Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TITANIUM ISOTOPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Titanium isotopic anomalies in hibonites from the Murchison carbonaceous chondrite

The isotopic compositions of titanium in eight grains of hibonite (CaAl12O19) from the carbonaceous chondrite Murchison have been determined by high precision secondary ion mass spectrometry using an ion microprobe. The titanium in the hibonites varies greatly in Ti-50 from about -42 to +8 permil (relative to terrestrial) with smaller (up to 4 permil), but clearly resolvable, effects in Ti-46 and Ti-48. These results confirm the presence of widespread negative anomalies suggested by the results of Hutcheon et al. (1983) on hibonites from Murchison. The magnitude of these variations seems explicable only in terms of nucleogenic processes which produced extremely variable titanium isotopic abundances in the hibonite source materials. The hibonites evidently did not participate to the same extent as most material in the mixing and homogenisation processes that accompanied the formation and later evolution of the solar system.

Ireland, T.↗

A Procedure to Simultaneously Determine the Calcium, Chromium, and Titanium Isotopic Compositions of Astromaterials

Many elements display both linear (mass-dependent) and non-linear (mass-independent) isotope anomalies (relative to a common reservoir). In early Solar System objects, with the exception of oxygen, mass-dependent isotope anomalies are most commonly thought to result from phase separation processes such as evaporation and condensation, whereas many mass-independent isotope anomalies likely reflect radiogenic ingrowth or incomplete mixing of presolar components in the proto-planetary disk. Coupling the isotopic characterization of multiple elements with differing volatilities in single objects may provide information regarding the location, source material, and/or processes involved in the formation of early Solar System solids. Here, we follow up on the work presented in, and detail new procedures developed to make high-precision multi-isotope measurements of Calcium, Chromium, and Titanium with small or limited amounts of sample using thermal ionization mass spectrometry and multi-collector ICP-MS, and characterize a suite of chondritic and terrestrial standards.

Tappa, M. J.↗

Titanium isotope systematics of refractory inclusions: Echoes of molecular cloud heterogeneity

Calcium-aluminum-rich inclusions (CAIs) are highly refractory objects found in different chondrite groups and represent some of the oldest known solids of the Solar System. As such, CAIs provide key information regarding the conditions prevailing in the solar protoplanetary disk as well as subsequent mixing and transport processes. Many studies have investigated CAIs for their isotopic compositions and reported nucleosynthetic isotope anomalies in numerous elements, which are typically explained by the variable incorporation of isotopically highly anomalous presolar phases. However, with the exception of 54 Cr-enriched nanospinels, the exact presolar phases responsible for the isotopic heterogeneities are yet to be identified. To address this issue, we here present in-situ Ti isotopic analyses obtained on a diverse set of CAIs from various CV3 chondrites. In this work, the in-situ measurements were performed by targeting individual mineral phases of 15 CAIs with laser-ablation mass spectrometry and indicate significant inter- and intra-CAI isotopic heterogeneity in the neutron-rich isotope 50 Ti. This is particularly pronounced for primitive fine-grained CAIs, whereas coarse-grained CAIs, which have been subject to melting, exhibit smaller degrees of Ti isotopic heterogeneity. To further investigate this Ti isotopic heterogeneity, we additionally obtained Ti isotopic compositions of sequential acid leachates from two fine-grained and two coarse-grained CAIs derived from CV3 chondrites. In contrast to potential expectations from the first part of the study, we do not observe any significant intra-CAI Ti isotopic heterogeneity between the different leaching steps. The lack of intra-CAI Ti isotopic heterogeneity in the acid leachate samples of this study likely reflects that the leaching procedure is unable to efficiently separate the carriers of isotopically anomalous Ti in CAIs. By comparing the bulk CAI Ti isotope compositions with Ti isotope data for hibonite-rich objects from the literature, we find that the range of Ti isotope compositions recorded by CAIs from various chondrite groups can be accounted for by the averaging of hibonite grains. In turn, the variable Ti isotope compositions of hibonite grains can be explained by the averaging of isotopically diverse presolar grains present in the Sun’s parental molecular cloud. This effect of averaging is statistically supported by the central limit theorem, and the concept has the potential to be useful for other isotopic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fractionation of Iron and Titanium Isotopes By Ilmenite and the Isotopic Compositions of Lunar Magma Ocean Cumulates

Basaltic volcanism on the Moon produced low- and high-Ti mare basalt suites that are also distinct with respect to their iron, titanium, and magnesium iso- topic compositions. Here, the equilibrium fractionation of Fe and Ti isotopes between ilmenite and melt was experimentally investigated in order to evaluate the role of ilmenite in generating the isotopic compositional variability among the lunar mare basalts. Ilmenite crystallization experiments were conducted using two bulk compositions: an ilmenite-saturated basaltic andesite and an ilmenite-saturated Apollo 14 black glass, and the Fe and Ti isotopic compo- sitions of the experimental ilmenites and glass (quenched melt) were analyzed using solution MC-ICPMS after hand-picking. Additionally, Nuclear Resonant Inelastic X-ray Scattering (NRIXS) measurements on synthetic ilmenite were conducted and compared to previous NRIXS measurements on synthetic lunar glasses in order to derive temperature-dependent equilibrium ilmenite-melt Fe isotopic fractionations. Experimentally determined ilmenite-melt fractionations were then incorporated into a lunar magma ocean crystallization model that tracks the major element and isotopic compositional evolution of lunar magma ocean cumulates and residual liquid. There is good agreement between the Fe equilibrium isotopic fractionation measured by NRIXS and the laboratory equili- bration experiments, and we find that the isotopic fractionation is sensitive to il- menite compositional differences (0 vs. 10% Fe3+). Further, the light Ti isotopic composition of ilmenite relative to the melt (∆49Ti ilmenite-melt = −0.09 ± 0.03h at 1100°C) is consistent with the higher coordination of Ti in ilmenite relative to melts and results of previous studies. The modeled Ti isotopic compositions for lunar magma ocean cumulates display Ti isotopic variability sufficient to explain the low- and high-Ti mare basalt sources. However, the difference in Fe isotopic composition between the low- and high-Ti mare basalts cannot be attributed solely to ilmenite fractionation. Instead, Fe isotopic fractionation by additional products of lunar magma ocean crystallization, such as clinopy- roxene, is required to generate the inferred Fe and Mg isotopic variability in the lunar mantle. Alternatively, the Fe and Mg isotopic compositions of the lunar mare basalts may indicate Fe-Mg interdiffusion has occurred in the Ti- rich component of the mare basalt source regions via reaction between ilmenite cumulates and the olivine- and pyroxene-rich lunar mantle.

Kelsey Prissel↗

Iron, magnesium, and titanium isotopic fractionations between garnet, ilmenite, f ayalite, biotite, and tourmaline: Results from NRIXS, ab initio , and study of mineral separates from the Moosilauke metapelite

Interpreting isotopic signatures documented in natural rocks requires knowledge of equilibrium isotopic fractionation factors. Here, we determine equilibrium Fe isotope fractionation factors between several common rock-forming minerals using a comparative approach involving three independent methods: (i) isotopic analyses of natural minerals from a metapelite from Mt. Moosilauke, New Hampshire, for which equilibration temperature and pressure are well constrained to be near the aluminosilicate triple point (T ≃ 500 °C, P ≃ 4 kbar), (ii) Nuclear Resonant Inelastic X-ray Scattering (NRIXS) measurements of Fe force constants of minerals, and (iii) Density Functional Theory (DFT) ab initio calculations of Fe force constants of minerals. The minerals studied for Fe isotopes include, in increasing order of their β-factors: garnet < ilmenite ≈ fayalite < biotite < tourmaline < muscovite ≈ plagioclase. Some of this ordering is affected by the presence of Fe 3+ in the minerals, which tends to form stiffer bonds and be associated with heavy Fe isotope enrichments relative to Fe 2+ . We are, however, able to assess the magnitude of the effect of the ratio Fe 3+ /ΣFe on equilibrium fractionation factors, notably on the ilmenite-hematite solid solution. Equilibrium Fe isotopic fractionation factors between garnet, ilmenite, biotite, tourmaline and fayalite are determined. We also report Mg and Ti isotopic compositions of selected Moosilauke minerals that allow us to better constrain the equilibrium fractionation factors for garnet-biotite-tourmaline (Mg isotopes) and biotite-ilmenite (Ti isotopes). We show how the newly determined equilibrium fractionation factors can be used to address diverse problems in Earth and planetary sciences, notably (i) Fe and Mg isotopic fractionation during anatexis, (ii) Fe isotopic fractionation in lunar ilmenite, and (iii) Ti isotopic fractionation during fluvial transport of minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Titanium isotopic anomalies in meteorites

Studies of Ti isotopic compositions have shown that virtually every Ca-Al-rich Allende inclusion contains anomalous Ti. The present investigation is concerned with the results of a study of Ti isotopic compositions in meteorites. One objective of the study is to evaluate the possibility of a relation between oxygen and Ti anomalies, while another objective is to explore questions regarding the origin of the Ti anomalies. A summary of the major experimental findings of the study of Ti isotopic compositions is also presented. It is noted that an assessment of the implications of the Ti results favors a chemical memory type of model in which products from various nucleosynthetic sources survive in mineral grains. Isotopic heterogeneities are then preserved due to incomplete mixing and/or equilibriation with the bulk of solar system matter. Strong arguments are found to exist against a pure late supernova injection model.

Niemeyer, S.↗

Carbon, nitrogen, magnesium, silicon, and titanium isotopic compositions of single interstellar silicon carbide grains from the Murchison carbonaceous chondrite

Seven hundred and twenty SiC grains from the Murchison CM2 chondrite, ranging in size from 1 to 10 micrometers, were analyzed by ion microprobe mass spectrometry for their C-isotopic compositions. Subsets of the grains were also analyzed for N (450 grains), Si (183 grains), Mg (179 grains), and Ti (28 grains) isotopes. These results are compared with previous measurements on 41 larger SiC grains (up to 15 x 26 micrometers) from a different sample of Murchison analyzed by Virag et al. (1992) and Ireland, Zinner, & Amari (1991a). All grains of the present study are isotopically anomalous with C-12/C-13 ratios ranging from 0.022 to 28.4 x solar, N-14/N-15 ratios from 0.046 to 30 x solar, Si-29/Si-28 from 0.54 to 1.20 x solar, Si-30/Si-28 from 0.42 to 1.14 x solar, Ti-49/Ti-48 from 0.96 to 1.95 x solar, and Ti-50/Ti-48 from 0.94 to 1.39 x solar. Many grains have large Mg-26 excesses from the decay of Al-26 with inferred Al-26/Al-27 ratios ranging up to 0.61, or 12,200 x the ratio of 5 x 10(exp -5) inferred for the early solar system. Several groups can be distinguished among the SiC grains. Most of the grains have C-13 and N-14 excesses, and their Si isotopic compositions (mostly excesses in Si-29 and Si-30) plot close to a slope 1.34 line on a Delta Si-29/Si-28 versus Delta Si-30/Si-28 three-isotope plot. Grains with small C-12/C-13 ratios (less than 10) tend to have smaller or no N-14 excesses and high Al-26/Al-27 ratios (up to 0.01). Grains with C-12/C-13 greater than 150 fall into two groups: grains X have N-15 excesses and Si-29 and Si-30 deficits and the highest (0.1 to 0.6) Al-26/Al-27 ratios; grains Y have N-14 excesses and plot on a slope 0.35 line on a Si three-isotope plot. In addition, large SiC grains of the Virag et al. (1992) study fall into three-distinct clusters according to their C-, Si-, and Ti-isotopic compositions. The isotopic diversity of the grains and the clustering of their isotopic compositions imply distinct and multiple stellar sources. The C- and N-isotopic compositions of most grains are consistent with H-burning in the CNO cycle. These and s-process Kr, Xe, Ba, and Nd suggest asymptotic giant branch (AGB) or Wolf-Rayet stars as likely sources for the grains, but existing models of nucleosynthesis in these stellar sites fail to account in detail for all the observed isotopic compositions. Special problems are posed by grains with C-12/C-13 less than 10 and almost normal and heavy N-isotopic compositions. Also the Si- and Ti-isotopic compositions, with excesses in Si-29 and Si-30 relative to Si-28 and excesses in all Ti isotopes relative to Ti-48, do not precisely conform with the compositions predicted for slow neutron capture. Additional theoretical efforts are needed to achieve an understanding of the isotopic composition of the SiC grains and their stellar sources.

Hoppe, Peter↗

Calcium and Titanium Isotope Fractionation in CAIS: Tracers of Condensation and Inheritance in the Early Solar Protoplanetary Disk

The chemical and isotopic compositions of calcium-aluminum-rich inclusions (CAIs) can be used to understand the conditions present in the protoplantary disk where they formed. The isotopic compositions of these early-formed nebular materials are largely controlled by chemical volatility. The isotopic effects of evaporation/sublimation, which are well explained by both theory and experimental work, lead to enrichments of the heavy isotopes that are often exhibited by the moderately refractory elements Mg and Si. Less well understood are the isotopic effects of condensation, which limits our ability to determine whether a CAI is a primary condensate and/or retains any evidence of its primordial formation history.

Simon, J. I.↗

Magnesium and Titanium Isotopic Compositions of an Unusual Hibonite-Perovskite Refractory Inclusion from Allende: It Is Fun

Introduction: Hibonite-rich refractory inclusions are among the first solids that formed in the solar nebula, and thus provide constraints on the earliest environment in the Solar System. An unusual hibonite-perovskite inclusion from Allende, SHAL, consists of a large (approximately 500 by 200 microns) single hibonite crystal and coexisting blocky perovskite (approximately 200 microns in size). The hibonite is characterized by chemical and oxygen isotopic compositions similar to those in the FUN (Fractionated and Unknown Nuclear anomalies) inclusion HAL. However, the rare earth element (REE) patterns measured at different spots of SHAL hibonite are highly variable, ranging from Group II-like (light REEs enriched relative to heavy REEs) to Group III-like (relatively flat with slight Eu depletions), but overall contrast largely with that of HAL, especially in the Ce and Yb abundances. This implies that SHAL hibonite formed and underwent distillation processes under more reducing conditions. Interestingly, the accompanying perovskite has uniform, unfractionated oxygen isotopic compositions (averaging delta (sup 17) O equals delta (sup 18) O equals −7 per mille) and REE abundances that are completely different from those of SHAL hibonite. This has been interpreted that perovskite and hibonite may not be co-genetic. Here we performed Al-Mg and Ti isotopic measurements of SHAL hibonite and perovskite to determine if the FUN characteristics are observed in these two isotope systems, and to further constrain the origin and evolution of SHAL. Results: Isotopic measurements of Al-Mg and Ti in SHAL were performed on the UCLA CAMECA ims-1290 ion microprobe by following the analytical protocols described in [1]. The Al-Mg and Ti data obtained in both terrestrial standards and SHAL hibonite and perovskite are shown below. Both SHAL hibonite and perovskite, despite very high (sup 27) Al to (sup 24) Mg ratios, are devoid of (sup 26) Mg excesses that can be attributed to the decay of (sup 26) Al. Delta (sup 25) Mg (mass-dependent fractionation) in hibonite is approximately −5 per mille per atomic mass unit relative to Madagascar hibonite, but is not well constrained for perovskite due to very large uncertainties owing to extremely low Mg contents. Similar to Mg isotopes, SHAL hibonite and perovskite show essentially the same Ti isotopic compositions, with anomalies in (sup 50) Ti of approximately 14 per mille, but the former shows greater Ti isotope fractionation than the latter (2.5 per mille per atomic mass unit versus 0 per mille). Discussion and Conclusions: The Al-Mg and Ti isotopic compositions of SHAL hibonite are consistent with those of HAL, suggesting that SHAL hibonite is a FUN inclusion and likely formed prior to homogenization of (sup 26) Al and Ti isotope variations in the solar nebula. However, the formation mechanisms for SHAL and HAL differ, given the differences in the REE patterns and degrees of oxygen mass-dependent fractionation. The Group-II to Group-III like REE patterns, the Yb depletions, and negative delta (sup 25) Mg observed in SHAL hibonite are all consistent with condensation of the hibonite precursor in a reducing environment.. The lack of large Ce depletions in SHAL hibonite implies that distillation processes that fractionated hibonite's oxygen isotopes must have taken place under a reducing condition, but the extent to which SHAL hibonite was distilled appears to be less than HAL because of the smaller degree of oxygen mass-dependent fractionation. The perovskite shares essentially the same Ti and Mg isotopic compositions as hibonite and probably formed in the same reservoir.. The ultrarefractory REE pattern seen in perovskite likely resulted from gas-solid fractionation which depleted HREEs in this reservoir. This process also explains why SHAL hibonite is generally depleted in HREEs relative to LREEs.

Liu, M.-C.↗

Endemic isotopic anomalies in titanium

Abundances of the titanium isotopes were determined using a new high-precision technique that shows terrestrial, lunar, and bulk meteorite samples to be indistinguishable. Ca-Al-Ti-rich inclusions in the Allende meteorite are found to contain Ti of widely varying isotopic composition reflecting the presence of at least three nucleosynthetic components. The anomalies in Ti appear to be relatively widespread and, when correlated with Ca data, provide a clue to nucleosynthesis in the neighborhood of the iron peak and to the late-stage nucleosynthetic processes which immediately preceded formation of the solar nebula.

Niederer, F. R.↗

Isotopes of titanium in cool stars

A program of stellar Ti isotopic-abundance determinations is described and related to changes that may have occurred in the Ti isotopic abundance ratios during the chemical evolution of the Galaxy, and to whether the abundance ratios are perturbed in the S and MS stars having atmospheres with enhanced abundances of s-process nuclei resulting from convective mixing after internal exposure to neutrons. High-resolution (0.07 A) Reticon spectra of portions of the TiO gamma (0,0), gamma (0,1), and delta (0,0) bands were the source material, and particular emphasis was placed on the definition of the continuum level. The isotopic abundance ratios are terrestrial in all of the sample, and errors in the (Ti-i)/(Ti-48) ratio are typically plus or minus 25% for the dwarfs and plus or minus 50% for the giants. The observations show that the magic nucleus Ti-50 is not enhanced in S and MS stars.

Clegg, R. E. S.↗

A common isotopic reservoir for amoeboid olivine aggregates (AOAs) and calcium-aluminum-rich inclusions (CAIs) revealed by Ti and Cr isotopic compositions

Amoeboid olivine aggregates (AOAs) are the most abundant type of refractory inclusions found in most carbonaceous chondrite groups. AOAs are thought to be genetically related to calcium-aluminum-rich inclusions (CAIs) and potential chondrule precursor components, although the precise physical and temporal details of AOA formation and their relationship to other chondritic components remain unclear. In this study, we measured the chromium and titanium isotopic compositions of eight AOAs from four different CV chondrites with the goal of evaluating potential genetic links between AOAs, CAIs, and chondrules. These are the first Cr and Ti isotopic data reported beyond a single AOA previously measured for Cr and a different single AOA previously measured for Ti. The results presented here show that the ε 54 Cr and ε 50 Ti isotopic compositions of AOAs are indistinguishable from those of CAIs, suggesting that AOAs and CAIs formed from a common region of the disk. Here, we also demonstrate, based on the comparison of the Cr and Ti isotopic composition of AOAs to previously measured chondrules, that mixing between AOAs and an NC compositional endmember alone cannot fully explain the range of measured chondrule compositions. Although AOAs may have been important chondrule precursor components along with AOA olivine, CAIs, fragments of earlier generation chondrules, and fine-grained matrix material, this observation requires another currently unknown component to be involved in chondrule formation.

58 GEOSCIENCES↗

An approach to separating Pu, U, and Ti from high-purity graphite for isotopic analysis by MC-ICP-MS

Information about elemental and isotopic systematics of ultra-trace level actinides (e.g. U and Pu) and main group elements (e.g. Ti) present within nuclear grade graphite is vital to the nuclear community for improved reactor operation and security. In support of this, extensive effort has been placed on improving analysis methods (i.e., inductively coupled plasma-mass spectrometry). However, significantly less effort has been devoted to the optimization of chemical separation methods. Within the separation community, commercially available Eichrom™ resins are often employed, as their elution characteristics for various elements have been well studied, but the direct optimization of actinides and trace metal separations from a single sample have not been widely investigated. Here, methods using various Eichrom pre-packed cartridges were explored to achieve separation of ultra-trace levels of U, Pu, and Ti from a variety of graphite samples. Once the validity of the combined separation scheme was established using certified reference materials, the method was applied to historic, unirradiated and irradiated, graphite samples. For all samples investigated, precise isotope ratio measurements for the titanium isotope systems were made.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Natural isotopic compositions of titanium, iron, and nickel observed in commercial fuel pellets – Promising candidate elements for stable isotope tagging

Stable isotope taggants would constitute unique identifiers for nuclear fuel cycle materials, resulting in expedited timelines and high confidence provenance assessments for nuclear forensics investigations. However, reliably identifying and interpreting stable isotope taggants in nuclear materials recovered from outside of regulatory control will largely be predicated on the assumption that the taggant element intrinsic to the untagged nuclear material exhibits natural isotopic ratios. Here, we present high-precision Ti, Fe, and Ni isotope compositions in 13 commercial low-enriched uranium (LEU) fuel pellets to assess the suitability of these transition metals as stable isotope taggants. Our investigations reveal limited isotope variations among the fuel pellets in all three elements, which are consistent with small mass-dependent isotope fractionations, comparable to variations previously reported for natural samples. In practice, isotopically tagged nuclear materials are expected to fall along isotopic mixing lines, since intrinsic background levels of taggant elements dilute the taggant towards natural isotope compositions. Furthermore, the observation that Ti, Fe, and Ni isotope compositions in a suite of LEU fuel pellets are close to or indistinguishable from estimates for the Bulk Silicate Earth demonstrates that a two end-member mixing assumption would be valid for these transition metals, indicating that all three are promising candidate elements for stable isotope tagging. Finally, we present mass balance calculations to quantify isotopic perturbations expected from admixing isotopically anomalous Ti, Fe, and Ni taggants to assess the interplay between elemental and taggant concentrations and find favorable compromises for facilitating successful taggant identification with current analytical methods.

Intentional forensics↗

Nucleosynthesis at Strong Magnetization and the Titanium Problem

Ultramagnetized atomic nuclei created in supernova explosions, neutron star mergers, magnetar crusts and heavy ion collisions are considered. It is shown that for field strengths of 0.1–10 teratesla, the linear magnetic response dominates and the Zeeman effect leads to an increase in the binding energy of atomic nuclei with open shells. Considerable increase in a yield of corresponding products of explosive nucleosynthesis is consistent with results of observations. For iron-group nuclei, such a magnetic enhancement of {sup 44}Ti yield also implies a significant increase in the fraction of the main titanium isotope {sup 48}Ti in the chemical composition of galaxies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Some key issues in isotopic anomalies - Astrophysical history and aggregation

Astrophysical history, particularly that period extending from stellar nucleosynthesis events to the formation of meteorites, is discussed as the key element for the understanding of isotopic anomalies in meteorites. The bulk homogeneity of the interstellar medium is considered, and it is argued that, despite the presence of spatial inhomogeneities due to different nucleosynthesis rates in different parts of the galaxy and supernova ejecta, a cosmic chemical memory of nucleosynthesis patterns, rather than an inhomogeneous injection, is the source of isotopic anomalies. According to this view, volatility patterns and some isotopic patterns are mapped onto a grain-size spectrum, and the FUN systematics may be explained by interstellar sputtering. Furthermore, meteoritic He and Ne abundances are inferred to be presolar, and the ubiquitous titanium isotopic anomalies are explained by processes of chemical fixation and condensation in varying environments.

Clayton, D. D.↗