Response function generation for Cerenkov radiation production and transport in a TRIGA coolant channel
Not Available
Hearne, Jason A.↗
SEARCH · Engineering Papers
Results for “TRIGA”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An Investigation of Liquefaction in Irradiated TRIGA Fuel Exposed to Relatively High Temperatures
This report presents the findings of an investigation into high temperature fuel cladding chemical interactions (FCCI) in Training, Research, Isotopes, General Atomics (TRIGA) fuel rods. A TRIGA fuel-rod core or meat is principally composed of uranium (U) particles dispersed in a zirconium hydride (Zr H) matrix. The fuel is clad in sealed 304SS or Incoloy 800 tubes. At high temperatures, the fuel will interact with the cladding, resulting in FCCI. To investigate the FCCI (in this case, liquefaction), irradiated TRIGA fuel rods were exposed to relatively high temperatures in furnace tests. The tests were performed at different temperatures using segments from an irradiated TRIGA fuel rod at the Hot Fuel Examination Facility located at Idaho National Laboratory (INL). The data from this study is important for developing a better understanding of the performance of U-ZrH fuel type during transient events (e.g., a Loss of Coolant Accident (LOCA) event) that may result in high temperatures while operating a TRIGA reactor. Furnace tests were run for 6 hours at 730, 800, 900, 950, and 1,000°C. One test was run for 12 hours at 950°C. Post-test microstructural characterization was performed on the heat-treated samples using optical metallography to look for evidence of liquefaction. Additionally, microstructural characterization was performed using scanning electron microscopy to investigate the microstructure of the as-irradiated fuel before heat treatment and the microstructural changes that occurred after heat treating for the 730 and 950°C heat treatments for 6 hours. Results of the analysis were compared to those produced during diffusion studies performed using unirradiated TRIGA fuel meat and type 304 stainless steel. A gap is typically present in as-irradiated fuel that limits any possibility for chemical interaction between the fuel and cladding. Optical metallography (OM) was used to identify areas in the specimens heat treated at 950 and 1000°C where fuel and cladding contact was satisfactory for the FCCI to transpire. The bulk of the interaction zones that form due to FCCI developed in the fuel meat and not as much in the cladding. Even in the sample tested at 1,000°C, no evidence was found that gross fuel meat or cladding melting had occurred. Only limited porosity was found in the fuel meat that possibly could have been due to melting of a particular precipitate phase or phases that had formed during FCCI. These results agreed with those reported for the unirradiated diffusion couple studies.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Modeling of the TRIGA IPR-R1 research reactor with the Serpent2/RINNOVO Nodal core analysis package
The Serpent2/RINNOVO nodal core analysis code system, a dedicated tool for modeling research reactors, has the capability to accurately predict important core physics parameters involved in the safety of reactor operation, such as various reactivity coefficients, control rod and bank worths including the shutdown margin, power distributions as well as local neutron flux predictions at various core locations of high importance, e.g., at irradiation rigs. In this work, a hexagonal model of the unrodded initial core of the Brazilian IPR-R1 Mark I type TRIGA nuclear reactor has been created using the Serpent2/RINNOVO code system. The choice of employing a hexagonal core geometry representation has mainly been made to facilitate subsequent fuel shuffling operations and core follow calculations of this reactor. Numerical results in terms of the core eigenvalue and the assembly power distribution have then been compared against corresponding full core Serpent2 results to prove feasibility of using the Serpent2/RINNOVO code system for modeling small and highly heterogeneous TRIGA reactors. Overall, RINNOVO predicts the power distribution very accurately but the eigenvalue error still remains quite large. In light of being the very first evaluation of a TRIGA reactor with the RINNOVO nodal core simulator, these results are also considered to be very preliminary. Improved accuracy is expected by incorporating a proper methodology in the current code system for computing discontinuity factors for multi-assembly configurations. Furthermore, improved results are expected by increasing the number of energy groups used by RINNOVO in these core calculations.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Computational Optimization of 133m Xe Production via Neutron Irradiation in a TRIGA Reactor
Here, the Comprehensive Nuclear-Test-Ban Treaty bans all nuclear tests worldwide. As part of treaty compliance, the concentration of radioactive nuclides in the atmosphere is monitored to detect nuclear weapons tests. Radioactive noble gas fission products, specifically radioxenon, can vent into the atmosphere after a nuclear weapons test, even if the test is well contained underground or underwater. Radioxenon thus serves as a signal for nuclear weapons tests. All atmospheric monitoring systems require samples of radioxenon isotopes for detector calibration, quality control, and certification. Here, we present a novel, improved method for creating samples of 133m Xe via neutron irradiation of 132 Xe in the Washington State University TRIGA reactor. 132 Xe neutron absorption results in either 133 Xe or 133m Xe—thermal neutron absorption results in 133m Xe 12% of the time, while fast neutron absorption (above ~1 MeV) results in 133m Xe ~50% of the time. To optimize the production of 133m Xe via neutron absorption in 132 Xe in the thermal TRIGA reactor, spectral tuning using an irradiation chamber is required to maximize the fraction of fast neutrons being absorbed and minimize the number of thermal neutrons interacting with the 132 Xe. We used MCNP to tally 132 Xe absorptions with the isotopic tally function, flux tallies and neutron attenuation to estimate the number of neutrons reaching the 132 Xe through the irradiation chamber, and the adjoint importance function to improve the source strength estimate. Additionally, we performed a heat transfer analysis for safety considerations. It was determined that the use of a 96% enriched 10 B boron carbide chamber, placed next to the fuel elements in reactor position D8, increases the 133m Xe/ 133 Xe activity ratio from a baseline value of 0.3 to 1.0, a 233% increase. Additionally, it was determined that the alpha heating produced in the boron does not become an unmanageable problem in the Washington State University reactor.
37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
Application of the bRapid fission matrix burnup methodology to the JSI TRIGA Mark II research reactor
The novel burnup methodology, bRAPID, of the RAPID code system has been applied to the TRIGA Mark II research reactor at the 'Jozef Stefan' Institute. This paper presents the first step in our goal for on-line determination of isotope inventory and burnup, that the RAPID code system with its Fission Matrix (FM) method enables. Burnup analysis of changes in FM coefficients due to TRIGA fuel burnup at different irradiation times and specific power distribution in the reactor core is presented. Our results demonstrate that primary contribution for changes of FM coefficients is the burnup of the destination s, while the spectrum differences, that arise due to fuel's core location, have negligible effect on FM coefficients. (authors)
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Reactor physics benchmark experiments at the JSI TRIGA MARK II reactor - Current status and future outlook
Full text of publication follows. With the development of new high-fidelity computational methods, improvement of nuclear data, and multiphysics modelling, there is an increased need for benchmark experiments to experimentally validate the models, methods and input data. Many of the nuclear facilities designed to perform reactor physics benchmark experiments have been shut down. Therefore, research reactors offer a great opportunity for benchmark experiments, if they are well designed and performed with great care and accuracy. In this presentation we provide an overview of the past and ongoing activities related to benchmark experiments at the Jozef Stefan Institute TRIGA Mark II research reactor. The following experiments have been performed: criticality with fresh fuel, {sup 197}Au(n,γ) and {sup 27}Al(n,α) reaction rates in irradiation channels, absolute and relative {sup 197}Au(n,γ), {sup 235}U(n,f) and {sup 238}U(n,f) reaction rates in the core, burnup, kinetic parameters, control rod worth, isothermal reactivity coefficient, self-shielding, slow and fast (pulse) transients, nuclear heating, delayed and prompt gamma ray production, temperature profiles for multi-physics. Since the existing fleet of research reactors is ageing very rapidly and new experiments are needed, new research reactors should be designed and built to meet the needs of future advanced reactors, education and training, and other technologies in the coming years. We will review planned activities at the JSI TRIGA reactors and plans for the new research reactor in Slovenia. (authors)
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Characterization of Uranium Foil Irradiations at the WSU TRIGA Reactor Using a New Reactor Model in SCALE [Slides]
A depleted uranium foil and a highly enriched uranium foil that were irradiated at the Washington State University TRIGA reactor were used to measure the relative production of 237 U and 239 U, two key isotopes of interest in nuclear forensics, as well as their decay daughters 237 Np and 239 Pu. Total fissions in the two foils were also estimated using 99 Mo measurement. A reactor model of the TRIGA was built in the SCALE neutron transport code using dimensions obtained from an existing MCNP geometry. The model was successfully used to simulate foil fissions and the reaction rate ratios in 238 U, using the laboratory-measured isotope ratios as a benchmark. The flux distribution in the foils was determined. Finally, using the continuous energy Tsunami-3d module of SCALE, a sensitivity/uncertainty analysis was performed to determine the effects on the reaction ratio caused by other reactions in the reactor and by uncertainties in the known cross-sections.
07 ISOTOPE AND RADIATION SOURCES↗
SCALE modeling of foil irradiations at WSU’s TRIGA with sensitivity/uncertainty analysis
We report the Washington State University TRIGA reactor was modeled in the SCALE system’s KENO neutron transport code. The model includes 119 fuel rods, a central boral control rod, 4 control blades, 5 irradiation ports, and 20 graphite reflector blocks within a rectangular aluminum grid box. The model accurately simulated the irradiation of depleted uranium and highly enriched uranium foils and predicted reaction rate ratios for 238 U(n,2n) 237 U / 238 U(n,γ) 239 U and 99 Mo / fission, which compared favorably to empirical values previously measured at Los Alamos. Finally, a sensitivity/uncertainty analysis was performed using the continuous-energy TSUNAMI-3D module of SCALE.
237Np↗
Characterization of Uranium Foil Irradiations at the WSU TRIGA Reactor Using a New Reactor Model in Scale
A new reactor model of the Washington State University TRIGA was developed in the SCALE neutron transport code, and its fidelity was verified by comparison to MCNP and available data for several reactor parameters. The model was used to characterize irradiations designed to produce the short-lived actinides 237 U and 239 U, two key isotopes for nuclear forensics. These short-lived actinides, their decay daughters 237Np and 239Pu, and total fissions (via 99 Mo) were measured in irradiated foils at Los Alamos National Laboratory and other labs with good agreement among parent/daughter pairs and among labs. The laboratory-measured isotope ratios were used as a benchmark for the model determination of reaction rates. The flux distribution in the foils was also determined. Finally, using the continuous energy TSUNAMI-3D module of SCALE, a sensitivity/uncertainty analysis was performed to determine the effects on foil reactions caused by other system-wide reactions and by uncertainties in the known cross-sections.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Post irradiation examination of a uranium-zirconium hydride TRIGA fuel element
Low-enriched (LEU) U-ZrH fuel, with a 235 U content less than 20% of the total uranium, is being evaluated for possible use in different types of reactors, including space nuclear systems, light water reactors (LWRs) and micro-reactors. As a result, it is beneficial to better understand the macrostructural and microstructural changes that occur in this fuel during irradiation. This paper reports the results of the post irradiation examination of an LEU U-ZrH fuel element (30 wt.% U, <20% 235 U) using neutron radiography, precision gamma scanning, chemical analysis, optical metallography and scanning electron microscopy combined with energy dispersive spectroscopy and wavelength dispersive spectroscopy, where the fuel element was irradiated in a Training, Research, Isotope, General Atomics (TRIGA) reactor. Results of microstructural characterization indicated some dehydriding and cracking of the U-ZrH fuel occurred during irradiation; an axial and radial burnup gradient existed in the fuel during irradiation, as measured by gamma scanning and chemical analysis; negligible microstructural changes transpired during irradiation, based on comparison of irradiated and as-fabricated U-ZrH fuel microstructures; and, negligible, fission product-rich, phases could be resolved in a U-ZrH fuel that was irradiated to a calculated 20% depletion of 235 U.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
AFRRI TRIGA Reactor Neutron and Gamma Dose Characterization Preliminary Results
Integral Experiment Request (IER) 484 is part of a series of dose characterization and nuclear accident dosimeter (NAD) exercises performed under the Department of Energy (DOE) Nuclear Criticality Safety Program (NCSP). The Armed Forces Radiobilogy Research Institute (AFRRI) 1.1 MW Training, Research, Isotopes, General Atomics (TRIGA) Mark-F reactor is the third facility to undergo a dose study to establish reference dose values. A preliminary measurement was performed earlier this year, where a variety of foils were irradiated and activation gamma rays were measured using a high-purity germanium (HPGe) detector. The data was taken and analyzed to calculate the neutron spectrum in the irradiation facility. This paper will present preliminary results of the neutron dose measured. The characterization of the AFRRI dose field is planned in August.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Testing of fiber optic based sensors for advanced reactors in the Texas A&M University TRIGA reactor
An Optical Fiber Based Gamma Thermometer has been developed and tested at the Texas A&M University reactor as well as the Ohio State Research Reactor. This sensor technology provides temperature measurement of a thermal mass undergoing gamma heating, from which the gamma flux along the length of the sensor may be calculated. The gamma flux data from an array of OFBGTs could allow the determination of local power density within a nuclear reactor core in three dimensions. The design of the sensor makes use of optical fiber as a truly distributed temperature sensor with a spatial resolution less than 1mm and temperature accuracy of ±1°C. The testing program showed that the system provided the expected temperature data for each location. Overall, this sensor technology shows promise for current Light Water Reactors as well as advanced nuclear reactors by providing an unparalleled level of precision in reactor power measurement.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
A simulation study of the ability to detect power distribution perturbations in the texas A&M TRIGA reactor with self-powered neutron detectors
Given the variety of ways that nuclear reactor core power may be perturbed, reactor operators and developers are keen on understanding the accuracy and convergence time during which perturbations in reactor power distribution may be synthesized (i.e., inferred) from an array of in-core radiation detectors. A simulation study was conducted as described herein using a highly detailed model of the Texas A&M Training, Research, Isotopes, General Atomics Reactor, in which an array of self-powered neutron detectors (SPNDs) was considered for input to the power synthesis methodology. The core power synthesis is conducted using a point-based iterative method with an iterative loop built in to ensure working equation consistency. The forward problem of SPND response to simulated perturbations in reactor power was solved for Gaussian peak-type perturbations in the reactor power distribution. These perturbations varied in variance, amplitude, and core location to assess their impact on synthesis error and to determine the number of iterations required for convergence. A relation between the unique resolvability limit and perturbation width was identified such that the maximum synthesis error increased rapidly when the peak width went beneath this limit (a width approximating half the reactor’s fuel pin-to-pin pitch); this resolvability limit is specific to the SPND configuration and fuel segmentation considered herein. The synthesis error increased linearly with perturbation peak amplitude, whereas the convergence time increased nonlinearly. Perturbations located closer to the center of the core were synthesized more accurately, albeit with a higher number of required iterations. These findings provide a qualitative and quantitative understanding of the accuracy and speed at which different types of spatial power perturbations can be resolved in light-water reactors.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Computationally Optimized Irradiation Chamber Design for Production of 135 Xe in the Washington State University TRIGA Reactor
Not provided.
Nuclear Science & Technology↗
Experiment Logistics for an International Blind Intercomparison Exercise for Nuclear Accident Dosimetry at the Armed Forces Radiobiology Research Institute's TRIGA Reactor
This document is the Experimental Set-up and Design (CED-3a) Report for IER-602, “Dosimetry Exercise with Armed Forces Radiobiology Research Institute (AFRRI) - Exercise” The report discusses the structure of the exercise consisting of three reactor exposures, identifying the participating laboratories and their points of contact. The report also includes details of all dosimetry each laboratory will submit to be placed in proximity to AFRRI on aluminum plates or BOMAB phantoms. Each laboratory lists the counting and spectroscopy equipment to be utilized at AFFRI. The exercise is tentatively scheduled for one week in June, 2024 (FY24 Q4).
42 ENGINEERING↗
Initial Results of the Nuclear Accident Dosimetry Intercomparison at the Armed Forces Radiobiology Research Institute's TRIGA Reactor
This report presents the initial results for IER-602, the international nuclear accident dosimetry intercomparison performed at the Armed Forces Radiobiology Research Institute (AFRRI). Ten groups participated (six DOE laboratories, three international groups, and one DOD group) in a week-long exercise in late June 2024. Two additional groups observed the exercise (one DOE laboratory, one university). Three days of irradiations were performed, and participants reported results within 24 hours of the irradiations. Results were compared to the reference values and performance criteria established by IER-484 AFRRI ER1 Dosimetry Characterization and ANSI/HPS N13.3-2013, respectively. Passing performance varied from 17% to 100%, with an average of 67%.
61 RADIATION PROTECTION AND DOSIMETRY↗
Updated Results of the Nuclear Accident Dosimetry Intercomparison at the Armed Forces Radiobiology Research Institute’s TRIGA Reactor (IER-602 CED-4a Report)
The IER-602 3b document (Angus, et al. 2024) reported the initial, 24-hour results of the international nuclear accident intercomparison, which took place at the Armed Forces Radiobiological Research Institute during June 24-28, 2024. This report provides updated results and further analysis of the intercomparison.
61 RADIATION PROTECTION AND DOSIMETRY↗
USABILITY EXTENSION OF THE ŠKODA VPVR/M CASK FOR TRANSPORTING IRRADIATED FUEL ASSEMBLIES
New abstract from the final version being submitted now: This paper discusses the evolution and enhanced usability of the ŠKODA VPVR/M cask for the transport of irradiated fuel assemblies, particularly within the context of the demand for the delivery of newly appearing irradiated HEU fuel types for which the cask did not yet have a license to transport. Over time, the cask’s internal basket construction has demonstrated notable adaptability to accommodate various exotic HEU fuel types from research reactors of differing origins. The paper outlines sever-al custom internal baskets developed for specific fuel types, including those from Belarus and Serbia, as well as from Georgia, Uzbekistan, and MNSR cores, as well as a recently designed basket for MTR and TRIGA assemblies. The findings high-light the high flexibility and adaptability of the cask, supported by successful rede-signs and licensing efforts, underscoring its value for the safe and secure transport of nuclear material. Old abstract from the draft version that was already approved: The Russian Research Reactor Fuel Return (RRRFR) program, since its inception, has continuously used the ŠKODA VPVR/M Cask fleet designed for the repatriation of irradiated highly enriched uranium (HEU) fuel. As the program progressed (from shut-down and a quasi-abandoned reactor, and/or as it began to include fuels of Chinese and US origin), new challenges emerged for the transport Cask. These were fuel types that had not yet been licensed for the Cask. Although these requirements did not arise during the design of the basic ŠKODA VPVR/M Cask, as revealed by the retrospective analyses, the Internal Basket of the ŠKODA VPVR/M Cask gives a high degree of flexibility to accommodate additional fuel types. This paper provides a brief overview of the ŠKODA VPVR/M Cask, which holds a B(U) type license, and introduces the different types of Internal Baskets that have already been licensed to transport so-called exotic irradiated HEU fuel types, in addition to the original license. The paper presents a new Internal Basket design for accommodating MTR-type and TRIGA-type irradiated HEU fuel assemblies. This includes a detailed presentation of the design basis and the new MTR-TRIGA Internal Basket, as well as the licensing matters of the package under the name ŠKODA MTR-TRIGA Cask, and the conformity test (dry- and wet-run) operations made to verify compliance with the new Internal Basket. Then, as a summary, the usage record for the Cask fleet is presented, and finally, the paper concludes with the consolidated experiences gained during the utilization of the ŠKODA VPVR/M Cask fleet, emphasizing the high degree of Cask flexibility ensured by the Internal Basket’s construction.
42 - ENGINEERING↗