Ratios of steady-state responses to various transient responses, both having equal maximum excitation levels
Ratio of equilibrium responses to transient responses both having equal excitation levels
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ratio of equilibrium responses to transient responses both having equal excitation levels
Transient Response Analysis Program, TRAP aids in analysis of frequency response of force-transmission and shock-damping devices. Devices analyzed with TRAP include hydraulic actuators, automotive shock absorbers and electromechanical actuators.
Commercial cadmium telluride (CdTe) photovoltaic (PV) modules from three different manufacturers were monitored for performance changes during indoor and outdoor light-exposure. Short-term transients in Voc were recorded on some modules, with characteristic times of ~1.1 hours. Outdoor performance data shows a similar drop in Voc after early morning light exposure. Preliminary analysis of FF changes show light-induced changes on multiple time scales, including a long time scale.
A methodology that supports forced transient response dynamic solutions when both static and kinetic friction effects are included in a structural system model is described. Modifications that support this type of nonlinear transient response solution are summarized for the transient response dynamics (TRD) NASTRAN module. An overview of specific modifications for the NASTRAN processing subroutines, INITL, TRD1C, and TRD1D, are described with further details regarding inspection of nonlinear input definitions to define the type of nonlinear solution required, along with additional initialization requirements and specific calculation subroutines to successfully solve the transient response problem. The extension of the basic NASTRAN nonlinear methodology is presented through several stages of development to the point where constraint equations and residual flexibility effects are introduced into the finite difference Newmark-Beta recurrsion formulas. Particular emphasis is placed on cost effective solutions for large finite element models such as the Space Shuttle with friction degrees of freedom between the orbiter and payloads mounted in the cargo bay. An alteration to the dynamic finite difference equations of motion is discussed, which allows one to include friction effects at reasonable cost for large structural systems such as the Space Shuttle. Data are presented to indicate the possible impact of transient friction loads to the payload designer for the Space Shuttle. Transient response solution data are also included, which compare solutions without friction forces and those with friction forces for payloads mounted in the Space Shuttle cargo bay. These data indicate that payload components can be sensitive to friction induced loads.
Transient response from Liapunov stability equation
Transient response from Liapunov stability equation
Transient response of multistage space vehicle to external load
An analytical and computerized study of the steady state and transient response of a phosphoric acid fuel cell (PAFC) system was completed. Parametric studies and sensitivity analyses of the PAFC system's operation were accomplished. Four non-linear dynamic models of the fuel cell stack, reformer, shift converters, and heat exchangers were developed based on nonhomogeneous non-linear partial differential equations, which include the material, component, energy balance, and electrochemical kinetic features. Due to a lack of experimental data for the dynamic response of the components only the steady state results were compared with data from other sources, indicating reasonably good agreement. A steady state simulation of the entire system was developed using, nonlinear ordinary differential equations. The finite difference method and trial-and-error procedures were used to obtain a solution. Using the model, a PAFC system, that was developed under NASA Grant, NCC3-17, was improved through the optimization of the heat exchanger network. Three types of cooling configurations for cell plates were evaluated to obtain the best current density and temperature distributions. The steady state solutions were used as the initial conditions in the dynamic model. The transient response of a simplified PAFC system, which included all of the major components, subjected to a load change was obtained. Due to the length of the computation time for the transient response calculations, analysis on a real-time computer was not possible. A simulation of the real-time calculations was developed on a batch type computer. The transient response characteristics are needed for the optimization of the design and control of the whole PAFC system. All of the models, procedures and simulations were programmed in Fortran and run on IBM 370 computers at Cleveland State University and the NASA Lewis Research Center.
The equations of motion necessary to calculate the transient response of a multimass flexible rotor supported by nonlinear, damped bearings are derived from energy principles. Rotor excitation may be the result of imbalance, internal friction, rotor acceleration, nonlinear forces due to any number of bearing or seal stations, and gyroscopic couples developed from skewed disk effects. The method of solution for transient response simulation is discussed in detail and is based on extensive evaluation of numerical methods available for transient analysis. Examples of the application of transient response for the analysis of rotor bearing systems are presented and compared to actual machine performance. Recommendations for the use and extension of the present system simulation model are discussed.
A proposed transient response method is formulated for the liftoff analysis of the space shuttle vehicles. It uses a power series approximation with unknown coefficients for the interface forces between the space shuttle and mobile launch platform. This allows the equation of motion of the two structures to be solved separately with the unknown coefficients at the end of each step. These coefficients are obtained by enforcing the interface compatibility conditions between the two structures. Once the unknown coefficients are determined, the total response is computed for that time step. The method is validated by a numerical example of a cantilevered beam and by the liftoff analysis of the space shuttle vehicles. The proposed method is compared to an iterative transient response analysis method used by Martin Marietta for their space shuttle liftoff analysis. It is shown that the proposed method uses less computer time than the iterative method and does not require as small a time step for integration. The space shuttle vehicle model is reduced using two different types of component mode synthesis (CMS) methods, the Lanczos method and the Craig and Bampton CMS method. By varying the cutoff frequency in the Craig and Bampton method it was shown that the space shuttle interface loads can be computed with reasonable accuracy. Both the Lanczos CMS method and Craig and Bampton CMS method give similar results. A substantial amount of computer time is saved using the Lanczos CMS method over that of the Craig and Bampton method. However, when trying to compute a large number of Lanczos vectors, input/output computer time increased and increased the overall computer time. The application of several liftoff release mechanisms that can be adapted to the proposed method are discussed.
Transient response of coupled acoustic cavity resonators
In this report the Standard SCR reaction catalyzed by Cu-SSZ-13 is a redox process consisting of a reduction half cycle (RHC) and an oxidation half cycle (OHC) that cycle the active Cu sites between the Cu(II) and Cu(I) states. In the current work, a transient-response methodology consisting of experimental transient response Cu-redox (TRCR) measurements and kinetic modeling was developed for detailed study of individual SCR Cu-redox half cycles. The TRCR protocol allows quantification of the reducible Cu density, Cu(II)-Cu(I) partitioning, relative native RHC and OHC rates, and limiting half cycle during SCR. The half-cycle kinetics are studied over a wide (170–450 °C) temperature, and in differential segments along the catalyst length using spatially resolved capillary inlet mass-spectrometry (SpaciMS). The protocol alone provides two independent measures indicating that OHC increases faster than RHC with temperature, and that at all but the lowest temperature SCR is RHC limited. Introducing the transient kinetic models allows half-cycle reaction pathways, orders and activation energies to be studied and determined; e.g., RHC involves surface and gas-phase NH 3 routes, and OHC with O 2 involves dimer formation. Application of the full methodology provides further confirmation and quantification of the protocol conclusions, and specifically the first measurements of RHC and OHC activation energies; specifically for parallel RHC surface and gas-phase routes, and experimentally obtained OHC activation energy vs. first-principle calculations in the literature. Beyond insights related to the degreened catalyst studied here, the methodology provides a broadly available approach for quantifying how aging processes selectively impact RHC and OHC.
Time varying bound on nonlinear system transient response
Cantilever beam transient response measurement by stored beam /real time/ holographic interferometry combined with high speed motion picture photography
One-dimensional numerical analysis of transient response of thermal protection system
Pulsed-laser induced single event current measurements on two geometries of waveguide-integrated germanium photodiodes were conducted over a range of operating voltages to examine the impact of photodiode geometry on the transient response. Vertical PIN photodiodes exhibit transients with a duration that is relatively independent of the operating voltage while the transient duration in lateral PIN photodiodes depends on operating voltage. Furthermore, the experimental measurements facilitate identification of device dimensions that impact the transient response. In this work, these results can be used to identify potential radiation mitigation strategies for photodiodes operating in a radiation environment. Understanding the implications of design choices is critical for designing integrated photonic systems that balance system performance with tolerance for radiation degradation.
The nonlinear transient response of initially stressed composite plates is investigated using the finite element method. A nine-node isoparametric quadrilateral element is developed to model laminated plates under initial deformation and initial stress according to the Mindlin plate theory and von Karman large deflection assumptions. In the time integration, the Newmark constant acceleration method in conjunction with an efficient and accurate iteration scheme is used. Numerical results for deflections and bending moments for isotropic and laminated plates are obtained.
An algorithm for parallel computation of transient response for structures is presented in which responses of substructures are computed independently for dozens of time steps at a time, and these substructure responses are then corrected to obtain the response of the overall coupled structure. The correction of the uncoupled substructure responses only requires the responses computed for interfaces at occasional points in time, and is done independently for different substructures in a very efficient procedure. A numerical example is presented to demonstrate the method and show the accuracy of the method.