Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Serpentinization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Geochemical-hydromechanical couplings during water-serpentinized harzburgite interactions at 20° C and 30 bars

Interaction of groundwater with the serpentinized harzburgites of the upper mantle plays an important role in the geologic carbon cycle and serpentinization processes. Here, in this study, an intact serpentinized harzburgite with more than 60% lizardite from the Semail ophiolite in Oman was reacted with water at near neutral pH and low PCO 2 to observe its dissolution behavior and reaction path within the CaO-MgO-SiO 2 -CO 2 -H 2 O system at 20 °C and 30 bars. In the experiment, mass (i.e. H 2 O, ions) transfer is by diffusion and the selected temperature and pressure conditions mimic water-rock interactions at the shallow portions of most ultramafic rock hosted aquifers. Equilibrium activity-activity diagrams and thermodynamic data were used to compare the experimentally determined reaction path with the theoretical stability boundaries for minerals involved to investigate the evolution of bulk chemical composition, mineralogy, and water composition. The experiments demonstrated that (i) the water-rock interactions increased the pH of the aqueous phase from 5.9 to 7.5 over a period of 18 weeks; (ii) the dissolution of lizardite, orthopyroxene (enstatite), and clinopyroxene (diopside and augite) increased the concentration of Mg, Ca, and Si in the aqueous phase; (iii) the dissolution was incongruent with respect to Mg and Si, favoring Si release at pH > 6 due to (a) breaking of more reactive cation‑oxygen bonds that is consistent with the stoichiometry of magnesium for proton exchange reaction which favors a surface that is enriched in Mg at basic conditions, and (b) preferential dissolution of clinopyroxene Mg 1.30 Ca 0.52 Fe 0.06 Si 2 O 6 ; (iv) the aqueous phase was undersaturated with respect to carbonate (e.g. calcite, magnesite, and hydromagnesite) and hydrous (e.g. lizardite, chrysotile, brucite, and talc) minerals; (v) the bulk chemical composition and mineralogy of the intact serpentinized harzburgite matrix did not change; (vi) the thermodynamic data can successfully predict water-intact serpentinized harzburgite behavior if the water chemical composition can be constrained; and (vii) no detectable macroscopic form of damage (e.g. microcracks forming as a result of differential stress fields due to changes in volume during chemical reaction) was observed.

Carbonation↗
DOE OSTI2025

Reactive Transport Modeling of Hydrogen Production from Serpentinization of Olivine

Hydrogen production from serpentinization of ultramafic rocks represents a promising natural pathway for generating carbon-free energy, yet its kinetics and controlling factors remain incompletely understood. A key challenge in advancing serpentinization research lies in the heterogeneity of porosity and permeability in rocks, which leads to nonuniform fluid velocity fields, as well as uncertainties in estimating reactive surface area and identifying appropriate mineral reaction equilibria. Additional complexities arise from the role of dissolved SiO 2 , Fe 2+ /Fe 3+ partitioning, and the limited effect of pH variations within the strongly alkaline regime on hydrogen yields. These challenges hinder straightforward extrapolation from laboratory tests to practical applications of hydrogen production from natural rocks. Here, in this work, we address these questions using a simulation-based reactive transport modeling framework calibrated against controlled laboratory experiments reported elsewhere. The model couples geochemical kinetics, multiphase flow, and mineralogical feedbacks, enabling systematic evaluation of how surface area, dissolved silica concentration, Fe redox state, temperature, and pressure govern serpentinization and H2 generation. We find that surface area exerts the strongest control on reaction rates and hydrogen yields, while Fe 2+ /Fe 3+ ratios act as secondary modulators. Elevated dissolved silica concentrations suppress hydrogen production but accelerate serpentine precipitation, whereas increasing pH beyond 12 within the strongly alkaline regime produces only marginal gains. Finally, we demonstrate that integrating targeted experiments with calibrated simulations offers a powerful and efficient approach for predicting hydrogen yields and assessing parameter trade-offs in industrial-scale applications. This integration can substantially reduce the experimental burden while improving predictive capability, thereby enhancing both the mechanistic understanding and the practical feasibility of hydrogen production from serpentinization.

08 HYDROGEN↗
DOE OSTI2025

Hydrogen Generation and Serpentinization of Olivine Under Flow Conditions

Serpentinization of olivine is often studied in the laboratory under batch conditions. Olivine conversion in situ with enhanced natural hydrogen production will likely be implemented via injection of aqueous solutions. Hence, transport is relevant to the extent of olivine reaction and, potentially, the morphology of precipitates formed. To test conditions for optimal H 2 generation and outcomes, serpentinization was induced by injecting pH = 12.5 brine at 0.015 cm 3 /min (0.5 pore volumes per day) into an olivine sand pack (250 to <355 μm grain size) at 245°C generating, at minimum 76 and 89 mol% H 2 at 35 and 57 d, respectively. Grain-coating serpentine with radiating needles cemented the reacted sand grains. Importantly, pore space was maintained between the dissolving grains and the serpentine precipitates. Hence, reactivity continued as a result of fluid access to mineral surfaces, the large grain size, and the continuous injection of undersaturated alkaline fluids.

08 HYDROGEN↗
DOE OSTI2026

Computer simulation of reaction and transport of core-scale serpentinization of Fe-bearing olivine and evolution of geological hydrogen

We present reactive flow and transport simulations of core-scale serpentinization of forsteritic, Fe-bearing olivine under hydrothermal conditions. The model captures fluid flow, evolving porosity–permeability, and redox-controlled H 2 production in a cylindrical core over 55 days at 245 °C and 37 bar. Key processes include olivine dissolution, precipitation of serpentine and magnetite, and oxidation of Fe2+ to Fe 3+ . Here, results show strong coupling among flow velocity, alteration front propagation, and spatially heterogeneous H 2 generation. Elevated H2 concentrations align with inlet-localized magnetite precipitation, consistent with experiments. Secondary mineral formation reduces porosity and permeability, altering transport pathways. Reactive flow at the fluid–solid interface governs H 2 generation rates and distribution. Dissolved SiO2 promotes serpentine and talc formation by suppressing brucite, while bicarbonate extends reaction duration and moderates surface complexation effects.

Geologic hydrogen↗
DOE OSTI2026

Chromium-for-Aluminum Substitution in Synthetic Serpentine

Cr-bearing clay minerals are products of hydrothermal alteration and fluid–rock interactions of ultramafic rocks that form serpentine minerals. Cr is typically observed to substitute for Al in serpentine minerals, but the crystal chemistry and environmental constraints on this substitution are unknown. Here, we synthesized endmember and Cr-substituted amesite, a typical Al-serpentine mineral, via the hydrothermal method. We found that the phase purity highly depends on the pH of the hydrothermal solution, which should be controlled at ~12.7 to avoid the formation of impurity phases. Additionally, amesite can incorporate Cr at a concentration equivalent to ~39.5% substitution of Al. The Cr-free and Cr-substituted amesite are highly defective and contain multiple polytypes, including 6R 2 , 2M 1 , and possibly 2H 2 . However, the relative proportions of these polytypes do not change with increasing chromium substitution.

Al-lizardite↗
DOE OSTI2025

Serpentine Magnet Designs for the Interaction Region of the Electron-Ion Collider (EIC)

The Electron-Ion Collider (EIC), hosted by Brookhaven National Laboratory, is designed to deliver a peak luminosity of 1 × 10 34 cm −2 sec −1 . The interaction region (IR) of the EIC imposes several constraints in terms of field quality, aperture, and spatial layout, which necessitates the development of several unique superconducting serpentine direct wind magnets. These magnets are constructed using either a single strand or a small-diameter 6-around-1 NbTi cable, presenting unique challenges for design and optimization. This paper introduces a new computational code specifically developed to streamline and integrate the design process for these magnets, enabling faster design iterations while addressing their complex requirements. Here, in this paper, we first introduce the code, which builds on established electromagnetic fundamentals. The code incorporates tools for optimizing winding patterns and for correcting magnetic multipoles; additionally, it interfaces with established magnet design software. We also present the design of several serpentine magnets for the EIC IR, demonstrating the code’s capability to deliver precise and efficient solutions. These designs highlight the code’s ability to accelerate the development cycle, ensuring the serpentine magnets meet the demanding specifications of the EIC project.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Structural Analysis of a Serpentine Superconducting Magnet for the Interaction Region of the Electron Ion Collider

The electron ion collider (EIC) is under design to collide the high energy and highly polarized hadron with electron beams with luminosities up to 10 34 cm −2 s −1 . The superconducting magnet designs at the interaction region (IR) are quite challenging due to the close proximity of the hadron and electron beams. Several serpentine types of superconducting magnets have been designed due to the space restrictions at the IR. Here, to validate the designs in terms of the mechanical strength, structural integrity, as well as the allowed deformations, a detailed structural mechanical analysis for a 12-layer superconducting quadrupole serpentine magnet (Q1BpR) in the rear side hadron beams has been carried out using the finite element method (FEM) considering the pretension stress, shrinking due to cool down, and the electromagnetic force on the conductors. Anisotropy material properties and individual roving tension have been considered. The electro-magnetic (EM) simulations were performed using COMSOL, confirmed with RAT, the structural mechanical analysis were performed using COMSOL by considering the contact elements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Reservoir-scale model of geologic hydrogen production from serpentinization: Cyclic injection in a dual-permeability fracture-matrix system

Geologic hydrogen (GeoH 2 ) from serpentinization is a promising low-carbon resource, but its reservoir-scale behavior remains poorly understood. We develop a dual-permeability reactive transport model for an injector–producer well pair in ultramafic rock that couples multiphase flow, heat transfer, geochemistry, and porosity–permeability evolution. Here, the model is calibrated to olivine flow-through experiments and upscaled to two-year long simulations with continuous injection and cyclic injection with shut-in-to-injection ratios (SIR = 1, 0.5, 0.1). Olivine reacts along high-flux pathways to form lizardite and magnetite, increasing pH; H 2 (aq) and H 2 (g) peak early and then decline as exsolution and advective export outpace local generation. Continuous injection yields the highest cumulative H 2 but the lowest water-use efficiency (1.138 x 10 –6 mol/kgw). Cyclic injection increases this ratio to 1.35 x 10 –6 , 1.377 x 10 –6 , and 1.182 x 10 –6 mol/kgw for SIR = 1, 0.5, and 0.1, respectively; SIR = 0.5 provides a ~20% improvement over continuous injection and the best compromise for pilot design.

08 HYDROGEN↗
DOE OSTI2025

Geochemical and Hydromechanical Stimulation for Reaction Acceleration (GeoHydRA) of Serpentinization for In Situ Hydrogen Production

The project team aims to develop an innovative approach to stimulate geological hydrogen generation by enhancing in-situ serpentinization of ultramafic rocks. This method can maximize hydrogen production by promoting reactive surface areas through controlled fracturing and optimizing fluid chemistry and flow rates. Key objectives include establishing optimal conditions for hydrogen generation, investigating subsurface limitations, and sustaining production via hierarchical crack systems.

08 HYDROGEN↗
DOE OSTI2026

Triple oxygen and hydrogen stable isotope composition of hydroxyl water in Orgueil (CI-type) and Tagish Lake (C2-type) carbonaceous chondrites

The primitive carbonaceous chondrites are of interest to cosmochemical science because they contain relatively large amounts of ‘water’ (H 2 O and/or OH – ) within phyllosilicate minerals. This water is evidence for the accretion of ices by their parent planetesimals, and thus represents an archive of the isotopic compositions of H 2 O in the protoplanetary environments. Here, in this study, we used thermogravimetry-enabled laser spectroscopy (TGA-IRIS) analyses of the Orgueil and Tagish Lake meteorites to make δ 2 H, δ 18 O, and Δ′ 17 O measurements of the H 2 O and OH – contained in the different hydrous minerals that comprise each meteorite. In Orgueil, we measured mass-weighted averages of OH – in the saponite and serpentine phyllosilicate matrix to be δ 2 H = 192 ‰, δ 18 O = 1.5 ‰, which are unquestionably of extraterrestrial origin with Δ′ 17 O = 1.0 ‰. For Tagish Lake, analogous values of OH– in the saponite and serpentine phyllosilicate matrix are δ 2 H = 704 ‰, δ 18 O = 11.3 ‰, and are similarly unambiguously extraterrestrial with Δ′ 17 O = 0.82 ‰. We estimate that the parent H 2 O involved in aqueous alteration of Orgueil had δ 18 O value ≥ +23 ‰. In Orgueil, we interpret the phyllosilicate petrographic relationships, and the δ 18 O values of OH – in saponite and serpentine to indicate that saponite formed first, at a lower temperature by 35 to 53 °C than serpentine. This suggests that the Orgueil parent body experienced increasing temperature during the phase of active aqueous alteration (prograde) which set the δ 18 O OH values of the serpentine and saponite. In the case of Tagish Lake, serpentine formed at a lower temperature by 32 to 60 °C than saponite, for the simplest case with constant δ 18 O H2O values. If serpentine formed first, followed by saponite formation at 32 to 60 °C °C higher temperature, this suggests that Tagish Lake sample TL1 underwent prograde aqueous alteration as the parent body heated up. We find evidence that the parent H 2 O for Orgueil, Tagish Lake sample TL1, and Murchison (based on data from a previous study) may have had Δ′ 17 O values of >0.64 ‰.

Aqueous alteration↗
DOE OSTI2025

In situ deformation of antigorite-olivine two-phase mixtures: Implications for dynamics and seismic anisotropy in the mantle wedge

Water released from hydrous minerals in subducting slabs reacts with the overlying plate, resulting in widespread serpentinization in the mantle wedge. Deformation of serpentinized peridotites has been invoked to explain forearc seismic anisotropy, yet studies of the mechanical properties and deformation behaviors of serpentine-bearing multiphase aggregates remain limited. Here we deformed olivine-antigorite mixtures containing 70, 50, and 20 vol.% of antigorite at 2.5 – 7.6 GPa, 673 K and strain rates of ∼10 –5 –10 –4 s –1 . Elasto-viscoplastic self-consistent simulations, constrained by synchrotron X-ray diffraction (XRD) data, were used to estimate lattice strain, stress–strain partitioning, crystallographic preferred orientations (CPO) development, and aggregate strength. Selected run products were also analyzed by electron backscatter diffraction for comparison with the CPO results obtained from XRD experiments. We found olivine transitions from A- or B-type to C-type when antigorite fraction drops to 20 vol.%, coinciding with a microstructural change from interconnected weak layers to a load-bearing framework (LBF). An additional run on a sample Atg50/Ol50 with preexisting microstructures suggested the formation of LBF was promoted by these microstructures, although the preexisting antigorite CPO has been overprinted at 20.8 % strain and could be erased completely by subsequent deformation in nature. Estimated viscosity of the two-phase mixtures suggests that low-degree serpentinization (≤20 %) in the mantle wedge may increase the strength of olivine-rich peridotite and hinder slab-mantle decoupling, whereas high-degree serpentinization (≥50–70 %) weakens the peridotite and favors decoupling if sufficient viscosity contrast (>10) develops. Seismic anisotropy shows a nonlinear dependence on antigorite fraction: antigorite CPO governs the anisotropy of the mixtures with ≥50 vol.% antigorite, whereas olivine CPO dominates at low fractions (∼20 vol.%). The presence of pre-existing microstructures reduces seismic anisotropy of the deformed mixtures, however the persistence of pre-existing CPO in actively subducting slabs remains uncertain, making their significance over geological timescales questionable.

Crystallographic preferred orientation↗
DOE OSTI2024

Flow field design for zero-gap microbial electrolysis cells using synthetic and real wastewater

Increasing performance in microbial electrolysis cells (MECs) requires the development of optimized reactor configurations with minimal internal resistance and capable to operate with real wastewater. Here, the impact of two different flow fields (serpentine and circular) was examined in zero-gap MECs with synthetic and real wastewaters. The serpentine flow field enabled a uniform distribution of the electrolyte in the anode chamber, resulting in larger current densities at lower flow rates compared to the circular flow field. Electrochemical tests using synthetic media with high buffer capacity revealed more stable and higher performance with the serpentine flow field compared to the circular flow path, producing larger current density (23.7 ± 0.8 A/m 2 vs 21.9 ± 5.6 A/m 2 ), hydrogen production rate (75.8 ± 4.1 L/L-d vs 54.3 ± 2.4 L/L-d), cathodic coulombic efficiency (>91 % vs >50 %), and an overall lower internal resistance (12.5 ± 0.5 mΩm 2 vs 14.8 ± 3.7 mΩm 2 ). Continuous operation for over 30 days with real wastewater indicated higher tolerance of the MECs with serpentine flow field toward media with large concentration of suspended solids, producing a current density of 5.4 ± 1.1 A/m 2 and a hydrogen production rate of 22.2 ± 6.2 L/L-d. Furthermore, the results presented here underscore the importance of reactor design and architecture in optimizing MEC performance for hydrogen production from liquid wastes.

flow path↗
DOE OSTI2026

Stimulated geologic hydrogen: from mechanistic control to engineered rock transformation

Geologic hydrogen (GeoH 2 ) generated from subsurface iron-rich rock–water reaction (i.e., serpentinization) is emerging as a promising candidate for the next primary energy source. Yet, accelerating GeoH 2 production from geological to human timescales via enhanced serpentinization remains a formidable scientific and technical challenge. Here, in this Review, we decipher the mechanistic control and explore strategies for accelerating in situ, engineered iron-rich rock transformation into carbon-free GeoH 2 by orders of magnitude. Serpentinization rate is hindered by low porosity and permeability of source rocks, suboptimal temperatures, unfavorable water chemistry, inefficient Fe 2+ -to-Fe 3+ conversion, thermodynamic constraints, and low reactive surface area. While closed-system experiments provide valuable mechanistic insights, open-system conditions with fluid circulation are more crucial for economically viable GeoH 2 production. We assess stimulation techniques from enhanced hydrocarbon and geothermal recovery as tools to be adopted or adapted for increasing reactive surface areas for stimulated GeoH2 production. We estimate that 7.40 × 10 5 to 1.73 × 10 6 million metric tons (Mt) of hydrogen could be engineered over 20 to 50 years from about 10% iron-rich rocks within 10 km depth of continental crust. Enabling GeoH 2 as a viable energy source requires not only advancing scientific frontiers but also forming a global GeoH 2 research network and innovation ecosystem to address the critical scientific, technical, societal, economic, and policy challenges.

08 HYDROGEN↗
DOE OSTI2025

Geologic hydrogen as an emerging fuel: experimental insights, thermodynamics, kinetics, and reactive transport modeling

Geologic hydrogen (GeoH 2 ) is emerging as a viable clean energy source. It is largely produced through serpentinization, a geological process in which ultramafic rocks react with water under suitable temperature and pressure. Here, this review synthesizes the current understanding of H 2 generation by serpentinization, with an emphasis on reaction mechanisms, kinetics, and thermodynamics, as well as on modeling flow and transport of reacting fluids in geological formations. We describe the role of mineral assemblages, such as olivine and pyroxene, fluid-rock interactions, and catalytic surfaces, in influencing GeoH 2 yield and reaction rates. By integrating models of reaction kinetics, subsurface reactive flow and transport, and the serpentinization process, and by accounting for the thermodynamic state of the system, this review aims to guide future GeoH 2 research and to evaluate the potential of natural hydrogen as a sustainable clean energy source.

Moradi, Rasoul [Univ. of Southern California, Los ↗
DOE OSTI2025

Geologic hydrogen: From natural occurrences to anthropogenic generation – A review of fundamentals, potential, challenges and prospects

Growing demand for hydrogen is exposing the environmental and economic limits of reforming-based and carbon-managed supply chains, while the scale-up of electrolytic capacity remains capital-constrained. Geologic hydrogen, defined as molecular H₂ generated and stored within the Earth's crust offers a complementary, potentially lower-cost resource, yet exploration is still ad hoc. This review (1) revisits a global inventory of confirmed hydrogen seeps and subsurface occurrences; (2) analyzes the controlling reactions, migration pathways, and trapping conditions governing these occurrences; (3) proposes a process-based geologic hydrogen system concept analogous to, yet distinct from, the petroleum system; and (4) evaluates potential geologic hydrogen systems within the United States as a representative case study. Here, we contrast natural systems powered by serpentinization, mantle degassing or radiolysis with anthropogenic systems that stimulate the same reactions or convert in-situ hydrocarbons. Stable hydrogen accumulations require generation rates that outpace combined physical, chemical and microbial losses; the Bourakébougou field (Mali) exemplifies a self-recharging, free-gas reservoir sustained by meteoric-water serpentinization beneath an efficient caprock. Prospective geologic hydrogen resources are likely to occur in regions where iron-rich lithologies, deep-seated faults, and low-permeability sealing formations coexist. Applying this principle, we highlight three promising hydrogen play types in U.S. geological terrains: ophiolite belts (Appalachian and Californian regions), the Midcontinent Rift and the Lake Superior banded‑iron formations. Multiphysics numerical models and positive-unlabeled machine-learning workflows help to accelerate play screening and de-risk future production; yet, reaction kinetics, stimulation strategies, and full techno-economic and life-cycle assessments remain pivotal knowledge gaps.

Anthropogenic hydrogen generation↗
DOE OSTI2025

Exploring microstructures and anisotropies of serpentinites

Serpentine minerals have received a lot of attention because of their unique crystal structures, their wide occurrence in orogenic belts and their potential role in contributing seismic anisotropy in subducting slabs. Several studies have investigated crystal preferred orientation (CPO) in high temperature antigorite serpentinites from Japan, the Alps, Spain, Cuba and Tibet, documenting significant crystal alignment. However, only a limited number of lower grade serpentines have been explored to date. Mainly because of submicroscopic microstructural heterogeneities CPO cannot be measured with conventional methods such as optical microscopy and EBSD. In this study 15 serpentinites from different tectonic settings in California, the Central Alps and Northern Spain have been investigated, mainly with high energy synchrotron X-ray diffraction, to quantify bulk crystal alignment. We find that CPO is strong on sheared surfaces of fractured blocks and secondary veins but the bulk of most serpentinite samples, except high-grade recrystallized antigorite serpentinite, show only weak crystal alignment. Correspondingly calculated seismic anisotropy based on CPO is not very significant. This is supported by very heterogeneous microstructures as documented with SEM and TEM analyses.

58 GEOSCIENCES↗
DOE OSTI2025

On the viability of stimulated hydrogen generation from iron-rich formations

Hydrogen-based technologies present a promising solution for the global energy transition. In addition to electrolytic production, subsurface geological formations provide a potential natural source of hydrogen. Iron-rich ultramafic rocks, in particular, are favorable for hydrogen generation through natural processes such as serpentinization. Naturally occurring reactions and migration can be enhanced through various types of stimulation, including thermal, hydraulic, and chemical treatment. Through numerical simulations, we analyzed the complex interplay of factors influencing the production and migration within the subsurface, emphasizing the importance of different stimulation techniques, catalysts, and conditions. Our findings indicate that key parameters, such as damage zone permeability and width, significantly impact producible hydrogen mass. Our results indicate that a combination of large damage zone widths, high permeability, and a stimulated reaction rate of 1 × 10 -9 can yield economically viable production rates of up to 1 kg s -1 at the wellhead. Moreover, the availability of ferrous iron, rather than the serpentinization rate itself, has been identified as the primary limiting factor in achieving economically sustainable hydrogen production. In conclusion, while an unstimulated rock volume of 0.165 km 3 yields only 45t of hydrogen in two years, various stimulation techniques can increase production to 18500t.

08 - HYDROGEN↗