SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
TlC is Tetraauricupride structured and crystallizes in the tetragonal P4mm space group. The structure is two-dimensional and consists of one TlC sheet oriented in the (0, 0, 1) direction. Tl3+ is bonded in a rectangular see-saw-like geometry to four equivalent C3- atoms. All Tl–C bond lengths are 2.43 Å. C3- is bonded in a rectangular see-saw-like geometry to four equivalent Tl3+ atoms.
TlC is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Tl3+ is bonded to six equivalent C3- atoms to form a mixture of edge and corner-sharing TlC6 octahedra. The corner-sharing octahedral tilt angles are 0°. All Tl–C bond lengths are 2.52 Å. C3- is bonded to six equivalent Tl3+ atoms to form a mixture of edge and corner-sharing CTl6 octahedra. The corner-sharing octahedral tilt angles are 0°.
TlC is Tetraauricupride structured and crystallizes in the cubic Pm-3m space group. The structure is three-dimensional. Tl3+ is bonded in a body-centered cubic geometry to eight equivalent C3- atoms. All Tl–C bond lengths are 2.80 Å. C3- is bonded in a body-centered cubic geometry to eight equivalent Tl3+ atoms.
Background: Synthetic biology efforts often require high-throughput screening tools for enzyme engineering campaigns. While innovations in chromatographic and mass spectrometry-based techniques provide relevant structural information associated with enzyme activity, these approaches can require cost-intensive instrumentation and technical expertise not broadly available. Moreover, complex workflows and analysis time can significantly impact throughput. To this end, we develop an automated, 96-well screening platform based on thin layer chromatography (TLC) and use it to monitor in vitro activity of a geranylgeranyl reductase isolated from Sulfolobus acidocaldarius (SaGGR). Results: Unreduced SaGGR products are oxidized to their corresponding epoxide and applied to thin layer silica plates by acoustic printing. These derivatives are chromatographically separated based on the extent of epoxidation and are covalently ligated to a chromophore, allowing detection of enzyme variants with unique product distributions or enhanced reductase activity. Herein, we employ this workflow to examine farnesol reduction using a codon-saturation mutagenesis library at the Leu377 site of SaGGR. We show this TLC-based screen can distinguish between fourfold differences in enzyme activity for select mutants and validated those results by GC–MS. Conclusions: With appropriate quantitation methods, this workflow can be used to screen polyprenyl reductase activity and can be readily adapted to analyze broader catalyst libraries whose products are amenable to TLC analysis.
When utilizing [ 18 F]tetrabutylammonium fluoride ([ 18 F]TBAF) in the synthesis of 18 F-labeled radiotracers for clinical positron emission tomography (PET) imaging, it is necessary to confirm that residual TBA levels in formulated doses do not exceed established specifications (≤2.6 mg per patient dose). Historically this has been accomplished using HPLC, but this is time consuming for short-lived PET radiotracers and limited by the need for expensive equipment. This motivated us to introduce a TLC spot test for determining residual TBA, and we have developed a new method which employs the Dragendorff reagent. Herein we report details of the TLC method and use it to quantify residual TBA in different formulations of 6-[ 18 F]fluoro-DOPA.
Argonne National Laboratory (Argonne) is assisting NorthStar Medical Technologies in the development of a domestic supply of 99 Mo. Specifically, the present study focuses on the production of 99 Mo-feed solution used by the RadioGenix™ 99m Tc generator. During the target-irradiation phase of production, impurities can potentially be introduced into the feed, and can lead to disturbance of ligand- 99m Tc complexation chemistry and contamination of the final radiopharmaceutical that directly interacts with the patient. To address this issue, Argonne performed irradiations and chemical processing to identify whether the potential contamination of He flow with hydrocarbon oil during irradiation affects the radiochemical purity of the final K 2 MoO 4 (K 2 TcO 4 ) in 5M KOH solution. To mimic the conditions of real irradiation at NorthStar, Argonne used its electron linear accelerator and Van de Graaff facilities, heated the target and oil source to >800°C, and controlled oxygen in the presence of He during irradiation. Following irradiation, scanning electron microscopy (SEM) and carbon analysis (CA) were used to detect carbon contamination on the solid targets. The radiochemical purity of the dissolved targets was studied via thin-layer paper chromatography (TLC). As a result of these experiments, small regions of the surface of some irradiated disks were found to be high in carbon, but the total carbon content was still negligible in comparison to the reference sample, which had experienced no irradiation or contact with oil. The summarized results from the SEM, CA, and TLC tests lead to the conclusion that even an excess of oil and heating during irradiation do not affect the radiochemical purity of the final product.
Physical vapor deposition (PVD) provides a route to prepare highly stable and anisotropic organic glasses that are utilized in multi-layer structures such as organic light-emitting devices. While previous work has demonstrated that anisotropic glasses with uniaxial symmetry can be prepared by PVD, here, we prepare biaxially aligned glasses in which molecular orientation has a preferred in-plane direction. With the collective effect of the surface equilibration mechanism and template growth on an aligned substrate, macroscopic biaxial alignment is achieved in depositions as much as 180 K below the clearing point TLC−iso (and 50 K below the glass transition temperature Tg) with single-component disk-like (phenanthroperylene ester) and rod-like (itraconazole) mesogens. The preparation of biaxially aligned organic semiconductors adds a new dimension of structural control for vapor-deposited glasses and may enable polarized emission and in-plane control of charge mobility.
Single-event upset (SEU) cross sections are reduced in 176-layer charge trap (CT) 3-D nand devices under proton irradiation when multiple write operations are applied sequentially without the typical erase-before-write. Here, this effect is observed for multiple data patterns and in both single-level cell (SLC) and triple-level cell (TLC) operating modes. SEU cross section calculation methodologies are discussed for highly scaled 3-D devices both with and without the application of rewrites, and potential implications for long-term endurance effects are proposed.
Comparisons of emerging carbon capture and utilization (CCU) technologies with equivalent incumbent technologies are necessary to support technology developers and to help policy-makers design appropriate long-term incentives to mitigate climate change through the deployment of CCU. In particular, early-stage CCU technologies must prove their economic viability and environmental reduction potential compared to already-deployed technologies. These comparisons can be misleading, as emerging technologies typically experience a drastic increase in performance and decrease in cost and greenhouse gas emissions as they develop from research to mass-market deployment due to various forms of learning. These changes complicate the interpretation of early techno-economic assessments (TEAs) and life cycle assessments (LCAs) of emerging CCU technologies. The effects of learning over time or cumulative production themselves can be quantitatively described using technology learning curves (TLCs). While learning curve approaches have been developed for various technologies, a harmonized methodology for using TLCs in TEA and LCA for CCU in particular is required. To address this, we describe a methodology that incorporates TLCs into TEA and LCA to forecast the environmental and economic performance of emerging CCU technologies. This methodology is based on both an evaluation of the state of the art of learning curve assessment and a literature review of TLC approaches developed in various manufacturing and energy generation sectors. Additionally, we demonstrate how to implement this methodology using a case study on a CO 2 mineralization pathway. Finally, commentary is provided on how researchers, technology developers, and LCA and TEA practitioners can advance the use of TLCs to allow for consistent, high-resolution modeling of technological learning for CCU going forward and enable holistic assessments and fairer comparisons with other climate technologies.
Tea tree oil (TTO) is a volatile essential oil obtained by distillation, mainly from the Australian native plant Melaleuca alternifolia (Maiden & Betche) Cheel (Myrtaceae). In this study, a comparative analysis of the chemical constituents of seven tea tree oils (M. alternifolia) and four other Melaleuca spp. oils (M. cajuputi, (M Ca ), two chemotypes of M. quinquenervia, (M Ne and M Ni ), and M. ericifolia (M Ro )) was carried out using gas chromatography–mass spectrometry (GC-MS) and high-performance thin-layer chromatography (HPTLC). Among the seven TTOs, terpinen-4-ol (37.66–44.28%), γ-terpinene (16.42–20.75%), α-terpinene (3.47–12.62%), α-terpineol (3.11–4.66%), and terpinolene (2.75–4.19%) were the most abundant compounds. On the other hand, the most abundant compounds of the other Melaleuca oils varied, such as 1,8-cineole (64.63%) in M Ca oil, (E)-nerolidol (48.40%) and linalool (33.30%) in M Ne oil, 1,8-cineole (52.20%) in M Ni oil, and linalool (38.19%) and 1,8-cineole (27.57%) in M Ro oil. HPTLC fingerprinting of Melaleuca oils enabled the discrimination of TTO oils from other Melaleuca spp. oils. Variation was observed in the profile of the R f values among EOs. The present study shows that HPTLC is one of the best ways to identify and evaluate the quality control in authenticating TTOs, other Melaleuca EOs, or EOs from other species within the Myrtaceae.