Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRANSFER MATRIX METHOD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Beyond the single-file fluid limit using transfer matrix method: Exact results for confined parallel hard squares

We extend the transfer matrix method of one-dimensional hard core fluids placed between confining walls for that case where the particles can pass each other and at most two layers can form. We derive an eigenvalue equation for a quasi-one-dimensional system of hard squares confined between two parallel walls, where the pore width is between σ and 3σ (σ is the side length of the square). The exact equation of state and the nearest neighbor distribution functions show three different structures: a fluid phase with one layer, a fluid phase with two layers, and a solid-like structure where the fluid layers are strongly correlated. The structural transition between differently ordered fluids develops continuously with increasing density, i.e., no thermodynamic phase transition occurs. The high density structure of the system consists of clusters with two layers which are broken with particles staying in the middle of the pore.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Model of a tunneling current in a p-n junction based on armchair graphene nanoribbons - an Airy function approach and a transfer matrix method

We modeled a tunneling current in a p-n junction based on armchair graphene nanoribbons (AGNRs) by using an Airy function approach (AFA) and a transfer matrix method (TMM). We used β-type AGNRs, in which its band gap energy and electron effective mass depends on its width as given by the extended Huckel theory. It was shown that the tunneling currents evaluated by employing the AFA are the same as those obtained under the TMM. Moreover, the calculated tunneling current was proportional to the voltage bias and inversely with temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study on the I–V characteristics of quantum well/dot embedded GaAs/AlGaAs structures - A transfer matrix method

The tunneling current has been calculated by a derived analytical expression for the transmission coefficient (TC) based on the theory of coherent resonant tunneling within the effective mass approximation by applying a constant field in quantum well/dot dopped RTD. For the bare Al{sub 0.35}Ga{sub 0.65}As double barrier structure, the peak to valley ratio is 0.165 from the I-V characteristics. Notably, the presence of In{sub 0.21}Ga{sub 0.79}As well in the emitter region significantly enhances the peak to valley ratio to 0.970. Interestingly, the presence of both the In{sub 0.21}Ga{sub 0.79}As well and InAs QD, increases the peak to valley ratio further to 0.978, because of the greater probability for the energy levels in these regions to be in resonance. On comparing experimental results, which show the similar trend for the current-voltage characteristics, imply that the quantum structure considered here is suitable for device applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A photoemission moments model using density functional and transfer matrix methods applied to coating layers on surfaces: Theory

Recent experimental measurements of a bulk material covered with a small number of graphene layers reported by Yamaguchi et al. [NPJ 2D Mater. Appl. 1, 12 (2017)] (on bialkali) and Liu et al.[Appl. Phys. Lett. 110, 041607 (2017)] (on copper) and the needs of emission models in beam optics codes have lead to substantial changes in a Moments model of photoemission. The changes account for (i) a barrier profile and density of states factor based on density functional theory (DFT) evaluations, (ii) a Drude-Lorentz model of the optical constants and laser penetration depth, and (iii) a transmission probability evaluated by an Airy Transfer Matrix Approach. Importantly, the DFT results lead to a surface barrier profile of a shape similar to both resonant barriers and reflectionless wells: the associated quantum mechanical transmission probabilities are shown to be comparable to those recently required to enable the Moments (and Three Step) model to match experimental data but for reasons very different than the assumption by conventional wisdom that a barrier is responsible. The substantial modifications of the Moments model components, motivated by computational materials methods, are developed. The results prepare the Moments model for use in treating heterostructures and discrete energy level systems (e.g., quantum dots) proposed for decoupling the opposing metrics of performance that undermine the performance of advanced light sources like the x-ray Free Electron Laser. The consequences of the modified components on quan-tum yield, emittance, and emission models needed by beam optics codes are discussed. Published by AIP Publishing. https://doi.org/10.1063/1.5008600

36 MATERIALS SCIENCE↗

Transfer-matrix Formalism for the Calculation of Optical Response in Multilayer Systems: from Coherent to Incoherent Interference

We present a novel way to account for partially coherent and incoherent interference phenomena in optical multilayer systems via the transfer-matrix method. The transfer matrix method is employed in its usual way via Fresnel coefficients in a 2x2 matrix configuration. The novel feature is that there is no need to use modified Fresnel coefficients or the square of their amplitudes to work in the incoherent limit. The transition from coherent, to partially coherent, to incoherent interference is achieved by introducing a random phase of increasing intensity in the propagating media. This random phase can simulate the effect of defects or impurities in the media. This method provides a general way of dealing with optical multilayer systems, in which coherent and incoherent interference are treated on equal footing.

97 MATHEMATICS AND COMPUTING↗

Transfer-matrix-based method for an analytical description of velocity-map-imaging spectrometers

We propose a simple and general analytical model describing the operation of a velocity-map-imaging spectrometer. We show that such a spectrometer, possibly equipped with a magnifying lens, can be efficiently modeled by combining analytical expressions for the axial potential distributions along with a transfer matrix method. The model leads transparently to the prediction of the instrument's operating conditions as well as to its resolution. A photoelectron velocity-map-imaging spectrometer with a magnifying lens, built and operated along the lines suggested by the model has been successfully employed for recording images at threshold photoionization of atomic lithium. The model's reliability is demonstrated by the fairly good agreement between experimental results and calculations. Finally, the limitations of the analytical method along with possible generalizations, extensions, and potential applications are also discussed. The model may serve as a guide for users interested in building and operating such spectrometers as well as a tutorial tool.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The theoretical study of passive and active optical devices via planewave based transfer (scattering) matrix method and other approaches

In this thesis, we theoretically study the electromagnetic wave propagation in several passive and active optical components and devices including 2-D photonic crystals, straight and curved waveguides, organic light emitting diodes (OLEDs), and etc. Several optical designs are also presented like organic photovoltaic (OPV) cells and solar concentrators. The first part of the thesis focuses on theoretical investigation. First, the plane-wave-based transfer (scattering) matrix method (TMM) is briefly described with a short review of photonic crystals and other numerical methods to study them (Chapter 1 and 2). Next TMM, the numerical method itself is investigated in details and developed in advance to deal with more complex optical systems. In chapter 3, TMM is extended in curvilinear coordinates to study curved nanoribbon waveguides. The problem of a curved structure is transformed into an equivalent one of a straight structure with spatially dependent tensors of dielectric constant and magnetic permeability. In chapter 4, a new set of localized basis orbitals are introduced to locally represent electromagnetic field in photonic crystals as alternative to planewave basis. The second part of the thesis focuses on the design of optical devices. First, two examples of TMM applications are given. The first example is the design of metal grating structures as replacements of ITO to enhance the optical absorption in OPV cells (chapter 6). The second one is the design of the same structure as above to enhance the light extraction of OLEDs (chapter 7). Next, two design examples by ray tracing method are given, including applying a microlens array to enhance the light extraction of OLEDs (chapter 5) and an all-angle wide-wavelength design of solar concentrator (chapter 8). In summary, this dissertation has extended TMM which makes it capable of treating complex optical systems. Several optical designs by TMM and ray tracing method are also given as a full complement of this work.

14 SOLAR ENERGY↗

Photonic band gaps in one-dimensional magnetized plasma photonic crystals with arbitrary magnetic declination

In this paper, the properties of photonic band gaps and dispersion relations of one-dimensional magnetized plasma photonic crystals composed of dielectric and magnetized plasma layers with arbitrary magnetic declination are theoretically investigated for TM polarized wave based on transfer matrix method. As TM wave propagates in one-dimensional magnetized plasma photonic crystals, the electromagnetic wave can be divided into two modes due to the influence of Lorentz force. The equations for effective dielectric functions of such two modes are theoretically deduced, and the transfer matrix equation and dispersion relations for TM wave are calculated. The influences of relative dielectric constant, plasma collision frequency, incidence angle, plasma filling factor, the angle between external magnetic field and +z axis, external magnetic field and plasma frequency on transmission, and dispersion relation are investigated, respectively, and some corresponding physical explanations are also given. From the numerical results, it has been shown that plasma collision frequency cannot change the locations of photonic band gaps for both modes, and also does not affect the reflection and transmission magnitudes. The characteristics of photonic band gaps for both modes can be obviously tuned by relative dielectric constant, incidence angle, plasma filling factor, the angle between external magnetic field and +z axis, external magnetic field and plasma frequency, respectively. These results would provide theoretical instructions for designing filters, microcavities, and fibers, etc.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

JASMINE: a fuel rod thermal-mechanical performance's code

JASMINE, which is developed by China General Nuclear Power Corporation (CGNPC), is a code for calculating thermal-mechanical response of PWR fuel rods. The code models many physical phenomena, including heat conduction through the fuel and cladding to the coolant, cladding elastic and plastic deformation, fuel elastic deformation, fuel swelling and densification,fuel-cladding mechanical interaction, fission gas release from the fuel, rod internal pressure, cladding oxidation and hydriding. Just as most fuel rod codes, JASMINE, which is a quasi-two dimensional code, includes a thermal module, a mechanical module, a fission gas release (FGR) module, and an internal pressure module. For thermal module, the time dependent thermal conduction equation of axisymmetric cylindrical geometry, Halden's fuel thermal conductivity, thermal conductivity integration method and multi-dimension Newton-Raphson procedure are used; for the mechanical module, generalized plane strain hypothesis, cladding-fuel axial lockup model, cladding thermal stress and transfer matrix method are applied; for fission gas release module, the time dependent diffusion equation for a spherical grain, Speight-Turnbull grain surface boundary condition, and Forsberg-Massih's method are used; for the internal pressure module, the ideal gas state equation is used. The code, which is on validation stage, will be used for fuel rod design of nuclear power plants in China in a near future. So far, the preliminary validation process for pellet centerline temperature and fission gas release, which is based on fuel rod test data in FUMEX-III project, has finished. According to the validation results, JASMINE has the ability to reasonably predicts fuel behavior and performance in-pile. JASMINE has good prediction in fuel temperature, and good prediction on FGR as a whole. However, for FGR in the range 1% to 15%, JASMINE over-predicts FGR; for other range, JASMINE underestimates FGR. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DETECTION OF DISBONDING IN GLARE COMPOSITES USING LAMB WAVE APPROACH

Lamb-waves can be used to detect disbonds in composite plates. In this work, a photoacoustic technique was first applied to measure the dispersive property of a GLAss-REinforced (GLARE) composite panel. The measured phase velocity dispersion curves are consistent with the theoretical calculation using the classical transfer matrix method for layered media. Based on the obtained properties, a finite element method (FEM) model was constructed to study the influence of a disbond void on the Lamb wave propagation in the GLARE plate. It is found that the displacement amplitudes of the A{sub o} mode Lamb wave decrease while its travel time increases as the disbond size increases.

36 MATERIALS SCIENCE↗

A novel tunable filter featuring defect mode of the TE wave from one-dimensional photonic crystals doped by magnetized plasma

A novel tunable filter featuring the defect mode of the TE wave from one-dimensional photonic crystals doped by magnetized plasma is presented. The photonic crystals are composed by SiO{sub 2} and air with one defect layer made by magnetized plasma. By the transfer matrix method and Bloch's theorem, we find out that the frequency of the defect mode can be modulated by plasma density or external magnetic field. Without changing the structure of the photonic crystal, the defect mode can be modulated in a larger frequency range, especially when the left-hand polarized electromagnetic wave is utilized.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of band structure, transmission properties, and dispersion behavior of THz wave in one-dimensional parabolic plasma photonic crystal

The photonic band gap of obliquely incident terahertz electromagnetic waves in a one-dimensional plasma photonic crystal is studied. The periodic structure consists of lossless dielectric and inhomogeneous plasma with a parabolic density profile. The dispersion relation and the THz wave transmittance are analyzed based on the electromagnetic equations and transfer matrix method. The dependence of effective plasma frequency and photonic band gap characteristics on dielectric and plasma thickness, plasma density, and incident angle are discussed in detail. A theoretical calculation for effective plasma frequency is presented and compared with numerical results. Results of these two methods are in good agreement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reflectance properties of one-dimensional metal-dielectric ternary photonic crystal

Metallic photonic crystal has a very important application in absorption enhancement in solar cells. It has been found that an ultra-thin metallic layer becomes transparent due to internal scattering of light through the each interface of the dielectric and metal surfaces. The metal has absorption due to their surface plasmon and the plasmon has important parameters for changing optical properties of the metal. We consider ternary metallic-dielectric photonic crystal (MDPC) for having large probabilities to change the optical properties of the MDPC and the photonic crystals may be changed by changing dimensionality, symmetry, lattice parameters, Filling fraction and effective refractive index refractive index contrast. In this present communication, we try to show that the photonic band gap in ternary metal-dielectric photonic crystal can be significantly enlarged when air dielectric constant is considered. All the theoretical analyses are made based on the transfer matrix method together with the Drude model of metal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bragg resonance in a system of AsSb plasmonic nanoinclusions in AlGaAs

The optical reflection from periodic structures based on a semiconductor AlGaAs matrix containing 2D arrays of plasmonic AsSb nanoinclusions is studied. The number of nanoinclusion layers is 12 or 24, and the nominal spatial periods are 100 or 110 nm, respectively. In the experimental spectra of the optical reflection coefficient at normal incidence, we observe resonant Bragg diffraction with the main peaks at wavelengths of 757 or 775 nm (1.64 or 1.60 eV), depending on the spatial period of the nanostructure. The magnitudes of the resonance peaks reach 22 and 31% for the systems of 12 and 24 AsSb–AlGaAs layers, while the volume fraction of the nanoinclusions is much less than 1%. In the case of light incident at inclined angles, the Bragg-diffraction pattern shifts according to Wulff–Bragg’s law. Numerical simulation of the optical reflection spectra is performed using the transfer-matrix method by taking into account the spatial geometry of the structures and the resonance characteristics of the plasmonic AsSb layers.

36 MATERIALS SCIENCE↗

Solving scattering problems in the half-line using methods developed for scattering in the full line

We reduce the solution of the scattering problem defined on the half-line [0,∞) by a real or complex potential v(x) and a general homogeneous boundary condition at x=0 to that of the extension of v(x) to the full line that vanishes for x<0. We find an explicit expression for the reflection amplitude of the former problem in terms of the reflection and transmission amplitudes of the latter. We obtain a set of conditions on these amplitudes under which the potential in the half-line develops bound states, spectral singularities, and time-reversed spectral singularities where the potential acts as a perfect absorber. We examine the application of these results in the study of the scattering properties of a δ-function potential and a finite barrier potential defined in [0,∞), discuss optical systems modeled by these potentials, and explore the configurations in which these systems act as a laser or perfect absorber. In particular, we derive an explicit formula for the laser threshold condition for a slab laser with a single mirror and establish the surprising fact that a nearly perfect mirror gives rise to a lower threshold gain than a perfect mirror. We also offer a nonlinear extension of our approach which allows for utilizing a recently developed nonlinear transfer matrix method in the full line to deal with finite-range nonlinear scattering interactions defined in the half-line.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resonant Optical Reflection from AsSb–AlGaAs Metamaterials and Structures

The optical reflection in periodic structures based on a semiconductor AlGaAs matrix containing two-dimensional arrays of plasmonic AsSb nanoinclusions was studied. The number of periods was 12 or 24. The spatial period was near 110 nm in both cases. In the experimental optical reflection spectra at normal incidence we observed resonant Bragg diffraction with the main peaks at wavelengths of 757 or 775 nm, depending on the spatial period of the nanostructure. The magnitudes of the resonance peaks reached 19 and 31% for the systems of 12 and 24 AsSb–AlGaAs layers, while the volume fraction of the nanoinclusions was much less than 1%. In the case of light incident at inclined angles, the Bragg-diffraction pattern shifted according to Wulff-Bragg’s law. Numerical calculations of the optical reflection spectra were performed using the transfer-matrix method by taking into account the spatial geometry of the structures and the resonance characteristics of the plasmonic AsSb layers.

36 MATERIALS SCIENCE↗

Coupled-cavity terahertz quantum cascade lasers for single mode operation

We demonstrate the operation of coupled-cavity terahertz frequency quantum-cascade lasers composed of two sub-cavities separated by an air gap realized by optical lithography and dry etching. This geometry allows stable, single mode operation with typical side mode suppression ratios in the 30–40 dB range. We employ a transfer matrix method to model the mode selection mechanism. The obtained results are in good agreement with the measurements and allow prediction of the operating frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗