Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Se”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Phase equilibria in the quasi-ternary system Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} and physical properties of (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} single crystals

The quasi-ternary system Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} was investigated by differential thermal, X-ray phase, X-ray structure, microstructure analysis and microhardness measurements. Five quasi-binary phase diagrams, six polythermal sections, isothermal section at 820 K and the liquidus surface projection were constructed. The character and temperature of the invariant processes were determined. The specific resistance of the single crystals (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} was measured, 7.5×10{sup 5} and 3.15×10{sup 5} Ω m, respectively, optical absorption spectra in the 600–1050 nm range were recorded at room temperature, and the band gap energy was estimated which is 1.95±0. 01 eV for both samples. - Graphical abstract: The article reports for the first time the investigated liquidus surface projection of the Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system and isothermal section at 820 K of the system. Five phase diagrams, six polythermal sections, isothermal section at 820 K and the liquidus surface projection were built at the first time. The existence of the large region of the solid solutions based on AgIn{sub 5}Se{sub 8}, Ga{sub 2}Se{sub 3} and AgGa{sub 1−x}In{sub x}Se{sub 2} was investigated. The existence of two ternary phases was established in the Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system. Two single crystals (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} were grown and some of optical properties of them were studied at first time. Display Omitted - Highlights: • Liquidus surface projection was built for Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system. • Solid solution ranges of AgIn{sub 5}Se{sub 8}, Ga{sub 2}Se{sub 3} and AgGa{sub 1−x}In{sub x}Se{sub 2} were investigated. • Two single crystals (Ga{sub 0.6}In{sub 0.4}){sub 2}Se{sub 3}, (Ga{sub 0.594}In{sub 0.396}Er{sub 0.01}){sub 2}Se{sub 3} were grown. • Some optical properties of these single crystals were studied.

36 MATERIALS SCIENCE↗

Isothermal sections of the quasi-ternary systems Ag{sub 2}S(Se)–Ga{sub 2}S(Se){sub 3}–In{sub 2}S(Se){sub 3} at 820 K and the physical properties of the ternary phases Ga{sub 5.5}In{sub 4.5}S{sub 15}, Ga{sub 6}In{sub 4}Se{sub 15} and Ga{sub 5.5}In{sub 4.5}S{sub 15}:Er{sup 3+}, Ga{sub 6}In{sub 4}Se{sub 15}:Er{sup 3+}

Isothermal sections of the quasi-ternary systems Ag{sub 2}S(Se)–Ga{sub 2}S(Se){sub 3}–In{sub 2}S(Se){sub 3} at 820 K were compared. Along the 50 mol% Ag{sub 2}S(Se), both systems feature continuous solid solutions with the chalcopyrite structure. Along the 17 mol% Ag{sub 2}S(Se), the interactions at the AgIn{sub 5}S(Se){sub 8}–'AgGa{sub 5}S(Se){sub 8}' sections are different. In the Ag{sub 2}S–Ga{sub 2}S{sub 3}–In{sub 2}S{sub 3} system the existence of the layered phase AgGa{sub x}In{sub 5–x}S{sub 8}, 2.25≤x≤2.85, was confirmed (S.G. P6{sub 3}mc). The Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system features the formation of solid solution (up to 53 mol% Ga{sub 2}Se{sub 3}) based on AgIn{sub 5}Se{sub 8} (S.G. P-42m). Crystal structure, atomic coordinates were determined by powder diffraction method for samples from the homogeneity region of AgIn{sub 5}Se{sub 8}. Specific conductivities of the crystals Ga{sub 6}In{sub 4}Se{sub 15} (1.33·10{sup −6} Ω{sup −1} m{sup −1}), Ga{sub 5.94}In{sub 3.96}Er{sub 0.1}Se{sub 15} (3.17·10{sup −6} Ω{sup −1} m{sup −1}), Ga{sub 5.5}In{sub 4.5}S{sub 15} (7.94·10{sup −6} Ω{sup −1} m{sup −1}), Ga{sub 5.46}In{sub 4.47}Er{sub 0.07}S{sub 15} (1·10{sup −9} Ω{sup −1} m{sup −1}) were measured at room temperature. Optical absorption and photoconductivity spectra were recorded in the range 400–760 nm. The introduction of erbium leads to an increase in the absorption coefficient and to the appearance of absorption bands at 530, 660, 810, 980, 1530 nm. - Highlights: • Nature of solid solutions in Ag{sub 2}S(Se)–Ga{sub 2}S(Se){sub 3}–In{sub 2}S(Se){sub 3} (820 K) were discussed. • Crystal structures of ternary and quaternary compounds were discussed. • Specific conductivity, optical properties of four single crystals were measured. • Photoconductivity of the Ga{sub 5.5}In{sub 4.5}S{sub 15} in the range 400–760 nm were recorded.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Diagram of KxFe2-ySe2-zSz and the Suppression of its Superconducting State by an Fe2-Se/S Tetrahedron Distortion

We report structurally tuned superconductivity in a K{sub x}Fe{sub 2-y}Se{sub 2-z}S{sub z} (0 {le} z {le} 2) phase diagram. Superconducting T{sub c} is suppressed as S is incorporated into the lattice, eventually vanishing at 80% of S. The magnetic and conductivity properties can be related to stoichiometry on a poorly occupied Fe1 site and the local environment of a nearly fully occupied Fe2 site. The decreasing T{sub c} coincides with the increasing Fe1 occupancy and the overall increase in Fe stoichiometry from z = 0 to z = 2. Our results indicate that the irregularity of the Fe2-Se/S tetrahedron is an important controlling parameter that can be used to tune the ground state in the new superconductor family.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural investigation of the Cu{sub 2}Se-In{sub 2}Se{sub 3}-Ga{sub 2}Se{sub 3} phase diagram, X-ray photoemission and optical properties of the Cu{sub 1-z}(In{sub 0.5}Ga{sub 0.5}){sub 1+z/3}Se{sub 2} compounds

Structures of compounds in the Cu{sub 2}Se-In{sub 2}Se{sub 3}-Ga{sub 2}Se{sub 3} system have been investigated through X-ray diffraction. Single crystal structure studies for the so-called stoichiometric compounds Cu(In,Ga)Se{sub 2} (CIGSe) confirm that the chalcopyrite structure (space group I4-bar 2d) is very flexible and can adapt itself to the substitution of Ga for In. On the other hand a structure modification is evidenced in the Cu{sub 1-z}(In{sub 0.5}Ga{sub 0.5}){sub 1+z/3}Se{sub 2} series when the copper vacancy ratio (z) increases; the chalcopyrite structure turns to a modified-stannite structure (I4-bar 2m) when z{>=}0.26. There is a continuous evolution of the structure from Cu{sub 0.74}(In{sub 0.5}Ga{sub 0.5}){sub 1.09}Se{sub 2} to Cu{sub 0.25}(In{sub 0.5}Ga{sub 0.5}){sub 1.25}Se{sub 2} ((i.e. Cu(In{sub 0.5}Ga{sub 0.5}){sub 5}Se{sub 8}), including Cu{sub 0.4}(In{sub 0.5}Ga{sub 0.5}){sub 1.2}Se{sub 2} (i.e. Cu(In{sub 0.5}Ga{sub 0.5}){sub 3}Se{sub 5}). From this single crystal structural investigation, it is definitively clear that no ordered vacancy compound exists in that series. X-ray photoemission spectroscopy study shows for the first time that the surface of powdered Cu{sub 1-z}(In{sub 0.5}Ga{sub 0.5}){sub 1+z/3}Se{sub 2} compounds (z{ne}0) is more copper-poor than the bulk. The same result has often been observed on CIGSe thin films material for photovoltaic applications. In addition, optical band gaps of these non-stoichiometric compounds increase from 1.2 to 1.4 eV when z varies from 0 to 0.75. - Abstract: Pseudo-ternary diagram in the Cu{sub 2}Se-In{sub 2}Se{sub 3}-Ga{sub 2}Se{sub 3} system showing the composition of all the synthesized compounds. The crystal structure of the compounds corresponding to red circles are presented in this study.

36 MATERIALS SCIENCE↗

Intermixing at the absorber-buffer layer interface in thin-film solar cells: The electronic effects of point defects in Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4} devices

We investigate point defects in the buffer layers CdS and ZnS that may arise from intermixing with Cu(In,Ga)(S,Se){sub 2} (CIGS) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTS) absorber layers in thin-film photovoltaics. Using hybrid functional calculations, we characterize the electrical and optical behavior of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities in the buffer. We find that In and Ga substituted on the cation site act as shallow donors in CdS and tend to enhance the prevailing n-type conductivity at the interface facilitated by Cd incorporation in CIGS, whereas they are deep donors in ZnS and will be less effective dopants. Substitutional In and Ga can favorably form complexes with cation vacancies (A-centers) which may contribute to the “red kink” effect observed in some CIGS-based devices. For CZTS absorbers, we find that Zn and Sn defects substituting on the buffer cation site are electrically inactive in n-type buffers and will not supplement the donor doping at the interface as in CIGS/CdS or ZnS devices. Sn may also preferentially incorporate on the S site as a deep acceptor in n-type ZnS, which suggests possible concerns with absorber-related interfacial compensation in CZTS devices with ZnS-derived buffers. Cu, Na, and K impurities are found to all have the same qualitative behavior, most favorably acting as compensating acceptors when substituting on the cation site. Our results suggest one beneficial role of K and Na incorporation in CIGS or CZTS devices is the partial passivation of vacancy-related centers in CdS and ZnS buffers, rendering them less effective interfacial hole traps and recombination centers.

36 MATERIALS SCIENCE↗

First principles calculations of point defect diffusion in CdS buffer layers: Implications for Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4}-based thin-film photovoltaics

We investigate point defects in CdS buffer layers that may arise from intermixing with Cu(In,Ga)Se{sub 2} (CIGSe) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTSSe) absorber layers in thin-film photovoltaics (PV). Using hybrid functional calculations, we characterize the migration barriers of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities and assess the activation energies necessary for their diffusion into the bulk of the buffer. We find that Cu, In, and Ga are the most mobile defects in CIGS-derived impurities, with diffusion expected to proceed into the buffer via interstitial-hopping and cadmium vacancy-assisted mechanisms at temperatures ∼400 °C. Cu is predicted to strongly favor migration paths within the basal plane of the wurtzite CdS lattice, which may facilitate defect clustering and ultimately the formation of Cu-rich interfacial phases as observed by energy dispersive x-ray spectroscopic elemental maps in real PV devices. Se, Zn, and Sn defects are found to exhibit much larger activation energies and are not expected to diffuse within the CdS bulk at temperatures compatible with typical PV processing temperatures. Lastly, we find that Na interstitials are expected to exhibit slightly lower activation energies than K interstitials despite having a larger migration barrier. Still, we find both alkali species are expected to diffuse via an interstitially mediated mechanism at slightly higher temperatures than enable In, Ga, and Cu diffusion in the bulk. Our results indicate that processing temperatures in excess of ∼400 °C will lead to more interfacial intermixing with CdS buffer layers in CIGSe devices, and less so for CZTSSe absorbers where only Cu is expected to significantly diffuse into the buffer.

36 MATERIALS SCIENCE↗

Sulfur gradient-driven Se diffusion at the CdS/CuIn(S,Se){sub 2} solar cell interface

The diffusion behavior of Se at the CdS/Cu(In,Ga)(S,Se){sub 2} thin film solar cell interface was investigated by x-ray photoelectron spectroscopy and x-ray excited Auger electron spectroscopy. Buffer/absorber structures with S/Se ratios between zero and three at the initial Cu(In,Ga)(S,Se){sub 2} surface were analyzed. Samples from a high-efficiency laboratory process (NREL) as well as from an industrial large-area process (AVANCIS) were investigated. We find selenium diffusion into the CdS buffer layer, the magnitude of which strongly depends on the S content at the absorber surface. The associated modification of the heterojunction partners has significant impact on the electronic structure at the interface.

36 MATERIALS SCIENCE↗

Sr(Ag 1− x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] Tunable Direct Band Gap Semiconductors

Abstract Synthesizing solids in molten fluxes enables the rapid diffusion of soluble species at temperatures lower than in solid‐state reactions, leading to crystal formation of kinetically stable compounds. In this study, we demonstrate the effectiveness of mixed hydroxide and halide fluxes in synthesizing complex Sr/Ag/Se in mixed LiOH/LiCl. We have accessed a series of two‐dimensional Sr(Ag 1− x Li x ) 2 Se 2 layered phases. With increased LiOH/LiCl ratio or reaction temperature, Li partially substituted Ag to form solid solutions of Sr(Ag 1− x Li x ) 2 Se 2 with x up to 0.45. In addition, a new type of intergrowth compound [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] was synthesized upon further reaction of Sr(Ag 1− x Li x ) 2 Se 2 with SrSe. Both Sr(Ag 1− x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] exhibit a direct band gap, which increases with increasing Li substitution ( x ). Therefore, the band gap of Sr(Ag 1− x Li x ) 2 Se 2 can be precisely tuned via fine‐tuning x that is controlled by only the flux ratio and temperature.

Zhou, Xiuquan↗

Sr(Ag 1-x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1-x Li x ) 2 Se 2 ] Tunable Direct Band Gap Semiconductors

Synthesizing solids in molten fluxes enables the rapid diffusion of soluble species at temperatures lower than in solid-state reactions, leading to crystal formation of kinetically stable compounds. Here, in this study, we demonstrate the effectiveness of mixed hydroxide and halide fluxes in synthesizing complex Sr/Ag/Se in mixed LiOH/LiCl. We have accessed a series of two-dimensional Sr(Ag 1-x Li x ) 2 Se 2 layered phases. With increased LiOH/LiCl ratio or reaction temperature, Li partially substituted Ag to form solid solutions of Sr(Ag 1-x Li x ) 2 Se 2 with x up to 0.45. In addition, a new type of intergrowth compound [Sr 3 Se 2 ][(Ag 1-x Li x ) 2 Se 2 ] was synthesized upon further reaction of Sr(Ag 1-x Li x ) 2 Se 2 with SrSe. Both Sr(Ag 1-x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1-x Li x ) 2 Se 2 ] exhibit a direct band gap, which increases with increasing Li substitution (x). Therefore, the band gap of Sr(Ag 1-x Li x ) 2 Se 2 can be precisely tuned via fine-tuning x that is controlled by only the flux ratio and temperature.

2D materials↗

{sup 80}Se({gamma},n){sup 79}Se cross section and s-process branching at {sup 79}Se

Photoneutron cross sections were measured for {sup 80}Se near the neutron separation energy with laser Compton-backscattered {gamma}-ray beams at AIST. Neutron capture rates are evaluated for {sup 79}Se with the photoreaction data as experimental constraints on the El {gamma}-strength function, a key parameter in the Hauser-Feshbach statistical model calculation. Solving the set of differential equations under a single neutron exposure, we analyzed the solar abundance ratio of the weak components of {sup 80}Kr and {sup 82}Kr in terms of the s-process branching at {sup 79}Se. We discuss the region of temperature and neutron density allowed for the weak s-process nucleosynthesis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗