Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TIN 103”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A = 103

The 2001 evaluation on mass A = 103 (2001De37) has been revised, taking into account all data available before March 2009. Experimental information is presented from the neutron rich nucleus {sup 103}Sr to the neutron deficient {sup 103}Sn nucleus. The experimental information on excited states for {sup 103}Sr and {sup 103}y is very scarce New (HI, xn{gamma}) data sets for several nuclides have been evaluated and new and more accurate data for {gamma} intensities and multipolarities obtained. The BRICC code has been used for the calculation of conversion coefficients.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Orbital Dependent Nucleonic Pairing in the Lightest Known Isotopes of Tin

By studying the {sup 109}Xe {yields} {sup 105}Te {yields} {sup 101}Sn superallowed {alpha}-decay chain, we observe low-lying states in {sup 101}Sn, the one-neutron system outside doubly magic {sup 100}Sn. We find that the spins of the ground state (J=7/2) and first excited state (J=5/2) in {sup 101}Sn are reversed with respect to the traditional level ordering postulated for {sup 103}Sn and the heavier tin isotopes. Through simple arguments and state-of-the-art shell-model calculations we explain this unexpected switch in terms of a transition from the single-particle regime to the collective mode in which orbital-dependent pairing correlations dominate.

74 ATOMIC AND MOLECULAR PHYSICS↗

Halving the Casimir force with conductive oxides: Experimental details

This work is an extended version of a paper published previously [S. de Man et al., Phys. Rev. Lett. 103, 040402 (2009)], where we presented measurements of the Casimir force between a gold-coated sphere and a plate coated with either gold or an indium tin oxide (I TO) layer. The experiment, which was performed in air, showed that I TO conducts sufficiently to prevent charge accumulation but is still transparent enough to halve the Casimir attraction when compared to gold. Here we report all the experimental details that, owing to the limited space available, were omitted in the previous article. We discuss the performance of our setup in terms of stability of the calibration procedure and reproducibility of the Casimir force measurement. We also introduce and demonstrate a technique to obtain the spring constant of our force sensor. Furthermore, we present a thorough description of the experimental method, a comprehensive explanation of data elaboration and error analysis, and a complete characterization of the dielectric function and of the surface roughness of the samples used in the actual experiment.

74 ATOMIC AND MOLECULAR PHYSICS↗

Anomalous Thermal Behavior in Microcalorimeter Gamma-Ray Detectors

Improving the resolution of gamma-ray detectors is important for many fields, including determinations of the Lamb shift in atoms with high atomic numbers, nuclear treaty verification, and environmental monitoring. High-purity germanium detectors are currently the tool of choice for precision gamma-ray spectroscopy. The resolution of these detectors is limited to about 500 eV full-width-at-half-maximum at 100 keV by Fano statistics. In comparison, low-temperature microcalorimeters can provide over an order of magnitude improvement in photon resolution. For instance, a gamma-ray microcalorimeter has achieved 25 eV FWHM resolution at 103 keV. These calorimeters consist of two components, a bulk absorber to stop incident gamma rays and a thermometer made from a thin film electrically biased in the superconducting-to-normal phase transition, called a Transition Edge Sensor, or TES. The standard absorber is bulk, superconducting tin. While tin has historically been the best performing absorber, pulse decays in Sn devices are much slower than predicted. We have begun a systematic study of absorber behavior in order to assess and improve response times. This study leverages two capabilities: the ability to microfabricate highly uniform arrays of gamma-ray detectors and the ability to read out many detectors in a single cool-down using SQUID multiplexer circuits. Here, we present two experiments to identify the source of thermal time constants. The first involves varying properties of the Sn absorber including purity, vendor, and crystal grain size. The second examines the role of the other elements in the microcalorimeter assembly.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Much simplified ion-beam assisted deposition-TiN template for high-performance coated conductors

A much simplified template, i.e., two nonsuperconducting layers between the superconducting YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) and the polycrystalline metal substrate, has been developed for high-performance coated conductors by using biaxially aligned TiN as a seed layer. A combination of a thin TiN ({approx}10 nm by ion-beam assisted deposition) layer and an epitaxial buffer LaMnO{sub 3} layer ({approx}120 nm) allows us to grow epitaxial YBCO films with values of full width at half-maximum around 3.5 deg. and 1.7 deg. for the {phi}-scan of (103) and rocking curve of (005) YBCO, respectively. The YBCO films grown on electropolished polycrystalline Hastelloy using this two-layer template exhibited a superconducting transition temperature of 89.5 K, a critical current density of 1.2 MA/cm{sup 2} at 75.5 K, and an {alpha} value (proportional factor of critical current density J{sub c}{approx}H{sup -}{alpha}) of around 0.33, indicating a high density of pinning centers and an absence of weak links.

36 MATERIALS SCIENCE↗

Penning trap mass measurements of {sup 99-109}Cd with the ISOLTRAP mass spectrometer, and implications for the rp process

Penning trap mass measurements of neutron-deficient Cd isotopes {sup 99-109}Cd have been performed with the ISOLTRAP mass spectrometer at ISOLDE/CERN, all with relative mass uncertainties below 3{center_dot}10{sup -8}. A new mass evaluation has been performed. The mass of {sup 99}Cd has been determined for the first time, which extends the region of accurately known mass values toward the doubly magic nucleus {sup 100}Sn. The implication of the results on the reaction path of the rp process in stellar x-ray bursts is discussed. In particular, the uncertainty of the abundance and the overproduction created by the rp-process for the mass A=99 are demonstrated by reducing the uncertainty of the proton-separation energy of {sup 100}InS{sub p}({sup 100}In) by a factor of 2.5.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electron transport properties of antimony doped SnO{sub 2} single crystalline thin films grown by plasma-assisted molecular beam epitaxy

By antimony doping tin oxide, SnO{sub 2}:Sb (ATO), below 1.0% Sb concentration, controllable n-type doping was realized. Plasma-assisted molecular beam epitaxy has been used to grow high quality single crystalline epitaxial thin films of unintentionally doped (UID) and Sb-doped SnO{sub 2} on r-plane sapphire substrates. A UID thickness series showed an electron concentration of 7.9x10{sup 18} cm{sup -3} for a 26 nm film, which decreased to 2.7x10{sup 17} cm{sup -3} for a 1570 nm film, whereas the mobility increased from 15 to 103 cm{sup 2}/V s, respectively. This series illustrated the importance of a buffer layer to separate unintentional heterointerface effects from the effect of low Sb doping. Unambiguous bulk electron doping was established by keeping the Sb concentration constant but changing the Sb-doped layer thickness. A separate doping series correlated Sb concentration and bulk electron doping. Films containing between 9.8x10{sup 17} and 2.8x10{sup 20} Sb atoms/cm{sup 3} generated an electron concentration of 1.1x10{sup 18}-2.6x10{sup 20} cm{sup -3}. As the atomic Sb concentration increased, the mobility and resistivity decreased from 110 to 36 cm{sup 2}/V s and 5.1x10{sup -2} to 6.7x10{sup -4} OMEGA cm, respectively. The Sb concentration was determined by secondary ion mass spectrometry. X-ray diffraction and atomic force microscopy measurements showed no detrimental effects arising from the highest levels of Sb incorporation. Temperature dependent Hall measurements established a lower limit for the Sb electron activation energy of 13.2 meV and found that films with greater than 4.9x10{sup 19} electrons/cm{sup 3} were degenerately doped. Within experimental uncertainties, 100% donor efficiency was determined for Sb-doped SnO{sub 2} in the range studied.

36 MATERIALS SCIENCE↗