Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “URANIUM 233”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

233 U oxide Measurement Campaign Data: Passive and Active Neutron Multiplicity Measurements of Uranium Oxide Samples at Oak Ridge National Laboratory

During FY2023, three measurement campaigns were conducted at Oak Ridge National Laboratory. The goal was to quantify the neutron signatures of samples of uranium oxide containing uranium 233 and uranium-235. This report presents the neutron multiplicity data obtained using the large volume active well coincidence counter (LV-AWCC).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutronic analysis of a fusion hybrid reactor

In a PHYSOR 2010 paper(1) we introduced a fusion hybrid reactor whose fusion component is the gasdynamic mirror (GDM), and whose blanket was made of thorium - 232. The thrust of that study was to demonstrate the performance of such a reactor by establishing the breeding of uranium - 233 in the blanket, and the burning thereof to produce power. In that analysis, we utilized the diffusion equation for one-energy neutron group, namely, those produced by the fusion reactions, to establish the power distribution and density in the system. Those results should be viewed as a first approximation since the high energy neutrons are not effective in inducing fission, but contribute primarily to the production of actinides. In the presence of a coolant, however, such as water, these neutrons tend to thermalize rather quickly, hence a better assessment of the reactor performance would require at least a two group analysis, namely the fast and thermal groups. We follow that approach and write an approximate set of equations for the fluxes of these groups. From these relations we deduce the all-important quantity, k{sub eff}, which we utilize to compute the multiplication factor, and subsequently, the power density in the reactor. We show that k{sub eff} can be made to have a value of 0.99, thus indicating that 100 thermal neutrons are generated per fusion neutron, while allowing the system to function as 'subcritical.' Moreover, we show that such a hybrid reactor can generate hundreds of megawatts of thermal power per cm of length depending on the flux of the fusion neutrons impinging on the blanket. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

ATONA TE-TIMS of minor uranium isotopes (FY25 Mid-Year Report)

Isotopic measurements of the minor isotopes of uranium ( 233 U, 234 U, 236 U) are indispensable measures for material accountability and processing history but can be particularly challenging to accurately measure due to the very low abundance of the minor isotopes relative to 238 U, or 235 U in the case of highly enriched uranium (HEU). The goal of this project is to quantify detection limits for minor uranium isotope species at environmental levels (e.g 236 U/ 238 U < 10 -7 ) utilizing an ATONA-outfitted instrument and the Total Evaporation Thermal Ionization Mass Spectrometry (TE-TIMS) method. In the first half of Fiscal Year 2025, we set out to identify a suitable experimental material (Task 1) and to optimize our TE-TIMS measurement routine (Task 2). We have successfully identified a material and are in the process of getting an aliquot shipped to LANL. Simultaneously, we began working on our measurement routine utilizing CRM 112A. The results of each task are discussed in detail below.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fuel Breeding and Core Behavior Analyses on In Core Fuel Management of Water Cooled Thorium Reactors

Thorium fuel cycle with recycled U-233 has been widely recognized having some contributions to improve the water-cooled breeder reactor program which has been shown by a feasible area of breeding and negative void reactivity which confirms that fissile of 233U contributes to better fuel breeding and effective for obtaining negative void reactivity coefficient as the main fissile material. The present study has the objective to estimate the effect of whole core configuration as well as burnup effects to the reactor core profile by adopting two dimensional model of fuel core management. About more than 40 months of cycle period has been employed for one cycle fuel irradiation of three batches fuel system for large water cooled thorium reactors. All position of fuel arrangement contributes to the total core conversion ratio which gives conversion ratio less than unity of at the BOC and it contributes to higher than unity (1.01) at the EOC after some irradiation process. Inner part and central part give the important part of breeding contribution with increasing burnup process, while criticality is reduced with increasing the irradiation time. Feasibility of breeding capability of water-cooled thorium reactors for whole core fuel arrangement has confirmed from the obtained conversion ratio which shows higher than unity. Whole core analysis on evaluating reactivity change which is caused by the change of voided condition has been employed for conservative assumption that 100% coolant and moderator are voided. It obtained always a negative void reactivity coefficient during reactor operation which shows relatively more negative void coefficient at BOC (fresh fuel composition), and it becomes less negative void coefficient with increasing the operation time. Negative value of void reactivity coefficient shows the reactor has good safety properties in relation to the reactivity profile which is the main parameter in term of criticality safety analysis. Therefore, this evaluation has confirmed that breeding condition and negative coefficient can be obtained simultaneously for water-cooled thorium reactor obtains based on the whole core fuel arrangement.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Analysis on fuel breeding capability of FBR core region based on minor actinide recycling doping

Nuclear fuel breeding based on the capability of fuel conversion capability can be achieved by conversion ratio of some fertile materials into fissile materials during nuclear reaction processes such as main fissile materials of U-233, U-235, Pu-239 and Pu-241 and for fertile materials of Th-232, U-238, and Pu-240 as well as Pu-238. Minor actinide (MA) loading option which consists of neptunium, americium and curium will gives some additional contribution from converted MA into plutonium such as conversion Np-237 into Pu-238 and it's produced Pu-238 converts to Pu-239 via neutron capture. Increasing composition of Pu-238 can be used to produce fissile material of Pu-239 as additional contribution. Trans-uranium (TRU) fuel (Mixed fuel loading of MOX (U-Pu) and MA composition) and mixed oxide (MOX) fuel compositions are analyzed for comparative analysis in order to show the effect of MA to the plutonium productions in core in term of reactor criticality condition and fuel breeding capability. In the present study, neptunium (Np) nuclide is used as a representative of MAin trans-uranium (TRU) fuel composition as Np-MOX fuel type. It was loaded into the core region gives significant contribution to reduce the excess reactivity in comparing to mixed oxide (MOX) fuel and in the same time it contributes to increase nuclear fuel breeding capability of the reactor. Neptunium fuel loading scheme in FBR core region gives significant production of Pu-238 as fertile material to absorp neutrons for reducing excess reactivity and additional contribution for fuel breeding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Radionuclide inventories for the F- and H-area seepage basin groundwater plumes

Within the General Separations Areas (GSA) at the Savannah River Site (SRS), significant inventories of radionuclides exist within two major groundwater contamination plumes that are emanating from the F- and H-Area seepage basins. These radionuclides are moving slowly with groundwater migration, albeit more slowly due to interaction with the soil and aquifer matrix material. The purpose of this investigation is to quantify the activity of radionuclides associated with the pore water component of the groundwater plumes. The scope of this effort included evaluation of all groundwater sample analyses obtained from the wells that have been established by the Environmental Compliance & Area Completion Projects (EC&ACP) Department at SRS to monitor groundwater contamination emanating from the F- and H-Area Seepage Basins. Using this data, generalized groundwater plume maps for the radionuclides that occur in elevated concentrations (Am-241, Cm-243/244, Cs-137, I-129, Ni-63, Ra-226/228, Sr-90, Tc-99, U-233/234, U-235 and U-238) were generated and utilized to calculate both the volume of contaminated groundwater and the representative concentration of each radionuclide associated with different plume concentration zones.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Total Kinetic Energy and Fragment Mass Distribution of Neutron-Induced Fission of U-233

Properties of fission in U-233 were studied at the Los Alamos Neutron Science Center (LANSCE) at incident neutron energies from thermal to 40 MeV at both the Lujan Neutron Scattering Center flight path 12 and at WNR flight path 90-Left from Dec 2016 to Jan 2017. Fission fragments are observed in coincidence using a twin ionization chamber with Frisch grids. The average total kinetic energy (TKE) released from fission and fragment mass distributions are calculated from observations of energy deposited in the detector and conservation of mass and momentum. Accurate experimental measurements of these parameters are necessary to better understand the fission process and obtain data necessary for calculating criticality. The average TKE released from fission has been well characterized for several isotopes at thermal neutron energy, however, few measurements have been made at fast neutron energies. This experiment expands on previous successful experiments using an ionization chamber to measure TKE and fragment mass distributions of U-235, U-238, and Pu-239. This experiment requires the full spectrum of neutron energies and can therefore only be performed at a small number of facilities in the world. The required full neutron energy spectrum is obtained by combining measurements from WNR 90L and Lujan FP12 at LANSCE.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

On the Uranium and Plutonium Nuclear Data Evaluations [Slides]

This presentation provides overviews of uraniums, 233 U and 235 U, plutonium research including motivations, current status in ENDF/B-VIII.0, the inclusion of sub-thermal data, and the inclusion of LANL ratio capture-to-fission data. Additionally, the preliminary fit of Mosby’s data as reported, fluctuating neutron multiplicities, uncertainty in evaluated libraries, and experimental effects are also presented. The presentation concludes by providing a summary of plans for the U and Pu evaluation work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

India's baseline plan for nuclear energy self-sufficiency.

India's nuclear energy strategy has traditionally strived for energy self-sufficiency, driven largely by necessity following trade restrictions imposed by the Nuclear Suppliers Group (NSG) following India's 'peaceful nuclear explosion' of 1974. On September 6, 2008, the NSG agreed to create an exception opening nuclear trade with India, which may create opportunities for India to modify its baseline strategy. The purpose of this document is to describe India's 'baseline plan,' which was developed under constrained trade conditions, as a basis for understanding changes in India's path as a result of the opening of nuclear commerce. Note that this treatise is based upon publicly available information. No attempt is made to judge whether India can meet specified goals either in scope or schedule. In fact, the reader is warned a priori that India's delivery of stated goals has often fallen short or taken a significantly longer period to accomplish. It has been evident since the early days of nuclear power that India's natural resources would determine the direction of its civil nuclear power program. It's modest uranium but vast thorium reserves dictated that the country's primary objective would be thorium utilization. Estimates of India's natural deposits vary appreciably, but its uranium reserves are known to be extremely limited, totaling approximately 80,000 tons, on the order of 1% of the world's deposits; and nominally one-third of this ore is of very low uranium concentration. However, India's roughly 300,000 tons of thorium reserves account for approximately 30% of the world's total. Confronted with this reality, the future of India's nuclear power industry is strongly dependent on the development of a thorium-based nuclear fuel cycle as the only way to insure a stable, sustainable, and autonomous program. The path to India's nuclear energy self-sufficiency was first outlined in a seminal paper by Drs. H. J. Bhabha and N. B. Prasad presented at the Second United Nations Conference on the Peaceful Uses of Atomic Energy in 1958. The paper described a three stage plan for a sustainable nuclear energy program consistent with India's limited uranium but abundant thorium natural resources. In the first stage, natural uranium would be used to fuel graphite or heavy water moderated reactors. Plutonium extracted from the spent fuel of these thermal reactors would drive fast reactors in the second stage that would contain thorium blankets for breeding uranium-233 (U-233). In the final stage, this U-233 would fuel thorium burning reactors that would breed and fission U-233 in situ. This three stage blueprint still reigns as the core of India's civil nuclear power program. India's progress in the development of nuclear power, however, has been impacted by its isolation from the international nuclear community for its development of nuclear weapons and consequent refusal to sign the Nuclear Nonproliferation Treaty (NPT). Initially, India was engaged in numerous cooperative research programs with foreign countries; for example, under the 'Atoms for Peace' program, India acquired the Cirus reactor, a 40 MWt research reactor from Canada moderated with heavy water from the United States. India was also actively engaged in negotiations for the NPT. But, on May 18, 1974, India conducted a 'peaceful nuclear explosion' at Pokharan using plutonium produced by the Cirus reactor, abruptly ending the era of international collaboration. India then refused to sign the NPT, which it viewed as discriminatory since it would be required to join as a non-nuclear weapons state. As a result of India's actions, the Nuclear Suppliers Group (NSG) was created in 1975 to establish guidelines 'to apply to nuclear transfers for peaceful purposes to help ensure that such transfers would not be diverted to unsafeguarded nuclear fuel cycle or nuclear explosive activities. These nuclear export controls have forced India to be largely self-sufficient in all nuclear-related technologies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Th/U-233 multi-recycle in PWRs.

The use of thorium in current or advanced light water reactors (LWRs) has been of interest in recent years. These interests have been associated with the need to increase nuclear fuel resources and the perceived non-proliferation advantages of the utilization of thorium in the fuel cycle. Various options have been considered for the use of thorium in the LWR fuel cycle including: (1) its use in a once-through fuel cycle to replace non-fissile uranium or to extend fuel burnup due to its attractive fertile material conversion, (2) its use for fissile plutonium burning in limited recycle cores, and (3) its advantage in limiting the transuranic elements to be disposed off in a repository (if only Th/U-233 fuel is used). The possibility for thorium utilization in multirecycle system has also been considered by various researchers, primarily because of the potential for near breeders with Th/U-233 in the thermal energy range. The objective of this project is to evaluate the potential of the Th/U-233 fuel multirecycle in current LWRs, with focus this year on pressurized water reactors (PWRs). In this work, approaches for ensuring a sustainable multirecycle without the need for external source of makeup fissile material have been investigated. The intent is to achieve a design that allows existing PWRs to be used with minimal modifications. In all cases including homogeneous and heterogeneous assembly designs, the assembly pitch is kept consistent with that of the current PWRs (21.5 cm used). Because of design difficulties associated with using the same geometry and dimensions as a PWR core, the potential modifications (other than assembly pitch) that would be needed for PWRs to ensure a sustainable multirecycle system have been investigated and characterized. Additionally, the implications of the use of thorium on the LWR fuel cycle are discussed. In Section 2, background information on studies evaluating the use of thorium in the fuel cycle is provided, but focusing on Th/U-233 multirecycle. Recent studies done internationally and in the U.S. are briefly summarized. Additionally, the previous U.S. thorium breeder experiment in the Shippingport reactor is briefly discussed. The objective of this work and the reactor design issues associated with multirecycle of Th/U-233 are discussed in Section 3. The approaches required to achieve a sustainable system are discussed and evaluated. Homogeneous assembly modeling results are presented in this section. In Section 4, a 17-by-17 heterogeneous assembly design has been selected and evaluated, based on its positive attributes for sustainable Th/U-233 multirecycle. A feasibility study is briefly discussed at the end of this section followed by recommendations for future activities. Section 5 discusses the attributes of the 17-by-17 heterogeneous assembly design. The material mass flow data and fuel cycle impact data are reported in this section. Discussions on the fuel cycle implications of thorium fuel utilization are provided in Section 6. This includes information on fuel sources, fuel manufacturing, fuel reprocessing, and re-fabrication. The conclusions of the study are provided in Section 7.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Neutron-induced fission cross-section of 233U in the energy range 0.5<En<20 MeV

The neutron-induced fission cross-section of 233U has been measured at the CERN n TOF facility relative to the standard fission cross-section of 235U between 0.5 and 20MeV. The experiment was performed with a fast ionization chamber for the detection of the fission fragments and to discriminate against α-particles from the natural radioactivity of the samples. The high instantaneous flux and the low background of the n TOF facility result in data with uncertainties of ≈ 3%, which were found in good agreement with previous experiments. The high quality of the present results allows to improve the evaluation of the 233U(n,f) cross-section and, consequently, the design of energy systems based on the Th/U cycle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rescuing a Treasure Uranium-233

Uranium-233 (233U) is a synthetic isotope of uranium formed under reactor conditions during neutron capture by natural thorium (232Th). At high purities, this synthetic isotope serves as a crucial reference for accurately quantifying and characterizing natural uranium isotopes for domestic and international safeguards. Separated 233U is stored in vaults at Oak Ridge National Laboratory. These materials represent a broad spectrum of 233U from the standpoint isotopic purity the purest being crucial for precise analyses in safeguarding uranium. All 233U at ORNL currently is scheduled to be down blended with depleted uranium beginning in 2015. Such down blending will permanently destroy the potential value of pure 233U samples as certified reference material for use in uranium analyses. Furthermore, no replacement 233U stocks are expected to be produced in the future due to a lack of operating production capability and the high cost of returning to operation this currently shut down capability. This paper will describe the efforts to rescue the purest of the 233U materials arguably national treasures from their destruction by down blending.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Why reconsider the thorium fuel cycle?

In this paper we have endeavored to present the available technical information on the potential use of Th in nuclear fuel cycle (FC) applications as compared to U without subjective evaluations. Where helpful, we have compared the technical attributes of Th-232 as a fertile isotope and U-233 as a fissile isotope with other similar isotopes (i.e., U-238, and U-235 and Pu-239, respectively). In addition, we have summarized (a) experience gained to-date with fabricating and reprocessing of Th-232/U-233 fuels, (b) factors concerning Th fuel irradiation in both test reactors and power reactors, and (c) differences in the backend of the FC with emphasis on repository risks. As might be expected, many technical aspects of Th vs. U have not changed since the sixties. However, there are some factors elaborated in this paper that have changed. Changes potentially encouraging Th use are: (a) the ability to recover large amounts of Th as a byproduct with small attendant costs and environmental impacts, (b) the potential to produce fewer minor actinides (MA) and less Pu during power production, and (c) increased concerns about proliferation which might be somewhat mitigated by the high radioactivity and amenability to isotopic dilution of U-233. Changes challenging Th utilization are: (a) obtaining sufficient experience handling Th/U-233 fuels, (b) the existence of large inventories of depleted U and continuing discovery of large U resources, and (c) recognition that the extent to which U-233 might mitigate proliferation concerns is not as large as originally hoped.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Transuranic Waste Burning Potential of Thorium Fuel in a Fast Reactor - 12423

Westinghouse Electric Company (referred to as 'Westinghouse' in the rest of this paper) is proposing a 'back-to-front' approach to overcome the stalemate on nuclear waste management in the US. In this approach, requirements to further the societal acceptance of nuclear waste are such that the ultimate health hazard resulting from the waste package is 'as low as reasonably achievable'. Societal acceptability of nuclear waste can be enhanced by reducing the long-term radiotoxicity of the waste, which is currently driven primarily by the protracted radiotoxicity of the transuranic (TRU) isotopes. Therefore, a transition to a more benign radioactive waste can be accomplished by a fuel cycle capable of consuming the stockpile of TRU 'legacy' waste contained in the LWR Used Nuclear Fuel (UNF) while generating waste which is significantly less radio-toxic than that produced by the current open U-based fuel cycle (once through and variations thereof). Investigation of a fast reactor (FR) operating on a thorium-based fuel cycle, as opposed to the traditional uranium-based is performed. Due to a combination between its neutronic properties and its low position in the actinide chain, thorium not only burns the legacy TRU waste, but it does so with a minimal production of 'new' TRUs. The effectiveness of a thorium-based fast reactor to burn legacy TRU and its flexibility to incorporate various fuels and recycle schemes according to the evolving needs of the transmutation scenario have been investigated. Specifically, the potential for a high TRU burning rate, high U-233 generation rate if so desired and low concurrent production of TRU have been used as metrics for the examined cycles. Core physics simulations of a fast reactor core running on thorium-based fuels and burning an external TRU feed supply have been carried out over multiple cycles of irradiation, separation and reprocessing. The TRU burning capability as well as the core isotopic content have been characterized. Results will be presented showing the potential for thorium to reach a high TRU transmutation rate over a wide variety of fuel types (oxide, metal, nitride and carbide) and transmutation schemes (recycle or partition of in-bred U-233). In addition, a sustainable scheme has been devised to burn the TRU accumulated in the core inventory once the legacy TRU supply has been exhausted, thereby achieving long-term virtually TRU-free. A comprehensive 'back-to-front' approach to the fuel cycle has recently been proposed by Westinghouse which emphasizes achieving 'acceptable', low-radiotoxicity, high-level waste, with the intent not only to satisfy all technical constraints but also to improve public acceptance of nuclear energy. Following this approach, the thorium fuel cycle, due to its low radiotoxicity and high potential for TRU transmutation has been selected as a promising solution. Additional studies not shown here have shown significant reduction of decay heat. The TRU burning potential of the Th-based fuel cycle has been illustrated with a variety of fuel types, using the Toshiba ARR to perform the analysis, including scenarios with continued LWR operation of either uranium fueled or thorium fueled LWRs. These scenarios will afford overall reduction in actinide radiotoxicity, however when the TRU supply is exhausted, a continued U- 235 LWR operation must be assumed to provide TRU makeup feed. This scenario will never reach the characteristically low TRU content of a closed thorium fuel cycle with its associated potential benefits on waste radiotoxicity, as exemplified by the transition scenario studied. At present, the cases studied indicate ThC as a potential fuel for maximizing TRU burning, while ThN with nitrogen enriched to 95% N-15 shows the highest breeding potential. As a result, a transition scenario with ThN was developed to show that a sustainable, closed Th-cycle can be achieved starting from burning the legacy TRU stock and completing the transmutation of the residual TRU remaining in the core inventory after the legacy TRU external supply has been exhausted. The radiotoxicity of the actinide waste during the various phases has been characterized, showing the beneficial effect of the decreasing content of TRU in the recycled fuel as the transition to a closed Th-based fuel cycle is undertaken. Due to the back-to-front nature of the proposed methodology, detailed designs are not the first step taken when assessing a fuel cycle scenario potential. As a result, design refinement is still required and should be expected in future studies. Moreover, significant safety assessment, including determination of associated reactivity coefficients, fuel and reprocessing feasibility studies and economic assessments will still be needed for a more comprehensive and meaningful comparison against other potential solutions. With the above considerations in mind, the potential advantages of thorium fuelled reactors on HLW management optimization lead us to believe that thorium fuelled reactor systems can play a significant role in the future and deserve further consideration. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Analysis of Synergistic Fuel Cycle Options with Thorium and Heavy Water Reactors

Fuel cycle options (FCOs) with thorium-based fuels have characteristics that may have benefits for meeting certain objectives, such as transuranic actinide inventory management and overall natural resource utilization. Neutron irradiation of thorium and uranium-233 results in negligible production of transuranic actinides. This advantage is compromised, to a degree, when thorium fuels are used in conjunction with uranium-238; however, strategic reprocessing and fuel use (e.g., recycle of plutonium and/or minor actinides) can be used to manage this problem. Furthermore, thorium FCOs with reprocessing can extend the availability of natural nuclear resources by breeding new fissile material, recovering and recycling unused material, and achieving high burnups. In instances where natural thorium is more readily available than uranium, FCOs which use thorium may be preferable from sustainability and energy security perspectives. However, many hybrid uranium-thorium FCOs struggle to perform well in this regard, since large amounts of external fissile material (and therefore natural uranium) are required to breed the required uranium-233. DOE's evaluation and screening effort reports that for every metric ton (MT) of U-233 bred in a light water reactor for reuse, about 1000 MT of natural uranium are required to support such breeding, much of which is used inefficiently due to enrichment. The combination of HWRs and thorium-based fuels has the potential to reduce this consumption of natural uranium resources. Because heavy water moderates neutrons without significant absorption, fissile material requirements are lower compared to those of LWRs. This has enabled conventional 'once-through' HWRs to operate with only slightly-enriched or even natural uranium. Also, HWRs can be combined with LWRs in multistage FCOs where used LWR fuel can be processed and the remaining fissile content is sufficient to support use as fuel in HWRs in spite of the presence of neutron poisons (e.g., uranium-236); this concept has been demonstrated at a research scale in Korea. Thus, additional energy is extracted from the same initial natural uranium feed and uranium enrichment effort. Another consideration with using thorium-based fuels in HWRs is the current limited operational experience of the reactors and associated fuel cycle facilities using these fuels. However, work continues internationally towards gaining further experience. For example, at equilibrium the third stage of India's planned Three-Stage Nuclear Power Program uses thorium/uranium-233 or thorium/plutonium fuels with a fissile supply from second-stage fast reactors. Further, China plans to experiment with low-enriched uranium (LEU)-Th CANFLEX fuel bundles in a once-through configuration in its HWRs and a long-term objective is to transition to thorium use in a closed HWR FCO. Vanderbilt University (VU) and Oak Ridge National Laboratory (ORNL) are characterizing multi-stage, thermal-reactor FCOs that incorporate thorium and examining their potential performance. This paper presents insights from the examination of FCOs which consider the synergy of HWRs and thorium. Two multi-stage FCOs which incorporate thorium-based fuels in HWRs have been examined for their potential, one which uses recycled PWR uranium oxide fuel in conjunction with thorium in an HWR, and another that uses recycled HWR fuel in an MSR which also includes thorium. Both of the systems studied offer resource utilization improvements as compared to a once-through LWR fueled with low-enrichment uranium and highlight the potential synergy of thorium and HWRs. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Method for Understanding the Behaviour of Radioactive Decay Chains in Radiological Assessments - 19382

In many radiological groundwater pathway assessments, especially those where the assessment timescales of interest are relatively short (say a few thousand years or less), contributions to effective dose or radiological risk are dominated by radionuclides such as C-14, Cl-36 or I-129. Over longer timescales, additional radionuclides can also become key contributors to risk. In particular, members of the U-238 decay chain, notably Ra-226 and Pb-210, are likely to be key radionuclides. Other decay chains that can contribute significantly to dose or risk at times far into the future include Np-237 → U-233 → Th-229 and U-235 → Pa-231 → Ac-227. In this paper, a method is described for understanding decay chain behaviour in radiological assessments. The method uses a graphical approach in which the various modes of transport and decay in a system of connected compartments are represented as pathways between two nodes in a two-dimensional grid. Each pathway corresponds to a distinct transport and decay process. By so doing, the different transport and decay processes can be identified in a systematic way. The result is an algorithm for generating the contributions to effective dose or radiological risk without explicit solution of the transport equations. The method has been tested against numerical models and analytic solutions and found to give excellent agreement, while at the same time providing information about decay chain behaviour that would be difficult to obtain from a numerical assessment model. The power of the method is illustrated by applying it to some examples based on real repository concepts. (authors)

07 ISOTOPE AND RADIATION SOURCES↗