Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TITANIUM 45”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Preparation of Radiopharmaceuticals Labeled with Metal Radionuclides

The overall goal of this project was to develop methods for the production of metal-based radionuclides, to develop metal-based radiopharmaceuticals and in a limited number of cases, to translate these agents to the clinical situation. Initial work concentrated on the application of the radionuclides of Cu, Cu-60, Cu-61 and Cu-64, as well as application of Ga-68 radiopharmaceuticals. Initially Cu-64 was produced at the Missouri University Research Reactor and experiments carried out at Washington University. A limited number of studies were carried out utilizing Cu-62, a generator produced radionuclide produced by Mallinckrodt Inc. (now Covidien). In these studies, copper-62-labeled pyruvaldehyde Bis(N{sup 4}-methylthiosemicarbazonato)-copper(II) was studied as an agent for cerebral myocardial perfusion. A remote system for the production of this radiopharmaceutical was developed and a limited number of patient studies carried out with this agent. Various other copper radiopharmaceuticals were investigated, these included copper labeled blood imaging agents as well as Cu-64 labeled antibodies. Cu-64 labeled antibodies targeting colon cancer were translated to the human situation. Cu-64 was also used to label peptides (Cu-64 octriatide) and this is one of the first applications of a peptide radiolabeled with a positron emitting metal radionuclide. Investigations were then pursued on the preparation of the copper radionuclides on a small biomedical cyclotron. A system for the production of high specific activity Cu-64 was developed and initially the Cu-64 was utilized to study the hypoxic imaging agent Cu-64 ATSM. Utilizing the same target system, other positron emitting metal radionuclides were produced, these were Y-86 and Ga-66. Radiopharmaceuticals were labeled utilizing both of these radionuclides. Many studies were carried out in animal models on the uptake of Cu-ATSM in hypoxic tissue. The hypothesis is that Cu-ATSM retention in vivo is dependent upon the oxygen retention of the tissue and the significantly greater retention amounting in hypoxic tissue. This hypothesis was confirmed in a series of animal studies. Cu-64 can be used both as an imaging radionuclide and a therapeutic radionuclide. The therapeutic efficacy of Cu-64 ATSM was proven in hamsters bearing the CW39 human colorectal tumors. The administration of Cu-64 ATSM significantly increased the survival time of tumor-bearing animals with no acute toxicity. This copper agent therefore shows promise for radiotherapy. The flow tracer Cu-64 PTSM also demonstrates therapeutic potential by inhibiting cancer cells implanted in animal models. Again, this inhibition occurred at doses which showed no sign of toxicity to the animals. Cu-ATSM was translated to humans, under other support a series of tumors were investigated; these included head and neck cancer, non-small cell lung cancer, cervical cancer and renal cancer. Another radionuclide that was investigated was titanium 45. This radionuclide was successfully produced by radiation of a scandium foil with 15 MeV protons. The titanium 45 was processed and separated from residual scandium by high exchange chomotrophy. Titanium titanocene has been utilized as a therapeutic agent; this compound was prepared and studied in vitro and in vivo. Another project was the preparation of cyclodextrin dimers as a new pre-targeting approach for tumor uptake. Beta-cyclodextradin and two other dimers were synthesized. These dimers were studied for the in vivo application. Work continued on the application of the radionuclide already discussed. Technetium 94m, a positron emitting radionuclide of the widely used 99m Tc nuclide was also prepared. This allows the quantification of the uptake of technetium radiopharmaceuticals. In collaboration with Professor David Piwnica-Worms, technetium 94m, sestamibi was studied in animal models and in a limited number of human subjects.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Nuclear Data Sheets for A = 45

The Interim Evaluations for A = 45 based on the 1992 Nuclear Data Sheets Update for A = 45 (1992Bu01, literature cutoff date of November 27, 1991) have been revised using experimental decay and reaction data received by October 30, 2007.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Extraction of thermal and electromagnetic properties in {sup 45}Ti

The level density and {gamma}-ray strength function of {sup 45}Ti have been determined by use of the Oslo method. The particle-{gamma} coincidences from the {sup 46}Ti(p,d{gamma}){sup 45}Ti pick-up reaction with 32-MeV protons are utilized to obtain {gamma}-ray spectra as function of excitation energy. The extracted level density and strength function are compared with models, which are found to describe these quantities satisfactorily. The data do reveal no single-particle energy gaps of the underlying doubly magic {sup 40}Ca core, probably due to the strong quadruple deformation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SU-E-T-44: Angular Dependence of Surface Dose Enhancement Measured On Several Inhomogeneities Using Radiochromic EBT3 Films

Purpose: The quantification of the relative surface dose enhancement in dependence on the angle of incidence and the atomic number Z of the surface material. Methods: Experiments were performed with slabs made of aluminum, titanium, copper, silver, dental gold and lead. The metal slabs with equal sizes of 1.0×8.0×8.8mm{sup 3} were embedded in an Octavius 4D phantom (PTW Freiburg, Germany). Radiochromic EBT3 films were used to measure the surface dose for angles of incidence ranging from 0° to 90°. The setup with the metals slabs at the isocenter was irradiated with acceleration voltages of 6MV and 10MV. Water reference measurements were taken under equal conditions. Results: The surface dose enhancement is highest for angles of incidence below 30° and drops significantly for higher. The surface dose enhancement produced by lead and dental gold at 6MV showed a peak of 65%. At 90°, the surface dose enhancement dropped to 15% for both materials. The surface dose enhancements for silver, copper, titanium and aluminum were 45%, 32%, 22% and 12% at 0°, respectively. At an angle of incidence of 80°, the values dropped to 22%, 18%, 12% und 6%. The values for 10MV were very similar. Lead and dental gold showed peaks of 65% und 60%. Their values dropped to 18% at an angle of 90°. The surface dose enhancements for silver, copper, titanium and aluminum were 45%, 30%, 20% and 8% at 0°. At 80° the values dropped to 30%, 20%, 12% and 5%. A dependence of the magnitude of the surface dose enhancement on the atomic number of the surface material can be seen, which is in consistence with literature. Conclusion: The results show that the surface dose enhancements near implant materials with high Z-values should be taken into consideration in radio therapy, even when the angle of incidence is flat.

60 APPLIED LIFE SCIENCES↗

Tool path influence on electric pulse aided deformation during incremental sheet metal forming

Titanium and its alloys are difficult to form at room temperature due to their high flow stress. Super plastic deformation of Ti alloys involves low strain rate forming at very high temperatures which need special tooling which can withstand high temperatures. It was observed that when high current density electric pulse is applied during deformation it reduces the flow stress through electron-dislocation interaction. This phenomenon is known as electro-plasticity. In the present work, importance of tool configuration to enhance the formability without much resistive heating is demonstrated for Incremental Sheet Metal Forming (ISMF). Tool configuration is selected to minimize the current carrying zone in DC pulse aided incremental forming to enhance the formability due to electro plasticity and the same is demonstrated by forming two pyramid shaped components of 30° and 45° wall angles using a Titanium alloy sheet of 0.6 mm thickness. Load measurement indicated that a critical current density is essential for the electro-plasticity to be effective and the same is realized with the load and temperature measurements.

36 MATERIALS SCIENCE↗

Strength and elastic moduli of TiN from radial x-ray diffraction under nonhydrostatic compression up to 45 GPa

The high pressure behavior of titanium nitride (TiN) was investigated using synchrotron radial x-ray diffraction (RXRD) under nonhydrostatic compression up to 45.4 GPa in a diamond-anvil cell. We obtained the hydrostatic compression equation of state of TiN. Fitting to the third-order Birch-Murnaghan equation of state, the bulk modulus derived from nonhydrostatic compression data varies from 232 to 353 GPa, depending on angle {Psi}, the orientation of the diffraction planes with respect to the loading axis. The RXRD data obtained at {Psi} = 54.7{sup o} yield a bulk modulus K{sub 0} = 282 {+-} 9 GPa with pressure derivative K{prime}{sub 0} fixed at 4. We have analyzed the deformation mechanisms by analyzing the (111), (200), (220), (311), and (222) peaks in the x-ray diffraction under pressures. The ratio of uniaxial stress component to shear modulus t/G ranges from 0.007-0.027 at the pressure of 6.4-45.4 GPa. It was found that the TiN sample could support a maximum uniaxial stress component t of 8.6 GPa, when it started to yield at 45.4 GPa under uniaxial compression. And the aggregate elastic moduli of TiN at high pressure were determined from the synchrotron RXRD measurements.

43 PARTICLE ACCELERATORS↗

Selective catalytic reduction system and process for treating NOx emissions using a zinc or titanium promoted palladium-zirconium catalyst

A process and system (18) for reducing NO.sub.x in a gas using hydrogen as a reducing agent is provided. The process comprises contacting the gas stream (29) with a catalyst system (38) comprising sulfated zirconia washcoat particles (41), palladium, a pre-sulfated zirconia binder (44), and a promoter (45) comprising at least one of titanium, zinc, or a mixture thereof. The presence of zinc or titanium increases the resistance of the catalyst system to a sulfur and water-containing gas stream.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compaction of Titanium Powders

Accurate modeling of powder densification has been an area of active research for more than 60 years. The earliest efforts were focused on linearization of the data because computers were not readily available to assist with curve-fitting methods. In this work, eight different titanium powders (three different sizes of sponge fines<150 {micro}m,<75 {micro}m, and<45 {micro}m; two different sizes of a hydride-dehydride [HDH]<75 {micro}m and<45 {micro}m; an atomized powder; a commercially pure [CP] Ti powder from International Titanium Powder [ITP]; and a Ti 6 4 alloy powder) were cold pressed in a single-acting die instrumented to collect stress and deformation data during compaction. From these data, the density of each compact was calculated and then plotted as a function of pressure. The results show that densification of all the powders, regardless of particle size, shape, or chemistry, can be modeled accurately as the sum of an initial density plus the sum of a rearrangement term and a work-hardening term. These last two terms are found to be a function of applied pressure and take the form of an exponential rise.

36 MATERIALS SCIENCE↗

Study of 1–8 keV K-α x-ray emission from high intensity femtosecond laser produced plasma

We report an experimental study on the optimization of a laser plasma based x-ray source of ultra-short duration K-α line radiation. The interaction of pulses from a CPA based Ti:sapphire laser (10 TW, 45 fs, 10 Hz) system with magnesium, titanium, iron and copper solid target generates bright 1-8 keV K-α x-ray radiation. The x-ray yield was optimized with the laser pulse duration (at fixed fluence) which is varied in the range of 45 fs to 1.4 ps. It showed a maximum at laser pulse duration of ∼740 fs, 420 fs, 350 and 250 fs for Mg (1.3 keV), Ti (4.5 keV), Fe (6.4 keV) and Cu (8.05 keV) respectively. The x-ray yield is observed to be independent of the sign of the chirp. The scaling of the K-α yield (I{sub x} ∝ I{sub L}{sup β}) for 45 fs and optimized pulse duration were measured for laser intensities in the region of 3 × 10{sup 14} – 8 × 10{sup 17}. The x-ray yield shows a much faster scaling exponent β = 1.5, 2.1, 2.4 and 2.6 for Mg, Ti, Fe and Cu respectively at optimized pulse duration compared to scaling exponent of 0.65, 1.3, 1.5, and 1.7 obtained for 45 fs duration laser pulses. The laser to x-ray energy conversion efficiencies obtained for different target materials are η{sub Mg} = 1.2 × 10{sup −5}, η{sub Ti} = 3.1 × 10{sup −5}, η{sub Fe} = 2.7 × 10{sup −5}, η{sub Cu} = 1.9 × 10{sup −5}. The results have been explained from the efficient generation of optimal energy hot electrons at longer laser pulse duration. The faster scaling observed at optimal pulse duration indicates that the x-ray source is generated at the target surface and saturation of x-ray emission would appear at larger laser fluence. An example of utilization of the source for measurement of shock-wave profiles in a silicon crystal by time resolved x-ray diffraction is also presented.

36 MATERIALS SCIENCE↗

Level densities of {sup 44}Sc and {sup 47}Ti from different experimental techniques

The level densities of {sup 44}Sc and {sup 47}Ti have been determined from measurements of particle evaporation spectra from the compound nuclear reaction {sup 3}He+{sup 45}Sc with an 11 MeV {sup 3}He beam. The level density of {sup 44}Sc has been compared to the level density obtained from an independent experimental method based on an analysis of {alpha}-{gamma} coincidences from the transfer reaction {sup 45}Sc({sup 3}He,{alpha}{gamma}){sup 44}Sc. The good agreement between the two experiments indicates the reliability of the level density obtained. Some level density systematics have been tested against the experimental data. New Fermi-gas level density parameters have been derived.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ultra-thin targets or target-backings for accelerator

A procedure has been developed for fabrication of ultra-thin titanium foils for accelerator-based experiments. Evaporation of thin titanium layers on thin copper foils allows mechanical manipulation of the layered-foil prior to dissolution of the copper layer which leaves the thin titanium foil attached to a target frame. This is the rst time that thin titanium foils have been produced in this manner. Electrodeposition techniques can be used to result in radioactive deposits being placed ultimately on an ultra-thin titanium backing. This method was used in the past for thin nickel foils, but has been "lost" due to the companies that used to manufacture such foils not being in business any more, removing the source of copper backed foils from the market. The technique can be used for thin nickel or chromium foils, as well as several other types of foils. Titanium foils as thin as 100 nm (45 μg/cm 2 ), nickel foils as thin as 50 nm (45 μg/cm 2 ), and chromium foils as thin as 400 nm (290 μg/cm 2 ) have been successfully attached to stainless steel target frames.

36 MATERIALS SCIENCE↗

Thermophysical and gas-dynamic characteristics of laser-induced gasplasma flows under femtosecond laser ablation of titanium in vacuum

We report the results of experimental investigation of thermophysical and gas-dynamic characteristics of the gas-plasma flows induced by ultrashort (45 – 60 fs) laser pulse irradiation (the radiation wavelength λ = 400, 800 nm) of a titanium target in vacuum (∼5 × 10{sup -4} mbar). The use of combined interferometric technique and complex experimental data processing allowed us to estimate the momentum coupling coefficient (C{sub m} ∼ 10{sup -4} N W{sup -1}), the efficiency of laser energy conversion to the kinetic energy of the gas-plasma flow (65% – 85%), the spatiotemporal distributions of the particle density (n{sub e} = 10{sup 18} – 10{sup 20} cm{sup -3}) and velocity ((v)=4 – 9 km s{sup -1}), the static (10{sup 6} – 10{sup 8} Pa) and total (10{sup 7} – 10{sup 11} Pa) pressure and temperature (T=7 – 50 kK) in the flow. Our data are compared with published data obtained by other methods. (interaction of laser radiation with matter. laser plasma)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding the impact of the gas diffusion layer structure on catalyst utilization in the PEM water electrolyzer

A multiphysics half-cell model of a polymer electrolyte membrane water electrolyzer (PEMWE) was developed to probe impacts of the detailed 3-dimensional pore structure of the gas diffusion layer (GDL) on performance characteristics. We show that pores in the titanium GDL mesh led to significant underutilization of the catalyst layer (CL), with only 45% of the catalyst effectively utilized. This contradicts the assumption of uniform electron flow across the CL, as shown in graphical abstract (a), as near-zero current was observed near GDL pore regions and the current distribution in CL was influenced by GDL structure, as shown in graphical abstract (b). Instead, oxygen generation was primarily concentrated under the solid titanium regions, diffusing out around the pore walls. High current density peaks were also noted at the GDL-catalyst contact, correlating with degradation hotspots that were directly observed in companion experiments, as shown in graphical abstract (c). Collectively, these findings point to the critical importance of the heterogeneous GDL porous architecture not only for PEMWE efficiency but also for uneven degradation of the CL.

COMSOL↗

Special Aspects of Microstructure, Deformation and Fracture of Bioinert Zirconium and Titanium-Niobium Alloys in Different Structural States

The characteristics of microstructure, deformation and fracture of Zr – 1 wt% Nb and Ti – 45 wt% Nb bioinert alloys in the coarse- and ultrafine-grained states are investigated. It is shown that the ultrafine-grained structure formed in them ensures excellent mechanical properties of the alloys and affects the stages of the stress-strain curves and the behavior of the maximum temperature vs. deformation time plot. The formation of an α-phase in the Ti – 45 wt% Nb ultrafine-grained alloy suppresses the linear stage VI characterized by a constant strain hardening coefficient. In stage VII, the strain hardening coefficient rapidly becomes negative, which indicates the material softening prior to its failure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TRENDS IN {sup 44}Ti AND {sup 56}Ni FROM CORE-COLLAPSE SUPERNOVAE

We compare the yields of {sup 44}Ti and {sup 56}Ni produced from post-processing the thermodynamic trajectories from three different core-collapse models-a Cassiopeia A progenitor, a double shock hypernova progenitor, and a rotating two-dimensional explosion-with the yields from exponential and power-law trajectories. The peak temperatures and densities achieved in these core-collapse models span several of the distinct nucleosynthesis regions we identify, resulting in different trends in the {sup 44}Ti and {sup 56}Ni yields for different mass elements. The {sup 44}Ti and {sup 56}Ni mass fraction profiles from the exponential and power-law profiles generally explain the tendencies of the post-processed yields, depending on which regions are traversed by the model. We find that integrated yields of {sup 44}Ti and {sup 56}Ni from the exponential and power-law trajectories are generally within a factor two or less of the post-process yields. We also analyze the influence of specific nuclear reactions on the {sup 44}Ti and {sup 56}Ni abundance evolution. Reactions that affect all yields globally are the 3{alpha}, p(e{sup -}, {nu}{sub e})n and n(e{sup +},{nu}-bar{sub e})p. The rest of the reactions are ranked according to their degree of impact on the synthesis of {sup 44}Ti. The primary ones include {sup 44}Ti({alpha}, p){sup 47}V, {sup 40}Ca({alpha}, {gamma}){sup 44}Ti, {sup 45}V(p, {gamma}){sup 46}Cr, {sup 40}Ca({alpha}, p){sup 43}Sc, {sup 17}F({alpha}, p){sup 20}Ne, {sup 21}Na({alpha}, p){sup 24}Mg, {sup 41}Sc(p, {gamma}){sup 42}Ti, {sup 43}Sc(p, {gamma}){sup 44}Ti, {sup 44}Ti(p, {gamma}){sup 45}V, and {sup 57}Ni(p, {gamma}){sup 58}Cu, along with numerous weak reactions. Our analysis suggests that not all {sup 44}Ti need to be produced in an {alpha}-rich freeze-out in core-collapse events, and that reaction rate equilibria in combination with timescale effects for the expansion profile may account for the paucity of {sup 44}Ti observed in supernova remnants.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Expectation vs. Reality: The Unexpected Abrasive Nature of Biomass Feedstocks

Early reports coming from stover-fed biorefineries have indicated that the feedstock is damaging equipment due to wear caused by the feedstock. It is suspected that biomass ash, both physiological and introduced ash, is responsible for the accelerated rates of wear being observed. Biomass ash can contain several different types of minerals, some of which are very hard. To simulate biomass wear on material handling equipment, a sandblaster was modified to shoot ground biomass at a metal coupon. The angle of impingement was set at 90°, 65.5°, or 45° by rotating the coupon. The coupon was weighed before and after shooting a known quantity of biomass to determine mass loss, and the surface characteristics of the blasted coupon were analyzed using laser microscopy. Coupon mass loss was positively correlated with ash content. Coupons blasted with loblolly pine (0.58% ash) lost 2.2mg±0.3mg per kg biomass shot, while high-ash stover (12.56% ash) coupons lost 104.7±2.1mg per kg biomass shot. Coupons blasted with NaOH leached low-ash stover (4.01% ash) lost 10.1±2.7mg per kg biomass shot. Decreasing the angle of impingement (90° to 45°) increased mass loss by about 17%. The concentrations of soil elements (silicon, aluminum, iron, titanium, sodium) were positively correlated with coupon mass loss, indicating that introduced ash is likely the primary source of wear to equipment. Future studies will identify mineral forms of ash present in biomass to further characterize biomass wear properties and to identify strategies to improve biomass quality.

09 BIOMASS FUELS↗

Structural characterization and electronic structure of laser treated TiN thin film

TiN thin films prepared by laser treatment using Kr-F excimer laser in the controlled atmosphere. The depth distribution and composition of nitrogen and contaminated oxygen have been determined by non-Rutherford proton backscattering using 1.7 MeV Tendetron accelerator. The electronic structure of TiN thin film have been characterized by resonant photoelectron spectroscopy using indus-I synchrotron radiation. Specifically, complex resonance profile that shows the enhancement at 45 eV which is consistent with the resonant photoemission of Ti 3d states involved in the Titanium nitride and oxide.

36 MATERIALS SCIENCE↗

Crystallographic Features of the α-Phase Structure in Hafnium and Hafnium–Titanium Alloys

The structure of a hafnium crystal undergoing β → α (bcc → hcp) polymorphic transformation upon gradual cooling and the structure of Hf{sub 55}Ti{sub 45} and Hf{sub 30}Ti{sub 70} alloys formed under various kinetic conditions of polymorphic transformation are studied. The structure of the α phase in cast hafnium is shown to consist of lath crystals grouped into packets. The misorientations between separate laths in a packet are less than 1°. The Hf–Ti alloys in the cast state exhibit a mixed structure consisting of α-phase crystals of several morphological types. A structure of packet martensite is observed in the Hf–Ti alloys after quenching. Each packet includes laths of several crystallographic orientations. There is no regular alternation of differently orientated laths in the packet. The same set of α-phase orientations within an initial β-phase grain is observed independently of the cooling rate of the Hf–Ti alloys upon β → α polymorphic transformation. The misorientation of substructural elements within an α-phase crystal in the Hf–Ti alloys is ~5° for the cast state and ~2.2° after quenching.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗