Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Turbulent transport”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Analysis of turbulent transport and mixing in transitional Rayleigh–Taylor unstable flow using direct numerical simulation data

Data from a 1152X760X1280 direct numerical simulation (DNS) of a transitional Rayleigh-Taylor mixing layer modeled after a small Atwood number water channel experiment is used to comprehensively investigate the structure of mean and turbulent transport and mixing. The simulation had physical parameters and initial conditions approximating those in the experiment. The budgets of the mean vertical momentum, heavy-fluid mass fraction, turbulent kinetic energy, turbulent kinetic energy dissipation rate, heavy-fluid mass fraction variance, and heavy-fluid mass fraction variance dissipation rate equations are constructed using Reynolds averaging applied to the DNS data. The relative importance of mean and turbulent production, turbulent dissipation and destruction, and turbulent transport are investigated as a function of Reynolds number and across the mixing layer to provide insight into the flow dynamics not presently available from experiments. The analysis of the budgets supports the assumption for small Atwood number, Rayleigh/Taylor driven flows that the principal transport mechanisms are buoyancy production, turbulent production, turbulent dissipation, and turbulent diffusion (shear and mean field production are negligible). As the Reynolds number increases, the turbulent production in the turbulent kinetic energy dissipation rate equation becomes the dominant production term, while the buoyancy production plateaus. Distinctions between momentum and scalar transport are also noted, where the turbulent kinetic energy and its dissipation rate both grow in time and are peaked near the center plane of the mixing layer, while the heavy-fluid mass fraction variance and its dissipation rate initially grow and then begin to decrease as mixing progresses and reduces density fluctuations. All terms in the transport equations generally grow or decay, with no qualitative change in their profile, except for the pressure flux contribution to the total turbulent kinetic energy flux, which changes sign early in time (a countergradient effect). The production-to-dissipation ratios corresponding to the turbulent kinetic energy and heavy-fluid mass fraction variance are large and vary strongly at small evolution times, decrease with time, and nearly asymptote as the flow enters a self-similar regime. The late-time turbulent kinetic energy production-to-dissipation ratio is larger than observed in shear-driven turbulent flows. The order of magnitude estimates of the terms in the transport equations are shown to be consistent with the DNS at late-time, and also confirms both the dominant terms and their evolutionary behavior. Thus, these results are useful for identifying the dynamically important terms requiring closure, and assessing the accuracy of the predictions of Reynolds-averaged Navier-Stokes and large-eddy simulation models of turbulent transport and mixing in transitional Rayleigh-Taylor instability-generated flow.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Turbulent transport regimes and the scrape-off layer heat flux width

Understanding the responsible mechanisms and resulting scaling of the scrape-off layer (SOL) heat flux width is important for predicting viable operating regimes in future tokamaks, and for seeking possible mitigation schemes. Here in this paper, we present a qualitative and conceptual framework for understanding various regimes of edge/SOL turbulence and the role of turbulent transport as the mechanism for establishing the SOL heat flux width. Relevant considerations include the type and spectral characteristics of underlying instabilities, the location of the gradient drive relative to the SOL, the nonlinear saturation mechanism, and the parallel heat transport regime. We find a heat flux width scaling with major radius R that is generally positive, consistent with previous findings [J. W. Connor et al., Nucl. Fusion 39, 169 (1999)]. The possible relationship of turbulence mechanisms to the neoclassical orbit width or heuristic drift mechanism in low (L) -mode and high (H) -mode plasmas is considered, together with implications for future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lagrangian analysis for turbulent transport in variable-density turbulence

In this report Lagrangian analysis of materially conserved scalars is applied to the problem of turbulent transport in variable-density flows. The consequences of an additional material conserved quantity, the density, is generally not acknowledged and leads to significant and meaningfully different expressions for turbulent transport in the moment equations. The formal Lagrangian analysis produces gradient transport expressions substantially different from those obtained by the physically intuitive “argument by analogy” method used in computational models. Various intuitive arguments, in Favre and Reynolds averaged settings, are contrasted to the formal Lagrangian results. Using expressions from the formal analysis, we derive consistent gradient transport closures for the turbulent transport terms that appear in the first- and second-order Favre moment equations. Results for coupled multispecies turbulent transport are given. The analysis is limited to variable-density turbulence in which the dilatation of the fluctuating velocity is small. The results are applicable to turbulent combustion and to stellar convection problems in which the density fluctuations are on the order of the mean density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quenching and anisotropy of hydromagnetic turbulent transport

Hydromagnetic turbulence affects the evolution of large-scale magnetic fields through mean-field effects like turbulent diffusion and the α effect. For stronger fields, these effects are usually suppressed or quenched, and additional anisotropies are introduced. Using different variants of the test-field method, we determine the quenching of the turbulent transport coefficients for the forced Roberts flow, isotropically forced non-helical turbulence, and rotating thermal convection. We see significant quenching only when the mean magnetic field is larger than the equipartition value of the turbulence. Expressing the magnetic field in terms of the equipartition value of the quenched flows, we obtain for the quenching exponents of the turbulent magnetic diffusivity about 1.3, 1.1, and 1.3 for Roberts flow, forced turbulence, and convection, respectively. However, when the magnetic field is expressed in terms of the equipartition value of the unquenched flows, these quenching exponents become about 4, 1.5, and 2.3, respectively. For the α effect, the exponent is about 1.3 for the Roberts flow and 2 for convection in the first case, but 4 and 3, respectively, in the second. In convection, the quenching of turbulent pumping follows the same power law as turbulent diffusion, while for the coefficient describing the Ω×J effect nearly the same quenching exponent is obtained as for α. For forced turbulence, turbulent diffusion proportional to the second derivative along the mean magnetic field is quenched much less, especially for larger values of the magnetic Reynolds number. However, we find that in corresponding axisymmetric mean-field dynamos with dominant toroidal field the quenched diffusion coefficients are the same for the poloidal and toroidal field constituents.

79 ASTRONOMY AND ASTROPHYSICS↗

Turbulent transport stabilization by ICRH minority fast ions in low rotating JET ILW L-mode plasmas

The first experimental demonstration that fast ion induced stabilization of thermal turbulent transport takes place also at low values of plasma toroidal rotation has been obtained in JET ILW (ITER-like wall) L-mode plasmas with high ( 3 He)-D ICRH (ion cyclotron resonance heating) power. A reduction of the gyro-Bohm normalized ion heat flux and higher values of the normalized ion temperature gradient have been observed at high ICRH power and low NBI (neutral beam injection) power and plasma rotation. Gyrokinetic simulations indicate that ITG (ion temperature gradient) turbulence stabilization induced by the presence of high-energetic 3 He ions is the key mechanism in order to explain the experimental observations. Two main mechanisms have been identified to be responsible for the turbulence stabilization: a linear electrostatic wave-fast particle resonance mechanism and a nonlinear electromagnetic mechanism. The dependence of the stabilization on the 3 He distribution function has also been studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Turbulent Transport of Trapped-Electron Modes in Collisionless Plasmas

Global gyrokinetic particle simulations of collisionless trapped-electron mode turbulence in toroidal plasmas find that electron heat transport exhibits a device size scaling with a gradual transition from Bohm to gyro-Bohm scaling. A comprehensive analysis of spatial and temporal scales shows that the turbulence eddies are predominantly microscopic because of zonal flow shearing, but the presence of mesoscale structures drives a nondiffusive component in the electron heat flux due to the weak nonlinear detuning of the precessional resonance that excites the linear instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Turbulent transport of toroidal angular momentum in fusion plasmas

Global nonlinear gyrokinetic simulations of ion temperature gradient (ITG) and collisionless trapped electron mode (CTEM) turbulence find significant spinning up of a plasma in the directions opposite for CTEM and ITG turbulence. The outward momentum convection by the particle flux could be strong enough to overcome the inward momentum pinch and reverse the radial direction of the convective momentum flux. Momentum pinch velocity shows no explicit dependence on background temperature, while it is significantly affected by steepening the background density. Convective momentum fluxes are generally smaller in the CTEM turbulence than the ITG turbulence, while the intrinsic Prandtl number is similar or slightly larger in the CTEM turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MEMORY EFFECTS IN TURBULENT TRANSPORT

In the mean-field theory of magnetic fields, turbulent transport, i.e., the turbulent electromotive force is described by a combination of the alpha effect and turbulent magnetic diffusion, which are usually assumed to be proportional, respectively, to the mean field and its spatial derivatives. For a passive scalar, there is just turbulent diffusion, where the mean flux of concentration depends on the gradient of the mean concentration. However, these proportionalities are approximations that are valid only if the mean field or the mean concentration vary slowly in time. Examples are presented where turbulent transport possesses memory, i.e., where it depends crucially on the past history of the mean field. Such effects are captured by replacing turbulent transport coefficients with time integral kernels, resulting in transport coefficients that depend effectively on the frequency or the growth rate of the mean field itself. In this paper, we perform numerical experiments to find the characteristic timescale (or memory length) of this effect as well as simple analytical models of the integral kernels in the case of passive scalar concentrations and kinematic dynamos. The integral kernels can then be used to find self-consistent growth or decay rates of the mean fields. In mean-field dynamos, the growth rates and cycle periods based on steady state values of alpha effect, and turbulent diffusivity can be quite different from the actual values.

30 DIRECT ENERGY CONVERSION↗

Optimizing Stellarators for Turbulent Transport

Up to now, the term "transport-optimized" stellarators has meant optimized to minimize neoclassical transport, while the task of also mitigating turbulent transport, usually the dominant transport channel in such designs, has not been addressed, due to the complexity of plasma turbulence in stellarators. Here, we demonstrate that stellarators can also be designed to mitigate their turbulent transport, by making use of two powerful numerical tools not available until recently, namely gyrokinetic codes valid for 3D nonlinear simulations, and stellarator optimization codes. A first proof-of-principle configuration is obtained, reducing the level of ion temperature gradient turbulent transport from the NCSX baseline design by a factor of about 2.5.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimizing Stellarators for Turbulent Transport

Up to now, the term ''transport-optimized'' stellarators has meant optimized to minimize neoclassical transport, while the task of also mitigating turbulent transport, usually the dominant transport channel in such designs, has not been addressed, due to the complexity of plasma turbulence in stellarators. Here, we demonstrate that stellarators can also be designed to mitigate their turbulent transport, by making use of two powerful numerical tools not available until recently, namely, gyrokinetic codes valid for 3D nonlinear simulations and stellarator optimization codes. Two initial proof-of-principle configurations are obtained, reducing the level of ion temperature gradient turbulent transport from the National Compact Stellarator Experiment baseline design by a factor of 2-2.5.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Micrometeorological applications of a second-order closure model of turbulent transport

Recent applications of the turbulent transport model originally developed by Donaldson to some problems of practical importance in micrometeorology are discussed. Four particular examples considered are the local boundary layer gust front emanating from a thunderstorm; the low-level wind and turbulent distributions of a tornado; the transport of momentum, heat and species within a surface layer canopy, and longitudinal roll vortices in the unstable planetary boundary layer. Results for the last example are discussed in some detail. Comparisons are made between a one-dimensional and a two-dimensional computation of this phenomenon.

Lewellen, W. S.↗

Mass and momentum turbulent transport experiments with confined swirling coaxial jets

Swirling coaxial jets mixing downstream, discharging into an expanded duct was conducted to obtain data for the evaluation and improvement of turbulent transport models currently used in a variety of computational procedures throughout the combustion community. A combination of laser velocimeter (LV) and laser induced fluorescence (LIF) techniques was employed to obtain mean and fluctuating velocity and concentration distributions which were used to derive mass and momentum turbulent transport parameters currently incorporated into various combustor flow models. Flow visualization techniques were also employed to determine qualitatively the time dependent characteristics of the flow and the scale of turbulence. The results of these measurements indicated that the largest momentum turbulent transport was in the r-z plane. Peak momentum turbulent transport rates were approximately the same as those for the nonswirling flow condition. The mass turbulent transport process for swirling flow was complicated. Mixing occurred in several steps of axial and radial mass transport and was coupled with a large radial mean convective flux. Mixing for swirling flow was completed in one-third the length required for nonswirling flow.

Roback, R.↗

Numerical and Experimental Investigation of Turbulent Transport Control via Shaping of Radial Plasma Flow Profiles

Turbulence, and turbulence-driven transport are ubiquitous in magnetically confined plasmas, where there is an intimate relationship between turbulence, transport, instability driving mechanisms (such as gradients), plasma flows, and flow shear. Though many of the detailed physics of the interrelationship between turbulence, transport, drive mechanisms, and flow remain unclear, there have been many demonstrations that transport and/or turbulence can be suppressed or reduced via manipulations of plasma flow profiles. This is well known in magnetic fusion plasmas [e.g., high confinement mode (H-mode) and internal transport barriers (ITB’s)], and has also been demonstrated in laboratory plasmas. However, it may be that the levels of particle transport obtained in such cases [e.g. H-mode, ITB’s] are actually lower than is desirable for a practical fusion device. Ideally, one would be able to actively feedback control the turbulent transport, via manipulation of the flow profiles. The purpose of this research was to investigate the feasibility of using both advanced model-based control algorithms, as well as non-model-based algorithms, to control cross-field turbulence-driven particle transport through appropriate manipulation of radial plasma flow profiles. The University of New Mexico was responsible for the experimental portion of the project, while our collaborators at the University of Montana provided plasma transport modeling, and collaborators at Lehigh University developed and explored control methods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

How turbulent transport broadens the heat flux width: local SOL production or edge turbulence spreading?

This paper uses data from limited HL-2A Ohmic-plasma to answer the question of how turbulent transport broadens the heat flux width. A key issue in this study is the determination of the origin of scrape-off layer (SOL) turbulence. We develop the concept of the energy production ratio ${R_a}$, which compares the flux of turbulence energy across the last closed flux surface (LCFS) to the net, integrated energy production in the SOL. The flux of turbulence energy (i.e. spreading) is measured directly, using Langmuir probes. Experimental data is used to evaluate ${R_a}$. Results show that usually ${R_a} > 1$, indicating that SOL turbulence is energized primarily by edge turbulence spreading. The exceptions—cases where ${R_a} < 1$—are those with relatively stronger ${\mathbf{E}} \times {\mathbf{B}}$ shear near the LCFS. The latter inhibits both turbulence spreading and local SOL production, but has greater effects on spreading. High blob fraction in the turbulence correlates with large values of ${R_a}$. The implications for heat flux width physics are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Intrinsic Constraints on Asymmetric Turbulent Transport of Scalars Within the Constant Flux Layer of the Lower Atmosphere: CONSTANT FLUX LAYER

A widely used assumption in boundary layer meteorology is the z independence of turbulent scalar fluxes F s throughout the atmospheric surface layer, where z is the distance from the boundary. This assumption is necessary for the usage of Monin-Obukhov Similarity Theory and for the interpretation of eddy covariance measurements of F s when using them to represent emissions or uptake from the surface. It is demonstrated here that the constant flux assumption offers intrinsic constraints on the third-order turbulent transport of F s in the unstable atmospheric surface layer. When enforcing z independence of F s on multilevel F s measurements collected above different surface cover types, it is shown that increasing instability leads to a novel and universal description of (i) the imbalance between ejecting and sweeping eddy contributions to F s and (ii) the ratio formed by a dimensionless turbulent transport of Fs and a dimensionless turbulent transport of scalar variance. When combined with structural models for the turbulent transport of F s , these two findings offer a new perspective on “closing” triple moments beyond conventional gradient diffusion schemes. A practical outcome is a diagnostic of the constant flux assumption from single-level F s measurements.

54 ENVIRONMENTAL SCIENCES↗

Turbulent transport models for scramjet flowfields

Turbulence modeling approaches were examined from the standpoint of their capability to predict the complex flowfield features observed in scramjet combustions. Thus, for example, the accuracy of each turbulence model, with respect to the prediction of recirculating flows, was examined. It was observed that for large diameter ratio axisymmetric sudden expansion flows, a choice of turbulence model was not critical because of the domination of their flowfields by pressure forces. For low diameter ratio axisymmetric sudden expansions and planar backward-facing steps flows, where turbulent shear stresses are of greater significance, the algebraic Reynolds stress approach, modified to increase its sensitivity to streamline curvature, was found to provide the best results. Results of the study also showed that strongly swirling flows provide a stringent test of turbulence model assumptions. Thus, although flows with very high swirl are not of great practical interest, they are useful for turbulence model development. Finally, it was also noted that numerical flowfields solution techniques have a strong interrelation with turbulence models, particularly with the turbulent transport models which involve source-dominated transport equations.

Sindir, M. M.↗