Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spherical Fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Images of the earth's aurora and geocorona from the Dynamics Explorer mission

Several series of auroral and geocoronal images from th Dynamics Explorer Mission are presented and analyzed. It is found that the motion of the transpolar arc of a theta aurora is correlated with the y-component of the IMF; the arc motion is in the general direction of the y-component. In addition, a sequence of global images of a small auroral substorm shows the initial development of intense luminosities in a relatively small spatial region or 'bright spot' in the premidnight sector of the auroral oval and a subsequent appearance of an expanding area of lesser intensities at low latitudes and contiguous to the midnight boundary of the bright spot. Finally, a series of images of the geocorona in scattered solar Ly-alpha emissions is used to obtain a best-fit spherical model of atomic hydrogen densities in the earth's exosphere; a Chamberlain model provides an adequate fit to radial distances of 4.5 earth-radii, beyond which an exponential fit is used. The geocoronal tail is detected as an asymmetric increase in scattered Ly-alpha intensities in the antisolar direction.

Frank, L. A.↗
NASA NTRS1994

Optical Analysis of an Ultra-High resolution Two-Mirror Soft X-Ray Microscope

This work has summarized for a Schwarzschild microscope some relationships between numerical aperture (NA), magnification, diameter of the primary mirror, radius of curvature of the secondary mirror, and the total length of the microscope. To achieve resolutions better than a spherical Schwarzschild microscope of 3.3 Lambda for a perfectly aligned and fabricated system. it is necessary to use aspherical surfaces to control higher-order aberrations. For an NA of 0.35, the aspherical Head microscope provides diffraction limited resolution of 1.4 Lambda where the aspherical surfaces differ from the best fit spherical surface by approximately 1 micrometer. However, the angle of incidence varies significantly over the primary and the secondary mirrors, which will require graded multilayer coatings to operate near peak reflectivities. For higher numerical apertures, the variation of the angle of incidence over the secondary mirror surface becomes a serious problem which must be solved before multilayer coatings can be used for this application. Tolerance analysis of the spherical Schwarzschild microscope has shown that water window operations will require 2-3 times tighter tolerances to achieve a similar performance for operations with 130 A radiation. Surface contour errors have been shown to have a significant impact on the MTF and must be controlled to a peak-to-valley variation of 50-100 A and a frequency of 8 periods over the surface of a mirror.

Shealy, David L.↗
NASA NTRS1984

Coordinated multifrequency observations of the BL Lacertae objects Mrk 180 and Mrk 501

The continuous spectra of the nearby BL Lac objects Mrk 180 and Mrk 501 have been investigated by making coordinated observations at X-ray, ultraviolet, optical, and radio wavelengths. The observations were planned in order to obtain single-epoch snapshots, or time-frozen spectra, of the emission at many different wavelengths. The spectra were fitted with spherically symmetric, synchrotron self-Compton models and relativistic jet models with relaxed assumptions of spherical geometry and homogeneity and allowance for relativistic motion. It is found that these models provide accurate fits to the observed spectra and tighter constraints on the physical parameters. These models are also not dependent on uncertain source size and synchrotron break frequency.

Mufson, S. L.↗
NASA NTRS1983

Photoionization models for the winds from cataclysmic variables

Photoionization models are presented for the relative abundances of Si IV, C IV, and N V as a function of the ionization parameter and shape of the ionizing continuum spectrum in the EUV and X-ray energy range. These models are applied to the interpretation of the UV resonance lines observed from the cataclysmic variable TW Virginis by Cordova and Mason. The observed lines are assumed to be formed in gas flowing supersonically out from the continuum source in the form of a stellar wind. It is shown that the shape of the ionizing spectrum can be determined without assuming that the outflow is spherical by fitting to ratios of the line strengths. Models which fit the observed ratios include an X-ray continuum with a low-energy cutoff and may also include a lower luminosity component in the EUV spectral region. Under the added assumption of spherical outflow the derived ionization parameter for the X-ray component can be used to constrain the total mass flux in the wind.

Kallman, T. R.↗
NASA NTRS1974

Short-range interaction between hydrogen molecules

Recent calculations of the ground state energy of a system of four hydrogen atoms are reviewed with the aim of discerning the short-range repulsive part of the interaction potential between two hydrogen molecules. Extended-basis CI calculations which include a diffuse 2p orbital appear to be capable of determining the total interaction energy between to hydrogen molecules for any separation. Consistent results of such calculations suggest that the potential for intermolecular separations in the region from 1 to 2.5 A can now be specified to better than 10% with considerable confidence. Analytic fits to spherical averages of these results are presented.

Mcmahan, A. K.↗
NASA NTRS2003

The Mid-Infrared Emitting Dust Around AB Aurigae

Using the Keck I telescope, we have obtained 11.7 and 18.7 microns images of the circumstellar dust emission from AB Aur, a Herbig Ae star. We find that AB Aur is probably resolved at 18.7 microns with an angular diameter of 1.2 in. at a surface brightness of 3.5 Jy arc/sq sec. Most of the dust mass detected at millimeter wavelengths does not contribute to the 18.7 microns emission, which is plausibly explained if the system possesses a relatively cold massive disk. We find that models with an optically thick, geometrically thin disk surrounded by an optically thin spherical envelope fit the data somewhat better than flared disk models.

Chen, C. H.↗
NASA NTRS1966

Spherical pipe joint delivers loads equally to mating flange

Oxidizer inlet duct with a ball joint pipe fitting incorporating two spherical bearing races and balls in contact with centering cage springs transmits an evenly distributed load to the mating flange. This design should find application in piping systems where unequal load distributions exist.

Pfleger, R. O.↗
NASA NTRS1999

Chemical Abundances of the Planetary Nebula IC 4634 and Its Central Star

We have measured the spectral line intensities of the metal poor planetary nebula IC 4634. Using a photo-ionization model calculation, we try to fit the the optical and UV region spectra, i.e., Hamilton Echelle and IUE observations. From direct images, one expects complicated density variations, but the model predicts a range in densities that may be smaller than actually exist. We find N(sub epsilon) approximates 5000 /cubic meter. In spite of the geometrical complexity of the S shaped double-lobed structure, the simple photoionization model with a spherical symmetry can fit most emission lines, fairly well. The derived chemical composition has been compared with previous estimates and also with the Sun - The metallicity in IC 4634 appears to be lower than in the Sun or the average planetary nebula. The most likely temperature of the central ionizing source of IC 4634 appears to be about 55,000 K. We find a central star mass of about 0.55 Solar Mass from comparison with theoretical evolutionary tracks.

Hyung, S.↗
NASA NTRS1990

Numerical experiments in geomagnetic modeling

Numerical tests were made, using least squares fitting of a spherical harmonic model, to a selection of Magsat data to determine the practical limits of this technique with modern computers. The resulting (M102189) model, whose coefficients were adjusted up to n = 50, was compared with M07AV6, a previous model which used least squares (on vector data) for coefficients up to n = 29, and Gauss-Legendre quadrature (on Z residuals) to adjust the coefficients up to n = 63. For the new least squares adjustment to n = 50 a condition number of 115 was obtained for the solution matrix, with a resulting precision of 11 significant figures. The M102189 model shows a lower and more Gaussian residual distribution than did M07AV6, though the Gaussian envelope fits to the residual distributions, even for the scalar field, gives "standard deviations' never lower than 6 nT, a factor of three higher than the estimated Magsat observational errors. Ionospheric currents are noted to have a significant effect on the coefficients of the internal potential functions.

Cain, Joseph C.↗
NASA NTRS1975

The complex magnetic field of Jupiter

An analysis of the characteristics of the magnetic field of the planet Jupiter is presented. The data were obtained during the flight of Pioneer 11 space probe, using a high field triaxial fluxgate magnetometer. The data are analyzed in terms of traditional Schmitt normalized spherical harmonic expansion fitted to the observations in a least squares sense. Tables of data and graphs are provided to summarize the findings.

Acuna, M. H.↗
NASA NTRS1993

Lunar gravitational field estimation and the effects of mismodeling upon lunar satellite orbit prediction

Lunar spherical harmonic gravity coefficients are estimated from simulated observations of a near-circular low altitude polar orbiter disturbed by lunar mascons. Lunar gravity sensing missions using earth-based nearside observations with and without satellite-based far-side observations are simulated and least squares maximum likelihood estimates are developed for spherical harmonic expansion fit models. Simulations and parameter estimations are performed by a modified version of the Smithsonian Astrophysical Observatory's Planetary Ephemeris Program. Two different lunar spacecraft mission phases are simulated to evaluate the estimated fit models. Results for predicting state covariances one orbit ahead are presented along with the state errors resulting from the mismodeled gravity field. The position errors from planning a lunar landing maneuver with a mismodeled gravity field are also presented. These simulations clearly demonstrate the need to include observations of satellite motion over the far side in estimating the lunar gravity field. The simulations also illustrate that the eighth degree and order expansions used in the simulated fits were unable to adequately model lunar mascons.

Davis, John H.↗
NASA NTRS2000

Imaging the Sunyaev-Zeldovich Effect in the High Redshift Galaxy Cluster MS1137+66

We present interferometric measurements of the Sunyaev-Zelldovich Effect (SZE) in MS1137+66, a distant galaxy cluster at a redshift of 0.78. The data were obtained in 1997 and 1998 at the Berkeley-Illinois-Maryland millimeter array using sensitive 28.5 GHz receivers optimized for imaging of the SZE, with a total on-source integration time of 87.8 hours. We discuss constraints derived from spherical "beta" model fits to the SZE data, place an upper limit on the strength of any possible radio point sources in the field, and compare the results with the x-ray data published by Donahue et al. in 1999.

Joy, M. K.↗
NASA NTRS1998

Multipath calibration in GPS pseudorange measurements

Novel techniques are disclosed for eliminating multipath errors, including mean bias errors, in pseudorange measurements made by conventional global positioning system receivers. By correlating the multipath signals of different satellites at their cross-over points in the sky, multipath mean bias errors are effectively eliminated. By then taking advantage of the geometrical dependence of multipath, a linear combination of spherical harmonics are fit to the satellite multipath data to create a hemispherical model of the multipath. This calibration model can then be used to compensate for multipath in subsequent measurements and thereby obtain GPS positioning to centimeter accuracy.

Kee, Changdon↗
NASA NTRS2002

Analytical Simulations of Energy-Absorbing Impact Spheres for a Mars Sample Return Earth Entry Vehicle

Nonlinear dynamic finite element simulations were performed to aid in the design of an energy-absorbing impact sphere for a passive Earth Entry Vehicle (EEV) that is a possible architecture for the Mars Sample Return (MSR) mission. The MSR EEV concept uses an entry capsule and energy-absorbing impact sphere designed to contain and limit the acceleration of collected samples during Earth impact without a parachute. The spherical shaped impact sphere is composed of solid hexagonal and pentagonal foam-filled cells with hybrid composite, graphite-epoxy/Kevlar cell walls. Collected Martian samples will fit inside a smaller spherical sample container at the center of the EEV's cellular structure. Comparisons were made of analytical results obtained using MSC.Dytran with test results obtained from impact tests performed at NASA Langley Research Center for impact velocities from 30 to 40 m/s. Acceleration, velocity, and deformation results compared well with the test results. The correlated finite element model was then used for simulations of various off-nominal impact scenarios. Off-nominal simulations at an impact velocity of 40 m/s included a rotated cellular structure impact onto a flat surface, a cellular structure impact onto an angled surface, and a cellular structure impact onto the corner of a step.

Billings, Marcus Dwight↗
NASA NTRS1966

Hollow spherical rotors fabricated by electroplating

Equatorial bands are fabricated to provide a locating fit for the hemispheres of hollow spherical rotors which are then jointed by electroplating. Several nonmagnetic materials may be used to form the joint, such as aluminum, copper, iron, gold, plantinum, and zinc.

Avery, H. W.↗
NASA NTRS1985

Venus gravity - A harmonic analysis and geophysical implications

An improved theoretical model of Venusian global gravity has been obtained by fitting a tenth degree spherical harmonic series to 78 orbital arcs of Doppler tracking data from the Pioneer Venus Orbiter. Maps of the free-air anomaly and its formal error are presented. Isostatic anomaly and 'Geoid' maps are also presented, and their geophysical implications are discussed in details. Comparison with equivalent resolution topographic models reveals a strong correlation between long wavelength gravity and the topography of Venus. Analysis of the second degree harmonics showed two aspects of the orientation of the inertial axes of Venus: (1) a significant (about three degrees) departure of the axis of greatest inertia from the rotational axis; and (2) a near alignment of the axis of least inertia with the location of the subterrestrial point at the time of the next inferior conjunction with earth (December 16, 2101). A series of contour maps of the Venusian free-air anomalies is provided.

Mottinger, N. A.↗
NASA NTRS1989

The figure of Phobos

The figure of Phobos is presently modeled by a sixth-degree-and-order spherical harmonic expansion that fits the observed surface to an accuracy of a few hundred m, as validated through the use of control points, limbs, terminators, map projections, and predicted rotational properties. Only the region around the large crater, Stickney, exhibits lower accuracy. The forced libration amplitude obtained closely matches the observed value; this supports the view of Phobos as possessing a uniform density distribution.

Duxbury, Thomas C.↗