Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TITANIUM IONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Performance Evaluation of Titanium Ion Optics for the NASA 30 cm Ion Thruster

The results of performance tests with titanium ion optics were presented and compared to those of molybdenum ion optics. Both titanium and molybdenum ion optics were initially operated until ion optics performance parameters achieved steady state values. Afterwards, performance characterizations were conducted. This permitted proper performance comparisons of titanium and molybdenum ion optics. Ion optics' performance A,as characterized over a broad thruster input power range of 0.5 to 3.0 kW. All performance parameters for titanium ion optics of achieved steady state values after processing 1200 gm of propellant. Molybdenum ion optics exhibited no burn-in. Impingement-limited total voltages for titanium ion optics where up to 55 V greater than those for molybdenum ion optics. Comparisons of electron backstreaming limits as a function of peak beam current density for molybdenum and titanium ion optics demonstrated that titanium ion optics operated with a higher electron backstreaming limit than molybdenum ion optics for a given peak beam current density. Screen grid ion transparencies for titanium ion optics were as much as 3.8 percent lower than those for molybdenum ion optics. Beam divergence half-angles that enclosed 95 percent of the total beam current for titanium ion optics were within 1 to 3 deg. of those for molybdenum ion optics. All beam divergence thrust correction factors for titanium ion optics were within 1 percent of those with molybdenum ion optics.

Soulas, George C.↗

Regularities of Plasma-Immersion Formation of Long-Pulse High-Intensity Titanium Ion Beams

The results of experimental investigations on plasma-immersion formation of ballistically focused beams of low-energy titanium ions with the pulse duration up to 30 μs are presented. The processes of neutralization of the space charge of high-intensity beams upon increasing the ion-current density by a few orders of magnitude during their focusing are addressed. The conditions of preliminary injection of the metal plasma, its parameters, the formation of the beam plasma during residual-gas ionization and secondary and thermionic emissions are shown to be of critical importance for an effective transport of these beams in the equi-potential drift space. It is demonstrated that the use of a disc electrode, preventing the macroparticles from penetrating the region of the ballistic beam focusing, increases the efficiency of long-pulse titanium ion beam transport and simultaneously reduces the probability of instability development.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nanocomposite formed by titanium ion implantation into alumina

Composites of titanium nanoparticles in alumina were formed by ion implantation of titanium into alumina, and the surface electrical conductivity measured in situ as the implantation proceeded, thus generating curves of sheet conductivity as a function of dose. The implanted titanium self-conglomerates into nanoparticles, and the spatial dimensions of the buried nanocomposite layer can thus be estimated from the implantation depth profile. Rutherford backscattering spectrometry was performed to measure the implantation depth profile, and was in good agreement with the calculated profile. Transmission electron microscopy of the titanium-implanted alumina was used for direct visualization of the nanoparticles formed. The measured conductivity of the buried layer is explained by percolation theory. We determine that the saturation dose, φ{sub 0}, the maximum implantation dose for which the nanocomposite material still remains a composite, is φ{sub 0} = 2.2 × 10{sup 16 }cm{sup −2}, and the corresponding saturation conductivity is σ{sub 0} = 480 S/m. The percolation dose φ{sub c}, below which the nanocomposite still has basically the conductivity of the alumina matrix, was found to be φ{sub c} = 0.84 × 10{sup 16 }cm{sup −2}. The experimental results are discussed and compared with a percolation theory model.

36 MATERIALS SCIENCE↗

The effects of laser pulse length and collisional ionization on the acceleration of titanium ions

Abstract The interaction of a relativistic laser pulse ( > 10 18 W cm −2 µ m 2 ) with foil targets can accelerate ions to energies of tens of MeV u −1 with optimized laser and target parameters. We report the results on simulations of the interaction of a 6.0 × 10 20 W cm −2 laser pulse incident on ultrathin (10–500 nm) titanium foils to investigate the roles of laser pulse duration and ionization mechanisms in the acceleration of titanium ions. While holding peak intensity constant, two laser pulse durations were investigated, 140 and 650 fs. The optimum thickness is dependent on pulse duration, as it requires the concurrence of target transparency with the incidence of the peak laser intensity. The collisional processes do not play a significant role in Ti ion beam generation from the 140 fs laser pulse duration at the optimum thickness (30 nm). However, for the 650 fs laser optimum, collisions improve the conversion efficiency of highly energetic ( > 10 MeV u −1 ), high charge titanium (Ti 21 − 22 + ) by a factor of 20, and the titanium ion cutoff energy by ∼15%. This improvement is due to the fact that collisional ionization increases the electron density of the plasma, which delays the time of relativistic transparency, causing collisions to decrease the optimum foil thickness from 150 to 100 nm. Additionally, collisional ionization increases the charge-to-mass ratio of the titanium, and injects more electrons into the accelerating sheath field. At the optimum thickness, target normal sheath acceleration is the dominant mechanism of acceleration, with additional contributions from radiation pressure and shock wave acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-driven acceleration of quasi-monoenergetic, near-collimated titanium ions via a transparency-enhanced acceleration scheme

Laser-driven ion acceleration has been an active research area in the past two decades with the prospects of designing novel and compact ion accelerators. Many potential applications in science and industry require high-quality, energetic ion beams with low divergence and narrow energy spread. Intense laser ion acceleration research strives to meet these challenges and may provide high charge state beams, with some successes for carbon and lighter ions. Here we demonstrate the generation of well collimated, quasi-monoenergetic titanium ions with energies ~145 and 180 MeV in experiments using the high-contrast(<10-9) and high-intensity (6× 1020 W cm-2) Trident laser and ultra-Thin (~100 nm) titanium foil targets. Numerical simulations show that the foils become transparent to the laser pulses, undergoing relativistically induced transparency (RIT), resulting in a two-stage acceleration process which lasts until ~2 ps after the onset of RIT. Such long acceleration time in the self-generated electric fields in the expanding plasma enables the formation of the quasi-monoenergetic peaks. This work contributes to the better understanding of the acceleration of heavier ions in the RIT regime, towards the development of next generation laser-based ion accelerators for various applications.

74 ATOMIC AND MOLECULAR PHYSICS↗

The response function of Fujifilm BAS-TR imaging plates to laser-accelerated titanium ions

Calibrated diagnostics for energetic particle detection allow for the systematic study of charged particle sources. The Fujifilm BAS-TR imaging plate (IP) is a reusable phosphorescent detector for radiation applications such as x-ray and particle beam detection. The BAS-TR IP has been absolutely calibrated to many low-Z (low proton number) ions, and extending these calibrations to the mid-Z regime is beneficial for the study of laser-driven ion sources. The Texas Petawatt Laser was used to generate energetic ions from a 100 nm titanium foil, and charge states Ti 10+ through Ti 12+ , ranging from 6 to 27 MeV, were analyzed for calibration. A plastic detector of CR-39 with evenly placed slots was mounted in front of the IP to count the number of ions that correspond with the IP levels of photo-stimulated luminescence (PSL). Here, a response curve was fitted to the data, yielding a model of the PSL signal vs ion energy. Comparisons to other published response curves are also presented, illustrating the trend of PSL/nucleon decreasing with increasing ion mass.

47 OTHER INSTRUMENTATION↗

The effect of pretreatment by titanium ion beam on the internal stresses and microstructure of the TiAlN coating obtained by magnetron sputtering

The increase in duration of titanum ion pretreatment of the substrate-austenitic steel leads to a decrease in the transverse dimensions of the nanocrystalline columnar coating Ti{sub 1−x}AlxN structure, emergence of ferritic layer between coating and substrate and an increase in the compressive macrostresses both in the coating and in the substrate.

36 MATERIALS SCIENCE↗

Understanding the Different Diffusion Mechanisms of Hydrated Protons and Potassium Ions in Titanium Carbide MXene

The high intercalation capacitance of MXenes is attractive, but their performance as electrodes in supercapacitors is limited by mass transport when increasing the thickness and mass loading of the electrodes. Here, we report a combined experimental and computational study, through which we reveal the diffusion of hydrated ionic species at the interlayer spaces. We find that the cyclic voltammetry curves for the delaminated Ti 3 C 2 T x exhibit distinct features in acid (H 2 SO 4 ) and alkaline (KOH) electrolytes. The DFT-calculated migration profile of K + and H + , in the presence and absence of water, suggests that the intercalated water molecules stabilize the charged ions, facilitating their diffusion from two dimension to three dimension manifested by the reduced activation barriers and movement pathways. In addition, we show that the diffusion of low and high concentrations of protons is significantly different. That is, protons of high concentrations can adsorb at both sides of the interlayer spaces, and water drives frequent proton hopping between stable adsorption sites as shown in the ab initio molecular dynamics simulations. The calculations can thus explain the varied capacitance and distorted CV curves when the experiments are conducted in acid and alkaline electrolytes. Furthermore, these results can provide the guidance to improve the fast transport of ions and electrons in MXenes with high mass loading.

25 ENERGY STORAGE↗

Contamination Effects of Getter Ion and Titanium Sublimation Pumped Systems on Optical Surfaces

Previous studies have indicated that ultraclean vacuum can be produced when titanium sublimation pumps are used in conjunction with getter-ion pumps. Experiments are described in which the degrees of cleanliness of a typical getter-ion, titanium sublimation-pumped system were monitored by measuring the effects of surface contamination on the reflectance of evaporated vacuum ultraviolet mirrors. Results are presented which indicate that severe reflectance losses occurred when startup of a getter-ion pump was initiated at too high a chamber pressure. Significant reflectance losses also occurred as a result of titanium sublimation-pump operation. These data are reviewed and recommendations for improved system performance are presented.

Visentine, James T.↗

Yields of clustered DNA damage induced by charged-particle radiations of similar kinetic energy per nucleon: LET dependence in different DNA microenvironments

To determine the linear energy transfer (LET) dependence of the biological effects of densely ionizing radiation in relation to changes in the ionization density along the track, we measured the yields and spectrum of clustered DNA damages induced by charged particles of different atomic number but similar kinetic energy per nucleon in different DNA microenvironments. Yeast DNA embedded in agarose in solutions of different free radical scavenging capacity was irradiated with 1 GeV protons, 1 GeV/nucleon oxygen ions, 980 MeV/nucleon titanium ions or 968 MeV/nucleon iron ions. The frequencies of double-strand breaks (DSBs), abasic sites and oxypurine clusters were quantified. The total DNA damage yields per absorbed dose induced in non-radioquenching solution decreased with LET, with minor variations in radioquenching conditions being detected. However, the total damage yields per particle fluence increased with LET in both conditions, indicating a higher efficiency per particle to induce clustered DNA damages. The yields of DSBs and non-DSB clusters as well as the damage spectra varied with LET and DNA milieu, suggesting the involvement of more than one mechanism in the formation of the different types of clustered damages.

59 BASIC BIOLOGICAL SCIENCES↗

Secondary electron emission characteristics of untreated and ion-textured titanium

Experimentally determined values of true secondary electron emission and relative values of reflected primary electron yield are presented for untreated (simply machined) and ion-textured, high-purity titanium over ranges of primary electron beam energies and beam impingement angles. The purpose of the investigation was to explore the feasibility of using titanium as electrode material in the multistage depressed collectors (MDC's) used in microwave amplifier traveling wave tubes (TWT's) for space communications and aircraft applications. Because of its relatively low density and thermal expansion characteristics and relatively high strength, thermal emissivity, and melting temperature, titanium presents itself as a possible candidate for the MDC electrode application. A detailed description of the method of ion texturing the titanium is included. Although the ion-treated surface considered in this study is not presented as being optimum from the standpoint of secondary electron emission suppression, it nevertheless serves to demonstrate that the surface can be modified by this procedure to significantly reduce these emission characteristics relative to those of the untreated surface. Further studies can reasonably be expected to produce surfaces with even lower secondary emission characteristics. The titanium surface were tested at primary electron beam energies of 200 to 2000 eV and at direct (0 deg) to near-grazing (85 deg) beam impingement angles. True secondary electron emission and relative reflected primary electron yield characteristics of the surfaces were compared with each other and with textured titanium surface exhibited secondary electron emission characteristics sharply lower than those exhibited by untreated titanium or copper. Clearly, then, in consideration of the secondary electron emission suppression of ion-textured titanium along with its other favorable physical properties, it must be included as a potential candidate for use as MDC electrode material in some applications.

Curren, Arthur N.↗

Structural and spectroscopic properties of high temperature prepared ZrO₂–TiO₂ mixed oxides

ZrO₂-TiO₂ mixed oxides of various composition, with the molar fraction of TiO₂ ranging from 0.1% to 15%, have been prepared via sol-gel synthesis and then calcined at 1273 K to check both their thermal stability and physicochemical properties. These solids are usually employed in photocatalytic processes and as active phase supports in heterogeneous catalysis. As indicated by X-ray diffraction and Raman spectroscopy, solid solutions based on Ti ions diluted in the ZrO₂ matrix are formed in the whole range of Ti molar fraction examined. Materials with low Ti loading (0.1%–1%) are basically constituted by the monoclinic phase of ZrO₂ while the tetragonal phase becomes prevalent at 15% of TiO₂ molar fraction. The presence of Ti ions modify the electronic structure of the solid as revealed by investigation of the optical properties. The typical band gap transition of ZrO₂ undergoes, in fact, a red shift roughly proportional to the Ti loading which reach the remarkable value of 1.6 eV for the sample with 10% of molar Ti concentration. Comparing chemical analysis of the solids with XPS data it has been put into evidence that the titanium ions distribution into the solid is not uniform and the concentration of Ti⁴⁺ tend to be higher in subsurface layers than in the crystal bulk. The introduction of titanium ions in the structure increases the reducibility of the solid. Annealing under vacuum at various temperatures causes oxygen depletion with consequent reduction of the solid which shows up mainly in terms of formation of Ti³⁺ reduced centres which are characterized by a typical EPR signal. Ti³⁺ defects forms, as also forecast by theoretical modelling of the solid, as their energy is lower than that of other possible reduced defective centers. The reduced solids are able to transfer electrons to adsorbed oxygen molecules in mild condition resulting in the formation of surface superoxide anions (O₂⁻) which are stabilized on surface Zr⁴⁺ or, alternatively, on Ti⁴⁺ ions according to the sample composition. - Graphical abstract: The presence of Ti in ZrO₂ modifies UV–vis and electronic properties of mixed oxides. Highlights: • ZrO₂–TiO₂ mixed oxides have been prepared via sol–gel synthesis. • Solids with low Ti loading are constituted by the monoclinic phase of ZrO₂. • The presence of Ti ions modify the electronic structure of the solid. • The introduction of titanium ions increases the reducibility of the solid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced visible-light absorption of mesoporous TiO2 by co-doping with transition-metal/nitrogen ions

Titanium (IV) oxide, TiO2, has been the object of intense scrutiny for energy applications. TiO2 is inexpensive, non-toxic, and has excellent corrosion resistance when exposed to electrolytes. A major drawback preventing the widespread use TiO2 for photolysis is its relatively large band gap of ~3eV. Only light with wavelengths shorter than 400 nm, which is in the ultraviolet portion of the spectrum, has sufficient energy to be absorbed. Less than 14 percent of the solar irradiation reaching the earth s surface has energy exceeding this band gap. Adding dopants such as transition metals has long been used to reduce the gap and increase photocatalytic activity by accessing the visible part of the solar spectrum. The degree to which the band gap is reduced using transition metals depends in part on the overlap of the d-orbitals of the transition metals with the oxygen p-orbitals. Therefore, doping with anions such as nitrogen to modify the cation-anion orbital overlap is another approach to reduce the gap. Recent studies suggest that using a combination of transition metals and nitrogen as dopants is more effective at introducing intermediate states within the band gap, effectively narrowing it. Here we report the synthesis of mesoporous TiO2 spheres, co-doped with transition metals and nitrogen that exhibit a nearly flat absorbance response across the visible spectrum extending into the near infrared.

Mathis, John↗

Ion Engine Grid Gap Measurements

A simple technique for measuring the grid gap of an ion engine s ion optics during startup and steady-state operation was demonstrated with beam extraction. The grid gap at the center of the ion optics assembly was measured with a long distance microscope that was focused onto an alumina pin that protruded through the center accelerator grid aperture and was mechanically attached to the screen grid. This measurement technique was successfully applied to a 30 cm titanium ion optics assembly mounted onto an NSTAR engineering model ion engine. The grid gap and each grid s movement during startup from room temperature to both full and low power were measured. The grid gaps with and without beam extraction were found to be significantly different. The grid gaps at the ion optics center were both significantly smaller than the cold grid gap and different at the two power levels examined. To avoid issues associated with a small grid gap during thruster startup with titanium ion optics, a simple method was to operate the thruster initially without beam extraction to heat the ion optics. Another possible method is to apply high voltage to the grids prior to igniting the discharge because power deposition to the grids from the plasma is lower with beam extraction than without. Further testing would be required to confirm this approach.

Soulas, Gerge C.↗

Introduction of oxygen vacancies and fluorine into TiO{sub 2} nanoparticles by co-milling with PTFE

Solid-state processes of introducing oxygen vacancies and transference of fluorine to n-TiO{sub 2} nanoparticles by co-milling with poly(tetrafluoroethylene) (PTFE) powder were examined by diffuse reflectance spectroscopy (DRS) of UV, visual, near- and mid-IR regions, thermal analyses (TG-DTA), energy-dispersive X-ray spectroscopy (EDXS), X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The broad absorption peak at around 8800 cm{sup -1} (1140 nm) was attributed to the change in the electronic states, viz. electrons trapped at the oxygen vacancies (Vo) and d-d transitions of titanium ions. Incorporation of fluorine into n-TiO{sub 2} was concentrated at the near surface region and amounted to ca. 40 at% of the total fluorine in PTFE, after co-milling for 3 h, as confirmed by the F1s XPS spectrum. The overall atomic ratio, F/Ti, determined by EDXS was 0.294. By combining these analytical results, a mechanism of the present solid state processes at the boundary between PTFE and n-TiO{sub 2} was proposed. The entire process is triggered by the partial oxidative decomposition of PTFE. This is accompanied by the abstraction of oxygen atoms from the n-TiO{sub 2} lattices. Loss of the oxygen atoms results in the formation of the diverse states of locally distorted coordination units of titania, i.e. TiO{sub 6-n}Vo{sub n}, located at the near surface region. This leads subsequent partial ligand exchange between F and O, to incorporate fluorine preferentially to the near surface region of n-TiO{sub 2} particles, where local non-crystalline states predominate. - Graphical abstract: Scheme of the reaction processes: (a) pristine mixture, (b) oxygen abstraction from TiO{sub 2} and (c) fluorine migration from PTFE to TiO{sub 2}. Highlights: Transfer of fluorine from PTFE to n-TiO{sub 2} in a dry solid state process was confirmed. Black-Right-Pointing-Pointer 40% of F in PTFE was incorporated to the near surface region of n-TiO{sub 2} nanoparticles. Black-Right-Pointing-Pointer The transfer process is triggered by the oxidative decomposition of PTFE. Black-Right-Pointing-Pointer Fluorine incorporation is mediated by the formation of oxygen vacancies. Black-Right-Pointing-Pointer The sequential mechanisms are verified by XPS, EDXS, HRTEM, TG and DRS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗