SEARCH · Engineering Papers
Results for “ULTRAVIOLET FILTER”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Measured optical performance of three Fabry-Perot interferometers for use in a tunable ultraviolet filter
A narrowband ultraviolet (UV) filter would allow the first monochromatic two-dimensional images of astrophysical plasmas to be obtained in UV emission lines. The high etendue and spectral resolving power of the Fabry-Perot (FP) interferometer make it an excellent candidate for use in a tunable UV filter, provided that adequate optical performance can be obtained. Laboratory measurements of three UV FP interferometers with progressively greater dielectric mirror reflectances are described. The measurements demonstrate the adequate reflectivity, absorption, and small-scale smoothness of currently available coatings and substrates for UV interferometry. The measurements are conducted at 228.8 nm utilizing a cadmium hollow cathode light source. The best performing interferometer has a finesse of 41 and maximum transmittance of 0.38 over a coating-performance-dominated 3-mm-diam subaperture and a finesse of 26 and maximum transmittance of 0.32 over a parabolic-defect-dominated 30-mm-diam aperture. This interferometer is well suited for use in a UV filter system.
Research in far ultraviolet filtering for space optical systems
Design and fabrication of multilayer interference filters for ultraviolet
Biocompatible Bi(OH)3 nanoparticles with reduced photocatalytic activity as possible ultraviolet filter in sunscreens
Highlights: • Facilesynthesis of inorganic Bi(OH){sub 3} nanoparticles. • High biocompatibility in human skin and dog kidney cells in vitro. • Ultraviolet filter capable of reducing the photocatalytic activity of TiO{sub 2} and ZnO. • Preparation of TiO{sub 2}/Bi(OH){sub 3} and classical TiO{sub 2}/ZnO sunscreen formulations. • Significantly improved photoprotection and photostability compared to TiO{sub 2}/ZnO. - Abstract: In this study we investigate readily synthesised Bi(OH){sub 3} nanoparticles as a novel, multifunctional ultraviolet filter for sunscreen. The absorbance of Bi(OH){sub 3} NPs in the ultraviolet region is comparable to that of both ZnO and TiO{sub 2} NPs used in commercial sunscreens. In vitro photoprotection results show that the combination of TiO{sub 2}/Bi(OH){sub 3} is more efficient than TiO{sub 2}/ZnO over the whole UV range, with an increase in sun protection factor of 28%. The emulsions show rheological properties comparable to those of commercial sunscreens. The combination of TiO{sub 2}/Bi(OH){sub 3} led to insignificant damage on pre-painted steel panels after exterior exposure for twelve weeks. We also demonstrate that the addition of Bi(OH){sub 3} NPs reduces the degradation of crystal violet by photocatalytically active TiO{sub 2} or ZnO NPs under ultraviolet exposure. Finally, assessment of the biocompatibility of Bi(OH){sub 3} with HaCaT keratinocytes and Madin-Darby Canine Kidney (MDCK) cells in vitro is described.
Ultraviolet interference filters
Ultraviolet band pass interference filter development using thin aluminum metal film
Radiation Damage Effects in Far Ultraviolet Filters and Substrates
New advances in VUV thin film filter technology have been made using filter designs with multilayers of materials such as Al2O3, BaF2, CaF2, HfO2, LaF3, MgF2, and SiO2. Our immediate application for these filters will be in an imaging system to be flown on a satellite where a 2 X 9 R(sub E) orbit will expose the instrument to approximately 275 krads of radiation. In view of the fact that no previous studies have been made on potential radiation damage of these materials in the thin film format, we report on such an assessment here. Transmittances and reflectances of BaF2, CaF2, HfO2, LaF3, MgF2, and SiO2 thin films on MgF2 substrates, Al2O3 thin films on fused silica substrates, uncoated fused silica and MgF2, and four multilayer filters made from these materials were measured from 120 nm to 180 nm before and after irradiation by 250 krads from a Co-60 gamma radiation source. No radiation-induced losses in transmittance or reflectance occurred in this wavelength range. Additional postradiation measurements from 160 nm to 300 nm indicated a 3 - 5% radiation-induced absorption near 260 nm in some of the samples with MgF2 substrates. From these measurements it is concluded that far ultraviolet filters made from the materials tested should experience less that 5% change from exposure to up to 250 krads of high energy radiation in space applications.
Far ultraviolet filters for the ISTP UV imager
The far ultraviolet (FUV) imager for the International Solar-Terrestrial Physics (ISTP) mission is designed to image four features of the aurora: O I lines at 130.4 nm and 135.6 nm and the N2 Lyman-Birge-Hopfield (LBH) bands between 140 nm-160 nm (LBH long) and 160 nm-180 nm (LBH long). We report the design and fabrication of narrow-band and broadband filters for the ISTP FUV imager. Narrow-band filters designed and fabricated for the O I lines have a bandwidth of less than 5 nm and a peak transmittance of 22.3 and 29.6 percent at 130.4 nm and 135.6 nm, respectively. Broadband filters designed and fabricated for LBH bands have the transmittance greater than 40 percent for LBH short and close to 60 percent for LBH long. Blocking of out-of-band wavelengths for all filters is better than 0.001 percent with the transmittance at 121.6 nm of less than 10 exp -6 percent.
Astronomical radiation measurements. III - An analysis of far-ultraviolet filter observations of stars.
Far UV filter observations of main sequence and giant stars analyzed for attainable magnitude accuracy, comparing observations with model atmospheres
Absolute calibration of ultraviolet filter photometry
The essential features of the calibration procedure can be divided into three parts. First, the shape of the bandpass of each photometer was determined by measuring the transmissions of the individual optical components and also by measuring the response of the photometer as a whole. Secondly, each photometer was placed in the essentially-collimated synchrotron radiation bundle maintained at a constant intensity level, and the output signal was determined from about 100 points on the objective. Finally, two or three points on the objective were illuminated by synchrotron radiation at several different intensity levels covering the dynamic range of the photometers. The output signals were placed on an absolute basis by the electron counting technique described earlier.
Multi-Spectral Solar Telescope Array. IV - The soft X-ray and extreme ultraviolet filters
NASA's Multi-Spectral Solar Telescope Array uses various combinations of thin foil filters composed of Al, C, Te, Be, Mo, Rh, and phthalocyanine to achieve the requisite radiation-rejection characteristics. Such rejection is demanded by the presence of strong EUV radiation at longer wavelengths where the specular reflectivity of multilayer mirrors can cause 'contamination' of the image in the narrow band defined by the Bragg condition.
Extreme ultraviolet filters for 58.4 and 83.4 nm
We report the design of an EUV filter for He I at 58.4 nm and the design and fabrication of an EUV filter for O II at 83.4 nm. Both filters are designed as combinations of three narrow-band reflection filters. The net transmittance through both EUV filters is close to 10 percent with bandwidths less than 10 nm, and blocking better than 0.005 percent for out-of-band wavelengths. A theoretical calculation of the 83.4 nm filter predicts higher values for the peak transmittance than the measured spectral performance of the fabricated filter. Since aluminum is one of the film materials used for the fabrication of EUV filters, the aluminum film oxidation can be modeled in order to explain the discrepancy between the theory and experiment. Since the filters operate at angles of incidence up to 50 deg, the optical components of a system can serve as both the filtering and imaging elements.
Ultraviolet damage in solar cell assemblies with various UV filters
Ultraviolet damage to the new violet and non-reflective type solar cell assemblies, was studied, and potential advantages of using coverslides with no filters or filters with cut-off wavelengths below 0.35 micron were determined. The experiments consisted of three types of tests on fused silica coverslides with 0.35- and 0.30-micron cut-off filters and no cut-off filters, as well as on ceria-doped microsheet coverslides. Ultraviolet irradiation for over 1500 hours at one sun conditions (AMO) was carried out under vacuum of about 1 million torr. Nearly identical results for non-reflective type cells with 0.35-micro cut-off filters or ceria-doped coverslides were obtained. The 0.30-um filtered cell shows greater than average degradation. The unfiltered cell shows an abrupt drop in the first 20 UVSH and very little subsequent degradation.
Ultraviolet radiation detector and dosimeter
An ultraviolet radiation dosimeter apparatus for measuring an individual's ultraviolet radiation exposure from incoming ultraviolet rays, including an ultraviolet radiation dosimeter body; an ultraviolet filter in the ultraviolet radiation dosimeter body; a detector semiconductor substrate in the ultraviolet radiation dosimeter body connected to the ultraviolet filter for detecting the incoming ultraviolet rays and producing a signal, the semiconductor substrate made of ZnSe(Te), and a chip in the ultraviolet radiation dosimeter body for receiving the signal and measuring the individual's ultraviolet radiation exposure from the incoming ultraviolet rays.
Broadband ultraviolet reflectance filters for space applications.
It is shown that a simple metal-dielectric-metal filter for broadband ultraviolet (BUV) reflectance control can provide a stable and effective means for reducing stray visible radiation in UV reflective optical systems. The application of such a filter in a BUV instrument resulted in a reduction of scattered visible light by at least an order of magnitude. The instrument has been in orbit for 2.5 year without loss of sensitivity or an increase in scattered light background.-
Dynamics of defects in Ce 3+ doped silica affecting its performance as protective filter in ultraviolet high-power lasers
We investigate defects forming in Ce 3+ -doped fused silica samples following exposure to nanosecond ultraviolet laser pulses and their relaxation as a function of time and exposure to low intensity light at different wavelengths. A subset of these defects are responsible for inducing absorption in the visible and near infrared spectral range, which is of critical importance for the use of this material as ultraviolet light absorbing filter in high power laser systems. The dependence of the induced absorption as a function of laser fluence and methods to most efficiently mitigate this effect are presented. Experiments simulating the operation of the material as a UV protection filter for high power laser systems were performed in order to determine limitations and practical operational conditions.
Theoretical and experimental studies relevant to interpretation of auroral emissions
This report describes the accomplishments of a program designed to develop the tools necessary to interpret auroral emissions measured from a space-based platform. The research was divided into two major areas. The first area was a laboratory study designed to improve our understanding of the space vehicle external environment and how it will affect the space-based measurement of auroral emissions. Facilities have been setup and measurements taken to simulate the gas phase environment around a space vehicle; the radiation environment encountered by an orbiting vehicle that passes through the Earth's radiation belts; and the thermal environment of a vehicle in Earth orbit. The second major area of study was a modeling program to develop the capability of using auroral images at various wavelengths to infer the total energy influx and characteristic energy of the incident auroral particles. An ab initio auroral calculation has been added to the extant ionospheric/thermospheric global modeling capabilities within our group. Once the addition of the code was complete, the combined model was used to compare the relative intensities and behavior of various emission sources (dayglow, aurora, etc.). Attached papers included are: 'Laboratory Facility for Simulation of Vehicle-Environment Interactions'; 'Workshop on the Induced Environment of Space Station Freedom'; 'Radiation Damage Effects in Far Ultraviolet Filters and Substrates'; 'Radiation Damage Effects in Far Ultraviolet Filters, Thin Films, and Substrates'; 'Use of FUV Auroral Emissions as Diagnostic Indicators'; and 'Determination of Ionospheric Conductivities from FUV Auroral Emissions'.
Reflective Filters Design for Self-Filtering Narrowband Ultraviolet Imaging Experiment Wide-Field Surveys (NUVIEWS) Project
We report the design of multilayer reflective filters for the self-filtering cameras of the NUVIEWS project. Wide angle self-filtering cameras were designed to image the C IV (154.9 nm) line emission, and H2 Lyman band fluorescence (centered at 161 nm) over a 20 deg x 30 deg field of view. A key element of the filter design includes the development of pi-multilayers optimized to provide maximum reflectance at 154.9 nm and 161 nm for the respective cameras without significant spectral sensitivity to the large cone angle of the incident radiation. We applied self-filtering concepts to design NUVIEWS telescope filters that are composed of three reflective mirrors and one folding mirror. The filters with narrowband widths of 6 and 8 rim at 154.9 and 161 nm, respectively, have net throughputs of more than 50 % with average blocking of out-of-band wavelengths better than 3 x 10(exp -4)%.
Bandpass filters for the ultraviolet.
UV band pass filter consisting of aluminum film, dielectric stack and its sandwich