Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “URANIUM 240”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A = 240

Evaluated experimental data for radioactive decays and reactions for known nuclides (U, Np, Pu, Am, Cm, Bk, Cf) of A = 240 are presented together with adopted values for level energies, {gamma}-ray energies, relative branching ratios and other nuclear properties. This revision was primarily motivated by the need for re-evaluation of absolute gamma-ray intensities from the {epsilon} decay of {sup 240}Am to {sup 240}Pu. These quantities are essential for determining precise and accurate cross-sections for the {sup 241}Am(n,2n){sup 240}Am reaction using fast neutrons (see e.g. Americium Workshop, Santa Fe, New Mexico, September 2007, 2008To06, 2007Ta01, 2006Pe14) and {sup 241}Am({gamma},n) reaction (see e.g. 2006Ri08). For {sup 240}U, the {gamma}-ray data have now become available. The data sets for {sup 244}Pu {alpha} decay to {sup 240}U; {sup 244}Cm {alpha} decay to {sup 240}Pu and {sup 244}Cf {alpha} decay to {sup 240}Cm have been adapted from evaluations by 1998Ak04 and 2003Ak04. For {sup 244}Cm decay, evaluation by 2006BeZL under the Decay Data Evaluation Project (DDEP) is also used. The {gamma}-ray data (energies and intensities) for {sup 240}Cm decay are not considered (by the evaluators) as well established. Most detailed data are available only for {sup 240}Pu. Extensive data in the second potential well are available for this nuclide together with fission isomers and several superdeformed (SD) structures. For other nuclides spectroscopic data are rather sparse in the literature; especially for the following radioactive decays: The {epsilon} decays of {sup 240}Cf, {sup 240}Bk and {sup 240}Cm; multipolarities of {gamma}-ray transitions in {sup 240}Np from {sup 240}U {beta}{sup -} decay; {gamma}-ray transitions from {sup 244}Cf {alpha} decay and %{epsilon} branch of {sup 244}Cf decay; spins and parities of excited states in {sup 240}U and multipolarities of associated {gamma}-ray transitions in {sup 240}U. This work supersedes earlier full evaluations of A = 240 published by 2004Ch64, 1984Sh34, 1977Sc13, 1970Sc39; and an evaluation published in update mode by 1990Sh04.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Isospin effects on light charged particles as probes of nuclear dissipation

The multiplicities of postsaddle protons and {alpha} particles of the heavy systems {sup 234}Cf, {sup 240}Cf, {sup 246}Cf, and {sup 240}U as functions of the postsaddle dissipation strength are calculated in the framework of a dynamical Langevin model coupled with a statistical decay model. It is found that with increasing isospin of the Cf system, the sensitivity of the postsaddle proton and {alpha}-particle multiplicity to the dissipation strength decreases substantially, and it disappears for the {sup 240}U system. We suggest that on the experimental side, to accurately probe the postsaddle dissipation strength by measuring the prescission proton and {alpha}-particle multiplicity, it is best to populate heavy compound systems with low isospin.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Isospin effects on neutrons as a probe of nuclear dissipation

Based on a dynamical Langevin equation coupled with a statistical decay model, we calculate the excess of the precision neutron multiplicity of the heavy nuclei {sup 240}Cf, {sup 246}Cf, {sup 252}Cf, and {sup 240}U over that predicted by the standard statistical model as a function of the postsaddle dissipation strength. We find that with increasing isospin of the system, the sensitivity of the excess to the dissipation strength decreases substantially. Moreover, for {sup 240}U, this excess is no longer sensitive to the nuclear dissipation. These results suggest that, on the experimental side, to accurately obtain information of the postsaddle dissipation strength by measuring the neutron multiplicity evaporated during the fission process of heavy nuclei, it is best to populate those compound systems with low isospin.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

In the Lab with Nuclear Scientists: Critical and Subcritical Assemblies

This presentation talks on the Critical experiments performed on the NCERC machines. Plutonium ( 239 Pu and 240 Pu), Highly Enriched Uranium, Low-Temperature (-40°C). This is all based on a simple design useful for modeling and validation. The design is made to incorporate materials of interest such as Tantalum, hafnium, lithium & more.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Second Look at Neutron Resonance Transmission Analysis as a Spent Fuel NDA Technique

Many different nondestructive analysis techniques are currently being investigated as a part of the United States Department of Energy's Next Generation Safeguards Initiative (NGSI) seeking methods to quantify plutonium in spent fuel. Neutron Resonance Transmission Analysis (NRTA) is one of these techniques. Having first been explored in the mid-1970s for the analysis of individual spent-fuel pins a second look, using advanced simulation and modeling methods, is now underway to investigate the suitability of the NRTA technique for assaying complete spent nuclear fuel assemblies. The technique is similar to neutron time-of-flight methods used for cross-section determinations but operates over only the narrow 0.1-20 eV range where strong, distinguishable resonances exist for both the plutonium (239, 240, 241,242Pu) and uranium (235,236,238U) isotopes of interest in spent fuel. Additionally, in this energy range resonances exists for six important fission products (99Tc, 103Rh, 131Xe, 133Cs, 145Nd, and 152Sm) which provide additional information to support spent fuel plutonium assay determinations. Initial modeling shows excellent agreement with previously published experimental data for measurements of individual spent-fuel pins where plutonium assays were demonstrated to have a precision of 2-4%. Within the simulation and modeling analyses of this project scoping studies have explored fourteen different aspects of the technique including the neutron source, drift tube configurations, and gross neutron transmission as well as the impacts of fuel burn up, cooling time, and fission-product interferences. These results show that NRTA may be a very capable experimental technique for spent-fuel assay measurements. The results suggest sufficient transmission strength and signal differentiability is possible for assays through up to 8 pins. For an 8-pin assay (looking at an assembly diagonally), 64% of the pins in a typical 17 ? 17 array of a pressurized water reactor fuel assembly can be part of a complete transmission assay measurement with high precision. Analysis of rows with up to 12 pins may also be feasible but with diminished precision. Preliminary data analysis of an NRTA simulation has demonstrated the simplicity of the technique.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Neutron Resonance Transmission Analysis (NRTA): Initial Studies of a Method for Assaying Plutonium in Spent Fuel

Neutron Resonance Transmission Analysis (NRTA) is an analytical technique that uses neutrons to assay the isotopic content of bulk materials. The technique uses a pulsed accelerator to produce an intense, short pulse of neutrons in a time-of-flight configuration. These neutrons, traveling at different speeds according to their energy, can be used to interrogate a spent fuel (SF) assembly to determine its plutonium content. Neutron transmission through the assembly is monitored as a function of neutron energy (time after the pulse), similar to the way neutron cross-section data is often collected. The transmitted neutron intensity is recorded as a function of time, with faster (higher-energy) neutrons arriving first and slower (lower-energy) neutrons arriving later. The low-energy elastic scattering and absorption resonances of plutonium and other isotopes modulate the transmitted neutron spectrum. Plutonium content in SF can be determined by analyzing this attenuation. Work is currently underway at Idaho National Laboratory, as a part of United States Department of Energy's Next Generation Safeguards Initiative (NGSI), to investigate the NRTA technique and to assess its feasibility for quantifying the plutonium content in SF and for determining the diversion of SF pins from assemblies. Preliminary results indicate that NRTA has great potential for being able to assay intact SF assemblies. Operating in the 1-40 eV range, it can identify four plutonium isotopes (239, 240, 241, & 242Pu), three uranium isotopes (235, 236, & 238U), and six resonant fission products (99Tc, 103Rh, 131Xe, 133Cs, 145Nd, and 152Sm). It can determine the areal density or mass of these isotopes in single- or multiple-pin integral transmission scans. Further, multiple observables exist to allow the detection of material diversion (pin defects) including fast-neutron and x-ray radiography, gross-transmission neutron counting, plutonium resonance absorption analysis, and fission-product resonance absorption analysis. Initial benchmark modeling has shown excellent agreement with previously published experimental data for measurements of individual SF pins where plutonium assays were experimentally demonstrated to have a precision of better than 3%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Assessing the Feasibility of Using Neutron Resonance Transmission Analysis (NRTA) for Assaying Plutonium in Spent Fuel Assemblies

Neutron resonance transmission analysis (NRTA) is an active-interrogation nondestructive assay (NDA) technique capable of assaying spent nuclear fuel to determine plutonium content. Prior experimental work has definitively shown the technique capable of assaying plutonium isotope composition in spent-fuel pins to a precision of approximately 3%, with a spatial resolution of a few millimeters. As a Grand Challenge to investigate NDA options for assaying spent fuel assemblies (SFAs) in the commercial fuel cycle, Idaho National Laboratory has explored the feasibility of using NRTA to assay plutonium in a whole SFA. The goal is to achieve a Pu assay precision of 1%. The NRTA technique uses low-energy neutrons from 0.1-40 eV, at the bottom end of the actinide-resonance range, in a time-of-flight arrangement. Isotopic composition is determined by relating absorption of the incident neutrons to the macroscopic cross-section of the actinides of interest in the material, and then using this information to determine the areal density of the isotopes in the SFA. The neutrons used for NRTA are produced using a pulsed, accelerator-based neutron source. Distinguishable resonances exist for both the plutonium (239,240,241,242Pu) and uranium (235,236,238U) isotopes of interest in spent fuel. Additionally, in this energy range resonances exists for six important fission products (99Tc, 103Rh, 131Xe, 133Cs, 145Nd, and 152Sm) which provide additional information to support spent fuel plutonium assay determinations. Based on extensive modeling of the problem using Monte Carlo-based simulation codes, our preliminary results suggest that by rotating an SFA to acquire four symmetric views, sufficient neutron transmission can be achieved to assay a SFA. In this approach multiple scan information for the same pins may also be unfolded to potentially allow the determination of plutonium for sub-regions of the assembly. For a 17 ? 17 pressurized water reactor SFA, a simplistic preliminary analysis indicates the mass of 239Pu may be determined with a precision on the order of 5%, without the need for operator-supplied fuel information or operational histories. This paper will present our work to date on this topic, indicate our preliminary findings for a conceptual assay approach, discuss resilience against spoofing, and outline our future plans for evaluating the NRTA technique for SFA plutonium determination.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Pyroelectric materials as electronic pulse detectors of ultraheavy nuclei

The design and testing of ultraheavy-nucleus pulse detectors based on pyroelectric materials are reported, extending the preliminary findings of Tuzzolino (1983) and Simpson and Tuzzolino (1983). Uranium-ion beams of about 240 MeV/u are detected by a 39.5-micron-thick Si detector, degraded to about 175 MeV/u by Al absorbers, and then strike 700-micron-thick polyvinylidene fluoride or 1000-micron-thick LiTaO3 pyroelectric samples. Both detector systems are connected to a coincidence circuit via charge-sensitive preamplifiers, shaping amplifiers with 30-microsec effective time constants, and electronic discriminators. Sample spectra are shown, and the pulse heights measured are found to agree with theoretical calculations to within a factor of about 2. The response of the pyroelectric materials is found to be unaffected by exposure to about 10 Mrad of 2-7-MeV/u heavy ion radiation. With further study and improvement of the detection sensitivity, devices of this type could be applied to large-area space measurements of low ultraheavy-ion fluxes.

Simpson, J. A.↗

The efficacy of denaturing actinide elements as a means of decreasing materials attractiveness

This study considers the concept of denaturing as applied to the actinide elements present in spent fuel as a means to reduce materials attractiveness. Highly attractive materials generally have low values of bare critical mass, heat content, and dose. To denature an attractive element, its spent-fuel isotopic composition (isotopic vector) is intentionally modified by introducing sufficient quantities of a significantly less attractive isotope to dilute the concentration of a highly attractive isotope so that the overall attractiveness of the element is reduced. The authors used FOM (Figure of Merit) formula as the material attractiveness metric for their parametric determination of the attractiveness of the Pu and U. Materials attractiveness needs to be considered in three distinct phases in the process to construct a nuclear explosive device (NED): the acquisition phase, processing phase, and utilization phase. The results show that denaturing uranium with {sup 238}U is actually an effective means of reducing the attractiveness. For uranium with a large minority of {sup 235}U, a mixture of 80% {sup 238}U to 20% {sup 235}U is required to reduce the attractiveness to low. For uranium with a large concentration of {sup 233}U, a mixture of 88% {sup 238}U to 12% {sup 233}U is required to reduce the attractiveness to low. The results also show that denaturing plutonium with {sup 238}Pu is less effective than denaturing uranium with {sup 238}U. Using {sup 238}Pu as the denaturing agent would require 80% or more by mass in order to reduce the attractiveness to low. No amount of {sup 240}Pu is enough to reduce the plutonium attractiveness below medium. The combination of {sup 238}Pu and {sup 240}Pu would require approximately 70% {sup 238}Pu and 25% {sup 240}Pu by mass to reduce the plutonium attractiveness to low.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TREND code for reconstruction of neutron reaction cross sections and calculation of the Doppler broadening in the region of resolved resonances

The TREND code is developed for reconstruction of neutron cross sections in the region of resolved resonances from the data of the international evaluated nuclear data libraries using the Reich-Moore, Adler-Adler, and Breit-Wigner formalisms and for calculation of the Doppler broadening of the resulting cross sections within the classical approximation. The TREND code is incorporated into the MCU code package for Monte Carlo reactor calculations. The TREND and MCU codes have been used to evaluate the data of the ROSFOND data bank on uranium and plutonium isotopes in comparison with the data of the ICSBEP data bank.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

CHARACTERIZATION OF MODIFIED MONOSODIUM TITANATE - AN IMPROVED SORBENT FOR STRONTIUM AND ACTINIDE SEPARATIONS

High-level nuclear waste produced from fuel reprocessing operations at the Savannah River Site (SRS) requires pretreatment to remove {sup 134,137}Cs, {sup 90}Sr, and alpha-emitting radionuclides (i.e., actinides) prior to disposal onsite as low level waste. An inorganic sorbent, monosodium titanate (MST), is currently used to remove {sup 90}Sr and alpha-emitting radionuclides, while a caustic-side solvent extraction process is used for removing {sup 134,137}Cs. A new peroxotitanate material, modified MST, or mMST, has recently been developed and has shown increased removal kinetics and capacity for {sup 90}Sr and alpha-emitting radionuclides compared to the current baseline material, MST. This paper describes recent results focused on further characterization of this material.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Technical Review Report for the Model 9977 Safety Analysis Report for Packaging Addendum 1 Justification for DNDO Contents

The Model 9977 Package is currently certified for Content Envelope C.1, {sup 238}Pu Heat Sources, either in Radioisotope Thermoelectric Generator (RTG), or in Food-Pack Can configurations, under Certificate of Compliance (CoC) Certificate Number 9977 and Package Identification Number USA/9977/B(M)F-96 (DOE). Addendum 1, Justification for DNDO Contents,--the Submittal--supplements Revision 2 of the Safety Analysis Report for Packaging for the Model 9977 Package. The Submittal adds five new contents to the Model 9977 Package, Content Envelopes, AC.1 through AC.5. The Content Envelopes are neptunium metal, the beryllium-reflected plutonium ball (BeRP Ball), plutonium/uranium metal, plutonium/uranium metal with enhanced wt% {sup 240}Pu (to 50 wt%), and uranium metal. The last three Content Envelopes are stabilized to DOE-STD-3013. These Content Envelopes will be shipped to the Device Assembly Facility (DAF) at the Nevada Test Site (NTS), where they will reside, and, hence, to off-site locations in support of the Department of Homeland Security (DHS) Domestic Nuclear Detection Office (DNDO). The new certificate will apply to a limited number of Model 9977 Packages. At the same time, the Submittal requests an extension of the periodic maintenance requirements from one (1) year to up to five (5) years using Radio-Frequency Identification (RFID) temperature-monitoring systems to measure the ambient storage temperature in order to ensure that the temperature of the Viton{reg_sign} O-rings for the 6-inch Containment Vessel (6CV) remain less than 200 F. The RFIDs have been developed by Argonne National Laboratory. An on-going surveillance program at the K-Area Materials Storage (KAMS) facility at the Savannah River Site, and an on-going examination of Viton{reg_sign} O-rings from mock Primary Containment Vessels (PCVs) at Savannah River National Laboratory (SRNL) provide the technical justification for the extension of the periodic maintenance interval. Where extended periodic maintenance is desired, the decay heat rate for the Model 9977 Package is limited to 15 watts.

99 GENERAL AND MISCELLANEOUS↗

Annual Report on the Activities and Publications of the DHS-DNDO-NTNFC Sponsored Post-doctoral Fellow at Los Alamos National Laboratory

This report is a summary of the projects Jung Rim is working on as a DHS postdoctoral fellow at Los Alamos National Laboratory. These research projects are designed to explore different radioanalytical methods to support nuclear forensics applications. The current projects discussed here include development of alpha spectroscopy method for 240/239 Pu Isotopic ratio measurement, non-destructive uranium assay method using gamma spectroscopy, and 236 U non-destructive uranium analysis using FRAM code. This report documents the work that has been performed since the start of the postdoctoral appointment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MC{sup 2}-3/DIF3D Analysis of the ZPPR-15 Axial Expansion Experiments

The Zero Power Physics Reactor (ZPPR) fast critical facility at the Argonne National Laboratory-West (ANLW) site in Idaho was built in 1969 to obtain neutron physics information necessary for the design of fast breeder reactors. The ZPPR-15 phases A through D were part of a series of cores intended to model a 330 MWt Integral Fast Reactor (IFR) concept. The ZPPR-15 assembly consisted of an inner core zone, an outer core zone of higher fissile content, a thin radial blanket and a thick steel reflector. The inner and outer core zones were of approximately equal volumes. The core zones simulated a sodium-cooled, metal-fueled fast reactor with approximately 10 wt.% zirconium in the target fuel composition. Phases A and B simulated an equilibrium cycle UPu-Zr fuel core where plutonium created in the blankets was sufficient to negate the need for enriched {sup 235}U feedstock. Phase D simulated a beginning of life U-Zr fuel core with enriched uranium fuel although approximately 10% of the fuel in the outer zone of the Phase D core was plutonium because {sup 240}Pu was required to provide a neutron source for the modified source multiplication technique used for many reactivity worth measurements such as sodium void worth in ZPPR. Phase C simulated the intermediate state between beginning of life and equilibrium cycle conditions with 50% enriched uranium fuel and 50% plutonium fuel in the inner and outer core zones. These configurations represent the various stages of reactor operating conditions. Phase A did not contain zirconium (metal fuel is typically alloyed with Zr) while Phases B, C and D did contain zirconium although the limited plate inventory restricted the zirconium zone to the inner core zone. This set of experiments was performed between April 1985 and July 1986 and focused on validation of both the concept and modeling. In each phase, there were multiple loadings for sub-critical, critical, and with regard to this manuscript, axial expansion worth measurements. Combined, these cores can be used to assess the accuracy of physics codes and evaluated cross section data for IFR concept reactors. This paper presents a recent effort that was made on retrieving validation data from the ZPPR-15 experiments and on deterministic modeling and analysis using MC{sup 2}-3/DIF3D for code validation. Axial expansion experiments and ZPPR-15D loading 206 were selected for this analysis. An explicit modeling of the axial expansion (introduction of gaps between sections of drawer) of ZPPR-15D loading 206 yielded a 32% over-prediction in the worth of the axial expansion with the MC2-3/DIF3D models. This indicates a consistent bias between ZPPR-15B and ZPPR-15D with regard to the deterministic modeling of the experiments. As part of future work, we intend on investigating whether the cross section processing or homogenization model is to blame, but we note with such small changes in k-effective in a large model, it is rather difficult to obtain zero errors as is typical for other worth measurements. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A multi-collector ICP-MS method for quantification of plutonium, uranium, and americium in hair and nails of occupationally or medically exposed individuals

The 239 Pu, 238 U, and 241 Am concentrations and 239 Pu/ 240 Pu, 235 U/ 238 U, and 236 U/ 238 U atom ratios were measured in the hair and nail samples from individuals who donated their bodies to the United States Transuranium and Uranium Registries. Further, the concentration of 239 Pu ranged from 0.22–15.8 ng/kg. The 240 Pu/ 239 Pu isotopic ratios ranged from 0.026 to 0.127 which is consistent with weapons-grade plutonium. Concentration of uranium fell between 1.84 µg/kg and 29.5 µg/kg and 235 U/ 238 U ratios ranged from 4.8×10 -3 to 7.6×10 -3 . Elevated 236 U/ 238 U atom ratios were measured in two cases and ranged from 5.0×10 -6 – 2.4×10 -5 indicating exposure to spent or reprocessed uranium material. The concentration of 241 Am was measured in four hair samples and ranged from 0.02–0.21 ng/kg.

61 RADIATION PROTECTION AND DOSIMETRY↗

New simulation capability for gamma ray mirror experiments

This report provides a description of the simulation toolkit developed at Lawrence Livermore National Laboratory to support the design of nuclear safeguards experiments using grazing incidence multilayer mirrors in the energy band of uranium (U) and plutonium (Pu) emission lines. This effort was motivated by the data analysis of a scoping experiment at the Irradiated Fuels Examination Facility (IFEL) at Oak Ridge National Laboratory in FY13 and of a benchmark experiment at the Idaho National Laboratory (INL) in FY14 that highlighted the need for predictive tools built around a ray-tracing capability. This report presents the simulation toolkit and relevant results such as the simulated spectra for TMI, MOX, and ATM106 fuel rods based on spent fuel models provided by Los Alamos National Laboratory and for a virgin high 240 Pu-content fuel plate, as well as models of the IFEL and INL experiments implemented in the ray tracing tool. The beam position and height were validated against the INL ~60 keV americium data. Examples of alternate configurations of the optics or experimental set-up illustrate the future use of the simulation suite to guide the next IFEL experimental campaign.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fissile Material Stockpile Declarations and Cooperative Nuclear Archaeology

With the beginning of the Cold War, the United States and the Soviet Union quickly began to produce fissile material (plutonium and highly enriched uranium, HEU) for military purposes on an industrial scale. By the mid-1950s, both countries were already making ton-quantities of fissile material per year to supply their growing nuclear arsenals. They were soon joined by the United Kingdom (1951), France (1955), China (1964), and Israel (1965)—and later by India, Pakistan, and finally North Korea. By the time most of these production efforts ended in the early 1990s, the global stockpile of military fissile material had reached fantastic levels. While the combined global nuclear weapon inventory had peaked at about 64,000 in 1986,1 the military fissile-material stockpile ultimately reached almost 2200 tons (240 tons of plutonium and 1960 tons of highly enriched uranium), which is sufficient to make about 200,000 simple nuclear weapons.2 Since the end of the Cold War, almost 700 tons of highly enriched uranium have been down-blended and other material is now reserved for naval fuel. Overall, the military material available for weapon purposes today is sufficient for more than 150,000 weapons (Figure 1).

Glaser, Alexander↗

Nuclear Structure and Decay Data for A=240

The experimental reaction and decay studies producing nuclei in the A=240 mass chain have been reviewed. Data on elements from uranium (Z=92) to einsteinium (Z=99) are included, and level and decay schemes are presented for these nuclides. Furthermore, this work supersedes the previous evaluation for this mass chain (2008Si25).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗