Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TmS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Comparison of Land Cover Information from LANDSAT Multispectral Scanner (MSS) and Airborne Thematic Mapper Simulator (TMS) Data for Hydrologic Applications

Detailed land cover classifications were performed on the Thematic Mapper Simulator (TMS) and MSS data of the Clinton River Basin (acquired on August 19, 1981, and June 28, 1980, respectively) using supervised classification techniques. Differences in interclass separability were compared to select several promising TMS band combinations, selected from the 27 covering the Clinton River Basin. The TMS data produced a more accurate and spatially contiguous classification than MSS for this study site. While the accuracy of the 4-band TM data set was as good as the 7-band, the 3-band TMS data sets were also better than the MSS. These results indicate that both the increased spectral discrimination and spatial resolution contribute to improved classification accuracy. The possibility of reducing the data analysis burden associated with large TM data volumes through effective band selection therefore appears promising. The implications of the improved classification accuracy of TMS data are important for hydrologic and economic modeling. In particular, the higher accuracies for the developed categories (residential and commercial) should improve the predictions of runoff in flood forecasting models and of flood damage for damage calculation models appreciably.

Gervin, J. C.↗
NASA NTRS1985

Comparison of Land Cover Information from LANDSAT Multispectral Scanner (MSS) and Airborne Thematic Mapper Simulator (TMS) Data for Hydrologic Applications

Thematic mapper simulator (TMS) data produced a more accurate and spatially contiguous classification than MSS for the Clinton River Basin in Michigan. While the accuracy of the 4-band TMS data set was as good as the 7-band, the 3-band TMS data sets were also better than the MSS. The combination of bands selected based on the transformed divergence technique provided one band in each of the major regions of the spectrum: visible (band 3), near IR (band 4), middle IR (band 5) and thermal IR (band 7). These results should be viewed with some caution, since the data are from a TMS rather than the actual TM and the MSS data were obtained in early summer while the TMS was flown in late summer. The higher accuracies for the developed categories (residential and commercial) should improve the predictions of runoff in flood forecasting models and of flood damage for damage calculation models appreciably.

Gervin, J. C.↗
NASA NTRS1983

A correlation analysis of percent canopy closure versus TMS spectral response for selected forest sites in the San Juan National Forest, Colorado

The correlation of canopy closure with the signal response of individual thematic mapper simulator (TMS) bands for selected forest sites in the San Juan National Forest, Colorado was investigated. Ground truth consisted of a photointerpreted determination of percent canopy closure of 0 to 100 percent for 32 sites. The sites selected were situated on plateaus at an elevation of approximately 3 km with slope or = 10 percent. The predominant tree species were ponderosa pine and aspen. The mean TMS response per band per site was calculated from data acquired by aircraft during mid-September, 1981. A correlation analysis of TMS response vs. canopy closure resulted in the following correlation coefficients for bands 1 through 7, respectively: -0.757, -0.663, -0.666, -0.088, -0.797, -0.763. Two model regressions were applied to the TMS data set to create a map of predicted percent forest canopy closure for the study area. Results indicated percent predictive accuracies of 71, 74, and 57 for percent canopy closure classes of 0-25, 25-75, and 75-100, respectively.

Butera, M. K.↗
NASA NTRS1984

Teleoperator Maneuvering System (TMS) mission applications and benefits

Studies conducted by NASA have shown that the operating range of the Shuttle can be substantially increased and cost of payload operation be decreased by making use of the Teleoperator Maneuvering System (TMS). The TMS is remotely controlled, free-flying, orbital mini-tug vehicle capable of performing a wide range of remote satellite services missions. It can operate out of the Shuttle cargo bay, from a space station, or on top of an upper stage like Centaur. For high energy missions up to and including geostationary orbit, the TMS propulsion stage will augment the Transfer Orbit Stage (TOS) recently proposed for commercial development in providing an effective low-cost second-stage system for delivering intermediate sized payloads to geosynchronous orbit (GEO). Attention is given to TMS capabilities for both long duration and short term orbital missions, taking into account also Space Station support operations.

Cramblit, D. C.↗
NASA NTRS1979

TMS communications software. Volume 2: Bus interface unit

A data bus communication system to support the space shuttle's Trend Monitoring System (TMS) and to provide a basis for evaluation of the bus concept is described. Installation of the system included developing both hardware and software interfaces between the bus and the specific TMS computers and terminals. The software written for the microprocessor-based bus interface units is described. The software implements both the general bus communications protocol and also the specific interface protocols for the TMS computers and terminals.

Gregor, P. J.↗
NASA NTRS1984

A comparison of the usefulness of canonical analysis, principal components analysis, and band selection for extraction of features from TMS data for landcover analysis

Three feature extraction methods, canonical analysis (CA), principal component analysis (PCA), and band selection, have been applied to Thematic Mapper Simulator (TMS) data in order to evaluate the relative performance of the methods. The results obtained show that CA is capable of providing a transformation of TMS data which leads to better classification results than provided by all seven bands, by PCA, or by band selection. A second conclusion drawn from the study is that TMS bands 2, 3, 4, and 7 (thermal) are most important for landcover classification.

Boyd, R. K.↗
NASA NTRS1985

Comparison of AIS Versus TMS Data Collected over the Virginia Piedmont

The Airborne Imaging Spectrometer (AIS, NS001 Thematic Mapper Simlulator (TMS), and Zeiss camera collected remotely sensed data simultaneously on October 27, 1983, at an altitude of 6860 meters (22,500 feet). AIS data were collected in 32 channels covering 1200 to 1500 nm. A simple atmospheric correction was applied to the AIS data, after which spectra for four cover types were plotted. Spectra for these ground cover classes showed a telescoping effect for the wavelength endpoints. Principal components were extracted from the shortwave region of the AIS (1200 to 1280 nm), full spectrum AIS (1200 to 1500 nm) and TMS (450 to 12,500 nm) to create three separate three-component color image composites. A comparison of the TMS band 5 (1000 to 1300 nm) to the six principal components from the shortwave AIS region (1200 to 1280 nm) showed improved visual discrimination of ground cover types. Contrast of color image composites created from principal components showed the AIS composites to exhibit a clearer demarcation between certain ground cover types but subtle differences within other regions of the imagery were not as readily seen.

Bell, R.↗
NASA NTRS1991

Integration of airborne Thematic Mapper Simulator (TMS) data and digitized aerial photography via an ISH transformation

A simple method for enhancing the spatial and spectral resolution of disparate data sets is presented. Two data sets, digitized aerial photography at a nominal spatial resolution 3,7 meters and TMS digital data at 24.6 meters, were coregistered through a bilinear interpolation to solve the problem of blocky pixel groups resulting from rectification expansion. The two data sets were then subjected to intensity-saturation-hue (ISH) transformations in order to 'blend' the high-spatial-resolution (3.7 m) digitized RC-10 photography with the high spectral (12-bands) and lower spatial (24.6 m) resolution TMS digital data. The resultant merged products make it possible to perform large-scale mapping, ease photointerpretation, and can be derived for any of the 12 available TMS spectral bands.

Ambrosia, Vincent G.↗
DOE OSTI2020

TMS XTRRA experiments on NIF

The study of x-ray induced rapid heating and the resulting material responses - (thermomechanical shock (TMS) and thermo-structural response (TSR)) - is important to our understanding of material behavior in extreme environments. A series of high conversion efficiency (XRCE) x-ray sources have been developed for the NIF laser facility ranging in fluence and spectral content. In conjunction with source development, we have developed a new XTRRA (X-ray Transport and Radiation Response Analysis) test cassette to hold a set of samples, each at equal distance from target chamber center (TCC) where the x-ray source is placed. Design and performance details of the x-ray sources is discussed elsewhere. Here, we describe the development and use of this TMS XTRRA test cassette. The XTRRA test cassette is a snout mounted on a NIF Diagnostic Instrument Manipulator (DIM) designed to position six samples equidistant from the x-ray source to assure uniform irradiation of all samples. Photon Displacement interferometry (PDI) is used to measure the displacement of the rear surface of each sample resulting from x-ray exposure on the front of the sample. This will help determine the x-ray generated impulse on the sample. The samples are retrieved from the snout after the shot for inspection and post-shot analysis including the measurement of sample ablated mass and engineering tests examining changes in the material structure. The data from experiments are compared to predictions from LLNL’s ASC codes and used to inform models implemented in these codes. Thus, XRCE x-ray sources with the XTRRA snout at the National Ignition Facility (NIF) laser at the Lawrence Livermore National Laboratory [1,2] provide the ability to expose a broad range of material samples directly to high x-ray fluence, measure shock transits, and recover the sample for further analysis post-shot.

36 MATERIALS SCIENCE↗
NASA NTRS1979

TMS communications software. Volume 1: Computer interfaces

A prototype bus communications system, which is being used to support the Trend Monitoring System (TMS) as well as for evaluation of the bus concept is considered. Hardware and software interfaces to the MODCOMP and NOVA minicomputers are included. The system software required to drive the interfaces in each TMS computer is described. Documentation of other software for bus statistics monitoring and for transferring files across the bus is also included.

Brown, J. S.↗
NASA NTRS1979

Diagnostic procedures for Trend Monitoring System (TMS) communications

A prototype coaxial cable bus communications sytem was developed to support the trend monitoring system (TMS). Troubleshooting procedures are described at the system level. The procedures can be used by repair personnel to isolate a fault in the TMS and to restore the system to operation by swapping out failed components.

Brown, J. S.↗
NASA NTRS1982

Comparison of Land Cover Information from LANDSAT MSS and Airborne TMS for Hydrological Applications: Preliminary Results

Land cover information for the Clinton River Basin (Michigan) derived from LANDSAT multispectral scanner (MSS) data was compared with that from airborne thematic mapper simulator (TMS) to investigate the probable capabilities of the thematic mapper (TM) launched aboard LANDSAT-4 in July 1982. The preliminary findings for one 7.5 minute topographic map, Mt. Clemens West, are reported. Significant improvements in land cover classification accuracy were obtained using TMS data as compared with MSS data. Overall mapping accuracy increased from 49 to 61 percent with an improvement from 71 to 84 percent in the residential category. A combination of four bands with one band in each major region of the spectrum (visible, near IR, middle IR and thermal IR) provided as good a discrimination of land cover as all seven TM bands. Based on the improved land cover classification accuracy of TM, TM data has the potential to provide more useful and effective input to US Army Corps of Engineers flood forecasting and flood damage prediction/assessment models.

Gervin, J. C.↗
NASA NTRS1984

Remote detection of geobotanical anomalies associated with hydrocarbon microseepage using thematic mapper simulator (TMS) and airborne imaging spectrometer (AIS) data

An interpretation of TMS and AIS data sets collected from Lost River, West Virginia, are presented, along with a brief review of the supervised vegetation classification approach to vegetation mapping used at Lost River. A preliminary study of AIS data suggests that contiguous high-spectral resolution data from a very limited portion of the spectrum (1.2-1.5 micron) provide a greater discriminatory capability than do broad-band sensors such as the TMS covering of wider spectral range (0.45-2.35 microns).

Rock, B. N.↗
NASA NTRS2000

BOREAS Level-0 ER-2 Daedalus TMS Imagery Digital Counts in BIL Format

The level-0 Daedalus Thematic Mapper Simulator (TMS) imagery, along with the other remotely sensed images, was collected to provide spatially extensive information about radiant energy over the primary BOReal Ecosystem-Atmosphere Study (BOREAS) study areas. This information includes detailed land cover and biophysical parameter maps such as fraction of Photosynthetically Active Radiation (fPAR) and Leaf Area Index (LAI). Two flights of the Daedalus TMS instrument were made onboard the ER-2 aircraft on 16-Sep-1994 and 17-Sep-1994.

Newcomer, Jeffrey A.↗
DOE OSTI2020

Materials Data on TmS by Materials Project

TmS is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Tm is bonded to six equivalent S atoms to form a mixture of edge and corner-sharing TmS6 octahedra. The corner-sharing octahedral tilt angles are 0°. All Tm–S bond lengths are 2.72 Å. S is bonded to six equivalent Tm atoms to form a mixture of edge and corner-sharing STm6 octahedra. The corner-sharing octahedral tilt angles are 0°.

36 MATERIALS SCIENCE↗
NASA NTRS1979

TMS communications hardware. Volume 1: Computer interfaces

A prototpye coaxial cable bus communications system was designed to be used in the Trend Monitoring System (TMS) to connect intelligent graphics terminals (based around a Data General NOVA/3 computer) to a MODCOMP IV host minicomputer. The direct memory access (DMA) interfaces which were utilized for each of these computers are identified. It is shown that for the MODCOMP, an off-the-shell board was suitable, while for the NOVAs, custon interface circuitry was designed and implemented.

Brown, J. S.↗
NASA NTRS1979

Trend Monitoring System (TMS) graphics software

A prototype bus communications systems, which is being used to support the Trend Monitoring System (TMS) and to evaluate the bus concept is considered. A set of FORTRAN-callable graphics subroutines for the host MODCOMP comuter, and an approach to splitting graphics work between the host and the system's intelligent graphics terminals are described. The graphics software in the MODCOMP and the operating software package written for the graphics terminals are included.

Brown, J. S.↗