Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface observations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Trends in Antarctic Surface Temperatures and Ice Extent from Satellite and Surface Observations

Surface air temperatures observed from stations around Antarctica have indicated predominantly positive trends which are as high as 0.4K per decade along the Antarctic Peninsula. Since the average air temperature during summer in the West Antarctic region is about -6 K, and since most of the stations are near coastal regions, it is important to know whether such trends are due to a local or large scale phenomenon. We analyzed about 19 years of infrared satellite data (1979-1997) to obtain a spatially detailed study of the variability of surface temperatures over the entire Antarctic region. We also analyzed potential impact of temperature changes over the sea ice cover using co-registered and nearly coincident microwave satellite data. The surface temperatures inferred from infrared data are shown to agree well with those observed from the limited number of Antarctic station data with a correlation coefficient of 0.98 and a standard deviation of less than 3K. The 19-year temperature data set shows positive trends of 0.12, 0.68, and 0.41 C per decade in ocean, sea ice and ice sheet surfaces, respectively. The sensitivity of the trend to record length was studied, using long term station data sets, and the results show that the trends start to stabilize at around 2 decades which is about the record length of satellite data. However, interannual fluctuations of the temperatures are large, especially in the ice sheets, and the 95% confidence level for the trends ranges from 0.12 to 1.22 for sea ice and from -0.74 to 1.55 C per decade for the ice sheet. In the sea ice regions, the position of the ice edge in winter with respect to the northernmost position of sea ice during the study period is also shown to be influenced by alternating warm and cold anomalies around the continent. This pattern is similar to that suggested by the presence of the Antarctic Circumpolar Wave (ACW) but the wavenumber appears to be predominantly mode 3 (instead of reported mode 2) for the Antarctic region. Unexpectedly, trends in the sea ice extent are found to be positive in most Antarctic sectors during the same period with the exception of the Bellingshausen and Amundsen Seas region.

Comisc, J. C.↗
NASA NTRS1999

ISCCP Cloud Properties Associated with Standard Cloud Types Identified in Individual Surface Observations

Individual surface weather observations from land stations and ships are compared with individual cloud retrievals of the International Satellite Cloud Climatology Project (ISCCP), Stage C1, for an 8-year period (1983-1991) to relate cloud optical thicknesses and cloud-top pressures obtained from satellite data to the standard cloud types reported in visual observations from the surface. Each surface report is matched to the corresponding ISCCP-C1 report for the time of observation for the 280x280-km grid-box containing that observation. Classes of the surface reports are identified in which a particular cloud type was reported present, either alone or in combination with other clouds. For each class, cloud amounts from both surface and C1 data, base heights from surface data, and the frequency-distributions of cloud-top pressure (p(sub c) and optical thickness (tau) from C1 data are averaged over 15-degree latitude zones, for land and ocean separately, for 3-month seasons. The frequency distribution of p(sub c) and tau is plotted for each of the surface-defined cloud types occurring both alone and with other clouds. The average cloud-top pressures within a grid-box do not always correspond well with values expected for a reported cloud type, particularly for the higher clouds Ci, Ac, and Cb. In many cases this is because the satellites also detect clouds within the grid-box that are outside the field of view of the surface observer. The highest average cloud tops are found for the most extensive cloud type, Ns, averaging 7 km globally and reaching 9 km in the ITCZ. Ns also has the greatest average retrieved optical thickness, tau approximately equal 20. Cumulonimbus clouds may actually attain far greater heights and depths, but do not fill the grid-box. The tau-p(sub c) distributions show features that distinguish the high, middle, and low clouds reported by the surface observers. However, the distribution patterns for the individual low cloud types (Cu, Sc, St) occurring alone overlap to such an extent that it is not possible to distinguish these cloud types from each other on the basis of tau-p(sub c) values alone. Other cloud types whose tau-p(sub c) distributions are indistinguishable are Cb, Ns, and thick As. However, the tau-p(sub c) distribution patterns for the different low cloud types are nevertheless distinguishable when all occurrences of a low cloud type are included, indicating that the different low types differ in their probabilities of co-occurrence with middle and high clouds.

Hahn, Carole J.↗
NASA NTRS1988

Automation of surface observations program

At present, surface weather observing methods are still largely manual and labor intensive. Through the nationwide implementation of Automated Surface Observing Systems (ASOS), this situation can be improved. Two ASOS capability levels are planned. The first is a basic-level system which will automatically observe the weather parameters essential for aviation operations and will operate either with or without supplemental contributions by an observer. The second is a more fully automated, stand-alone system which will observe and report the full range of weather parameters and will operate primarily in the unattended mode. Approximately 250 systems are planned by the end of the decade. When deployed, these systems will generate the standard hourly and special long-line transmitted weather observations, as well as provide continuous weather information direct to airport users. Specific ASOS configurations will vary depending upon whether the operation is unattended, minimally attended, or fully attended. The major functions of ASOS are data collection, data processing, product distribution, and system control. The program phases of development, demonstration, production system acquisition, and operational implementation are described.

Short, Steve E.↗
NASA NTRS2006

Constraining Numerical Geodynamo Modeling with Surface Observations

Numerical dynamo solutions have traditionally been generated entirely by a set of self-consistent differential equations that govern the spatial-temporal variation of the magnetic field, velocity field and other fields related to dynamo processes. In particular, those solutions are obtained with parameters very different from those appropriate for the Earth s core. Geophysical application of the numerical results therefore depends on correct understanding of the differences (errors) between the model outputs and the true states (truth) in the outer core. Part of the truth can be observed at the surface in the form of poloidal magnetic field. To understand these differences, or errors, we generate new initial model state (analysis) by assimilating sequentially the model outputs with the surface geomagnetic observations using an optimal interpolation scheme. The time evolution of the core state is then controlled by our MoSST core dynamics model. The final outputs (forecasts) are then compared with the surface observations as a means to test the success of the assimilation. We use the surface geomagnetic data back to year 1900 for our studies, with 5-year forecast and 20-year analysis periods. We intend to use the result; to understand time variation of the errors with the assimilation sequences, and the impact of the assimilation on other unobservable quantities, such as the toroidal field and the fluid velocity in the core.

Kuang, Weijia↗
NASA NTRS1979

Surface observations for the evaluation of geophysical measurements from Seasat

The surface observations used for direct comparison with Seasat-derived values at fixed locations and as input to analyzed fields of pressure, wind, air and sea temperatures, and surface dew point are discussed. These included measurements made by research vessels participating in the Gulf of Alaska Seasat Experiment (GOASEX) and NOAA research platforms in addition to aircraft observations and reports from the World Weather Watch. The application of these observations in describing the synoptic-scale winds over the ocean is discussed, and the sensitivity of the verification statistics to the type of data (observations from buoys, weather ships, and transient vessels with or without anemometers) is considered. Results of a preliminary comparison of wind fields derived from Seasat-A scatterometer observation with winds specified by several types of platforms are presented.

Wilkerson, J. C.↗
NASA NTRS1981

Evaluation of Nimbus 7 SMMR sensor with airborne radiometers and surface observations in the Norwegian Sea

Measurements made by the Nimbus 7 SMMR are compared with near simultaneous observations using the airborne SMMR simulator and with surface observations. The area of the test is in the Norwegian Sea between Bear Island and Northern Norway. It is noted that during the observation period two low-pressure systems were located in the test area, giving a spatial wind variation from 3-20 m/s. It is shown that the use of the currently available brightness temperatures and algorithms for SMMR does not give universally satisfactory results for SST and wind speed under extreme weather conditions. In addition, the SMMR simulator results are seen as indicating the need for more work on calibration.

Gloersen, P.↗
NASA NTRS1980

Material properties for mantle convection consistent with observed surface fields

An attempt is made to derive constraints on mantle convection from observed surface fields: plate velocities, gravity, topography and heat flow. The spherical harmonic spectra of the fields are expressed in terms of a spectral magnitude and slope, and requirements for the minimal representation of the equations for mantle convection are discussed. The effects of the boundary layer represented by the surface fields on convection at the mantle surface and at deeper levels are then examined, and a mean value of the effective mantle viscosity of approximately 10 to the 23rd g/cm per sec is obtained, together with values of 10 to the 8th and 10 to the 7th for the Rayleigh numbers of whole mantle and upper mantle convection, respectively. Consideration is then given to the compositional, thermal and rheological aspects of mantle convection, and it is pointed out that constraints on the depth and other properties of convection will require more detailed modeling using the relationships between the harmonic coefficients of the surface fields.

Kaula, W. M.↗
NASA NTRS1982

Near surface observations

Learning objectives include: (1) developing an understanding of the implications of the term "near surface observations"; (2) associating the appearance of large ground features as seen in satellite imagery with their appearance as seen from the ground; (3) grasping criteria and procedures for selecting training sites on the ground for use in supervised classification; (4) running through an example of training site selection; (5) becoming familiar with several methods of accuracy assessment; (6) becoming aware of the approach and value of making supporting measurements of the spectral and physical properties of materials on the ground and from aircraft; (7) taking note of the different types of instruments used in making specific ground measurements; and (8) appreciating the rationale underlying laboratory and field studies on or near the Earth's surface for the purpose of developing new sensor systems.

Source record↗
NASA NTRS2011

Asian Dust Weather Categorization with Satellite and Surface Observations

This study categorizes various dust weather types by means of satellite remote sensing over central Asia. Airborne dust particles can be identified by satellite remote sensing because of the different optical properties exhibited by coarse and fine particles (i.e. varying particle sizes). If a correlation can be established between the retrieved aerosol optical properties and surface visibility, the intensity of dust weather can be more effectively and consistently discerned using satellite rather than surface observations. In this article, datasets consisting of collocated products from Moderate Resolution Imaging Spectroradiometer Aqua and surface measurements are analysed. The results indicate an exponential relationship between the surface visibility and the satellite-retrieved aerosol optical depth, which is subsequently used to categorize the dust weather. The satellite-derived spatial frequency distributions in the dust weather types are consistent with China s weather station reports during 2003, indicating that dust weather classification using satellite data is highly feasible. Although the period during the springtime from 2004 to 2007 may be not sufficient for statistical significance, our results reveal an increasing tendency in both intensity and frequency of dust weather over central Asia during this time period.

Lin, Tang-Huang↗
NASA NTRS1995

ATLAS-3 correlative measurement opportunities with UARS and surface observations

The third ATmospheric Laboratory for Applications and Science (ATLAS-3) mission was flown aboard the Space Shuttle launched on November 3, 1994. The mission length was approximately 10 days and 22 hours. The ATLAS-3 Earth-viewing instruments provided a large number of measurements which were nearly coincident with observations from experiments on the Upper Atmosphere Research Satellite (UARS). Based on ATLAS-3 instrument operating schedules, simulations were performed to determine when and where correlative measurements occurred between ATLAS and UARS instruments, and between ATLAS and surface observations. Results of these orbital and instrument simulations provide valuable information for scientists to compare measurements between various instruments on the two satellites and at selected surface sites.

Harrison, Edwin F.↗
NASA NTRS2004

Changes in Seasonal Cloud Cover over the Arctic Seas from Satellite and Surface Observations

Winter and spring changes in cloudiness are compared over the arctic seas (ocean areas north of 60 degrees N) from the TOVS (TIROS Operational Vertical Sounder) Polar Pathfinder retrievals and two separate datasets derived from the Advanced Very High Resolution Radiometer (AVHRR). All satellite products exhibit significant decreases in cloud fraction over the arctic seas during winter (December, January, February) on the order of 5 %/ decade. An equally striking increase in spring (March, April, May) cloudiness is evident from the TOVS Pathfinder (TPP) and the extended AVHRR Polar Pathfinder (APP-x) projects. In the Central Arctic these positive trends can be as large as 15 %/decade. Surface observations from the Russian drifting meteorological stations are consistent with satellite-observed changes during the 1980s. Negative trends in spring cloudiness reported by Comiso [2003] are in conflict with these findings. Spring changes in cloudiness are associated with changes in the atmospheric circulation. These dramatic, large-scale changes may have substantial impacts on the surface energy balance.

Schweiger, Axel J.↗
NASA NTRS2002

Comparison of ScaRaB, GOES 8, Aircraft, and Surface Observations of the Absorption of Solar Radiation by Clouds

Data obtained by the Scanner for Radiation Budget (ScaRaB) instrument on the Meteor 3 satellite have been analyzed and compared to satellite (GOES 8), aircraft (Radiation Measurement System, RAMS), and surface (Baseline Solar Radiation Network (BSRN), Solar and Infrared Observations System (SIROS), and RAMS) measurements of irradiance obtained during the Atmospheric Radiation Measurements Enhanced Shortwave Experiment (ARESE). It is found that the ScaRaB data covering the period from March 1994 to February 1995 (the instrument's operational lifetime) indicate excess absorption of solar radiation by the cloudy atmosphere in agreement with previous aircraft, surface, and GOES 8 results. The full ScaRaB data set combined with BSRN and SIROS surface observations gives an average all-sky absorptance of 0.28. The GOES 8 data set combined with RAMS surface observations gives an average all-sky absorptance of 0.26. The aircraft data set (RAMS) gives a mean all-sky absorptance of 0.24 (for the column between 0.5 and 13 km).

Pope, Shelly K.↗
NASA NTRS1990

Intercomparisons of GOES-derived cloud parameters and surface observations over San Nicolas Island

The spatial sampling limitations of surface measurement systems necessitate the use of satellite data for the investigation of large-scale cloud processes. Understanding the information contained in the satellite-observed radiances, however, requires a connection between the remotely sensed cloud properties and those more directly observed within the troposphere. Surface measurements taken during the First ISCCP Regional Experiment (FIRE) Marine Stratocumulus Intensive Field Observations (IFO) are compared here to cloud properties determined from Geostationary Operational Environmental Satellite (GOES) data in order to determine how well the island measurements represent larger areas and to verify some of the satellite-measured parameters.

Minnis, Patrick↗
NASA NTRS1984

Mechanics of a strong subsynoptic gravity wave deduced from satellite and surface observations

The three-dimensional structure and dynamics of a strong, tropospheric gravity wave event continuously observed from both satellite and surface facilities reveal the subsynoptic character of this 'wave of depression', suggesting that the gravity wave originated in the upper troposphere near a jet streak, and, being quasi-hydrostatic, was relatively nondispersive and long lived. Theory is applied in order both to explain and estimate gravity wave properties throughout the troposphere. Further improvements in the descriptions presented may require the development of solitary wave theory for deep depression waves in shear flow.

Pecnick, M. J.↗
NASA NTRS1978

A scheme for computing surface layer turbulent fluxes from mean flow surface observations

A physical model and computational scheme are developed for generating turbulent surface stress, sensible heat flux and humidity flux from mean velocity, temperature and humidity at some fixed height in the atmospheric surface layer, where conditions at this reference level are presumed known from observations or the evolving state of a numerical atmospheric circulation model. The method is based on coupling the Monin-Obukov surface layer similarity profiles which include buoyant stability effects on mean velocity, temperature and humidity to a force-restore formulation for the evolution of surface soil temperature to yield the local values of shear stress, heat flux and surface temperature. A self-contained formulation is presented including parameterizations for solar and infrared radiant fluxes at the surface. Additional parameters needed to implement the scheme are the thermal heat capacity of the soil per unit surface area, surface aerodynamic roughness, latitude, solar declination, surface albedo, surface emissivity and atmospheric transmissivity to solar radiation.

Hoffert, M. I.↗
NASA NTRS1982

Utilization of satellite and surface observations in a gravity wave study

The possibility of detecting gravity waves in the upper troposphere by means of satellite imagery is examined. Attention is focused on the gravity wave event of March 27, 1975, for which the surface wave is analyzed by a pressure perturbation analysis based on barograph traces and a surface wind divergence analysis. IR observations were also made of the event with instrumentation on board the synchronous meteorological satellite (SMS-1). Strong wind gusts were reported at surface stations immediately following severe drops in the surface pressures, events which were found not to be connected with convective activity. The wave was concluded to extend throughout the troposphere with an axis tilted with height, indicating the wave was generated from an upper level energy source. It is suggested that the gravity wave was an adjustment to ageostrophic motions within the jet stream entering the Midwest. The finding is in concert with previous observations of jet streaks upstream from surface gravity waves.

Pecnick, M. J.↗