SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The BOREAS TF-1 team collected several data sets in support of its efforts to characterize and interpret soil information at the SSA-OA tower site in 1994 as part of BOREAS. Data sets collected include soil respiration, temperature, moisture, and gravimetric data. The data are stored in tabular ASCII format.
Forest development patterns following disturbance are known to influence the physical and chemical attributes of soils at different points in time. Changes in soil resources are thought to have a corresponding effect on ectomycorrhizal (ECM) community structure. We used molecular methods to compare below-ground ECM species richness, composition, and abundance between adjacent stands of homogenous lodgepole pine and old growth mixed conifer in Yellowstone National Park (YNP). In each stand-type we collected soil cores to both identify mycorrhizae and assess soil chemistry. Although no statistical difference was observed in the mean number of ECM root tips per core between stand types, the total number of species identified (85 versus 35) and the mean number of species per core (8.8 +/- 0.6 versus 2.5 +/- 0.3) were significantly higher in lodgepole pine. Differences between the actual and estimated species richness levels indicated that these forest types support a high number of ECM species and that undersampling was severe. Species compositions were widely disparate between stands where only four species were shared out of a total of 116. Soil analysis also revealed that mixed conifer was significantly lower in pH, but higher in organic matter, potassium, phosphorus, and ammonium when compared to lodgepole pine stands. Species richness per core was correlated with these chemical data, however, analysis of covariance indicated that stand type was the only statistically significant factor in the observed difference in species richness. Our data suggest that ECM fungal richness increases as homogenous lodgepole pine stands grow and mature, but declines after Engelmann spruce and subalpine fir colonize. Despite difficulties linking species composition with soil chemistry, there are a variety of physical and chemical factors that could be influencing ECM community structure. Future field experiments are necessary to test some of the mechanisms potentially operating within this system.
Characteristics of lunar soil are examined. The paper includes topics such as lunar soil genesis, particle types, grain size distribution, grain shape distribution, specific gravity, minimum and maximum density, and relative density. Lunar soil, consisting of complex mixtures of mineral fragments, miscellaneous glasses, agglutinates, and lithic fragments, is produced primarily by meteorite impacts. The grain size distributions for soils exposed to meteorite reworking for 100 million yr or more are classified as well-graded silty sands and sandy silts. The specific gravity of submillimeter lunar soil samples varies from 2.9 to 3.24 and individual particles range from 1.0 to greater than 3.32. Differences in specific gravity, intragranular porosity, particle shape, surface texture, and grain arrangements result in wide ranges in minimum and maximum densities. Meteorite impacts cause in situ lunar soil to have a low relative density at the surface which increases rapidly to a very high relative density at depths greater than 10 cm to 20 cm.
Explore the source record for details and available documents.
Soil moisture characteristics predicted by the Arya-Paris model were compared with the laboratory measured data for 181 New Jersey soil horizons. For a number of soil horizons, the predicted and the measured moisture characteristic curves are almost coincident; for a large number of other horizons, despite some disparity, their shapes are strikingly similar. Uncertainties in the model input and laboratory measurement of the moisture characteristic are indicated, and recommendations for additional experimentation and testing are made.
A soil plant atmosphere model for corn (Zea mays L.) together with the scaling theory for soil hydraulic heterogeneity are used to study the sensitivity of spatial variation of canopy temperature to field averaged soil texture and crop rooting characteristics. The soil plant atmosphere model explicitly solves a continuity equation for water flux resulting from root water uptake, changes in plant water storage and transpirational flux. Dynamical equations for root zone soil water potential and the plant water storage models the progressive drying of soil, and day time dehydration and night time hydration of the crop. The statistic of scaling parameter which describes the spatial variation of soil hydraulic conductivity and matric potential is assumed to be independent of soil texture class. The field averaged soil hydraulic characteristics are chosen to be representative of loamy sand and clay loam soils. Two rooting characteristics are chosen, one shallow and the other deep rooted. The simulation shows that the range of canopy temperatures in the clayey soil is less than 1K, but for the sandy soil the range is about 2.5 and 5.0 K, respectively, for the shallow and deep rooted crops.
Land surface modeling provides the opportunity to investigate winter soil processes such as soil freezing and thawing over large domains. However, the variability in simulated winter soil characteristics among land surface models and forcing datasets is not well understood. In this study, a nine-member ensemble was employed to characterize the spatial and inter-annual variability of three winter soil characteristics, annual number of frozen days, annual minimum temperature and annual number of freeze-thaw cycles over North America during the water years 2010–2016. The ensemble, including three land surface model (JULES, Noah2.7.1 and Noah-MP) and three forcing datasets (ECMWF, GDAS and MERRA2), was developed through the Snow Ensemble Uncertainty Project (SEUP). In many regions, there was remarkably good agreement across the ensemble for the winter soil temperatures. However, the variability among the ensemble's annual number of frozen days, as quantified with standard deviation, exceeded 150 days at the northern Pacific coastline. While the differences among the ensemble members' annual minimum temperature were typically <3 °C, the differences exceeded 6 °C north of 50°N. The ensemble members generally agreed within one to three freeze-thaw cycles in mid latitude regions, Alaska, and the south and west coasts of the USA. High variability among the ensemble, more than six freeze-thaw cycles, occurred in the Great Plains, northern Pacific coastline, and along the Appalachian Mountains. Differences in winter soil temperature characteristics were more apparent among the LSMs rather than the meteorological forcing datasets. Except for maritime regions, the Noah2.7.1 members had the fewest annual number of frozen days and the least number of freeze-thaw cycles. Noah2.7.1 also had the coldest annual minimum temperatures except for ephemeral regions. Comparisons between in-situ observations and the SEUP estimates of winter soil characteristics revealed that the modeled frozen period was much longer than observed, that the modeled annual minimum temperatures were much colder than observed, and the modeled freeze-thaw cycles occurred more frequently than observed. Excluding the high latitude sites, the observed frozen period is less than two months with the minimum temperature above − 5 °C at most of the studied sites, while the ensemble members simulated, on average, a four month frozen period with − 10 °C minimum temperature. Errors in capturing snow during the accumulation period appear to impact differences in modeled versus observed soil temperature throughout the entire winter.
A patent was recently granted to the U.S. Army for an adaptation of a soil cone penetrometer that can be used to measure the spectral characteristics (fluorescence or reflectance) of soils adjacent to the penetrometer rod. The system can use a variety of light sources and spectral analytical equipment. A laser induced fluorescence measuring system has proven to be of immediate use in mapping the distribution of oil contaminated soil at waste disposal and oil storage areas. The fiber optic adaptation coupled with a cone penetrometer permits optical characteristics of the in-situ soil to be measured rapidly, safely, and inexpensively. The fiber optic cone penetrometer can be used to gather spectral data to a depth of approximately 25 to 30 m even in dense sands or stiff clays and can investigate 300 m of soil per day. Typical detection limits for oil contamination in sand is on the order of several hundred parts per million.
Literature survey and experiments on stress deformation characteristics of solids under static loading
The data set contains a portion of the International Heat Stress Genotype Experiment (IHSGE) data used in the AgMIP-Wheat project to analyze the uncertainty of 30 wheat crop models and quantify the impact of heat on global wheat yield productivity. It includes two spring wheat cultivars grown during two consecutive winter cropping cycles at hot, irrigated, and low latitude sites in Mexico (Ciudad Obregon and Tlaltizapan), Egypt (Aswan), India (Dharwar), the Sudan (Wad Medani), and Bangladesh (Dinajpur). Experiments in Mexico included normal (November-December) and late (January-March) sowing dates. Data include local daily weather data, soil characteristics and initial soil conditions, crop measurements (anthesis and maturity dates, anthesis and final total above ground biomass, final grain yields and yields components), and cultivar information. Simulations include both daily in-season and end-of-season results from 30 wheat models.
Soil response to dynamic loads measured by penetrometers
The dust problem and fender design for the LRV were studied under reduced gravity with a lunar soil simulant. The test equipment, soil characteristics of the lunar soil simulant, and the test procedures are described. It is concluded: (1) The fender plus flap design is adequate. (2) Vacuum conditions tend to eliminate or reduce suspended dust clouds. (3) Reduced gravity conditions tend to increase the dust problems. (4) Slow starting speeds are necessary to minimize slip and reduce initial dust generation.
The correct interpretation of thermal and hydraulic soil parameters infrared from remotely sensed data (thermal infrared, microwaves) implies a good understanding of the causes of their temporal and spatial variability. Given this necessity, the sensitivity of the surface variables (temperature, moisture) to the spatial variability of hydraulic soil properties is tested with a numerical model of heat and mass transfer between bare soil and atmosphere. The spatial variability of hydraulic soil properties is taken into account in terms of the scaling factor. For a given soil, the knowledge of its frequency distribution allows a stochastic use of the model. The results are treated statistically, and the part of the variability of soil surface parameters due to that of soil hydraulic properties is evaluated quantitatively.
DOMEX (Drilling on the Moon and Mars in Human Exploration) is using analog missions to develop the approach for using human crews to perform science activities on the Moon and Mars involving exploration and sampling of the subsurface. Subsurface science is an important activity that may be uniquely enabled by human crews. DOMEX provides an opportunity to plan and execute planetary mission science activities without the expense and overhead of a planetary mission. Objectives: The objective of this first in a series of DOMEX missions were to 1) explore the regional area to understand the geologic context and determine stratigraphy and geologic history of various geologic units in the area. 2) Explore for and characterize sites for deploying a deep (10 m depth) drilling system in a subsequent field season. 3) Perform GPR on candidate drill sites. 4) Select sites that represent different geological units deposited in different epochs and collect soil cores using sterile procedures for mineralogical, organic and biological analysis. 5) Operate the MUM in 3 different sites representing different geological units and soil characteristics. 6) Collect rock and soil samples of sites visited and analyze them at the habitat. Results: At mission start the crew performed a regional survey to identify major geologic units that were correlated to recognized stratigraphy and regional geologic maps. Several candidate drill sites were identified. During the rest of the mission, successful GPR surveys were conducted in four locations. Soil cores were collected in 5 locations representing soils from 4 different geologic units, to depths up to 1m. Soil cores from two locations were analyzed with PCR in the laboratory. The remainder were reserved for subsequent analysis. XRD analysis was performed in the habitat and in the field on 39 samples, to assist with sample characterization, conservation, and archiving. MUM was deployed at 3 field locations and 1 test location (outside the habitat) where it operated autonomously for 2-4 hours at each site. Depths achieved ranged from 15 to 70 cm depending on the soil compressive strength and the presence and depth of subsurface indurated layers. Subsurface samples weighing 0.5 to 1 g were collected at the deepest depth encountered at each of the sites using the MUM automated sample collection system, and subsequently analyzed with XRD. Downhole inspection of holes produced by MUM with the Raman spectrometer was acquired on two of the holes and spectral features associated with selenite were identified in specific soil layers. Previously unreported fossilized remains of vertebrate fauna from the Jurassic era were discovered during our mission. Analysis of mineral biomarkers associated with this discovery are underway.
Penetrometer to test soil characteristics has a piercing head with soil instrumentation equipment attached to an expandable mast actuated by compressed air. The penetrometer gives continuous measurements as the mast pushes the piercing head through the soil.
The mobile agricultural radar sensor was used to collect data from 31 fields in the floodplain of the Kansas River east of Lawrence, Kansas during the summer of 1981. Corn, soybeans, and wheat crops were observed from May 1 to November 11. Radar backscattering measurements were acquired at 10.2 GHz for VV and VH polarizations at 50 deg incidence angles for all fields and at 30 deg, 40 deg, 50 deg, 60 deg, and 70 deg for nine of the 31 fields. Target parameters describing the vegatation and soil characteristics, such as plant moisture, plant height, soil moisture, etc., were also measured. The methodology, radar backscatter data and associated ground-truth data obtained during this experiment are documented.
The data set includes a current representative management treatment from detailed, quality-tested sentinel field experiments with wheat from four contrasting environments including Australia, The Netherlands, India and Argentina. Measurements include local daily climate data (solar radiation, maximum and minimum temperature, precipitation, surface wind, dew point temperature, relative humidity, and vapor pressure), soil characteristics, frequent growth, nitrogen in crop and soil, crop and soil water and yield components. Simulations include results from 27 wheat models and a sensitivity analysis with 26 models and 30 years (1981-2010) for each location, for elevated atmospheric CO2 and temperature changes, a heat stress sensitivity analysis at anthesis, and a sensitivity analysis with soil and crop management variations and a Global Climate Model end-century scenario.
Soil association maps show the spatial relationships of land units having characteristic soil depths and textures, available water capacities, permeabilities, pH characteristics, plasticity indices, liquid limits, and the like, from which broad interpretations can be made such as how the soil is suited as a source for top soil, and as a source for sand and gravel, and how corrosive the soil is for steel and concrete, and what crop and grass yields can be expected. Film color composites of bands 4, 5 and 7 viewed over a light table with magnification show the soil associations of western South Dakota that are now recognized, and, in addition, several new soil association areas have been brought to light.