Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SrY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A PIPS + SrI 2 (Eu) detector for atmospheric radioxenon monitoring

The PIPS–SrI 2 (Eu) is a prototype atmospheric radioxenon detection system designed at Oregon State University in support of international efforts towards monitoring clandestine nuclear weapon testing activities. This detector aims to address some shortcomings found in currently deployed beta–gamma atmospheric radioxenon detection systems, such as lackluster energy resolution and memory effect, by employing modern detection materials and readout. The system uses a PIPSBox, a silicon-based gas cell, for electron detection, and a pair of ultrabright, D-shaped SrI 2 (Eu) scintillators coupled to silicon photomultipliers for photon detection. A custom eight-channel digital pulse processor equipped with a field programmable gate-array (FPGA) identifies electron–photon coincidences between the volumes in near real-time. Gas samples of the four radioxenon isotopes of interest were independently measured with the PIPS–SrI 2 (Eu) detection system to determine energy resolution and efficiency. Application of FPGA-based coincidence discrimination in near real-time reduced the ambient background count rate by 95.85 ± 0.04%. Using parameters from the Xenon International gas processing unit and assuming a blank sample and zero memory effect the minimum detectable concentrations (MDCs) for the isotopes were calculated to be 0.12 ± 0.03, 0.27 ± 0.05, 0.15 ± 0.02, and 1.00 ± 0.08 mBq/m 3 air for 131m Xe, 133 Xe, 133m Xe, and 135 Xe, respectively. These MDC estimates compare well with other radioxenon detection systems employed in the International Monitoring System (IMS) and indicate that the PIPS–SrI 2 (Eu) is in compliance with the Comprehensive Nuclear Test-Ban-Treaty Organization (CTBTO) sensitivity requirement of ≤ 1 mBq/m 3 for 133 Xe.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

South Asia Group for Energy - Sri Lanka

Sri Lanka set a target of generating 70% of its electricity from renewable energy sources by 2030. This goal includes the addition of 5.8 GW of renewable power capacity, comprising hydropower, solar, wind, and biomass, between 2023 and 2030, with an interim target of adding 2.5 GW of renewable capacity by 2026. To accomplish this, Sri Lanka's power grid needs significant transformation and modernization to handle the integration of variable renewable energy sources effectively. The South Asia Group for Energy (SAGE) is helping Sri Lanka's grid operator, the Ceylon Electricity Board (CEB), understand the gaps for operating the grid with higher renewable share and identifying technology and research requirements to establish a variable renewable energy control center.

ENERGY PLANNING, POLICY, AND ECONOMY,POWER TRANSMI↗
DOE OSTI2020

Materials Data on SrY by Materials Project

SrY crystallizes in the hexagonal P-6m2 space group. The structure is three-dimensional. Sr is bonded to six equivalent Sr and six equivalent Y atoms to form SrSr6Y6 cuboctahedra that share corners with eighteen equivalent SrSr6Y6 cuboctahedra, edges with six equivalent SrSr6Y6 cuboctahedra, edges with twelve equivalent YSr6Y6 cuboctahedra, faces with eight equivalent SrSr6Y6 cuboctahedra, and faces with twelve equivalent YSr6Y6 cuboctahedra. All Sr–Sr bond lengths are 3.83 Å. All Sr–Y bond lengths are 3.88 Å. Y is bonded to six equivalent Sr and six equivalent Y atoms to form YSr6Y6 cuboctahedra that share corners with eighteen equivalent YSr6Y6 cuboctahedra, edges with six equivalent YSr6Y6 cuboctahedra, edges with twelve equivalent SrSr6Y6 cuboctahedra, faces with eight equivalent YSr6Y6 cuboctahedra, and faces with twelve equivalent SrSr6Y6 cuboctahedra. All Y–Y bond lengths are 3.83 Å.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Crystal growth and scintillation properties of new ytterbium-activated scintillators Cs 4 CaI 6 :Yb and Cs 4 SrI 6 :Yb

Yb 2+ was investigated as a potential alternative activator for Cs 4 SrI 6 and Cs 4 CaI 6 scintillators for the first time, as opposed to the previously studied Eu2+ activator. Single crystals with nominal Yb 2+ concentrations of 0.5 mol%, 1 mol%, and 3 mol% were grown in Ø7 mm ampoules using the vertical Bridgman method. Luminescence and scintillation properties were evaluated as a function of Yb 2+ concentration and host compound. Here, the 5d → 4f electronic transition of Yb 2+ was observed for both the Sr- and Ca-containing compositions. X-ray induced radioluminescence emission was centered between 449 nm and 463 nm depending on Yb 2+ concentration and host compound. Both the spin-allowed and spin-forbidden transitions were observed in photoluminescence emission spectra and were centered at 446 nm and 476 nm, respectively, for both compounds. The best scintillation performance was achieved with Cs 4 CaI 6 :Yb 1 mol%, which had a 3.5% energy resolution at 662 keV and 43,000 ph/MeV light yield. To our knowledge this is the best energy resolution ever reported for a Yb 2+ -doped scintillator. Additional Cs 4 CaI 6 :Yb 1% crystals were grown in Ø12 mm ampoules to investigate the size dependence of scintillation properties, as well as crystal homogeneity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Highly Efficient Regeneration Module for Carbon Capture Systems in NGCC Applications

The objective of this project is to design, fabricate, and test a highly efficient regeneration module capable of providing an ultra-lean absorption solution that is required for capturing CO 2 from dilute sources at 95% or better efficiency. By integrating this advanced regenerator module with SRI International’s Mixed Salt Process (MSP) absorption modules, SRI expects to demonstrate significant progress toward a reduction in cost of capture versus the DOE reference natural gas combined cycle (NGCC) plant with carbon capture. SRI designed, built, and tested an advanced stripper to enhance the performance of SRI’s MSP for CO 2 capture – a transformational ammonia-based solvent technology – for natural gas (NG) power sources. The testing of the advanced stripper for MSP was conducted at an SRI site using a simulated flue gas stream equivalent to about 10 kWe. The research work included modeling of the advanced stripper and integrating it with the MSP absorbers; studying the strategies for producing very highly alkaline lean solvent with minimized emissions; operating the stripper with advanced heat integration to improve process efficiencies; and collecting critically important data for a detailed techno-economic analysis (TEA). The project tasks were designed to address concerns relating to scale-up and integration of the technology to NG power plants—more specifically, to maximize the carbon capture efficiency achievable with MSP and identify pathways to achieve higher capture efficiencies and ultimately zero net carbon emissions. SRI teamed up with a process modeling company (OLI Systems), a process and chemical engineering company (Trimeric Corporation), and a cost-sharing commercial partner (Baker-Hughes – a leading multinational company that designs, manufactures, and services transformative energy technologies) to execute the project. The research findings will accelerate the MSP development and pave the way for the technology to reach the DOE’s goal, and ultimately commercialization of the MSP technology for low-cost CO 2 capture from NGCC flue gas and other dilute CO 2 sources.

03 NATURAL GAS↗
DOE OSTI2026

CoEx Electrode Structuring for High Energy and Fast Charging Lithium-Ion Batteries

This project was a collaboration between SRI International (SRI) and Oak Ridge National Laboratory (ORNL) focused on advancing SRI’s CoEx technology for printing of battery electrodes with structured porosity, specifically for improving fast charging performance. Prior work funded by the Vehicle Technologies Office (VTO) served as proof-of-concept for CoEx printing, with the scope limited to demonstrating that CoEx structuring in the cathode would improve discharge performance. In that work, a thick cathode was paired with an anode produced through conventional means (i.e. it had no structuring), and the baseline comparison was a cell with conventionally produced cathode and anode of similar loading, along with a lower loaded cell that was intended to represent cells of typical loading. The result of that work showed that the CoEx cells had higher energy density than the thin baseline cells, due to the thicker electrode layers, and had much higher power density than the thick baseline cells at higher discharge rates, because the CoEx cathode had higher performance than the conventional cathode. In this project, we proposed to extend the CoEx technology to structure both the anode and cathode of a lithium ion battery, resulting in at least a 20% increase in energy density under fast charging conditions, while reducing costs by 15% and cutting energy usage during production.

25 ENERGY STORAGE↗
DOE OSTI2026

Employing Machine Learning for New Particle Formation Identification and Mechanistic Analysis: Insights From a Six‐Year Observational Study in the Southern Great Plains

We present a supervised machine learning (ML) framework to automatically identify new particle formation (NPF) events and analyze key atmospheric factors associated with their occurrence and growth. We applied ML to detect NPF events using start time and particle concentrations across size ranges, while identifying atmospheric variables including ambient temperature, relative humidity, solar radiation intensity (SRI), wind speed, wind direction, boundary layer height, total organics, sulfate, nitrate, total surface area concentration, sulfur dioxide, and turbulent kinetic energy (TKE). We analyzed a 6-year data set from the Atmospheric Radiation Measurement at the Southern Great Plains (SGP) site in Oklahoma, USA. Using long-term ground-based measurements, we identified NPF events and applied Random Forest Classifiers, which achieved 90%–95% prediction accuracy. Feature importance analysis highlighted SRI, relative humidity, and ambient temperature as the most influential variables, contributing normalized importances of 28%, 17%, and 10%. Partial Dependence Plots (PDPs) indicated that higher SRI and lower relative humidity were critical in promoting NPF formation at SGP. Seasonally, NPF events were more frequent in winter (42.1%) and spring (35.5%), and least in summer (4.0%). Particle growth rates also exhibited a seasonal variation, with the lowest in winter (below 2 nm hr −1 ) and highest in late spring and early summer (exceeding 5 nm hr −1 ). Temperature, turbulent kinetic energy, and aerosol properties were the primary factors of growth rate variability. This study advances predictive modeling of NPF, offers insights for future campaign deployments, and demonstrates the effectiveness of ML in understanding the formation and growth of atmospheric aerosols.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Report of the Sixth Regional Review Meeting of the Radiological Security Partnership.

The Sri Lanka Atomic Energy Regulatory Commission (AERC) and the United States Department of Energy (U.S. DOE) co-hosted the 6th Regional Review Meeting on Radiological Security involving representatives from over 20 countries, the International Atomic Energy Agency (IAEA), the International Criminal Police Organization (INTERPOL), and the World Institute for Nuclear Security. The purpose of the event was to discuss the implementation of, and plans for, high-activity radioactive source security (RSS). The U.S. DOE’s National Nuclear Security Administration (NNSA) Office of Radiological Security (ORS) fully sponsored this review meeting. Participants were welcomed to Colombo, Sri Lanka, and the meeting was formally opened by Nirmali Karunarathna of the Sri Lanka Atomic Energy Regulator Council who emphasized the strong partnerships among the participants. The opening Ceremony and Lamp Lighting included dignitaries from the sponsoring countries. Robert Hilton, Deputy Chief of Mission at the U.S. Embassy in Colombo, and Kristin Hirsch of the ORS gave other opening remarks that highlighted the social benefit from radiological sources in medicine, industry, and agriculture, while stressing the importance of addressing the risks associated with the malicious use of radiological sources. Emphasis was placed on the importance of partnerships among all the participants to help ensure the success of securing radiological materials throughout the world and the opportunity to share information and experiences. AERC was acknowledged with special thanks for hosting this event. A participant list is included as Attachment A, and the meeting agenda is provided as Attachment B. All presentations were made available to participants. The following sections summarize the meeting’s presentations, discussions, issues, suggestions, and recommendations.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2022

Comparison of Infiltration Test Methods for Soil Health Assessment

Infiltration rate (IR) has been commonly used as a metric to evaluate soil quality and health. For the USDA Soil Quality Test Kit, a 15-cm (6-in) diameter (ID) cylinder is used to measure IR with 444 cm 3 (equivalent to 2.54 cm or 1 in) of water while other standard IR procedures require substantially larger volumes of water. The general objective of this study was to compare different methods for IR measurement. Using three replications, IR measurements were conducted along a 9-m (27-ft) long transect in two different soil types by the double-ring infiltrometer (DRI) using 25- and 50-cm (10-and 20-in, respectively) cylinders, single-ring infiltrometer (SRI) using 25- and 50-cm cylinders, Cornell sprinkle infiltrometer (CSI) using a 24.1-cm (9.5-in) cylinder, the USDA recommended procedure using a 15-cm diameter cylinder (hereafter referred to as USDA-15 method), and a modified USDA method using a 24.1-cm diameter cylinder. Although the USDA-15 method is simple and requires a small amount of water, based on high variability among replications and significant reduction in IR during early stages of water entry into the soil, the procedure does not offer an accurate estimate of the soil infiltration potential. The CSI procedure was reproducible, but it is more cumbersome to perform than other methods. The DRI, SRI, and CSI methods required a much greater volume of water than the USDA-15 method but produced results that are more consistent. The most consistent results were obtained by the CSI and DRI methods. The modified USDA method results were similar to the SRI method and were an improvement over the original USDA-15 method. For assessing soil health, additional investigations should be conducted to evaluate a modified version of the USDA procedure using a larger cylinder.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

CACTUS: CO 2 Aerogel Capture Towards Utilization and Sequestration

The CACTUS project aimed to develop a novel solid sorbent and sorption module prototype for direct air capture (DAC) of carbon dioxide, by a moisture-swing adsorption (MSA) mechanism. Because MSA uses changes in humidity, not temperature to switch the sorbent from capturing CO 2 to releasing concentrated CO 2 it is > 4X more energy-efficient than the thermal swing process. The goal was to develop a sorbent with a CO 2 capture capacity of 1 mmol CO 2 /g sorbent (or 0.75 mmol CO 2 /g structured sorbent), at a projected scaled cost of < $\$$15/kg sorbent and demonstration of a path to < $\$$100/ton CO 2 . At the end of the project, we achieved 0.8 mmol CO 2 /g sorbent powders, 0.37 mmol CO 2 /g structured sorbent (50% of target), at a projected cost of $\$$29/kg sorbent and an estimated cost of $\$$160/ton CO 2 . The key innovation was SRI’s patented polymer aerogel synthesis platform, which was adapted to produce a nanoporous aerogel with a high density of CO 2 -adsorbing quaternary ammonium groups. This research discovered a new ammonium polymer sorbent and identified a chemical path for its fabrication. The new process solved the monomer immiscibility challenge encountered with the initial method (ammonium is hydrophilic and the crosslinker is hydrophobic). The team fabricated structured sorbent sheets consisting of a non-woven porous substrate impregnated with ammonium polymer and demonstrated its operation in custom made breakthrough test setup MSA DAC built at SRI, and which operates similarly to the envisioned large-scale CO 2 capture plant, to provide data for techno-economic analysis (TEA). TEA sensitivity analysis indicated that ∼$\$$100/ton CO 2 can be achieved if the target capacity of 0.75 mmol CO 2 /g structured sorbent is met. Also identified routes to decrease sorbent manufacturing cost to ∼$\$$19/kg by reducing amounts and recycling the organic solvents. More work is needed on transitioning process manufacturing from powders (which showed a capacity of up to 0.8 mmol/g sorbent) to structured sheets which showed a capacity of 0.37 mmol CO 2 /g structured sorbent (or 0.44 mmol/g sorbent if one excludes the inert porous substrate). This is likely due to different micro/nano-structure of the sorbent and material processing constraints at the laboratory scale. Sorbent cycling studies (> 100 cycles) are needed to investigate its performance stability over time.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

Range-separated stochastic resolution of identity: Formulation and application to second-order Green’s function theory

We develop a range-separated stochastic resolution of identity (RS-SRI) approach for the four-index electron repulsion integrals, where the larger terms (above a predefined threshold) are treated using a deterministic RI and the remaining terms are treated using a SRI. The approach is implemented within a second-order Green’s function formalism with an improved O(N 3 ) scaling with the size of the basis set, N. Moreover, the RS approach greatly reduces the statistical error compared to the full stochastic version [T. Y. Takeshita et al., J. Chem. Phys. 151, 044114 (2019)], resulting in computational speedups of ground and excited state energies of nearly two orders of magnitude, as demonstrated for hydrogen dimer chains and water clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Meteorological and Hydrological Drought Analysis Datasets for Livneh, ClimRR, and TGW

The current dataset contains data upload links to the following SPI & SRI drought analysis data over CONUS: Climate Forcing and Simulation Scenario: Livneh (https://www.nature.com/articles/sdata201542): Historical ClimRR (https://climrr.anl.gov/climrrdata): Historical, Mid-Century, End-Century TGW (https://tgw-data.msdlive.org/): Historical, Mid-Century, End-Century Analysis Period: Vary by Climate Forcing Drought Type: Meteorological (Precipitation) and Hydrological (Runoff) Drought (3-Month SRI) Output Format: NetCDF and CSV Spatial Resolution: 1/16th Degree for NetCDF and HUC4 for CSV Temporal Resolution: Monthly

Tidwell, Vincent C [Pacific Northwest National Lab↗
DOE OSTI2020

Simulation of Cross-Border Renewable Energy Trading in South Asia [Slides]

India's national renewable energy zones for wind power and solar photovoltaics (PV) could become regional green power resources if South Asian countries liberalize their rules for cross-border energy trading (CBET). Similarly, Nepal's wealth of hydropower could be more valuable to Nepal and its neighbors with greater market integration. These are the findings of a study by the U.S. National Renewable Energy Laboratory (NREL) that tested trading scenarios for wind power, solar power, and hydropower among Bangladesh, India, Nepal, and Sri Lanka. The NREL study found that wheeling power through India's interstate transmission system (ISTS) could be just as efficient operationally as building new high-voltage direct current (HVDC) lines from the renewable energy zones directly to the importing country. This means that CBET integration could substitute for new long-distance HVDC transmission - which could cost billions of dollars - while delivering to all participating countries the same benefits for renewable energy development and decarbonization.

13 HYDRO ENERGY↗
DOE OSTI2020

Cross-Border Electricity Trading and Renewable Energy Zones

India's national renewable energy zones for wind power and solar photovoltaics (PV) could become regional green power resources if South Asian countries liberalize their rules for cross-border energy trading (CBET). Similarly, Nepal's wealth of hydropower could be more valuable to Nepal and its neighbors with greater market integration. These are the findings of a study by the U.S. National Renewable Energy Laboratory (NREL) that tested trading scenarios for wind power, solar power, and hydropower among Bangladesh, India, Nepal, and Sri Lanka. The NREL study found that wheeling power through India's interstate transmission system (ISTS) could be just as efficient operationally as building new high-voltage direct current (HVDC) lines from the renewable energy zones directly to the importing country. This means that CBET integration could substitute for new long-distance HVDC transmission - which could cost billions of dollars - while delivering to all participating countries the same benefits for renewable energy development and decarbonization.

14 SOLAR ENERGY↗
DOE OSTI2021

An Overview of Policies Influencing Air Pollution from the Electricity Sector in South Asia

The electricity sector is a substantial source of air pollution and associated health problems in South Asia and elsewhere. Fossil-fueled power plants emit a wide variety of harmful pollutants. Those with the greatest health impacts are particulate matter and ozone. Once released into the atmosphere, there is no practical way to remove air pollutants, which means that policies designed to improve air quality have to limit the pollutants before release. However, tackling such pollution is challenging because developing economies also need to provide electricity as a basic necessity for their citizens and as an engine of economic growth. This report provides examples of policies impacting air pollution from the fossil-fuel electricity sector in the South Asian countries of Afghanistan, Bangladesh, Bhutan, India, the Maldives, Nepal, Pakistan, and Sri Lanka. Some of this information was difficult to locate, so this is not a comprehensive study, but rather an overview or "scan" of the sector that includes examples of (1) policies that directly regulate air quality by limiting emissions from specific point sources (by restricting operating hours, for instance), and (2) indirect policies that incentivize or disincentivize polluting activities, such as policies to encourage fuel switching, for example. The report shows (1) the great variation among the policy instruments used in each country, (2) that many countries, especially those that have a mismatch between seasonal demand and resource availability, could improve energy security and reduce air pollution through increased cross-border electricity trade, and (3) some countries have contradictory policies (promoting both coal and renewables, for instance).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Field Validation of Packaged RAD-AC HVAC System: Efficiency and Load Shifting via Electrochemical Regeneration of Liquid Desiccants

In this project, Mojave and SRI have demonstrated field validation and load shifting of liquid desiccant air conditioning systems with two liquid desiccant dedicated outdoor air system (DOAS) air conditioner units – one employing traditional thermal desiccant regeneration and the other utilizing Mojave’s novel electrochemical desiccant regeneration technology based on Redox Assisted electrodialysis. The Redox Assisted Dehumidification Air Conditioning (RAD-AC) technology is further developed and validated in this work to demonstrate an Integrated Seasonal Moisture Removal Efficiency (ISMRE) > 5.0 kg/kWh and shifting of ≥ 10% electric load in ≤ 72 hours. Furthermore, the longevity and durability of Mojave’s liquid desiccant air conditioning technology is validated in field testing of the thermally regenerated unit, with the unit demonstrating operation with >90% uptime while experiencing an efficiency degradation of < 10% during a testing campaign of over 5400 hours.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

A stilbene–strontium iodide based radioxenon detection system for monitoring nuclear explosions

Atmospheric measurement of noble gases has been extensively used for monitoring clandestine nuclear weapon explosions for many years. The ratios of four xenon isotopes of interest ( 131 mXe, 133 mXe, 133 Xe, and 135 Xe) help in discriminating regular reactor operations from nuclear tests. A new coincidence-based detection system using stilbene and strontium iodide [SrI 2 (Eu)] for electron and photon detection respectively was developed at Oregon State University to address some of the challenges of the radioxenon systems deployed in the field such as memory effect, and poor energy resolution. Silicon photomultipliers (SiPMs) were used for sensing optical photons from all scintillation media. Real-time coincidence identification was achieved using the eight-channel digital pulse processor. The detection system was evaluated using lab check sources and Oregon State TRIGA reactor irradiated radioxenon samples. A 48-hour background coincidence spectrum was collected yielding a coincidence count rate and background rejection rate of 0.0174 ± 0.0003 counts per second (cps) and 98.9% respectively. The minimum detectable concentration (MDC) of the system was evaluated to be 0.11 ± 0.01, 0.13 ± 0.02, 0.20 ± 0.02, and 0.73 ± 0.08 for 131 mXe, 133 mXe, 133 Xe, and 135 Xe respectively. The memory effect of the detection system was found to be 0.069 ± 0.015%, which is almost a 70-fold reduction compared to traditional plastic scintillators. Here, the detection elements, custom-designed electronics, and the detector response to radioxenon are detailed in this work.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗