Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “UC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Theoretical and Experimental Study of the Spectroscopy and Thermochemistry of UC +/0/–

A combination of high-level ab initio calculations and anion photoelectron detachment (PD) measurements is reported for the UC, UC – , and UC + molecules. To better compare the theoretical values with the experimental photoelectron spectrum (PES), a value of 1.493 eV for the adiabatic electron affinity (AEA) of UC was calculated at the Feller–Peterson–Dixon (FPD) level. The lowest vertical detachment energy (VDE) is predicted to be 1.500 eV compared to the experimental value of 1.487 ± 0.035 eV. A shoulder to lower energy in the experimental PD spectrum with the 355 nm laser can be assigned to a combination of low-lying excited states of UC – and excited vibrational states. The VDEs calculated for the low-lying excited electronic states of UC at the SO-CASPT2 level are consistent with the observed additional electron binding energies at 1.990, 2.112, 2.316, and 3.760 eV. Potential energy curves for the Ω states and the associated spectroscopic properties are also reported. Compared to UN and UN + , the bond dissociation energy (BDE) of UC (411.3 kJ/mol) is predicted to be considerably lower. The natural bond orbitals (NBO) calculations show that the UC 0/+/– molecules have a bond order of 2.5 with their ground-state configuration arising from changes in the oxidation state of the U atom in terms of the 7s orbital occupation: UC (5f 2 7s 1 ), UC – (5f 2 7s 2 ), and UC + (5f 2 7s 0 ). Furthermore, the behavior of the UN and UC sequence of molecules and anions differs from the corresponding sequences for UO and UF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The role of UC inclusions in the development of fission gas bubble superlattice neutron-irradiated monolithic U-10Mo fuels

Uranium Carbide (UC) inclusions are the most prevalent impurities in Uranium-Molybdenum (U-Mo) fuel and are considered undesirable because they could potentially affect fuel performance. This work revealed that, like grain boundaries (gBs), UC inclusions could help facilitate the formation of the fission gas bubble superlattice (GBS). The GBS is a highly organized complex defect structure that can effectively store fission gases, thereby inhibiting fuel swelling. Transmission electron microscopy (TEM) showed that GBS self-organization can initiate at the UC/U-Mo interfaces in U-10Mo fuel irradiated to low fission density. Furthermore, this study also revealed that the UC boundary in U-10Mo irradiated to low fission density is wavy and periodic in morphology and that GBS formation is semi-coherent with the UC boundary. Because the initiation of GBS occurs at gBs and UC/U-Mo interfaces, the fission gas inventory is always highest at those regions compared to the U-Mo grain interior. Consequently, at higher fission densities, it is likely that high burnup structure (HBS) development via grain refinement will begin at gBs and UC/U-Mo interfaces.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Reserve Model of Energy Storage in Day-ahead Joint Energy and Reserve Markets: A Stochastic UC Solution

With many favorable advantages including fast response ability in particular, utility-level energy storage systems (ESS) are being integrated into energy and reserve markets to help mitigate uncertain renewable resources and fluctuant demands. This paper discusses a stochastic unit commitment (UC) model to explore capabilities of ESSs in providing valuable grid services by simultaneously joining energy and reserve markets. The proposed reserve model of ESSs presents the following features: (i) two constraints are proposed to formulate ESS’s reserve provision ability in each hour via six operation modes, namely increasing/reducing the level of charge, switching to discharge, increasing/reducing the level of discharge, switching to charge; (ii) as an energy-limited asset, constraints on ESS’s reserve deliverability across multiple hours is introduced to hold enough state of charge (SOC) headroom and floor room, guaranteeing that reserves cleared in individual hours are continuously deliverable over multiple successive hours without violating operation limits. Furthermore, a scenario-based UC model, which addresses uncertainties of renewables and demands, is adopted to evaluate reserves provided by ESSs and generators. To effectively solve the stochastic UC problem, the progressive hedging algorithm with heuristic approaches is discussed. A 6-bus system and a modified IEEE 118-bus system are used to illustrate effectiveness of the proposed approaches.

25 ENERGY STORAGE↗
DOE OSTI2021

An HPC-Based Hydrothermal Finite Element Simulator for Modeling Underground Geothermal Behavior with Example Simulations on The Treasure Island and UC Berkeley Campus

This submission contains the source code of the Hydrothermal Finite Element Simulator used for the Treasure Island and UC Berkeley campus geothermal simulation. It contains a report that summarizes the development and validation of this Hydrothermal Finite Element Simulator, with a case study on Treasure Island site. It also contains a report that investigates the feasibility of upgrading the existing campus energy delivery system at UC Berkeley to a fifth-generation district heating and cooling system that includes geothermal heat/cold storage.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Bond Energies of UO + and UC + : Guided Ion Beam and Quantum Chemical Studies of the Reactions of Uranium Cation with O 2 and CO

Here, guided ion beam tandem mass spectrometry was used to examine the kinetic energy dependent reactions of U + with O 2 and CO. In the reaction of U + with O 2 , the UO + product is formed in a barrierless and exothermic process with a reaction efficiency at low energies of k/k col =1.1±0.2, but increases at higher collision energies. Formation of both UO + and UC + in the reaction of U + with CO is endothermic. 0 K bond dissociation energies (BDEs) of D 0 (U + -O)=7.88±0.09 eV and D 0 (U + -C)=4.03±0.13 eV were determined by analyzing the kinetic energy dependent cross sections in the latter endothermic reactions. These values are within experimental uncertainty of previously reported experimental values. Additionally, the electronic states of UO + and UC + and the potential energy surfaces for the reactions were explored by quantum chemical calculations. The former include a full Feller-Peterson-Dixon composite approach with correlation contributions up to CCSDT(Q) for UO and UO + , yielding D 0 (U-O)=7.82 eV and D 0 (U + -O)=7.99 eV, as well as more approximate CCSD(T) calculations where a semi-empirical model was used to estimate spin-orbit energy contributions, which are generally found to improve the agreement with experiment. Both experimental BDEs are observed to be close to those of their transition metal congeners, ScL + , YL + , and GdL + (L=O and C).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

NCS Pipeline UC Berkeley Course Overview [Slides]

The criticality safety divisions at Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory (LANL), in partnership with Dr. Max Fratoni of UC Berkeley, taught the fourth annual nuclear criticality safety course during the fall 2021 semester at UC Berkeley. This course is part of a larger pipeline project designed to stimulate student interest in the field of criticality safety.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1993

Space Station UCS antenna pattern computation and measurement

The purpose of this paper is to analyze the interference to the Space Station Ultrahigh Frequency (UHF) Communication Subsystem (UCS) antenna radiation pattern due to its environment - Space Station. A hybrid Computational Electromagnetics (CEM) technique was applied in this study. The antenna was modeled using the Method of Moments (MOM) and the radiation patterns were computed using the Uniform Geometrical Theory of Diffraction (GTD) in which the effects of the reflected and diffracted fields from surfaces, edges, and vertices of the Space Station structures were included. In order to validate the CEM techniques, and to provide confidence in the computer-generated results, a comparison with experimental measurements was made for a 1/15 scale Space Station mockup. Based on the results accomplished, good agreement on experimental and computed results was obtained. The computed results using the CEM techniques for the Space Station UCS antenna pattern predictions have been validated.

Hwu, Shian U.↗
NASA NTRS1972

Examination of UC-ZrC after long term irradiation at thermionic temperature

Two fluoride tungsten clad UC-ZrC fueled capsules, designated as V-2C and V-2D, were examined a hot cell after irradiation in NASA Plum Brook Reactor at a maximum cladding temperature of 1930 K for 11,089 and 12,031 hours to burnups of 3.0 x 10 to the 20th power and 2.1 x 10 to the 20th power fission/c.c. respectively. Percentage of fission gas release from the fuel material was measured by radiochemical means. Cladding deformation, fuel-cladding interaction and microstructures of fuel, cladding, and fuel-cladding interface were studied metallographically. Compositions of dispersions in fuel, fuel matrix and fuel-cladding interaction layer were analyzed by electron microprobe techniques. Axial and radial distributions of burnup were determined by gamma-scan, autoradiography and isotopic burnup analysis. The results are presented and discussed in conjunction with the requirements of thermionic fuel elements for space power application.

Yang, L.↗
DOE OSTI2020

Materials Data on UC by Materials Project

UC1 is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. U4+ is bonded to six equivalent C4- atoms to form a mixture of edge and corner-sharing UC6 octahedra. The corner-sharing octahedral tilt angles are 0°. All U–C bond lengths are 2.47 Å. C4- is bonded to six equivalent U4+ atoms to form a mixture of edge and corner-sharing CU6 octahedra. The corner-sharing octahedral tilt angles are 0°.

36 MATERIALS SCIENCE↗
DOE OSTI2020

UC LANL Postdoc Entrepreneur Fellowship Cohort Four

Three Laboratory postdoctoral researchers have been selected for this year's cohort of Entrepreneur Fellows. The six-month fellowship program - a joint initiative of the University of California and Los Alamos, now in its fourth year - supports early career scientists explore applications and evaluate market opportunities for their technologies. The Lab selects Entrepreneur Fellows based on the potential for their projects to have both scientific and commercial impact. The fellows receive six months of facilitated training and mentoring, as well as funding to engage in customer discovery, market exploration and technology advancement

36 MATERIALS SCIENCE↗
DOE OSTI2021

FY2020 Annual Report on Subcontract B631779 with UC Berkeley: Reactive Precursors Additive Manufacturing Report

This work succeeded in reaching each of the stated milestones for developing, printing, reacting, and characterizing the uranium carbide final products. Leveraging experience gained from creating magnesium oxide inks (milestone #1) and prior reactive precursor work with boron carbide (milestone #2) a uranium carbide reactive precursor ink was developed. The chosen composition of ink utilized a mixture of wax, petrolatum, and stearic acid as the binder. The reactive precursor portion of the ink was comprised of uranium oxide and nano particle activated carbon for production of uranium carbide via carbothermal reduction. Following an in-air burnout of the binder at 160C the printed samples were reacted and sintered at 1750C in an argon environment induction furnace. The resulting product has an open porosity dense, foam-like internal structure with a calculated density of 89% in the solid fraction.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Research at UC Berkeley on the SPICE and HeRALD Dark Matter Experiments (Technical Report for DE-SC0022354)

The McKinsey and Pyle groups have taken on the responsibility to complete a number of critical tasks necessary for the successful completion of the TESSERACT project planning phase. In particular: 1) Transition Edge Sensor testing, characterization, and electromagnetic noise mitigation; 2) Design and testing of the athermal phonon detectors along with vibrational noise characterization and mitigation; 3) Testing and characterization of prototype detectors using silica, sapphire, gallium arsenide, and superfluid helium as detector materials. This grant supported efforts of graduate student Roger Romani toward these goals.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

SUSY 2025 at UC Santa Cruz (Final Technical Report)

The 32nd International Conference on Supersymmetry and the Unification of Fundamental Interactions (SUSY 2025) took place from August 18--23, 2025. During the week preceding the SUSY 2025 conference, the associated pre-SUSY school took place from August 11--15, 2025. Both events were organized and hosted by the Santa Cruz Institute for Particle Physics at the University of California, Santa Cruz. The SUSY 2025 conference brought together theorists and experimentalists specializing in particle physics, astroparticle physics, cosmology, mathematical physics, and string theory to discuss recent developments in these areas, with a focus on theoretical aspects and experimental searches associated with phenomena that lie beyond the Standard Model of particle physics and the standard mathematical framework of modern cosmology. The pre-SUSY school provided advanced pedagogical lectures for graduate students and early-career postdoctoral researchers on many of the foundational topics that were subsequently addressed in the main SUSY 2025 conference that followed. DOE support helped increase accessibility for early-career scientists by covering conference support costs that enabled free participation in the pre-SUSY school and substantially reduced registration fees for students attending the conference.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

UN Synthesis, Fabrication, and Characterization and UC Oxidation Study in support of Advanced LEU Fuel Concepts

Uranium nitride and carbide-based fuels are proposed for use in advanced LEU fuel systems. This report details recent development work to study synthesis, sintering and fabrication methods for single phase UN in monolithic geometries. These samples were intended to support a variety of irradiation testing conditions by tailoring enrichment, geometry, and compositional requirements. Two methods were under evaluation for synthesizing uranium nitride powder – carbothermic reduction-nitridation (CTR-N) of UO 2 powder feedstock and hydride-dehydride/nitridation (HDN) of uranium metal feedstock. Pellets were fabricated from powder feedstocks via conventional pressing and sintering methods. As-fabricated feedstocks and pellets were evaluated via X-ray diffraction (XRD) for phase purity and sintered materials were characterized for density. Both the CTR N and the HDN methods were successfully demonstrated as an effective process for fabricating phase pure UN. Additionally, results from machining efforts for UN are detailed. This report also contains information on a study trying to elucidate the oxidation mechanisms of sintered uranium carbide samples fabricated from feedstock synthesized via an arc-melting method.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Hyperspectral traits (TSWIFT) UC Davis Populus trichocarpa Common Garden

This dataset provides tower-based hyperspectral remote sensing measurements of individualPopulustrees collected with the TSWIFT system to support genetic analyses of canopy photosynthetic traits over time under drought. From 2022-08-18 to 2022-10-18, spectra were repeatedly acquired from the same targeted canopy area of each tree using fixed pointing coordinates. The dataset includes hyperspectral measurements from 400–900 nm and ultraspectral measurements from 730–780 nm. These spectra enable calculation of reflectance-based vegetation indices and other spectral traits, including solar-induced fluorescence (SIF) retrievals from the ultraspectral region. Because measurements were collected exclusively over a drought treatment plot, derived phenotypes are intended for drought-context genetic association and prediction analyses.

09 BIOMASS FUELS↗