Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Serpentinization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

The Valence of Iron in CM Chondrite Serpentine as Measured by Synchrotron Xanes

Fe-bearing phyllosilicates are the dominant product of aqueous alteration in carbonaceous chondrites, and serpentine is the most abundant phyllosilicate in CM2 chondrites that are the most abundant carbonaceous chondrite. Browning et al. predicted that Fe(3+)/(sum of Fe) ratios of serpentine in CM chondrites should change with progressive alteration. They proposed that progressive CM alteration is best monitored by evaluating the progress of Si and Fe3+ substitutions that necessarily attend the transition from end-member cronstedtite to serpentine. Their proposed Mineralogic Alteration Index, 2-(Fe(3+)/(2-Si)), was intended to highlight and utilize the relevant ex-change information in the stoichiometric phyllosilicate formulas based upon the coupled substitution of 2(Fe(3+), Al) = Si + (Mg, Fe(2+)...) in serpentine. The value of this ratio increases as alteration proceeds. We always wanted to directly test Browning s pre-diction through actual measurements of the Fe3+ con-tent of serpentine at the micron scale appropriate to EPMA analyses (Zega et al. have measured it at much finer scale), and this test can now be made using Synchrotron Radiation X-ray Absorption Near-Edge Structure (SR-XANES). Thus, we have recently begun investigation with CMs that span a large portion of the range of observed aqueous alteration, and we first analyzed Murray, Nogoya, and ALH84029 by SR-XANES. However, we did not find clear correlation between Fe3+/(sum of Fe) ratios of serpentine and their alteration degrees. We thus analyzed serpentine in three more CMs and here report their Fe3+/(sum of Fe) ratios in comparison with our previous results.

Mikouchi, T.↗
NASA NTRS2012

Relationship Between Iron Valence States of Serpentine in CM Chondrites and Their Aqueous Alteration Degrees

The 0.6-0.7 micron absorption band observed for C-type asteroids is caused by the presence of Fe(3+) in phyllosilicates . Because Fe-bearing phyllosilicates, especially serpentine, are the most dominant product of aqueous alteration in the most abundant carbonaceous chondrites, CM chondrites, it is important to understand the crystal chemistry of serpentine in CM chondrites to better understand spectral features of C-type asteroids. CM chondrites show variable degrees of aqueous alteration, which should be related to iron valences in serpentine. It is predicted that the Fe(3+)/Sum of (Fe) ratios of serpentine in CM chondrites decrease as alteration proceeds by Si and Fe(3+) substitutions from end-member cronstedtite to serpentine, which should be apparent in the absorption intensity of the 0.6-0.7 micron band from C-type asteroids. In fact, the JAXA Hayabusa 2 target (C-type asteroid: 1993 JU3) exhibits heterogeneous spectral features (0.7 micron absorption band disappears by rotation). From these points of view, we have analyzed iron valences of matrix serpentine in several CM chondrites which span the entire observed range of aqueous alteration using Synchrotron Radiation X-ray Absorption Near-Edge Structure (SR-XANES). In this abstract we discuss the relationship between obtained Fe(3+)/Sum of (Fe) ratios and alteration degrees by adding new data to our previous studies

Mikouchi, T.↗
DOE OSTI2024

Geochemical-hydromechanical couplings during water-serpentinized harzburgite interactions at 20° C and 30 bars

Interaction of groundwater with the serpentinized harzburgites of the upper mantle plays an important role in the geologic carbon cycle and serpentinization processes. Here, in this study, an intact serpentinized harzburgite with more than 60% lizardite from the Semail ophiolite in Oman was reacted with water at near neutral pH and low PCO 2 to observe its dissolution behavior and reaction path within the CaO-MgO-SiO 2 -CO 2 -H 2 O system at 20 °C and 30 bars. In the experiment, mass (i.e. H 2 O, ions) transfer is by diffusion and the selected temperature and pressure conditions mimic water-rock interactions at the shallow portions of most ultramafic rock hosted aquifers. Equilibrium activity-activity diagrams and thermodynamic data were used to compare the experimentally determined reaction path with the theoretical stability boundaries for minerals involved to investigate the evolution of bulk chemical composition, mineralogy, and water composition. The experiments demonstrated that (i) the water-rock interactions increased the pH of the aqueous phase from 5.9 to 7.5 over a period of 18 weeks; (ii) the dissolution of lizardite, orthopyroxene (enstatite), and clinopyroxene (diopside and augite) increased the concentration of Mg, Ca, and Si in the aqueous phase; (iii) the dissolution was incongruent with respect to Mg and Si, favoring Si release at pH > 6 due to (a) breaking of more reactive cation‑oxygen bonds that is consistent with the stoichiometry of magnesium for proton exchange reaction which favors a surface that is enriched in Mg at basic conditions, and (b) preferential dissolution of clinopyroxene Mg 1.30 Ca 0.52 Fe 0.06 Si 2 O 6 ; (iv) the aqueous phase was undersaturated with respect to carbonate (e.g. calcite, magnesite, and hydromagnesite) and hydrous (e.g. lizardite, chrysotile, brucite, and talc) minerals; (v) the bulk chemical composition and mineralogy of the intact serpentinized harzburgite matrix did not change; (vi) the thermodynamic data can successfully predict water-intact serpentinized harzburgite behavior if the water chemical composition can be constrained; and (vii) no detectable macroscopic form of damage (e.g. microcracks forming as a result of differential stress fields due to changes in volume during chemical reaction) was observed.

Carbonation↗
DOE OSTI2025

Reactive Transport Modeling of Hydrogen Production from Serpentinization of Olivine

Hydrogen production from serpentinization of ultramafic rocks represents a promising natural pathway for generating carbon-free energy, yet its kinetics and controlling factors remain incompletely understood. A key challenge in advancing serpentinization research lies in the heterogeneity of porosity and permeability in rocks, which leads to nonuniform fluid velocity fields, as well as uncertainties in estimating reactive surface area and identifying appropriate mineral reaction equilibria. Additional complexities arise from the role of dissolved SiO 2 , Fe 2+ /Fe 3+ partitioning, and the limited effect of pH variations within the strongly alkaline regime on hydrogen yields. These challenges hinder straightforward extrapolation from laboratory tests to practical applications of hydrogen production from natural rocks. Here, in this work, we address these questions using a simulation-based reactive transport modeling framework calibrated against controlled laboratory experiments reported elsewhere. The model couples geochemical kinetics, multiphase flow, and mineralogical feedbacks, enabling systematic evaluation of how surface area, dissolved silica concentration, Fe redox state, temperature, and pressure govern serpentinization and H2 generation. We find that surface area exerts the strongest control on reaction rates and hydrogen yields, while Fe 2+ /Fe 3+ ratios act as secondary modulators. Elevated dissolved silica concentrations suppress hydrogen production but accelerate serpentine precipitation, whereas increasing pH beyond 12 within the strongly alkaline regime produces only marginal gains. Finally, we demonstrate that integrating targeted experiments with calibrated simulations offers a powerful and efficient approach for predicting hydrogen yields and assessing parameter trade-offs in industrial-scale applications. This integration can substantially reduce the experimental burden while improving predictive capability, thereby enhancing both the mechanistic understanding and the practical feasibility of hydrogen production from serpentinization.

08 HYDROGEN↗
NASA NTRS1991

Shock wave equation of state of serpentine to 150 GPa - Implications for the occurrence of water in the earth's lower mantle

The shock wave equation of state of Mg end-member serpentine was determined to 150 GPa by examining the shock properties of three polycrystalline serpentines: (1) a lizardite serpentine found near Globe (Arizona), (2) an antigorite serpentine from Thurman (New York), and (3) a chrysotile serpentine from Quebec (Canada). The shock wave experiments were carried out using either a two-stage light gas gun or a 40-mm bore propellant. The shock equation of state that was obtained is shown to exhibit four distinct regions: a low-pressure phase, a mixed phase region, a high-pressure phase, and a very high-pressure phase. The high-pressure density and sound speed of an H2O-rich magnesium silicate determined from these experiments indicate that the observed seismic properties of the lower mantle allow the existence of several weight percent of water in the lower mantle.

Tyburczy, James A.↗
NASA NTRS2016

Biological Potential in Serpentinizing Systems

Generation of the microbial substrate hydrogen during serpentinization, the aqueous alteration of ultramafic rocks, has focused interest on the potential of serpentinizing systems to support biological communities or even the origin of life. However the process also generates considerable alkalinity, a challenge to life, and both pH and hydrogen concentrations vary widely across natural systems as a result of different host rock and fluid composition and differing physical and hydrogeologic conditions. Biological potential is expected to vary in concert. We examined the impact of such variability on the bioenergetics of an example metabolism, methanogenesis, using a cell-scale reactive transport model to compare rates of metabolic energy generation as a function of physicochemical environment. Potential rates vary over more than 5 orders of magnitude, including bioenergetically non-viable conditions, across the range of naturally occurring conditions. In parallel, we assayed rates of hydrogen metabolism in wells associated with the actively serpentinizing Coast Range Ophiolite, which includes conditions more alkaline and considerably less reducing than is typical of serpentinizing systems. Hydrogen metabolism is observed at pH approaching 12 but, consistent with the model predictions, biological methanogenesis is not observed.

the potential of serpentinizing systems to support↗
DOE OSTI2025

Hydrogen Generation and Serpentinization of Olivine Under Flow Conditions

Serpentinization of olivine is often studied in the laboratory under batch conditions. Olivine conversion in situ with enhanced natural hydrogen production will likely be implemented via injection of aqueous solutions. Hence, transport is relevant to the extent of olivine reaction and, potentially, the morphology of precipitates formed. To test conditions for optimal H 2 generation and outcomes, serpentinization was induced by injecting pH = 12.5 brine at 0.015 cm 3 /min (0.5 pore volumes per day) into an olivine sand pack (250 to <355 μm grain size) at 245°C generating, at minimum 76 and 89 mol% H 2 at 35 and 57 d, respectively. Grain-coating serpentine with radiating needles cemented the reacted sand grains. Importantly, pore space was maintained between the dissolving grains and the serpentine precipitates. Hence, reactivity continued as a result of fluid access to mineral surfaces, the large grain size, and the continuous injection of undersaturated alkaline fluids.

08 HYDROGEN↗
NASA NTRS1982

Impact induced dehydration of serpentine and the evolution of planetary atmospheres

Results of shock recovery experiments carried out on antigorite serpentine Mg3Si2O5(OH)4 are reported. The main objective of the present study is the determination of critical shock pressures for partial and complete dehydration of serpentine under shock loading. It is pointed out that serpentine and serpentine-like layer silicates are the major water-bearing phases in carbonaceous chondrites. It appears that these minerals, and a poorly defined cometary contribution, were the most likely water-bearing phases in accreting planetesimals which led to the formation of the terrestrial planets. The obtained results imply that the process of impact induced devolatilization of volatile bearing minerals during accretion is likely to have occurred on earth. The findings lend support to the model of a terrestrial atmosphere/hydrosphere forming during the later stages of accretion of the earth.

Lange, M. A.↗
NASA NTRS2005

Polyhedral Serpentine Grains in CM Chondrites

CM chondrites are primitive rocks that experienced aqueous alteration in the early solar system. Their matrices and fine-grained rims (FGRs) sustained the effects of alteration, and the minerals within them hold clues to the aqueous reactions. Sheet silicates are an important product of alteration, and those of the serpentine group are abundant in the CM2 chondrites. Here we expand on our previous efforts to characterize the structure and chemistry of serpentines in CM chondrites and report results on a polyhedral form that is structurally similar to polygonal serpentine. Polygonal serpentine consists of tetrahedral (T) sheets joined to M(2+)-centered octahedral (O) sheets (where (M2+) is primarily Mg(2+) and Fe(2+)), which give rise to a 1:1 (TO) layered structure with a 0.7-nm layer periodicity. The structure is similar to chrysotile in that it consists of concentric lizardite layers wrapped around the fiber axis. However, unlike the rolled-up chrysotile, the tetrahedral sheets of the lizardite layers are periodically inverted and kinked, producing sectors. The relative angles between sectors result in 15- and 30-sided polygons in terrestrial samples.

Zega, Thomas J.↗
DOE OSTI2026

Computer simulation of reaction and transport of core-scale serpentinization of Fe-bearing olivine and evolution of geological hydrogen

We present reactive flow and transport simulations of core-scale serpentinization of forsteritic, Fe-bearing olivine under hydrothermal conditions. The model captures fluid flow, evolving porosity–permeability, and redox-controlled H 2 production in a cylindrical core over 55 days at 245 °C and 37 bar. Key processes include olivine dissolution, precipitation of serpentine and magnetite, and oxidation of Fe2+ to Fe 3+ . Here, results show strong coupling among flow velocity, alteration front propagation, and spatially heterogeneous H 2 generation. Elevated H2 concentrations align with inlet-localized magnetite precipitation, consistent with experiments. Secondary mineral formation reduces porosity and permeability, altering transport pathways. Reactive flow at the fluid–solid interface governs H 2 generation rates and distribution. Dissolved SiO2 promotes serpentine and talc formation by suppressing brucite, while bicarbonate extends reaction duration and moderates surface complexation effects.

Geologic hydrogen↗
DOE OSTI2026

Chromium-for-Aluminum Substitution in Synthetic Serpentine

Cr-bearing clay minerals are products of hydrothermal alteration and fluid–rock interactions of ultramafic rocks that form serpentine minerals. Cr is typically observed to substitute for Al in serpentine minerals, but the crystal chemistry and environmental constraints on this substitution are unknown. Here, we synthesized endmember and Cr-substituted amesite, a typical Al-serpentine mineral, via the hydrothermal method. We found that the phase purity highly depends on the pH of the hydrothermal solution, which should be controlled at ~12.7 to avoid the formation of impurity phases. Additionally, amesite can incorporate Cr at a concentration equivalent to ~39.5% substitution of Al. The Cr-free and Cr-substituted amesite are highly defective and contain multiple polytypes, including 6R 2 , 2M 1 , and possibly 2H 2 . However, the relative proportions of these polytypes do not change with increasing chromium substitution.

Al-lizardite↗
NASA NTRS1994

Control of a Serpentine Robot for Inspection Tasks

This paper presents a simple and robust kinematic control scheme for the JPL serpentine robot system. The proposed strategy is developed using the dampened-least-squares/configuration control methodology, and permits the considerable dexterity of the JPL serpentine robot to be effectively utilized for maneuvering in the congested and uncertain workspaces often encountered in inspection tasks. Computer simulation results are given for the 20 degree-of-freedom (DOF) manipulator system obtained by mounting the twelve DOF serpentine robot at the end-effector of an eight DOF Robotics Research arm/lathe-bed system. These simulations demonstrate that the proposed approach provides an effective method of controlling this complex system.

robotics simulations kinematic control serpentine ↗
DOE OSTI2025

Serpentine Magnet Designs for the Interaction Region of the Electron-Ion Collider (EIC)

The Electron-Ion Collider (EIC), hosted by Brookhaven National Laboratory, is designed to deliver a peak luminosity of 1 × 10 34 cm −2 sec −1 . The interaction region (IR) of the EIC imposes several constraints in terms of field quality, aperture, and spatial layout, which necessitates the development of several unique superconducting serpentine direct wind magnets. These magnets are constructed using either a single strand or a small-diameter 6-around-1 NbTi cable, presenting unique challenges for design and optimization. This paper introduces a new computational code specifically developed to streamline and integrate the design process for these magnets, enabling faster design iterations while addressing their complex requirements. Here, in this paper, we first introduce the code, which builds on established electromagnetic fundamentals. The code incorporates tools for optimizing winding patterns and for correcting magnetic multipoles; additionally, it interfaces with established magnet design software. We also present the design of several serpentine magnets for the EIC IR, demonstrating the code’s capability to deliver precise and efficient solutions. These designs highlight the code’s ability to accelerate the development cycle, ensuring the serpentine magnets meet the demanding specifications of the EIC project.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1979

Infrared spectra of the Orgueil /C-1/ chondrite and serpentine minerals

Infrared spectroscopy of the Orgueil C-1 chondrite and polymorphs of serpentine was performed in order to further define the mineralogy of Orgueil. Spectra of the meteorite and a synthetic serpentine (Mg3(Si2O5)(OH)4) were obtained in the regions from 1400 to 200 and from 4000 to 2500 kayers using a double beam infrared spectrometer. The spectra of Orgueil are found to be incompatible with those of the chrysotile, antigorite and lizardite polymorphs of serpentine, indicating a very low abundance of these minerals in the meteorite. It is suggested that chamosite or minerals related to chamosites may prove to be compatible with the compositional, structural and infrared properties of Orgueil.

Zaikowski, A.↗
NASA NTRS1980

Experimental application of LANDSAT to geobotanical prospecting of serpentine outcrops in the central Appalachian Piedmont of North America

The use of LANDSAT as a tool for geobotanical prospecting was studied in a 13,137 sq km area from southeastern Pennsylvania to northern Virginia. Vegetation differences between known serpentine and non-sepentine sites were most easily distinguished on early summer images. A multispectral signature was derived from vegetation of two known serpentine sites and a map was produced of 159 similar signatures of vegetation in the study area. Authenticity of the serpentine nature of the mapped sites was checked via geochemical analysis of collected soils from 14% of the sites. Overall success of geobotanical prospecting was about 35% for the total study area. When vegetation distribution was taken into account, the success rate was 67% for the region north of the Potomac, demonstrates the effectiveness of the multispectral satellite for quickly and accurately locating mineral sensitive vegetation communities over vast tracts of land.

Mielke, H. W.↗
NASA NTRS1982

Geobotanical techniques for discriminating serpentine rock types in Western United States

The effectiveness of airborne multispectral imagery for identifying vegetation indicative of serpentine soils, which usually contain deposits of Ni, Cr, and Co, was examined with ground truth data. Analyses were carried out in SW Oregon, the Jasper Ridge of the Santa Cruz Mountains, and the Sierra Nevada foothills. Airborne studies were performed with 10-channel scanner, a IR scanner, and with false color composites, while ground studies classified the vegetation and mineral contents of the soil. The airborne studies were successfully used to discern serpentine soils from nonultramafic rock types, although difficulties were encountered in separating serpentine from nonserpentinized peridotite. A lack of deciduous trees on serpentized land was noted.

Mouat, D.↗
NASA NTRS1988

Dehydration kinetics of shocked serpentine

Experimental rates of dehydration of shocked and unshocked serpentine were determined using a differential scanning calorimetric technique. Dehydration rates in shocked serpentine are enhanced by orders of magnitude over corresponding rates in unshocked material, even though the impact experiments were carried out under conditions that inhibited direct impact-induced devolatilization. Extrapolation to temperatures of the Martian surface indicates that dehydration of shocked material would occur 20 to 30 orders of magnitude more rapidly than for unshocked serpentine. The results indicate that impacted planetary surfaces and associated atmospheres would reach chemical equilibrium much more quickly than calculations based on unshocked material would indicate, even during the earliest, coldest stages of accretion. Furthermore, it is suggested that chemical weathering of shocked planetary surfaces by solid-gas reactions would be sufficiently rapid that true equilibrium mineral assemblages should form.

Tyburczy, James A.↗
NASA NTRS1993

Heat transfer in rotating serpentine passages with selected model orientation for smooth or skewed trip walls

Experiments were conducted to determine the effects of model orientation as well as buoyancy and Coriolis forces on heat transfer in turbine blade internal coolant passages. Turbine blades have internal coolant passage surfaces at the leading and trailing edges of the airfoil with surfaces at angles which are as large as +/- 50 to 60 degrees to the axis of rotation. Most of the previously-presented, multiple-passage, rotating heat transfer experiments have focused on radial passages aligned with the axis of rotation. Results from serpentine passages with orientations 0 and 45 degrees to the axis of rotation which simulate the coolant passages for the mid chord and trailing edge regions of the rotating airfoil are compared. The experiments were conducted with rotation in both directions to simulate serpentine coolant passages with the rearward flow of coolant or with the forward flow of coolant. The experiments were conducted for passages with smooth surfaces and with 45 degree trips adjacent to airfoil surfaces for the radial portion of the serpentine passages. At a typical flow condition, the heat transfer on the leading surfaces for flow outward in the first passage with smooth walls was twice as much for the model at 45 degrees compared to the model at 0 degrees. However, the differences for the other passages and with trips were less. In addition, the effects of buoyancy and Coriolis forces on heat transfer in the rotating passage were decreased with the model at 45 degrees, compared to the results at 0 degrees. The heat transfer in the turn regions and immediately downstream of the turns in the second passage with flow inward and in the third passage with flow outward was also a function of model orientation with differences as large as 40 to 50 percent occurring between the model orientations with forward flow and rearward flow of coolant.

Johnson, B. V.↗