Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “URANIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Assessing the Renal Toxicity of Capstone Depleted Uranium Oxides and Other Uranium Compounds

The primary target for uranium toxicity is the kidney. The most frequently used guideline for uranium kidney burdens is the International Commission on Radiation Protection (ICRP) value of 3 µg U/g kidney, a value that is based largely upon chronic studies in animals. In the present effort, we have developed a risk model equation to assess potential outcomes of acute uranium exposure. Twenty-seven previously published case studies in which workers were acutely exposed to soluble compounds of uranium (as a result of workplace accidents) were analyzed. Kidney burdens of uranium for these individuals were determined based on uranium in the urine, and correlated with health effects observed over a period of up to 38 years. Based upon the severity of health effects, each individual was assigned a score (- to +++) and then placed into an Effect Group. A discriminant analysis was used to build a model equation to predict the Effect Group based on the amount of uranium in the kidneys. The model equation was able to predict the Effect Group with 85% accuracy. The risk model was used to predict the Effect Group for Soldiers exposed to DU as a result of friendly fire incidents during the 1991 Gulf War. This model equation can also be used to predict the Effect Group of new cases in which acute exposures to uranium have occurred.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterizing the Chemical Behavior of Uranium Compounds for Nuclear Forensics

Better characterization of uranium compounds related to the nuclear fuel cycle is a key goal of the nuclear forensics community. Understanding the chemical behavior of these compounds in various environmental conditions and the effect on observable properties is crucial to the identification of unknown materials. Uranyl fluoride, the hydrolysis product of uranium hexafluoride, is a material of particular interest. Previous studies have suggested that uranyl fluoride may degrade upon exposure to high humidity, but the chemical pathway of degradation was previously not well understood. Our work demonstrates that uranyl fluoride undergoes a chemical reaction with water vapor to form uranyl hydroxide and peroxide species. This understanding will help guide forensic analysis in the future.

Kirkegaard, Marie↗

Isotopic spectroscopy of uranium atomic beams produced by thermal reduction of uranium compounds

We present a method for producing atomic beams of uranium from molecular uranium precursors in a micro-crucible. In previous work, we have shown that uranium in an atomic beam can be analyzed for isotopic abundances down to enrichment levels of 0.7%. Here in this paper, we show that the same method can be utilized to analyze samples of any of the most common uranium-containing compounds to obtain the same quality of analytical results. This technique relies only on the addition of a metal species capable of reducing the uranium compound of interest. This work presents a brief discussion of the necessary criteria for thermal reduction, development and proof-of-principle of the technique using Er 2 O 3 as a non-radioactive surrogate material, and application to samples of the uranium compounds UO 2 , U 3 O 8 , UO 2 (NO 3 ) 2 , UO 2 F 2 , and UF 4 , to obtain isotope-resolved absorption spectra from an atomic beam produced from these molecular precursors.

Bartlett, Joshua H.↗

Raman investigation of the uranium compounds U 3 O 8 , UF 4 , UH 3 and UO 3 under pressure at room temperature

Our current state-of-the-art X-ray diffraction experiments are primarily sensitive to the position of the uranium atom. While the uranium - low-Z element bond (such as U-H or U-F) changes under pressure and temperature the X-ray diffraction investigations do not reveal information about the bonding or the stoichiometry. Questions that can be answered by Raman spectroscopy are (i) whether the bonding strength changes under pressure, as observed by either blue- or red-shifted peaks of the Raman active bands in the spectrum and (ii) whether the low-Z element will eventually be liberated and leave the host lattice, i.e. do the fluorine, oxygen, or hydrogen atoms form dimers after breaking the bond to the uranium atom. Therefore Raman spectra were also collected in the range where those decomposition products would appear. Raman is particularly well suited to these types of investigations due to its sensitivity to trace amounts of materials. One challenge for Raman investigations of the uranium compounds is that they are opaque to visible light. They absorb the incoming radiation and quickly heat up to the point of decomposition. This has been dealt with in the past by keeping the incoming laser power to very low levels on the tens of milliWatt range consequently affecting signal to noise. Recent modern investigations also used very small laser spot sizes (micrometer range) but ran again into the problem of heating and chemical sensitivity to the environment. In the studies presented here (in contrast to all other studies that were performed at ambient conditions only) we employ micro-Raman spectroscopy of samples situated in a diamond anvil cell. This increases the trustworthiness of the obtained data in several key-aspects: (a) We surrounded the samples in the DAC with neon as a pressure transmitting medium, a noble gas that is absolutely chemically inert. (b) Through the medium the sample is thermally heat sunk to the diamond anvils, diamond of course possessing the very best heat conductivity of any material. Therefore local heating and decomposition are avoided, a big challenge with other approaches casting doubts on their results. (c) This in turn benefits the signal/noise ratio tremendously since the Raman features of uranium-compounds are very small. The placement of the samples in DACs allows for higher laser powers to impinge on the sample spot while keeping the spot-size larger than in previous studies and keep the samples from heating up. Raman spectroscopy is a very sensitive non-invasive technique and we will show that it is even possible to distinguish the materials by their origin / manufacturer as we have studied samples from Cameco (Canada) and IBI-Labs (US-Florida) and can compare with ambient literature data for samples from Strem (US-MA) and Areva (Pierrelatte, France).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Water Solubility of Plutonium and Uranium Compounds and Residues at TA-55

Understanding the water solubility of plutonium and uranium compounds and residues at TA-55 is necessary to provide a technical basis for appropriate criticality safety, safety basis and accountability controls. Individual compound solubility was determined using published solubility data and solution thermodynamic modeling. Residue solubility was estimated using a combination of published technical reports and process knowledge of constituent compounds. The scope of materials considered includes all compounds and residues at TA-55 as of March 2016 that contain Pu-239 or U-235 where any single item in the facility has more than 500 g of nuclear material. This analysis indicates that the following materials are not appreciably soluble in water: plutonium dioxide (IDC=C21), plutonium phosphate (IDC=C66), plutonium tetrafluoride (IDC=C80), plutonium filter residue (IDC=R26), plutonium hydroxide precipitate (IDC=R41), plutonium DOR salt (IDC=R42), plutonium incinerator ash (IDC=R47), uranium carbide (IDC=C13), uranium dioxide (IDC=C21), U 3 O 8 (IDC=C88), and uranium filter residue (IDC=R26). This analysis also indicates that the following materials are soluble in water: plutonium chloride (IDC=C19) and uranium nitrate (IDC=C52). Equilibrium calculations suggest that PuOCl is water soluble under certain conditions, but some plutonium processing reports indicate that it is insoluble when present in electrorefining residues (R65). Plutonium molten salt extraction residues (IDC=R83) contain significant quantities of PuCl 3 , and are expected to be soluble in water. The solubility of the following plutonium residues is indeterminate due to conflicting reports, insufficient process knowledge or process-dependent composition: calcium salt (IDC=R09), electrorefining salt (IDC=R65), salt (IDC=R71), silica (IDC=R73) and sweepings/screenings (IDC=R78). Solution thermodynamic modeling also indicates that fire suppression water buffered with a commercially-available phosphate buffer would significantly reduce the solubility of PuCl 3 by the precipitation of PuPO 4 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measurement of the Auger parameter and Wagner plot for uranium compounds

In this study, the photoemission from the U 4f{sub 7/2} and 4d{sub 5/2} states and the U N{sub 6}O{sub 45}O{sub 45} and N{sub 67}O{sub 45}V x-ray excited Auger transitions were measured for a range of uranium compounds. The data are presented in Wagner plots and the Auger parameter is calculated to determine the utility of this technique in the analysis of uranium materials. It was demonstrated that the equal core-level shift assumption holds for uranium. It was therefore possible to quantify the relative relaxation energies, and uranium was found to have localized core-hole shielding. The position of compounds within the Wagner plot made it possible to infer information on bonding character and local electron density. The relative ionicity of the uranium compounds studied follows the trend UF{sub 4} > UO{sub 3} > U{sub 3}O{sub 8} > U{sub 4}O{sub 9}/U{sub 3}O{sub 7} Almost-Equal-To UO{sub 2} > URu{sub 2}Si{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nano-scale mechanical behavior of uranium silicide compounds

Uranium silicide compounds exhibit a range of attractive material properties for nuclear fuel applications, but little is known regarding their mechanical behavior. The structure of nuclear fuels at high burnup can prove to be especially difficult given the significant changes in both chemistry and microstructure caused by fission products. Nano-indentation appears to be a valuable addition to post irradiation examination. The present focus is assessment of the room temperature modulus and hardness of U{sub 3}Si{sub 2}, U{sub 3}Si{sub 5} and USi materials. Each of the compositions under investigation was synthesized via arc melting of the pure metals in an Ar atmosphere using a titanium getter to remove O{sub 2} contamination. The resulting pellets following milling and sintering of the arc melted material were between 96 and 98% of density. Coupling different techniques (SEM and Chemical Analysis), microstructural investigations of the samples has been performed. Preliminary nano-mechanical response of U-Si fuel materials has been demonstrated, on a Hysitron Tribo-indenter which will impact the ability to design advanced fuel materials for enhanced high temperature performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fixed-Angle Reflectance from Uranium Compounds and U-Bearing Minerals: Experimental Challenges to Determine the Optical Constants n and k

Fixed-angle reflectance spectroscopy using a commercial Fourier transform infrared (FTIR) spectrometer was employed to derive the optical constants n and k of several uranium compounds. This technique relies upon measurement of the quantitative reflectance R(?) spectra from a polished surface across a broad spectral range (in this case, the mid- and far-IR covering ca. 7500 to 50 cm-1) followed by application of the Kramers-Kronig transformation (KKT). Near-normal fixed-angle measurements as used in this technique require continuous reflectance spectra to as low a wavenumber value as possible. Here, we discuss some of the many challenges in measuring the far-IR and very far-IR (terahertz) spectra using an interferometric instrument, particularly those stemming from small sample sizes, typically just millimeters on a face for crystalline samples, as well as limitations due to optical components and diffraction. We apply this method to single-crystal UO2 and its mineralogical form uraninite, as well as other U-bearing minerals such as autunite [Ca(UO2)2(PO4)2·8-12H2O] and the dehydrated form of autunite, meta-autunite. In addition to the specular reflectance spectra, x-ray diffractometry was used as a confirmatory technique to analyze the surface composition of the species. Deriving the infrared optical constants for such U-bearing species (as well as other solids) will enable nondestructive detection under a variety of environmental and compositional conditions.

Uranium Minerals, infrared spectroscopy, optical c↗

Preparation of uranium compounds

UI.sub.3(1,4-dioxane).sub.1.5 and UI.sub.4(1,4-dioxane).sub.2, were synthesized in high yield by reacting turnings of elemental uranium with iodine dissolved in 1,4-dioxane under mild conditions. These molecular compounds of uranium are thermally stable and excellent precursor materials for synthesizing other molecular compounds of uranium including alkoxide, amide, organometallic, and halide compounds.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Interplay between London Dispersion, Hubbard U , and Metastable States for Uranium Compounds

High-throughput computational studies of lanthanide and actinide chemistry with density-functional theory are complicated by the need for Hubbard U corrections, which ensure localization of the f-electrons, but can lead to metastable states. This work presents a systematic investigation of the effects of both Hubbard U value and metastable states on the predicted structural and thermodynamic properties of four uranium compounds central to the field of nuclear fuels: UC, UN, UO 2 , and UCl 3 . We also assess the impact of the exchange-hole dipole moment (XDM) dispersion correction on the computed properties. Overall, the choice of Hubbard U value and inclusion of a dispersion correction cause larger variations in the computed geometric properties than result from metastable states. Further, the weak dependence of structure optimization on metastable states should simplify future high-throughput calculations on actinides. Conversely, addition of the dispersion correction is found to offset the repulsion introduced by the Hubbard U term and provides greatly improved agreement with experiment for both cell volumes and heats of formation. The XDM dispersion correction is largely invariant to the chosen U value, making it a robust dispersion correction for actinide systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Use of an ion mobility spectrometer for detecting uranium compounds

The safeguards community currently lacks a method to rapidly determine the chemical form of radioactive and non-radioactive compounds in real time during inspection activities. Chemical speciation identification can provide important information on both the types of materials that are collected during environmental sampling and can inform inspectors as to where to focus efforts during inspections or complementary access visits. Ion Mobility Spectrometry (IMS) is an established field technique for the detection of explosives, narcotics, and other organic compounds. More recently, electrospray ionization (ESI) has been used to introduce inorganic compounds to IMS instruments for analysis. These techniques have shown the ability to supply chemical information about the compounds being analyzed. Although these laboratory based instruments use a liquid-based injection system, there is evidence in the literature of unaltered and intact pharmaceutical tablets being volatilized and ionized in open atmosphere using heat and a Ni-63 source. Lastly, this work determined that a commercial-off-the-shelf (COTS) IMS could be used for the identification of solid uranium compounds directly after sampling using a COTS sample swipe.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The apparent absence of chemical sensitivity in the 4d and 5d X-ray absorption spectroscopy of uranium compounds

X-ray absorption spectroscopy (XAS) and related derivative measurements have been used to demonstrate that the Pu 5f states are strongly relativistic and have a 5f occupation number near 5. Owing to the success in this regime, it has been argued that the XAS measurements should be a powerful tool to probe 5f occupation variation, both as a function of elemental nature (actinide atomic number) and as a function of physical and chemical perturbation, e.g., oxidation state. We show that XAS and its related measurements fail in this latter aspect for a wide variety of uranium compounds and materials. Possible causes will be discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Orbital Hybridization in Uranium Compounds and its Influence on Electronic Properties

Computational analysis and modeling of spectroscopic properties of trivalent uranium in crystals of hexagonal symmetry have been conducted with inclusion of the crystal-field induced orbital hybridization between the 5f{sup 3} and 5f{sup 2}6d configurations. It is shown that, in the absorption spectrum with energy above 20,000 cm{sup -1}, the mixing of 5f{sup 3} and 5f{sup 2}6d states is significant. The spectrum in this region cannot be interpreted by the conventional model of crystal field theory. The Judd-Ofelt theory fails completely in predicating the intensities of optical absorption from the ground state to the configuration mixed excited states. A new Hamiltonian including the odd ranks of crystal field interaction is diagonalized on the bases of all 5f{sup 3} and 5f{sup 2}6d states. A simulation of absorption spectrum is optimized in comparison with the experimental spectrum for determination of the Hamiltonian parameters. (authors)

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Resonant x-ray emission across the L 3 edge of uranium compounds

A narrow bandwidth x-ray beamline and a multi-crystal von Hamos spectrometer were used to record x-ray absorption and x-ray emission (XES) across the uranium L 3 edge of UO 2 , UO 3 , Cs 2 UO 2 Cl 4 , and Cs 2 UCl 6 . Measurements were made over 17150–17250 eV with an instrumental resolution of ∼2 eV. This resolution allowed the use of Lorentzian peak fits to the L 3 N 4 and L 3 N 5 characteristic x-ray fluorescence lines that have ∼12–13 eV lifetime widths. The fluorescence yields of the four compounds display strong white lines near threshold and multiple scattering features at higher energies. The XES spectra were fit with three Lorentzians, two for the L 3 N 4 and L 3 N 5 lines and one for inelastic scattering by 2p–6d excitations and 4d–6d final states. The intensities of the white lines were largely due to the inelastic scattering component. To support the measurements, relativistic equation-of-motion coupled-cluster and restricted active space configuration interaction calculations were performed for uranium core-excitation energies in Cs 2 UO 2 Cl 4 and Cs 2 UCl 6 . These calculations with rigorous treatments of relativistic effects are shown to provide accurate uranium L 3 -edge binding energies, L 3 N 5 emission energies, as well as the energy losses in the inelastic scattering process. The measured and calculated results show variations between compounds with U(IV) oxidation states that contain 6d 0 5f 2 electrons in their ground configurations (UO 2 and Cs 2 UCl 6 ) compared with U(VI) compounds (UO 3 and Cs 2 UO 2 Cl 4 ) with empty 5f and 6d configurations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Probing U 5f Covalency in Uranium Compounds through Oxidant 2p Bonding

Oxidant K (1s) X-ray Emission Spectroscopy (XES) was used to investigate covalency in the Oxidant 2p – Uranium 5f bonds of Uranium Dioxide (UO 2 ) and Uranium Tetrafluoride (UF 4 ). It will be shown that the width of the 2p Occupied Density of States (ODOS), determined from the XES measurements, correlates with the increased 5f covalency of UO 2 and the increased ionicity of UF 4 . Analysis of the XES results includes comparison to spectral simulations, cluster calculations and peak fitting, demonstrating the potential of the oxidant XES measurements as a probe of 5f covalency.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗