Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface charging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Tracking surface charge dynamics on single nanoparticles

Surface charges play a fundamental role in physics and chemistry, in particular in shaping the catalytic properties of nanomaterials. However, tracking nanoscale surface charge dynamics remains challenging due to the involved length and time scales. Here, we demonstrate time-resolved access to the nanoscale charge dynamics on dielectric nanoparticles using reaction nanoscopy. We present a four-dimensional visualization of the spatiotemporal evolution of the charge density on individual SiO 2 nanoparticles under strong-field irradiation with femtosecond-nanometer resolution. The initially localized surface charges exhibit a biexponential redistribution over time. Our findings reveal the influence of surface charges on surface molecular bonding through quantum dynamical simulations. We performed semi-classical simulations to uncover the roles of diffusion and charge loss in the surface charge redistribution process. Understanding nanoscale surface charge dynamics and its influence on chemical bonding on a single-nanoparticle level unlocks an increased ability to address global needs in renewable energy and advanced health care.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Surface Charge in Electrical Double Layer as a Kinetic Descriptor of Electrocatalytic Reactions

The successful commercialization of electrochemical energy-conversion systems hinges on a deeper understanding of electrocatalytic reaction kinetics. Despite extensive research, a key descriptor that characterizes electrolyte effects on reaction kinetics remains elusive. Here, surface charge in electrical double layers (EDLs) is introduced as a descriptor for electrolyte-dependent kinetics. The surface charge is calculated with a continuum EDL model parameterized by density-functional theory. The model is validated by reproducing the anomalously low slope of Pt(111) in Parsons-Zobel plots. Strong correlations are observed between calculated surface charge and experimental kinetic currents for hydrogen evolution, oxygen reduction, and CO 2 -reduction reactions across various pH levels and cationic species. These correlations can be either promotional or inhibitory, depending on solute-intermediate interactions. In acidic media, incorporating adsorbate charge captures specific adsorption effects in oxygen reduction reaction. In conclusion, these findings establish surface charge density as a key descriptor for electrolyte-dependent kinetics, which will guide the design of the electrode/electrolyte interface.

Adsorption↗
DOE OSTI2024

Mechanically activated and deactivated ion transport across nanopores with heterogeneous surface charge distributions

To mimic the intricate and adaptive functionalities of biological ion channels, electrohydrodynamic ion transport has been studied extensively, albeit mostly, across uniformly charged nanochannels. Here, we analyze the ion transport under coupled electric field and pressure across heterogeneously charged nanopores with oppositely charged sections on their lateral surface. We only consider such pores with symmetric hourglass-like and cylindrical shapes to focus on the effects of the non-uniform surface charge distribution. Finite-element simulations of a continuum model demonstrate that a pressure applied in either direction of the pore-axis equally suppresses or amplifies the ionic conductance, depending on the electric field polarity, by distorting the quasi-static distribution of ions in the pore. The resulting anomalous mechanical deactivation and activation of ionic current under opposite voltage biases exhibit the functional modularity of our setup, while their intensities are highly tunable, substantially greater than those of analogous behaviors in other nanochannels, and fundamentally correlated to ionic current rectification (ICR) in our pores. A detailed study of ICR subsequently reveals its counterintuitive non-monotonous variations, in the pores, with the magnitude of applied voltage and the pore length, that can help optimize their diode-like behavior. We further illustrate that while the hourglass-shaped nanopores yield the more efficient mechanical suppressors of ion transport, their cylindrical analogs are the superior rectifiers and mechanical amplifiers of ion conduction. Therefore, this article provides a blueprint for the strategic design of nanofluidic circuits to attain a robust, modular, and tunable control of ion transport under external electrical and mechanical stimuli.

Physics↗
DOE OSTI2024

Surface Wettability Analysis from Adsorption Energy and Surface Electrical Charge

Surface wettability is determined by the attraction of a liquid phase to a solid surface. It is typically quantified by using contact angle measurements at mineral surfaces in the case of the flotation of mineral particles. Contact angle research to describe wettability has been investigated at different scales by sessile drop measurements, molecular dynamic simulation, and atomic force microscopy. In this study, the density functional theory (DFT) was employed for predicting the surface free energy and contact angles of a well-known hydrophobic phyllosilicate mineral talc and a well-known hydrophilic phyllosilicate mineral muscovite based on the calculated interfacial energy and surface charge. The results revealed that the predicted contact angle at the atomic scale was larger than the experimental value, and identified two interactions: electrostatic interaction and hydrogen bonding, between the hydrophilic muscovite surface and the water layer, while a water-exclusion zone of 3.346 Å was found between the hydrophobic talc surface and the first water layer. This investigation gives a new perspective for wettability determination at the atomic scale.

Geochemistry & Geophysics↗
DOE OSTI2026

Surface Charge Predicts the Presence of Cation Effects in Electrocatalysis

The identity of electrolyte cations has an important influence on the rates of many electrocatalytic reactions, but these effects are not always observed. Recently, we found that the surface charge of the catalyst, quantified by the potential of zero total charge (PZTC), is a useful heuristic for predicting when cation effects will be observed for the oxygen reduction reaction (ORR). Here, we demonstrate that this descriptor allows us to rationalize the observation or absence of cation effects across a range of conditions, reactions (the hydrogen evolution reaction, the ORR, methanol oxidation, ethylene glycol oxidation, glycerol oxidation, and glucose reduction) and metal surfaces (Pt, Pd, Ag, and Au). These results suggest that when the reaction’s operating potential is negative of the metal’s PZTC, electrolyte cations accumulate at the catalyst surface and influence reaction rates. As a result, when reactions occur positive of the PZTC, cation effects are not observed.

Cations↗
DOE OSTI2025

Engineering surface charges of nanofiltration membranes to maximize Li + /Mg 2+ separation properties

Polyamide-based nanofiltration (NF) membranes are attractive for Li + /Mg 2+ separation for lithium recovery from salt brine (containing mainly Mg 2+ ). However, Li + and Mg 2+ have similar hydration radii, resulting in a low separation factor (SF Li/Mg ). Herein, we demonstrate that SF Li/Mg can be significantly enhanced by optimizing the membrane surface positive charges. This results in an unexpected maximum SF Li/Mg at a solution pH slightly below its isoelectric point (IEP). Specifically, NF270 membrane was surface-grafted with 2-(methacryloyloxy)ethyltrimethylammonium chloride (META) or polyethylenimine (PEI) using bio-adhesive dopamine, forming a thin, stable, charged layer (20–40 nm) on the surface. The effects of solution pH and surface modification on the surface zeta potential (ZP) and single- and mixed-salt Li + /Mg 2+ separation properties are thoroughly investigated. For example, the META grafting increases the ZP from 9.2 to 16 mV and SF Li/Mg by 130 % from 35 to 80 at pH 4, superior to the state-of-the-art commercial NF membranes. Furthermore, this surface modification occurs at ≈22 °C in aqueous solutions and can be utilized to enhance commercial modules for practical applications.

Li+/Mg2+ separation↗
DOE OSTI2024

Spacecraft surface charging as a function of material properties

Spacecraft material behavior plays a very important role in space missions. Spacecraft immersed in plasma get charged by absorbing plasma particles and by emitting electrons from spacecraft surfaces via photoelectron and secondary electron emission. Spacecraft charging depends heavily on material properties such as work function, secondary electron yield, dielectric constant, and electric conductivity among other. Material properties are typically assumed to be static in charging models. However, it is well known that this is not the case in space. This makes spacecraft charging predictions very challenging. Material properties are well characterized before the spacecraft is put in orbit through characterization in the lab under clean conditions. However, once in space, material properties change due to the harsh and very dynamic space environment. We present a new capability to predict material behavior in space from first-principles modeling. The ongoing effort seeks to couple material models, density functional theory (DFT) and molecular dynamic (MD) codes, with environment models, plasma kinetic codes. This preliminary study will show results of surface charging as a function of material work function, dielectric constant, and conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electric Field’s Dueling Effects through Dehydration and Ion Separation in Driving NaCl Nucleation at Charged Nanoconfined Interfaces

Investigating nucleation in charged nanoconfined environments under electric fields is crucial for many scientific and engineering applications. Here we study the nucleation of NaCl from aqueous solution near charged surfaces using machine-learning-augmented enhanced sampling molecular dynamics simulations. Our simulations successfully drive phase transitions between the liquid and solid phases of NaCl. The solid phase is stabilized under electric fields, particularly at an intermediate surface charge density. We examine which physical characteristics drive the nucleation of NaCl from aqueous solutions and find that the removal of solvent water from Cl– at the solid precursor surface plays a more critical role than the accumulation of ions. Our simulations reveal the competing effects of electric fields on nucleation processes: they facilitate the removal of water, promoting nucleation, but also promote the separation of ion pairs, thereby hindering nucleation. Here, this work provides a framework for studying nucleation processes in nanoconfined environments under electric fields and provides physical insights for the design of electrochemistry materials.

Electric fields↗
DOE OSTI2025

Humidity-Dependent Electrostatic Charge Decay on Dielectric Surface in Enclosed Volumes

Electrostatic surface charge decay is investigated to determine loss mechanisms, the effect of humidity, enclosure size, and material. This work focuses on charging dielectric and metal surfaces close to the electrical breakdown threshold in atmospheric air under humid and dry conditions. After initial charging to a maximum potential of roughly 30 kV, the associated surface charge is allowed to decay because of recombining with ions from the natural background, resulting in decay times ranging from minutes to hours to days. Spheres with a radius of 50 mm consisting of varying materials (PTFE and metal as referenced later) are charged and tested at relative humidity levels, RH, of 10%, 35%, and 64%. It was found that the ion-ion pair production rate and the enclosure size affected the measured charge decay rate. The impact of air convection on charge decay in the open air (no enclosure) is discussed. The humidity increased the rate of charge decay on the metal and dielectric spheres. For example, in the first 25 minutes after charging, the total charge on the PTFE sphere decreased to 66%or 50% from its initial value in the 10% and 35% RH tests, respectively. An equivalent generation rate is found for the ions in the enclosure, with 10 and 24 ion pairs cm −3 s −1 being generated at a 5% and 49% relative humidity, respectively.

42 ENGINEERING↗
DOE OSTI2026

Effects of oxide surface chemistry on diffusioosmosis

Diffusioosmosis is the movement of fluid induced by gradients in solute concentration. Recent studies suggest that in low permeability rocks, it may be the dominant mode of reactant transport and thus control rates of diagenesis, which cannot be adequately explained by pressure-driven flow alone. In this paper we investigate how the equilibrium between an oxide mineral and the surrounding fluid phase influences the diffusioosmotic velocity. We have developed a theory for the case of a thin double layer, where the Debye length is smaller than the characteristic pore size. Several factors contribute to the total fluid velocity: the chemical structure of the mineral surface, the electrolyte type and concentration gradient, and the solution pH. Individual factors can act in concert or in opposition, leading to widely varying magnitudes and directions of the velocity. The numerical results are within the range of the limited experimental data. Our results highlight how surface charging and surface complexation impact the flow, and how they depend on pH.

Diagenesis↗
DOE OSTI2025

Distribution of nickel(II) ions adsorbed at the muscovite mica (001)-water interface determined by in-situ resonant anomalous X-ray reflectivity

Mineral-water interfaces mediate adsorption, ion exchange, and secondary mineral formation that control element mobility in natural and engineered systems. Reliable prediction and control of these processes require a fundamental understanding of the interfacial structure that links adsorbed ion speciation to macroscopic sorption capacity and strength. Here, we determine atomic-scale changes in hydration and distribution of Ni(II) at the muscovite mica (001)-water interface using in situ high-resolution X-ray reflectivity (XR) and resonant anomalous X-ray reflectivity (RAXR) at 1 mM NiCl2 and pH 5.7. XR reveals reorganization of the primary hydration structure relative to that in deionized water: the water layer adsorbed in the cavity sites at a height of ~1.3 Å disappears, while distinct solution layers emerge at ~2.3, ~4.1, and ~5.6 Å above the basal oxygen plane. RAXR resolves three interfacial Ni(II) species: a dominant outer-sphere complex at 3.65 Å (~80% of the total coverage), a minor inner-sphere complex at 0.75 Å, and a low-coverage, more distant outer-sphere species at 5.63 Å. These three adsorbed Ni(II) species account for a total Ni(II) coverage of 0.54 ± 0.02 ion per unit cell area that compensates for the surface charge. These results highlight the role of interfacial hydration in controlling the speciation and stability of adsorbate cations on the negatively charged mica surface, providing quantitative insight into predicting the geochemical behavior of divalent metal cations in the aqueous environments.

Lee, Sang Soo↗
DOE OSTI2025

Mesoscale fractal whey protein particles derived from microscale linear-shaped protein assemblies (Part 1): Manufacturing method and particle characteristics

Whey protein isolates (WPI) are widely used in processed foods for their versatile functional properties. Modifying the structural properties of proteins by assembling them into mesoscale or microscale particles may improve their functionality and broaden their applications. This study aims to manufacture and characterize mesoscale whey protein particles (WPP) derived from WPI. Two types of WPP, WPP1 (0.05 mL/min) and WPP2 (0.25 mL/min), were prepared through a multistep approach involving liquid antisolvent (LAS) precipitation, heat treatment, and microfluidization. Liquid antisolvent precipitation was performed by injecting a 20% (wt/vol) WPI dispersion (pH 7) into an ethanol-glycerol mixture (75:25, vol/vol) under laminar flow, followed by heat treatment at 80°C for 20 min as a particle hardening step. This process produced stable fiber- and ribbon-shaped whey protein assemblies (WPA), which served as precursors to WPP. Subsequent microfluidization (150 MPa, 6 passages) reduced the size of WPA, yielding mesoscale WPP with irregular morphologies and a more uniform size distribution, as revealed by microscopy and dynamic light scattering. ζ-Potential and fluorescence labeling indicated higher surface charge and surface hydrophobicity of WPP compared with untreated WPI. The WPP showed internal mass fractal and surface fractal structures at larger length scales, analyzed using small-angle X-ray scattering. Fourier transform infrared spectroscopy demonstrated an increased fraction of intermolecular β-sheets in WPP, suggesting that hydrogen bonding contributed to their formation. Gel electrophoresis confirmed that disulfide bonds served as the primary cross-links stabilizing the WPP structure. Furthermore, turbidity measurements showed that WPP exhibited superior colloidal phase stability compared with untreated WPI and maintained high colloidal stability under both acidic and neutral pH conditions.

Antisolvent precipitation↗
DOE OSTI2026

Electrostatically driven pattern formation in mixed charged–neutral multicomponent elastic membranes

Multicomponent crystalline and amorphous elastic shells exhibit heterogeneous surface patterns that provide distinctive functionalities in cellular environments. Such patterning typically arises from the competition between short-range attractive and long-range repulsive interactions in membranes. Here, we demonstrate that the intrinsic competition between electrostatic repulsion and elastic deformation is sufficient to drive spontaneous surface patterning in elastic shells, requiring no additional attractive interactions. Using numerical simulations, we demonstrate pattern formation in mechanically homogeneous membranes with heterogeneous surface charge composition across different topologies, including spheres, discs, and flat periodic membranes. We also examine patterns in crystalline and amorphous shells of coassembled charged and neutral components with different bending rigidities. At low charge fraction, discrete charged surface domains form. At intermediate charge fraction, the competition between electrostatics and elasticity leads to elongated domains (rods) of the charged component, which results in lamellar patterns at nearly equal fraction of the charged and neutral components. At high charge fraction, nanodomains of the neutral component form. Amorphous shells exhibit similar progressions but with disordered structures rather than ordered lamellar patterns. These pattern morphologies are observed in both the closed shells and flat membranes. As salt concentration increases, all patterns coarsen due to the screening of electrostatic interactions.

charge heterogeneity↗
DOE OSTI2026

Electrostatic Gating of Ionic Conductance through Heterogeneous van der Waals Nanopores

Nanofluidic ionic transistors typically require gate voltages above 1 V and operate only at submillimolar ionic strengths, limiting their biocompatible applications. We demonstrate ionic transistors consisting of single sub-10 nm nanopores drilled in van der Waals (vdW) heterostructures with internal gate electrodes made of few-layer graphene. These devices deliver up to 10-fold current modulation at gate voltages as low as 0.3 V in 10 mM KCl, and ∼2-fold modulation at near-physiological 100 mM KCl. Baseline conductance with no gate shows surface-charge-dominated transport below 100 mM KCl, consistent with negatively charged hBN walls and ∼5 nm opening of the pores. The surface charge and the electrochemical asymmetry introduced by the three-electrode configuration govern the device’s behavior: negative gate voltage (V G ) enriches ionic concentrations and enhances current, whereas positive V G induces a local depletion zone that suppresses transport. The current modulation by V G is dependent on the polarity of the transmembrane potential and leads to ion current rectification. Molecular dynamics simulations of a nanopore in a hBN–graphene–hBN stack reveal confinement and surface charge-dependent suppression of the relative permittivity of interfacial water. Continuum modeling with radially varying interfacial water permittivity reproduces the asymmetric I–V characteristics and explains how the embedded gate sculpts local potential and ion concentrations. By enabling sub-0.5 V control of ionic transport at up to 100 mM salt concentrations, these devices address a key need in nanofluidics to create low-power ionic circuits and biosensing.

Materials science↗
DOE OSTI2026

Rare earth ion transport and selectivity in large diameter nanotube porins

Selective separation of rare earth elements (REEs) in nanoporous media is very challenging due to the similar physicochemical properties of trivalent lanthanide ions. In this work, we systematically investigate the transport and selectivity of REE 3+ ions through two model nanofluidic channels: 1.5 nm diameter carbon nanotube porins (wCNTPs) and 2.1 nm diameter boron nitride nanotube porins (BNNTPs). Using a fluorescence-based vesicle assay, we find that while wCNTPs show almost no differential selectivity across the lanthanide series, a behavior consistent with bulk-dominant transport through their moderately-confined channels with chemically inert, hydrophobic walls. In contrast, BNNTPs exhibit nearly an order of magnitude higher permeability and significant differential selectivity, following a volcano-shaped trend with Eu 3+ ions showing the highest permeability. We attribute this enhanced performance to the high negative surface charge of BNNTPs, which facilitates a surface-dominated transport mechanism where ion migration within the electric double layer becomes the primary contributor to conductance. These results elucidate the distinct roles of surface charge in nanoscale confinement and provide critical design rules for the development of future membranes tailored for efficient REE separations.

Materials science↗
DOE OSTI2025

Nanomaterial-Engineered Surfaces for Decontamination of Water Resources

Aggregation-dependent shifts in plasmon frequency (colorimetric sensor); • Local refractive index-dependent shifts in plasmon frequency; • Inelastic (surface-enhanced Raman) light scattering; • Elastic (Rayleigh) light scattering CONCLUSIONS Generate unique classes of nanoscale materials for environmental stewardship applications o Characterization of nanomaterials provides understanding of structural properties for sorption of contaminants o Surface charge influences interaction between nanomaterial and contaminant o Surface charge can be modified to allow for more contaminant sorption • Demonstrate innovative nanomaterial science and technology solutions that meet our environmental stewardship needs: • Detect contaminants • Sequester contaminants

Murph, Simona E. [Savannah River National Laborato↗