Electric field assisted solid-state interfacial joining of TaC-HfC ceramics without filler
Not provided.
Materials Science↗
SEARCH · Engineering Papers
Results for “TaC”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Investigation of kinetic inductance and microwave loss in thin-film TaC x N 1−x superconducting resonators
The promise of tantalum for realizing superconducting quantum devices has generated interest in its compound films, particularly nitrides. Among these, cubic-phase tantalum carbonitride (TaC x N 1−x ) offers reduced susceptibility to oxidation and a high critical temperature, yet its microwave properties remain largely unexplored. Here, in this study, we investigate plasma-enhanced atomic layer deposition of cubic-phase TaC x N 1−x thin films for superconducting microwave circuits. Structural and transport measurements reveal nanocrystalline morphology with sub-10 nm grains and superconductivity in the dirty limit. Coplanar waveguide resonators exhibit moderately high kinetic inductance (16.8 pH/sq for 30 nm films) with potential for enhancement through dimensional scaling. The films also support high internal quality factors exceeding 10 5 at 50 mK in the single-photon regime, comparable to granular aluminum. Loss analysis identifies the two-level systems as the dominant limiting mechanism, with potential for further reduction through interface engineering. These results establish atomic layer deposited TaC x N 1−x as a promising material for scalable, low-loss, high-inductance superconducting circuits.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Basin-Size Mapping: Prediction of Metastable Polymorph Synthesizability Across TaC–TaN Alloys
The sizes of the basins of attraction on the potential energy surface are helpful indicators in determining the experimental synthesizability of metastable phases. In principle, these basins can be controlled with changes in thermodynamic conditions such as composition, pressure, and surface energy. Herein, we use random structure sampling to computationally study how alloying smoothly perturbs basin of attraction sizes. The TaC 1-x N x pseudobinary is an ideal test system given the structural and polymorphic contrast of its parent compounds and their technological relevance as epitaxial substrates for Al 1-x Ga x N. While we find limited thermodynamic stability across all computationally observed phases, random structure sampling shows a significant composition region where the rocksalt basin dominates. As such, we predict the potential for the nonequilibrium synthesis of metastable rocksalt TaC 1-x N x alloys as substrates for Al 1-x Ga x N. At higher nitrogen concentrations, other low-energy metastable polymorphs emerge that continue to retain the hexagonal close packing suitable for III-N growth. Confidence in these trends was established through uncertainty quantification of the basin sizes and energy distributions; such analysis utilized the Beta and Dirichlet distributions. In conclusion, we also find (a) polymorph basin sizes can be rationalized in terms of energetic preferences for different coordination environments; and (b) basin sizes universally shrink with increasing nitrogen content, making the system more prone to amorphous growth.
36 MATERIALS SCIENCE↗
Materials Data on TaC by Materials Project
TaC is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Ta4+ is bonded to six equivalent C4- atoms to form a mixture of edge and corner-sharing TaC6 octahedra. The corner-sharing octahedral tilt angles are 0°. All Ta–C bond lengths are 2.24 Å. C4- is bonded to six equivalent Ta4+ atoms to form a mixture of edge and corner-sharing CTa6 octahedra. The corner-sharing octahedral tilt angles are 0°.
36 MATERIALS SCIENCE↗
Materials Data on TaC by Materials Project
TaC is Tungsten Carbide structured and crystallizes in the hexagonal P-6m2 space group. The structure is three-dimensional. Ta4+ is bonded to six equivalent C4- atoms to form a mixture of distorted edge, face, and corner-sharing TaC6 pentagonal pyramids. All Ta–C bond lengths are 2.28 Å. C4- is bonded to six equivalent Ta4+ atoms to form a mixture of distorted edge, face, and corner-sharing CTa6 pentagonal pyramids.
36 MATERIALS SCIENCE↗
Materials Data on TaC by Materials Project
TaC is Zincblende, Sphalerite structured and crystallizes in the cubic F-43m space group. The structure is three-dimensional. Ta4+ is bonded to four equivalent C4- atoms to form corner-sharing TaC4 tetrahedra. All Ta–C bond lengths are 2.10 Å. C4- is bonded to four equivalent Ta4+ atoms to form corner-sharing CTa4 tetrahedra.
36 MATERIALS SCIENCE↗
Materials Data on TaC by Materials Project
TaC is Tetraauricupride structured and crystallizes in the cubic Pm-3m space group. The structure is three-dimensional. Ta4+ is bonded in a body-centered cubic geometry to eight equivalent C4- atoms. All Ta–C bond lengths are 2.42 Å. C4- is bonded in a body-centered cubic geometry to eight equivalent Ta4+ atoms.
36 MATERIALS SCIENCE↗
A molecular dynamics study of collisional heat transfer to nanoclusters in the gas phase
Nanoclusters in the gas phase grow by condensation and coagulation, which heat up nanoclusters, creating thermal non-equilibrium with the surrounding gas. The extent of non-equilibrium for nanoclusters is dependent upon the rate of heating relative to the rate of cooling brought about by nanocluster-gas molecule collisions, hence the latter process plays an important role in nanocluster energy evolution during growth. We apply molecular dynamics simulations to investigate heat transfer between metal nanoclusters and gas molecules relevant to high temperature aerosol systems. In analysis, we first define a thermal reemission coefficient (TRC), which is a correction factor for the portion of energy possessed by reemitted gas molecules after collision. Here, the TRC differs from the thermal accommodation coefficient (TAC), which is a correction factor for the maximum possible energy transfer rate from nanoclusters to gas molecules based on the diffusive collision model. We find the TRC is insensitive to nanocluster size but is affected by the nanocluster to gas temperature ratio and the nanocluster to gas atomic mass ratio. Comparison to the traditionally-defined TAC shows that the TAC is insensitive to temperature, a phenomenon that has been widely indicated in literature but not quantitatively explained. We show how the temperature insensitivity of the TAC arises because of the manner in which TRCs vary with both nanocluster and gas temperature, i.e. the manner in which the reemitted gas molecule energy from a surface varies with the temperature of that surface relative to that of the gas. In addition, while calculations ultimately reveal temperature insensitive TACs and justify their continued use in modeling gas-phase heat transfer, we argue that the TRC is more appropriate to calculate a priori in analyzing simulations; it is physically more realistic to first introduce a correction factor solely for the energy of reemitted gas molecules after a collision (as TRCs) instead of a correction factor applying to both the reemission energy and the initial energy (as TACs), as the latter is exactly calculable and independent of nanocluster properties. In line with prior work, for monoatomic gases we find the TAC decreases as the nanocluster to gas atomic mass increases, approaching 0.08 for gold nanoclusters in helium.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
A modular chromosomally integrated toolkit for ectopic gene expression in Vibrio cholerae
The ability to express genes ectopically in bacteria is essential for diverse academic and industrial applications. Two major considerations when utilizing regulated promoter systems for ectopic gene expression are (1) the ability to titrate gene expression by addition of an exogenous inducer and (2) the leakiness of the promoter element in the absence of the inducer. Here, we describe a modular chromosomally integrated platform for ectopic gene expression in Vibrio cholerae . We compare the broadly used promoter elements P tac and P BAD to versions that have an additional theophylline-responsive riboswitch (P tac -riboswitch and P BAD -riboswitch). These constructs all exhibited unimodal titratable induction of gene expression, however, max induction varied with P tac > P BAD > P BAD -riboswitch > P tac -riboswitch. We also developed a sensitive reporter system to quantify promoter leakiness and show that leakiness for P tac > P tac -riboswitch > P BAD ; while the newly developed P BAD -riboswitch exhibited no detectable leakiness. We demonstrate the utility of the tightly inducible P BAD -riboswitch construct using the dynamic activity of type IV competence pili in V. cholerae as a model system. The modular chromosomally integrated toolkit for ectopic gene expression described here should be valuable for the genetic study of V. cholerae and could be adapted for use in other species.
59 BASIC BIOLOGICAL SCIENCES↗
Tailoring Growth Interfaces of Virtual Substrates for Power Electronics
Power electronics materials are poised to play a critical role in fulfilling next generation energy needs, with up to 90% of future energy demand predicted to flow through power electronics at some point.[1] Among a number of candidate materials, AlxGa1-xN is the strongest, having bipolar dopability, thermal and chemical stability, an ultra-wide bandgap, and demonstrated experimental feasibility. However, AlGaN growth is limited by a lack of lattice-matched substrates, ultimately stunting material quality at higher thicknesses needed for power electronics applications. Further, high power applications increasingly call for fully vertical device structures, necessitating a conductive substrate. [1] Recently our group identified the (111) plane of TaC as a conductive surface lattice-matched to Al0.55Ga0.45N, taking inspiration from prior work of AlN and GaN binaries on carbide and boride substrates. [2,3,4] In this talk we demonstrate the growth of (111)-oriented TaC by RF sputtering. We investigate the interface of TaC with sapphire and SiC substrates and identify means to suppress competing Ta2C nucleation in order to stabilize (111)-oriented TaC. Potential stacking sequences are identified with respect to crystal structure and observed twinning in the TaC films. We next assess structural changes and film recrystallization that results from face-to-face annealing of TaC thin films at high temperatures above 1500 degrees Celsius. Changes to grain structure and domain size are assessed by x-ray diffraction and surface morphology is explored using atomic force microscopy. Figure 1 shows significant improvements to in- and out-of-plane strain following annealing along with the formation of terraced step edges at the film surface. Strain as a function of material composition and thickness is considered, as this may play a major role in future nucleation of AlGaN layers.
CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SU↗
Tailoring Growth Interfaces of Virtual Substrates for Power Electronics
Power electronics materials are poised to play a critical role in fulfilling next generation energy needs, with up to 90% of future energy demand predicted to flow through power electronics at some point. AlxGa1-xN ranks high among candidate materials, having bipolar dopability, thermal and chemical stability and an ultra-wide bandgap. However, AlGaN growth is limited by a lack of lattice-matched substrates, ultimately stunting material quality at higher thicknesses needed for power electronics applications. Further, high power applications increasingly call for fully vertical device structures, necessitating a conductive substrate. Recently our group identified the (111) plane of TaC as a conductive surface lattice-matched to Al0.55Ga0.45N, taking inspiration from prior work of AlN and GaN binaries on carbide and boride substrates. In this talk we demonstrate the growth of (111)-oriented TaC by RF sputtering. We investigate the interface of TaC with sapphire and SiC substrates and identify means to suppress competing Ta2C nucleation in order to stabilize (111)-oriented TaC. Potential stacking sequences are identified with respect to crystal structure and observed twinning in the TaC films. We next assess structural changes and film recrystallization that results from face-to-face annealing of TaC thin films at high temperatures above 1500 degrees C. Changes to grain structure and domain size are assessed by x-ray diffraction and surface morphology is explored using atomic force microscopy. Figure 1 shows significant improvements to in- and out-of-plane strain following annealing along with the formation of terraced step edges at the film surface. Strain as a function of material composition and thickness is considered, as this may play a major role in future nucleation of AlGaN layers. (1) R. J. in a face-to-face configuration, as illustrated in the schematic at left. Kaplar et al 2017, ECS J. Solid State Sci. Technol. 6 Q3061; (2) D. M. Roberts et al 2022, https://arxiv.org/abs/2208.11769; (3) T. Aizawa et al 2008, J Crys Growth 310, 1 22; (4) R. Liu et al 2002, Appl. Phys. Lett. 81, 3182-3184.
ENGINEERING↗
Fracture‐Resistant and Thermally Insulating Ultrahigh‐Temperature Carbide Foams
Dense ultrahigh‐temperature ceramics (UHTCs) carbides are recognized as potential materials for thermal protection systems (TPS) owing to properties beyond existing structural materials’ capabilities. Recent advances in UHTCs have enabled the development of multiscale porous microstructures. Herein, it is highlighted that the porosity in UHTCs are no longer treated as a defect but as a functional property specifically tailored for thermal insulation. It is a promising solution to design and fabricate bulk UHTC foams via a freeze‐drying (FD) approach followed by calibrated pressureless spark plasma sintering. Herein, monolithic TaC and HfC UHTC foams and their composite show the partial solid–solution formation of (Ta, Hf)C with porosity ≥50%. TaC–HfC foam (≈80–92 N) shows an intermediate load‐bearing capability compared to monolithic TaC (≈120–135 N) and HfC (≈28–35 N) foams, with no evident cracking on the sample surface. The thermal conductivity of partial solid‐solution TaC–HfC foam increases up to fivefold compared to parent UHTC foams. In the results, solid solutions’ efficacy and pores’ unidirectionality in providing thermal insulation to TaC–HfC while maintaining its high‐load bearing capability are illustrated. In conclusion, the developed technique establishes a new paradigm shift in UHTCs, expanding their potential for TPS in extreme environments.
36 MATERIALS SCIENCE↗
Wood-to-Fuel for California's Transportation Sector using Autothermal Pyrolysis (Progress Report for FRD-17-002)
Accomplishments this period: Subcontract with Frontline BioEnergy, LLC has been executed and is in place (Task 1). List of TAC members is awaiting input from the CEC including any additional members of their own choosing before we finalize confirmation with the listed individuals. This is also holding off on the documented TAC Member commitment, and the DRAFT TAC Meeting Schedule, as we need to know who is approved to be on the TAC before we get commitments and start setting meetings. We are awaiting input from the CEC as to a requested date for the CPR#1. It was originally set for the beginning of July (July 7th), but as the CEC needs to conduct this, we need their input on the revised date. The additional wood feed stock was sent to ISU for analysis of autothermal pyrolysis products on July 15. The Kern refinery continues to express interest in using the bio-oil produced from the demonstration in one or more of their plants. We believe this analysis information will be a critical component of what we share at our first Workshop later this summer
09 BIOMASS FUELS↗
Virtual Substrates for Wide Bandgap AlyX1-yN Growth
Lattice-matched substrates are critical for growth of high quality, compositionally-targeted ternary AlyX1-yN compounds with properties suitable for a wide variety of next-generation opto- and power electronic applications. [DOI:10.1149/2.0111702jss] We have identified the (111) plane of transition metal carbides and nitrides as lattice matched "virtual" substrate layers that have additional benefits of electrical conductivity and appropriate coefficients of thermal expansion for nitride layer at both growth and operating temperatures. [arXiv:2208.11769 2022] In this work, (111)-oriented TaC and ZrN are grown by RF sputtering and optimized as substrate layers for AlyGa1-yN and AlyGd1-yN, respectively. TaC is demonstrated as a full proof of concept. (111)-stabilized TaC layers with a rock-salt crystal structure are annealed to improve surface crystal quality and surface morphology and then used as a template for growth of an Al0.7Ga0.3N layer by molecular beam epitaxy. X-ray diffraction (XRD) demonstrates epitaxial registry of the grown layer to the substrate. High resolution transmission electron microscopy (TEM) is used to investigate interface behavior, showing regions of abrupt interface transitions and nitrogen polar termination of the Al0.7Ga0.3N. We also grew (111)-oriented ZrN on Ti-Zr-N graded buffer layers as a lattice-matched virtual substrate for AlyGd1-yN. Structure, morphology, and strain are analyzed using XRD and atomic force microscopy. Structure and quality of initial Al0.8Gd0.2N thin films are investigated for both in-situ and ex-situ growths.
AlyX1-yN↗
Platinum/Tantalum Carbide Core–Shell Nanoparticles with Sub‐Monolayer Shells for Methanol and Oxygen Electrocatalysis
Abstract Core–shell architectures provide great opportunities to improve catalytic activity, but achieving nanoparticle stability under electrochemical cycling remains challenging. Herein, core–shell nanoparticles comprising atomically thin Pt shells over earth‐abundant TaC cores are synthesized and used as highly durable electrocatalysts for the methanol oxidation reaction (MOR) and the oxygen reduction reaction (ORR) needed to drive direct methanol fuel cells (DMFCs). Characterization data show that a thin oxidic passivation layer protects the TaC core from undergoing dissolution in the fuel cell‐relevant potential range, enabling the use of partially covered Pt/TaC core–shell nanoparticles for MOR and ORR with high stability and enhanced catalytic performance. Specifically, at the anode the surface‐oxidized TaC further enhances MOR activity compared to conventional Pt nanoparticles. At the cathode, the Pt/TaC catalyst feature increases tolerance to methanol crossover. These results show unique synergistic advantages of the core–shell particles and open opportunities to tailor catalytic properties for electrocatalytic reactions.
Chemistry↗
Quantifying health benefits of sustainable aviation fuels: Modeling decreased ultrafine particle emissions and associated impacts on communities near the Seattle-Tacoma International Airport
Exposure to ultrafine particles (UFP, ≤100 nm) is an emerging health concern linked to premature mortality, with jet fuel combustion identified as a significant source of UFPs near airports. Sustainable aviation fuel (SAF) adoption has the potential to reduce aviation-related UFPs and may particularly benefit populations who reside nearby. However, assessing aviation-specific impacts on health remains challenging due to the lack of tools capable of addressing: fine-scale exposure evaluation, novel ambient pollutants, and groups with increased exposure or susceptibility. We develop and apply a method to estimate reductions in mortality associated with aviation-related UFP reductions at the Seattle-Tacoma (SEA-TAC) International Airport under SAF adoption scenarios, with a focus on near-airport communities. Using UFP exposure surfaces generated from AERMOD modeling, flight count data, and UFP measurements, we evaluated UFP reductions under various control scenarios. We estimated mortality reductions by combining this with population data, baseline mortality, and a hazard ratio of 1.012 (95 % confidence interval: 1.010, 1.015) per interquartile range increment of 2723 particles/cm 3 . Our analysis included 412 census tracts representing almost 1.5 million adults. Baseline aviation-related UFP exposures averaged 1145 (SD: 277) particles/cm 3 . The highest baseline concentrations and subsequent reductions under SAF scenarios were near SEA-TAC. Mortality case reductions averaged between 3.1 (95 % range: 2.5–3.7) for a 5 % UFP reduction to 31.0 (24.6–37.4) for a 50 % reduction, with corresponding mortality rate reductions of 0.2 (0.2–0.3) to 2.1 (1.7–2.5) cases per 100,000 people per year. Mortality rate reductions were larger among populations residing closer to SEA-TAC, including those that were Hispanic or Latino, below-poverty, and did not identify as White. Reducing aviation-related UFPs through SAF adoption could lead to lower mortality, particularly in near-airport communities. This reproducible approach can be adapted to other settings to evaluate health benefits from aviation-related UFP reductions.
Aviation-related air pollution↗