3O(y) thin films

The effect of Nb2O5 and V2O5 addition on the superconducting properties and microstructure of YBa2Cu3O(y) has been studied in thin films. Polycrystalline targets for laser ablation were prepared by mixing high purity V2O5 or Nb2O5 powders with a well characterized YBa2Cu3O(y) powder in the range 0 to 4 wt percent by solid state reaction method. Thin films (approximately 1500 A thickness) of the above targets were grown on (100) SrTiO3 (STO) and (100) LaAlO3 (LAO) substrates at 700 C temperature by pulsed laser deposition (PLD) technique. In the case of Nb2O5 addition we have noticed an increase in J(sub c) up to 0.5 wt percent and higher additive concentration (greater than 0.5 wt percent) have degraded the superconducting properties. However, in the case of V2O3 addition, there is an improvement in current density and microstructural properties up to 1 wt percent and the superconducting properties degrade for concentrations greater than 1 wt percent. The best J(sub c) for 0.5 wt percent of Nb2O5 added YBCO thin film is 1.6 x 10(exp 6) A/sq cm and for that of V2O5 added sample is 3.4 x 10(exp 6) A/sq cm at 77 K as compared to the pure YBa2Cu3O(y) (YBCO) film J(sub c) (1.2 x 10(exp 6) A/sq cm) observed on STO substrates. The reason for improvement in J(sub c) and microstructural properties in the case of V2O5 addition could be due to the low melting of V2O5 (690 C) which can act as a very good surfactant during deposition. Over all, we have realized that Nb2O5 addition or V2O5 addition to YBCO have shown significant improvement over the undoped YBa2Cu3O(7-x) films grown under identical conditions.

Srinivas, S.↗
DOE OSTI2025

Interlayer Exciton Polarons in Mesoscopic V 2 O 5 for Broadband Optoelectronic Synapses

Persistent photoconductivity and optoelectronic synaptic behavior are demonstrated in solution-processed mesoscopic α-phase vanadium pentoxide (V 2 O 5 ) thin films. First-principles simulations coupled with the two-site Holstein polaron hopping model show that vacancies at the terminal oxygen position lead to long recombination times because photoexcited electrons and holes reside on different layers separated by the van der Waals gap, forming a weakly coupled interlayer exciton polaron. Mid-gap polaronic states also significantly broaden the photoresponse of the films to span across visible and infrared wavelengths. By controlling the amplitude/intensity, duration, and/or number of optical pulses, tunable optoelectronic memory functions, such as short-term and long-term plasticity, are experimentally established in V 2 O 5 -based optoelectronic synapses. Furthermore, device fabrication was extended to mechanically flexible ultrathin glass substrates. Flexible optoelectronic synapses maintained high performance after 150 bending cycles.

Phan, Thanh Luan [National Renewable Energy Labora↗
NASA NTRS1987

The effect of V2O5 on the growth and properties of Bi-YIG

The effect of V2O5 additions to PbO-Bi2O3 flux was investigated with respect to the properties of Bi-YIG epitaxial films for magnetic bubble devices. The Bi content of the films (including an estimated 10 percent Pt(2+) were calculated from Faraday rotation measurements. For films grown at constant supercooling, the Bi content increased by 60 percent as the V2O5 content of the flux was increased from 0 to 9 mol pct. Lattice constant data were shown to agree with measured Bi and Ca-Si contents. The growth-induced magnetic anisotropy increased proportionally to the Bi content and could be fairly represented by a model; however, the coefficients of the model vary widely between data sets for different melt compositions.

Luther, L. C.↗
DOE OSTI2025

An unexpectedly shrunken bandgap in V2O5 nanoparticles

Synchrotron x-ray spectroscopy was employed to determine the effects of nanostructuring on electronic band structure in V2O5, a promising cathode material and widely used catalyst. V2O5nanoparticle and bulk powders were characterized via P-XRD, electron microscopy, and diffuse reflectance ultraviolet/visible/near-infrared spectroscopy to confirm the optical bandgap. X-ray emission spectroscopy revealed the nanoparticle valence band O 2pstates to be upshifted relative to the bulk, while x-ray absorption spectroscopy and resonant inelastic x-ray scattering showed the lowest V 3dconduction band states to be static. Together, these changes (in conjunction with an increased density of unoccupied lower conduction band states) produce a shrunken bandgap in the V2O5nanoparticles that defies the Burstein-Moss effect. Changes in nanoparticle band structure are generally attributed to oxygen vacancy defects. While nanostructure bandgap reduction is in line with much previous computational work, it is unexpected from most previous experimental results. To our knowledge, this is the first synchrotron x-ray spectroscopy study of a shrunken bandgap achieved in pure V2O5nanoparticles.

Anquillare, E L↗
NASA NTRS1985

Ceramic oxide reactions with V2O5 and SO3

Ceramic oxides are not inert in combustion environments, but can react with, inter alia, SO3, and Na2SO4 to yield low melting mixed sulfate eutectics, and with vanadium compounds to produce vanadates. Assuming ceramic degradation to become severe only when molten phases are generated in the surface salt (as found for metallic hot corrosion), the reactivity of ceramic oxides can be quantified by determining the SO3 partial pressure necessary for molten mixed sulfate formation with Na2SO3. Vanadium pentoxide is an acidic oxide that reacts with Na2O, SO3, and the different ceramic oxides in a series of Lux-Flood type of acid-base displacement reactions. To elucidate the various possible vanadium compound-ceramic oxide interactions, a study was made of the reactions of a matrix involving, on the one axis, ceramix oxides of increasing acidity, and on the other axis, vanadium compounds of increasing acidity. Resistance to vanadium compound reaction increased as the oxide acidity increased. Oxides more acidic than ZrO2 displaced V2O5. Examination of Y2O3- and CeO2-stabilized ZrO2 sintered ceramics which were degraded in 700 C NaVO3 has shown good agreement with the reactions predicted above, except that the CeO2-ZrO2 ceramic appears to be inexplicably degraded by NaVO3.

Jones, R. L.↗
DOE OSTI2020

Materials Data on V2O5 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗
DOE OSTI2022

Delocalization of dark and bright excitons in flat-band materials and the optical properties of V2O5

Abstract The simplest picture of excitons in materials with atomic-like localization of electrons is that of Frenkel excitons, where electrons and holes stay close together, which is associated with a large binding energy. Here, using the example of the layered oxide V 2 O 5 , we show how localized charge-transfer excitations combine to form excitons that also have a huge binding energy but, at the same time, a large electron-hole distance, and we explain this seemingly contradictory finding. The anisotropy of the exciton delocalization is determined by the local anisotropy of the structure, whereas the exciton extends orthogonally to the chains formed by the crystal structure. Moreover, we show that the bright exciton goes together with a dark exciton of even larger binding energy and more pronounced anisotropy. These findings are obtained by combining first principles many-body perturbation theory calculations, ellipsometry experiments, and tight binding modelling, leading to very good agreement and a consistent picture. Our explanation is general and can be extended to other materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Physical and Flow Properties of Glass Forming Chemicals (V2O5, SnO, SnO2, Cr2O3, FeCr2O4, and ZrSiO4) and Mixtures

For a sustainable nuclear waste vitrification process at the Hanford Tank Waste Treatment and Immobilization Plant (WTP), proper selection and consistent supply of glass-forming chemicals (GFCs) are crucial. Establishing rigorous acceptance criteria for the characterization of GFCs will be required to operate the vitrification facility and to mitigate any processing issues or failures. Low-activity wastes (LAW) are blended with GFCs to form slurry melter feeds and vitrified in a melter. To enhance properties of waste glasses, new chemicals are being introduced to the current GFC mixture (Vienna et al. 2016; Muller et al. 2017, 2019). In this study, three new GFCs were evaluated for enhanced LAW glass formulations: chromium oxide (Cr 2 O 3 ), vanadium oxide (V 2 O 5 ), and stannic oxide (SnO 2 ). These three oxide components are included in enhanced waste glass (EWG) formulations and GFCs with the appropriate physical and flow properties are needed. As a starting point, single metal oxide GFCs: Cr 2 O 3 , V 2 O 5 , and SnO 2 were sourced and tested. To characterize these new individual GFCs and mixtures of GFCs, the industrial bulk characterization consultant, Jenike and Johanson, was employed to measure physical and flow properties of individual GFCs and their mixtures. Pacific Northwest National Laboratory (PNNL) also measured several selected physical properties for data evaluation as a quality assurance step. In addition, PNNL measured physical and rheological properties of slurry melter feeds containing those GFCs. Subsequent data analyses and verification were conducted. The purpose of this report is to assess the applicability of these GFCs for LAW vitrification based on their properties. This report will help understand measured data and evaluate new GFCs for use. Moreover, this report may give useful insights to help troubleshoot any GFC and melter feed transport and mixing issues that arise during processing, leading to a successful cleanup mission at WTP.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1995

Porous Silica Sol-Gel Glasses Containing Reactive V2O5 Groups

Porous silica sol-gel glasses into which reactive vanadium oxide functional groups incorporated exhibit number of unique characteristics. Because they bind molecules of some species both reversibly and selectively, useful as chemical sensors or indicators or as scrubbers to remove toxic or hazardous contaminants. Materials also oxidize methane gas photochemically: suggests they're useful as catalysts for conversion of methane to alcohol and for oxidation of hydrocarbons in general. By incorporating various amounts of other metals into silica sol-gel glasses, possible to synthesize new materials with broad range of new characteristics.

Stiegman, Albert E.↗
DOE OSTI2023

Lithium Spatial Distribution and Split-Off Electronic Bands at Nanoscale V 2 O 5 /LiPON Interfaces

A combination of depth-resolved cathodoluminescence spectroscopy (DRCLS) and X-ray photoemission depth profiling (XPS) measured the pronounced changes in both the electronic density of states and lithium composition near the nanoscale LixV2O5/LiPON interface. DRCLS studies of electrochemically lithiated bare V2O5 and the sputterdeposited V2O5 plus LiPON overlayer electrochemically lithiated in stages both showed that in the bulk the luminescence intensity of the “split-off” hybridized bonding density of states was anticorrelated with XPSmeasured Li content, decreasing as the Li content increased. However, the LiPON overlayer was found to modify the band structure of the underlying LixV2O5 (LVO) to a depth of at least 30 nm beneath the V2O5 interface. DRCLS spectra near the electrochemically lithiated LiPON/ LVO interface showed a significant intensity of the split-off band, implying a low Li content. However, XPS depth profiling revealed a pronounced negative gradient of Li extending from a maximum Li content at the intimate LiPON boundary to its lowest content of ∼30 nm into the V2O5 in the same region, indicating a strong interaction between band structure and Li electrochemical potential near this heterojunction. These results provide evidence for substantial effects on the local band structure near an electrolyte/cathode interface and insights into the electrochemical interface behavior of solid-state batteries in general.

25 ENERGY STORAGE↗
DOE OSTI2022

Toward Rational Design of Supported Vanadia Catalysts of Lignin Conversion to Phenol

In sustainable chemical engineering, catalytic upgrading of lignocellulosic biomass has recently gained attention for producing renewable platform chemicals. To achieve maximal biomass utilization, upgrading the underutilized lignin components is essential. Among various catalysts for lignin upgrading, supported vanadia (V2O5) catalysts are promising because of their cost-effectiveness and tunability of either dopant metals or catalyst supports. Here, computational studies are conducted to derive rational design guidelines of supported V2O5 catalysts for accomplishing the high catalytic activity of lignin upgrading to phenol, a key compound for producing bioplastics and biofuel blendstocks. Guaiacol was used as the model compound since it comprises the highest portion of depolymerized lignin. Computational mechanistic studies for the catalytic guaiacol conversion to phenol were performed for the V2O5 catalysts on Titania (TiO2) and silica (SiO2) to explain higher experimental phenol yields on V2O5/SiO2 than V2O5/TiO2. The hydrogen migration from the methoxy group to the aryl ring was identified as a rate-determining step, and the overall activation energies on the two catalysts were compared. A structural analysis was carried out for the catalysts and rate-determining transition states to gain further insights from mechanistic studies. It was concluded that the tilt angle of the aryl group in the hydrogen migration transition state is a key descriptor determining the catalytic activity of phenol formation. These features correlate well with activation energies and experimental phenol yields, indicating that they provide design guidelines for supported metal catalysts for lignin upgrading before experiments.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2022

Effect of crystallite geometries on electrochemical performance of porous intercalation electrodes by multiscale operando investigation

Lithium-ion batteries are yet to realize their full promise because of challenges in the design and construction of electrode architectures that allow for their entire interior volumes to be reversibly accessible for ion storage. Electrodes constructed from the same material and with the same specifications, which differ only in terms of dimensions and geometries of the constituent particles, can show surprising differences in polarization, stress accumulation and capacity fade. Here, using operando synchrotron X-ray diffraction and energy dispersive X-ray diffraction (EDXRD), we probe the mechanistic origins of the remarkable particle geometry-dependent modification of lithiation-induced phase transformations in V2O5 as a model phase-transforming cathode. A pronounced modulation of phase coexistence regimes is observed as a function of particle geometry. Specifically, a metastable phase is stabilized for nanometre-sized spherical V2O5 particles, to circumvent the formation of large misfit strains. Spatially resolved EDXRD measurements demonstrate that particle geometries strongly modify the tortuosity of the porous cathode architecture. Greater ion-transport limitations in electrode architectures comprising micrometre-sized platelets result in considerable lithiation heterogeneities across the thickness of the electrode. These insights establish particle geometry-dependent modification of metastable phase regimes and electrode tortuosity as key design principles for realizing the promise of intercalation cathodes. Designing electrode architectures for Li-ion batteries that can be reversibly accessible for ion storage can be challenging. Using operando techniques the mechanistic origin of lithiation-induced phase transformations in a V2O5 model cathode is now clarified.

Luo, Yuting↗
DOE OSTI2021

Structure-Activity Relationships of Hydrothermally Aged Titania-Supported Vanadium-Tungsten Oxide Catalysts for SCR of NOx Emissions with NH3

Supported V2O5-WO3/TiO2 materials employed as selective catalytic reduction (SCR) catalysts for NOx emission control from power plants. Fresh SCR catalysts usually receive exposure to harsh treatments in industry to accelerate catalyst activation (calcination in air at 650oC) and catalyst aging (hydrothermal aging at 650oC) in a way that represents various points in the catalyst/product lifetime. The present study investigates the catalyst structural and chemical changes occurring during such harsh treatments. Three series of supported V2O5-WO3/TiO2 catalysts were prepared by incipient-wetness impregnation of aqueous ammonium metavanadate and metatungstate precursors. The catalysts were subsequently dried and calcined at 550oC in O2, 650oC in O2, and hydrothermal conditions (10% O2, 8% H2O, 7% CO2 and 75% N2) at 650oC. The resulting catalysts were physically characterized by numerous techniques (in situ Raman, in situ IR, in situ High Field-High Spinning solid-state 51V MAS NMR, in situ EPR, XRD, BET surface area and ICP) and chemically probed with adsorbed ammonia, SCR-TPSR, and the SCR reaction. The surface WOx sites on the TiO2 support behave as a textural promoter that stabilizes the TiO2 (anatase) phase from sintering and transforming to the undesirable crystalline TiO2 (rutile) phase that can lead to formation of a Ti1-xVxO2 (rutile) solid solution with reduced V4+ cations (~7-15%). The surface VOx sites are mostly oligomerized as surface V+5Ox sites (~50-85% oligomers) and the extent of oligomerization tends to increase with surface WOx coverage and calcination temperature. A major difference between the calcined and hydrothermally treated catalysts was the low concentration of surface NH3* species on Lewis acid sites for the hydrothermally treated catalysts, yet the SCR activity was almost comparable for both catalysts. This finding suggests that surface NH4+*, primarily associated with the surface VOx sites, are able to efficiently perform the SCR reaction. Given that multiple catalyst parameters were simultaneously varying during these treatments, it was difficult to correlate the SCR activity with any single catalyst parameter. A correlation, however, was found between the SCR TOF/activity and the sum of the surface NH3* and NH4+* species, which is dominated by the surface NH4+* species.

SCR, NO, NH3, catalyst, V2O5, WO3, TiO2, promotion↗
DOE OSTI2026

Modulating Mid-Gap Electronic States Through Site-Selective Modification in B-Pbx/B'-CuyV2O5/CdS Heterostructures for Photocatalytic Hydrogen Evolution

We interfaced ..beta..-Pbx/..beta..'-CuyV2O5 compounds, with varying stoichiometries of precisely positioned Pb-ions (x) and Cu-ions (y) in interstitial sites along a tunnel-structured ?-V2O5 framework, with cysteine-capped CdS (cysCdS) quantum dots (QDs) to yield heterostructured photocatalysts. ..beta..-Pbx/..beta..'-CuyV2O5 compounds exhibit midgap electronic states with orbital contributions from both Cu 3d and stereochemically active Pb 6s states that show distinctive light-initiated reactivity with photoexcited QDs. ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures were prepared by linker-assisted assembly (LAA). Scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Raman spectroscopy revealed that cysCdS QDs were deposited onto surfaces of ..beta..-Pbx/..beta..'-CuyV2O5 via LAA. HAXPES revealed that the site-selective positioning of Pb-ions and Cu-ions promoted close energetic alignment of the midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds with the valence-band maximum of cysCdS QDs. Transient absorption spectroscopy revealed that photogenerated holes were transferred from CdS QDs to midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds on time scales <50 ps. Finally, photoelectrochemical and photochemical experiments revealed that ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures promoted the photocatalytic reduction of H+ to H2. In photoelectrochemical experiments, under oxidative conditions, for all ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, H2 was evolved at a Pt counter electrode while a sacrificial donor was oxidized at the heterostructure-functionalized working electrode. In contrast, under reductive conditions, for ..beta..-Pb0.152V2O5/CdS and ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, H2 was evolved at the working electrode. In photochemical experiments, dispersed ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures promoted the reduction of H+ to H2 under white-light illumination; ..beta..'-Cu0.55V2O5/CdS and ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, for which midgap states have Cu 3d orbital character, generated 2-fold more H2 than ..beta..-Pb0.152V2O5/CdS heterostructures. Cu-ion insertion thus appends additional acceptor surface states that improve ligand-mediated hole transfer from photoexcited QDs, but such states are intrinsically limited in mediating hole transport to the substrate as a result of the low mobility of holes in narrow Cu 3d-states. Our results reveal that the density and orbital character of midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds, tunable through recently developed site-selective ion insertion strategies, determine efficiencies of charge-transfer and charge-transport mechanisms that underpin photocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrochemical Phase Engineering of γ′-V 2 O 5 Thin Films for Sodium-Ion Storage Electrodes

V 2 O 5 is a promising sodium-ion cathode material due to its high theoretical capacity (147 mAh/g) and working voltage (3.3 V vs Na/Na + ). Among its various crystal phases, γ′-V 2 O 5 has a large interlayer spacing, ensuring the reversible insertion–extraction of sodium ions. However, current synthesis methods for γ′-V2O5 require high temperatures (>600 °C) and toxic chemicals (NO 2 BF 4 ), which make the preparation demanding. Herein, we put forward an electrochemical phase engineering method combining thermal annealing and electrochemistry to easily prepare thin-film γ′-V 2 O 5 . Electrochemical characterization shows near-ideal performance as a thin-film cathode material for sodium-ion batteries. It shows a measured initial capacity of 152 mAh/g, a high working voltage (3.3 V vs Na + /Na), and an exceptional Coulombic efficiency of 98%, significantly surpassing previously reported values (∼50% CE). Cyclic voltammogram and galvanostatic capacity curves confirm the sodium insertion–deinsertion, which remains stable at 2 C. The γ′-V 2 O 5 thin film has electrochemical performance similar to γ′-V 2 O 5 powder, indicating another workable morphology of γ′-V 2 O 5 for sodium-ion batteries.

batteries↗