Engineering PapersSearch

SEARCH · Engineering Papers

Results for “TRANSPORT EQUATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Predictions of Separated and Transitional Boundary Layers Under Low-Pressure Turbine Airfoil Conditions Using an Intermittency Transport Equation

A new transport equation for the intermittency factor was proposed to predict separated and transitional boundary layers under low-pressure turbine airfoil conditions. The intermittent behavior of the transitional flows is taken into account and incorporated into computations by modifying the eddy viscosity, mu(sub t), with the intermittency factor, gamma. Turbulent quantities are predicted by using Menter's two-equation turbulence model (SST). The intermittency factor is obtained from a transport equation model, which not only can reproduce the experimentally observed streamwise variation of the intermittency in the transition zone, but also can provide a realistic cross-stream variation of the intermittency profile. In this paper, the intermittency model is used to predict a recent separated and transitional boundary layer experiment under low pressure turbine airfoil conditions. The experiment provides detailed measurements of velocity, turbulent kinetic energy and intermittency profiles for a number of Reynolds numbers and freestream turbulent intensity conditions and is suitable for validation purposes. Detailed comparisons of computational results with experimental data are presented and good agreements between the experiments and predictions are obtained.

Suzen, Y. Bora

Predictions of Separated and Transitional Boundary Layers Under Low-Pressure Turbine Airfoil Conditions Using an Intermittency Transport Equation

A new transport equation for the intermittency factor was proposed to predict separated and transitional boundary layers under low-pressure turbine airfoil conditions. The intermittent behavior of the transitional flows is taken into account and incorporated into computations by modifying the eddy viscosity, t , with the intermittency factor, y. Turbulent quantities are predicted by using Menter s two-equation turbulence model (SST). The intermittency factor is obtained from a transport equation model, which not only can reproduce the experimentally observed streamwise variation of the intermittency in the transition zone, but also can provide a realistic cross-stream variation of the intermittency profile. In this paper, the intermittency model is used to predict a recent separated and transitional boundary layer experiment under low pressure turbine airfoil conditions. The experiment provides detailed measurements of velocity, turbulent kinetic energy and intermittency profiles for a number of Reynolds numbers and freestream turbulent intensity conditions and is suitable for validation purposes. Detailed comparisons of computational results with experimental data are presented and good agreements between the experiments and predictions are obtained.

Suzen, Y. B.

Modeling of Flow Transition Using an Intermittency Transport Equation

A new transport equation for intermittency factor is proposed to model transitional flows. The intermittent behavior of the transitional flows is incorporated into the computations by modifying the eddy viscosity, mu(sub t), obtainable from a turbulence model, with the intermittency factor, gamma: mu(sub t, sup *) = gamma.mu(sub t). In this paper, Menter's SST model (Menter, 1994) is employed to compute mu(sub t) and other turbulent quantities. The proposed intermittency transport equation can be considered as a blending of two models - Steelant and Dick (1996) and Cho and Chung (1992). The former was proposed for near-wall flows and was designed to reproduce the streamwise variation of the intermittency factor in the transition zone following Dhawan and Narasimha correlation (Dhawan and Narasimha, 1958) and the latter was proposed for free shear flows and was used to provide a realistic cross-stream variation of the intermittency profile. The new model was used to predict the T3 series experiments assembled by Savill (1993a, 1993b) including flows with different freestream turbulence intensities and two pressure-gradient cases. For all test cases good agreements between the computed results and the experimental data are observed.

Suzen, Y. B.

Solving Two-Equation Turbulence Models With a Perspective on Solving Transport Equations

There are three principal objectives of this report. The first objective is to investigate frequently used two-equation models when solving the RANS equations. In this study, we consider the 2006Wilcox and the 2003 Menter Shear Stress Transport (SST) models. Also, a simple change of the Wilcox model is introduced to improve computational predictions for transonic flows. Computations for flows over two different airfoils are examined to compare these turbulence models. Effects on modeling the physics of each flow due to variations in the models, such as using either strainrate or vorticity in the turbulence production term, are considered and discussed. The second objective of this report is to not only explore but also evaluate the performance of the solution algorithm for the mean flow and the transport equations. The RANS and turbulence modeling equations aresolved in a weakly coupled manner with a diagonal implicit Runge-Kutta (DIRK) solution algorithm. Throughout this report, emphasis is given to reducing the residuals to machine zero in all flow calculations, so as to eliminate the error due to numerical integration of the discrete governing equations. The final objective is to provide a perspective on solving transport equations for turbulence modeling. Aspects of solving such stiff systems of equations, as well as various numerical difficulties and possible techniques to overcome them, are considered. Discussion is also provided concerning what is called ’numerical compatibility’, which is an essential requirement when designing a solution algorithm for solving transport equations.

turbulence modeling

Analytical Theory of the Destruction Terms in Dissipation Rate Transport Equations

Modeled dissipation rate transport equations are often derived by invoking various hypotheses to close correlations in the corresponding exact equations. D. C. Leslie suggested that these models might be derived instead from Kraichnan's wavenumber space integrals for inertial range transport power. This suggestion is applied to the destruction terms in the dissipation rate equations for incompressible turbulence, buoyant turbulence, rotating incompressible turbulence, and rotating buoyant turbulence. Model constants like C(epsilon 2) are expressed as integrals; convergence of these integrals implies the absence of Reynolds number dependence in the corresponding destruction term. The dependence of C(epsilon 2) on rotation rate emerges naturally; sensitization of the modeled dissipation rate equation to rotation is not required. A buoyancy related effect which is absent in the exact transport equation for temperature variance dissipation, but which sometimes improves computational predictions, also arises naturally. Both the presence of this effect and the appropriate time scale in the modeled transport equation depend on whether Bolgiano or Kolmogorov inertial range scaling applies. A simple application of these methods leads to a preliminary, dissipation rate equation for rotating buoyant turbulence.

Rubinstein, Robert

A unified transport equation for both cosmic rays and thermal particles

We present a unified transport equation that is valid for particles of all energies if the particle mean free paths are much smaller than macroscopic fluid length scales. If restricted to particles with random speeds much greater than fluid flow speeds, this equation reduces to the previously discussed extended cosmic-ray transport equation. It is significant that this allows one to describe the acceleration of particles from thermal energies to cosmic-ray energies using one transport equation. This is in contrast to previous transport equations (the Parker equation and the extended cosmic-ray transport equation), which were restricted to fast particles. The close connection to the extended cosmic-ray transport equation is demonstrated.

Williams, L. L.

Transition Analysis for the CRM-NLF Wind Tunnel Configuration using Transport Equation Models and Linear Stability Correlations

Transition models based on auxiliary transport equations augmenting the Reynolds-averaged Navier-Stokes (RANS) framework rely upon transition correlations that were derived from a limited number of low-speed experiments. Furthermore, these models often account for only a subset of the relevant transition mechanisms and/or cannot accurately predict the sensitivity of those mechanisms to the changes in significant flow parameters. A preceding investigation had targeted the assessment of the transport-equation-based transition models in NASA's OVERFLOW 2.3b solver, namely, the amplification factor transport (AFT-2017b) equation model coupled with the Spalart-Allmaras RANS model and the Langtry-Menter transition models (LM2009 without crossflow effects and LM2015 including the modeling of crossflow transition) implemented with Menter’s shear-stress transport equation (SST2003) RANS model. Comparisons with recent measurements at transonic freestream conditions on the Common Research Model with Natural Laminar Flow (CRM-NLF) reinforced our earlier finding that all three of the above models significantly underpredict the reported extent of the laminar flow region over the entire span of the wing, regardless of the dominant instability mechanism(s) underlying the onset of the transition process. The underprediction of the laminar flow extent was attributed to the failure of the above models in accounting for the stabilizing effect of compressibility on the amplification of Tollmien-Schlichting instabilities. Based on previous linear stability studies related to compressibility effects, the present work proposes modifications to the two classes of transition models that reduce to the original form of each model at low subsonic speeds and do not require any nonlocal flow information or additional transport equation(s). The modifications are shown to significantly improve the predicted laminar extent of the flow and compare well against the data from the CRM-NLF experiment. Additionally, a previous assessment of transition prediction based on the dual, nonparallel N -factor method in conjunction with linear parabolized stability equations (PSE) is extended to additional angles of attack to provide the first comprehensive assessment of transition models based on nonparallel disturbance amplification over the CRM-NLF. In general, the transition criterion based on the dual, nonparallel N-factor method with N TS = N CF = 6 is reasonably successful at correlating with the measured transition fronts at R eMAC = 15 million for all angles of attack investigated herein and provides additional validation of the improved predictions from the compressibility-corrected transition models.

CFD modeling

Transition Analysis for the CRM-NLF Wind Tunnel Configuration using Transport Equation Models and Linear Stability Correlations

Transition models based on auxiliary transport equations augmenting the Reynolds-averaged Navier-Stokes (RANS) framework rely upon transition correlations that were derived from a limited number of low-speed experiments. Furthermore, these models often account for only a subset of the relevant transition mechanisms and/or cannot accurately predict the sensitivity of those mechanisms to the changes in significant flow parameters. A preceding investigation had targeted the assessment of the transport-equation-based transition models in NASA's OVERFLOW 2.3b solver, namely, the amplification factor transport (AFT-2017b) equation model coupled with the Spalart-Allmaras RANS model and the Langtry-Menter transition models (LM2009 without crossflow effects and LM2015 including the modeling of crossflow transition) implemented with Menter’s shear-stress transport equation (SST2003) RANS model. Comparisons with recent measurements at transonic freestream conditions on the Common Research Model with Natural Laminar Flow (CRM-NLF) reinforced our earlier finding that all three of the above models significantly underpredict the reported extent of the laminar flow region over the entire span of the wing, regardless of the dominant instability mechanism(s) underlying the onset of the transition process. The underprediction of the laminar flow extent was attributed to the failure of the above models in accounting for the stabilizing effect of compressibility on the amplification of Tollmien-Schlichting instabilities. Based on previous linear stability studies related to compressibility effects, the present work proposes modifications to the two classes of transition models that reduce to the original form of each model at low subsonic speeds and do not require any nonlocal flow information or additional transport equation(s). The modifications are shown to significantly improve the predicted laminar extent of the flow and compare well against the data from the CRM-NLF experiment. Additionally, a previous assessment of transition prediction based on the dual, nonparallel N -factor method in conjunction with linear parabolized stability equations (PSE) is extended to additional angles of attack to provide the first comprehensive assessment of transition models based on nonparallel disturbance amplification over the CRM-NLF. In general, the transition criterion based on the dual, nonparallel N-factor method with N TS = N CF = 6 is reasonably successful at correlating with the measured transition fronts at R eMAC = 15 million for all angles of attack investigated herein and provides additional validation of the improved predictions from the compressibility-corrected transition models.

CFD modeling

The absence of ray-effects in the discrete ordinate solution to the transport equation in spherical coordinates in multi-dimensions

The streaming operator of the transport equation is derived for spherical coordinates by starting from Newton’s second law for a free particle expressed in spherical coordinates. We shall show that the partial derivatives with respect to the velocity variables of the particle, which are absent in the Cartesian coordinate formulation of the transport equation, arise in the spherical coordinate formulation of the transport equation in response to the centrifugal force which prevents a free particle from ‘falling into the origin’ of the coordinate system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC

Transport equations for multicomponent anisotropic space plasmas - A review

An attempt is made to present a unified approach to the study of transport phenomena in multicomponent anisotropic space plasmas. In particular, a system of generalized transport equations is presented that can be applied to widely different plasma flow conditions. The generalized transport equations can describe subsonic and supersonic flows, collision-dominated and collisionless flows, plasma flows in rapidly changing magnetic field configurations, multicomponent plasma flows with large temperature differences between the interacting species, and plasma flows that contain anisotropic temperature distributions. In addition, if Maxwell's equations of electricity and magnetism are added to the system of transport equations, they can be used to model electrostatic shocks, double layers, and magnetic merging processes. These transport equations also contain terms which act to regulate both the heat flow and temperature anisotropy, processes which appear to be operating in the solar wind.

Barakat, A. R.

Transport of gyration-dominated space plasmas of thermal origin. I - Generalized transport equations

Grad's 20-moment set of transport equations has been examined in the limit of strong external magnetic fields. This simplified set of equations describes the transport of mass and parallel momentum as well as the transport of parallel and perpendicular energy and heat flow in the magnetic field direction. The effect of collisions was calculated assuming a modified relaxation model. Wave speeds and normal modes of the simplified set of equations were examined for an ion and electron gas. It was found that four of the ten normal modes are electron thermal-heat waves which approximately decouple from the six ion waves in the system. When low-frequency waves are considered (slow-wave approximation), this allows the electron energy and heat flow equations to be solved separately from the ion equations and in a time-independent fashion. When this was done, it was found that, under certain conditions, these equations predict an infinite electron perpendicular temperature, Te-perpendicular, in the collisionless regime. This occurs whenever Te-perpendicular is greater than the parallel temperature, at any point along collisionless and diverging magnetic field lines. When applied appropriately, the significantly simplified set of equations derived here are well suited for application to a large variety of problems in planetary ionospheres and magnetospheres.

Gombosi, Tamas I.

A transport equation for eddy viscosity

A transport equation for eddy viscosity is proposed for wall bounded turbulent flows. The proposed model reduces to a quasi-homogeneous form far from surfaces. Near to a surface, the nonhomogeneous effect of the wall is modeled by an elliptic relaxation model. All the model terms are expressed in local variables and are coordinate independent; the model is intended to be used in complex flows. Turbulent channel flow and turbulent boundary layer flows with/without pressure gradient are calculated using the present model. Comparisons between model calculations and direct numerical simulation or experimental data show good agreement.

Durbin, P. A.

The Dissipation Rate Transport Equation and Subgrid-Scale Models in Rotating Turbulence

The dissipation rate transport equation remains the most uncertain part of turbulence modeling. The difficulties arc increased when external agencies like rotation prevent straightforward dimensional analysis from determining the correct form of the modelled equation. In this work, the dissipation rate transport equation and subgrid scale models for rotating turbulence are derived from an analytical statistical theory of rotating turbulence. In the strong rotation limit, the theory predicts a turbulent steady state in which the inertial range energy spectrum scales as k(sup -2) and the turbulent time scale is the inverse rotation rate. This scaling has been derived previously by heuristic arguments.

Rubinstein, Robert

Solutions to bi-Maxwellian transport equations for SAR-arc conditions

The first subsonic solutions of the bi-Maxwellian-based 16-moment set of transport equations for stable auroral red (SAR) arc conditions are presented. These are compared with the solutions obtained from the Maxwellian-based 13-moment transport equations for the same boundary conditions. Close agreement between the 16-moment and 13-moment solutions was obtained for the drift velocity, total electron temperature, total proton heat flow, and total electron heat flow profiles. On the other hand, significant discrepancies were found. Thus, the 16-moment density profile falls off more rapidly with increasing altitude than that computed with the 13-moment equations; the total proton temperature is less in the 16-moment case than in the 13-moment case by several thousand degrees at most altitudes; and differences exist in the ratios of the proton and electron temperature anisotropies with the altitude. A simplified set of transport equations was obtained by dropping terms which remain relatively small at all altitudes.

Demars, H. G.

Comparison of transport equations based on Maxwellian and bi-Maxwellian distributions for anisotropic plasmas

A wide variety of plasma flow conditions is found in aeronomy and space plasma physics. Transport equations based on an isotropic Maxwellian vilecity distribution function can be used to describe plasma flows which contain 'small' temperature anisotropies. However, for plasma flows characterized by large temperature anisotropies, transport equations based on an anisotropic bi-Maxwellian (or two-temperature) velocity distribution function are expected to provide a much better description of the plasma transport properties. The present investigation is concerned with the extent to which transport equations based on both Maxwellian and bi-Maxwellian series expansions can describe plasma flows characterized by non-Maxwellian velocity distributions, giving particular attention to a modelling of the anisotropic character of the distribution function. The obtained results should provide clues as to the extent to which a given series expansion can account for the anisotropic character of a plasma.

Barakat, A. R.