Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TELLURIUM 111”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A = 111

This evaluation for A = 111 updates one by J. Blachot, (2003Bl10), published in Nuclear Data Sheets 100, 179 (2003)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Stabilization of a monolayer tellurene phase at CdTe interfaces

Two-dimensional (2D) materials provide a plethora of novel condensed matter physics and are the new playground in materials science, offering potentially vast applications. One of the critical hurdles for many 2D systems is the synthesis of these low-dimensional systems as well as the prediction and identification of new candidates. Herein, a self-assembly of a monolayer tellurene by bonding CdTe wafers is demonstrated for the first time. The conventional applications of wafer-bonding range from the production of microelectromechanical systems to the synthesis of lattice-mismatched multi-junction photovoltaics. Due to the heterogeneous materials that are typically employed, the bond-interface usually contains a thin amorphous layer or arrays of dislocations. Such an interface is thus itself inactive and in many cases has detrimental effects on the device. The new material phase stabilized in this work consists of an undulating monolayer of tellurium atoms covalently bonded to {111} Cd-terminated CdTe wafer surfaces. First-principles calculations and experimentally observed changes in the localized plasmon excitation energy indicate the clear rearrangement of the underlying band-structure suggesting a metallic character, bands showing linear dispersion, and a significant asymmetric spin-band splitting. The I–V characteristics show the presence of a highly conductive pathway that lowers the resistivity by three orders of magnitude, as compared to bulk CdTe, which can be attributed to the tellurium monolayer. The findings indicate that suitably chosen crystallographic wafer surfaces can act as structural templates allowing the production of exotic phases. Furthermore, the presently stabilized monolayer is an addition to the family of tellurene variants, providing new insights into the fundamental properties of this and other emerging 2D materials, while attracting attention to the unusual side of the wafer-bonding technology exemplified in this study.

14 SOLAR ENERGY↗

Te/CdTe and Al/CdTe Interfacial Energy Band Alignment by Atomistic Modeling

A synergistic approach that incorporates first-principles atomistic modeling with numerical device simulations is used to systematically evaluate the role of heterointerfaces within metal-chalcogenide-based photovoltaic technologies. Two interfaces involving either a tellurium back contact or aluminum back electrode combined with a cadmium telluride absorber layer within cadmium-telluride-based thin-film solar cells are investigated on an atomic scale to determine the mechanisms contributing to variations in device performance. Electronic structures and predicted charge transport behavior with respect to cadmium and tellurium termination of the absorber layer are studied along the polar oriented CdTe{111} facets. The computational methodology reveals a noticeable contrast between the Schottky barrier forming Al/CdTe interface versus the Type I Te/CdTe heterojunction. Greater band bending features are exhibited by the cadmium termination as opposed to the tellurium termination for each interface case. Subsequent device modeling suggests that 3.6% higher photovoltaic conversion efficiency is achievable for the cadmium termination relative to the tellurium termination of the Te/CdTe interface. Based strictly on an idealistic representation, both interface models show the importance of atomic-scale interfacial properties for cadmium telluride solar cell device performance with their bulk properties being validated in comparison to published experimental data. Here, the synergistic approach offers a suitable method to analyze solar cell interfaces through a predictive computational framework for the engineering and optimization of metal-chalcogenide-based thin-film photovoltaic technologies.

Green’s function↗

Te-doping of self-catalyzed GaAs nanowires

Tellurium (Te)-doping of self-catalyzed GaAs nanowires (NWs) grown by molecular beam epitaxy is reported. The effect of Te-doping on the morphological and crystal structure of the NWs is investigated by scanning electron microscopy and high-resolution transmission electron microscopy. The study reveals that the lateral growth rate increases and axial growth rate decreases with increasing Te doping level. The changes in the NW morphology can be reverted to some extent by changing the growth temperature. At high doping levels, formation of twinning superlattice is observed alongside with the (111)-facetted sidewalls. Finally, the incorporation of Te is confirmed by Raman spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quenching of the SnSbTe Cycle in the rp Process

The nuclides {sup 104-108}Sn, {sup 106-110}Sb, {sup 108,109}Te, and {sup 111}I at the expected endpoint of the astrophysical rp process have been produced in {sup 58}Ni+{sup nat}Ni fusion-evaporation reactions at IGISOL and their mass values were precisely measured with the JYFLTRAP Penning trap mass spectrometer. For {sup 106}Sb, {sup 108}Sb, and {sup 110}Sb these are the first direct experimental mass results obtained. The related one-proton separation energies have been derived and the value for {sup 106}Sb, S{sub p}=424(8) keV, shows that the branching into the closed SnSbTe cycle in the astrophysical rp process is weaker than expected.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Molecular beam epitaxial growth of Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} topological insulators on GaAs (111) substrates: a potential route to fabricate topological insulator p-n junction

High quality Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} topological insulators films were epitaxially grown on GaAs (111) substrate using solid source molecular beam epitaxy. Their growth and behavior on both vicinal and non-vicinal GaAs (111) substrates were investigated by reflection high-energy electron diffraction, atomic force microscopy, X-ray diffraction, and high resolution transmission electron microscopy. It is found that non-vicinal GaAs (111) substrate is better than a vicinal substrate to provide high quality Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} films. Hall and magnetoresistance measurements indicate that p type Sb{sub 2}Te{sub 3} and n type Bi{sub 2}Te{sub 3} topological insulator films can be directly grown on a GaAs (111) substrate, which may pave a way to fabricate topological insulator p-n junction on the same substrate, compatible with the fabrication process of present semiconductor optoelectronic devices.

36 MATERIALS SCIENCE↗

Recrystallization of an amorphized epitaxial phase-change alloy: A phoenix arising from the ashes

Epitaxial Ge{sub 2}Sb{sub 2}Te{sub 5} films grown on Si(111) by molecular beam epitaxy were reversibly switched between crystalline and amorphous states over a large area using femtosecond laser pulses. The structural and spatial homogeneity of the as-grown epitaxial and laser-switched areas on the sample were investigated by synchrotron nanofocus high resolution x-ray diffraction. The investigation clearly demonstrated that the single crystalline metastable cubic phase of Ge{sub 2}Sb{sub 2}Te{sub 5} is restored after switching. No polycrystalline features, not only on the average but even on the nanometer scale of the x-ray beam, were observed.

36 MATERIALS SCIENCE↗

Highly tunable electron transport in epitaxial topological insulator (Bi{sub 1-x}Sb{sub x}){sub 2}Te{sub 3} thin films

Atomically smooth, single crystalline (Bi{sub 1-x}Sb{sub x}){sub 2}Te{sub 3} films have been grown on SrTiO{sub 3}(111) substrates by molecular beam epitaxy. A full range of Sb-Bi compositions have been studied in order to obtain the lowest possible bulk conductivity. For the samples with optimized Sb compositions (x=0.5{+-}0.1), the carrier type can be tuned from n-type to p-type across the whole thickness with the help of a back-gate. Linear magnetoresistance has been observed at gate voltages close to the maximum in the longitudinal resistance of a (Bi{sub 0.5}Sb{sub 0.5}){sub 2}Te{sub 3} sample. These highly tunable (Bi{sub 1-x}Sb{sub x}){sub 2}Te{sub 3} thin films provide an excellent platform to explore the intrinsic transport properties of the three-dimensional topological insulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of PbTe p-Type Doping With BaF{sub 2}

We investigate here the electrical and structural properties of PbTe layers doped with BaF{sub 2}. The layers were grown on (111)BaF{sub 2} substrates by molecular beam epitaxy. The nominal doping level, defined as the beam flux ratio between BaF{sub 2} and PbTe, was varied from 0.02 to 1%. The hole concentration increases monotonously from 5x10{sup 17} to 1x10{sup 19} cm{sup -3} as the doping level is raised from 0.02 to 0.4%, and saturates at p approx10{sup 19} cm{sup -3} for higher doping levels. This result demonstrates that PbTe can be effectively p-type doped with BaF{sub 2}. Even for the highest doping levels, the PbTe layers remained with a good structural quality, as evidenced by the (222) x-ray rocking curves.

36 MATERIALS SCIENCE↗

Deposition of thin Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} films by pulsed laser ablation

Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} films were obtained by pulsed laser ablation. The films were deposited in vacuum (1 x 10{sup -5} Torr) on single crystal substrates of Al{sub 2}O{sub 3} (0001), BaF{sub 2} (111), and fresh cleavages of KCl or NaCl (001) heated to 453-523 K. The films were 10-1500 nm thick. The structures of the bulk material of targets and films were studied by X-ray diffractometry and transmission high-energy electron diffraction, respectively. Electrical properties of the films were measured in the temperature range of 77-300 K. It is shown that the films possess semiconductor properties. Several activation portions are observed in the temperature dependences of resistivity; the energies of activation portions depend on the film thickness and crystallite size.

36 MATERIALS SCIENCE↗

Structural and Magnetic Characterization of EuTe/SnTe Superlattices Grown by Molecular Beam Epitaxy

Here we investigate the structural and magnetic properties of 24 repetitions EuTe/SnTe superlattices (SLs), with 3 monolayers (ML) EuTe films and SnTe thicknesses between 13 and 36 ML. The SLs were grown by molecular beam epitaxy on 3 {mu}m SnTe buffer layers, grown on top of (111)BaF{sub 2} substrates. High resolution x-ray diffraction measurements indicated that the SLs with thicker SnTe layers have higher structural quality. This is due to the SnTe growth mode on EuTe, which starts in islands and evolves to layer-by-layer. The magnetic diffraction peak observed for the higher quality SLs proved the existence of antiferromagnetic order within the individual EuTe layers. Decreasing the width of the non-magnetic SnTe layers resulted in rougher interfaces, and the fading of the magnetic peak signal. The magnetization versus applied field curves indicated that the magnetic moments of SLs with thinner SnTe layers were also harder to align along the field direction. We interpret our results considering the loss of Eu neighbors, related with the increasing roughness of the SL interfaces.

36 MATERIALS SCIENCE↗

Ion-beam-induced damage formation in CdTe

Damage formation in <111>- and <112>-oriented CdTe single crystals irradiated at room temperature and 15 K with 270 keV Ar or 730 keV Sb ions was investigated in situ using Rutherford backscattering spectroscopy (RBS) in channeling configuration. Defect profiles were calculated from the RBS spectra using the computer code DICADA and additional energy-dependent RBS measurements were performed to identify the type of defects. At both temperatures no formation of a buried amorphous layer was detected even after prolonged irradiation with several 10{sup 16} ions/cm{sup 2}. The fact that CdTe is not rendered amorphous even at 15 K suggests that the high resistance to amorphization is caused by the high ionicity of CdTe rather than thermal effects. The calculated defect profiles show the formation of a broad defect distribution that extends much deeper into the crystal than the projected range of the implanted ions at both temperatures. The post-range defects in CdTe thus do not seem to be of thermal origin either, but are instead believed to result from migration driven by the electronic energy loss.

36 MATERIALS SCIENCE↗