Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SURFACE POTENTIAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

In situ measurement of surface potential developed on MgO thin film surface under ion irradiation using ion scattering spectroscopy

The application of ion scattering spectroscopy (ISS) to the in situ measurement of the surface potential developed on an insulator surface under positive ion irradiation was investigated. The ISS spectra measured for a MgO film of 600 nm thickness on a Si substrate by the irradiation of 950 eV He{sup +} ions revealed that the surface is positively charged by approximately 180 V. For accurate measurement of the surface potential, a correction to take into account the angular deflection of primary ions induced by the high surface potential is required. The dependence of the surface potential on the sample temperature revealed that no charging is induced above 700 deg. C, indicating that accumulated charges can be removed by heating to 700 deg. C. From the measurement of the ion-induced secondary electron yield using a collector electrode located in front of the sample surface, the surface potential and ion-induced secondary electron yield were found to be strongly affected by the experimental setup. Secondary electrons produced by the impact of slow positive secondary ions, the maximum energy of which corresponds to the surface potential, play an important role when the bias voltage applied to the collector electrode is positively high for the present experimental setup. The surface potential developed on the surface of MgO films of 600 and 200 nm thickness was measured in situ, revealing that the amount of accumulated charges and the time required to attain the steady state of charging are slightly dependent on the beam current of primary ions and strongly dependent on the thickness of the MgO film. The present results confirmed that the application of ISS has high potential for investigating charging phenomena and the secondary electron emission from insulator surfaces under positive ion irradiation.

36 MATERIALS SCIENCE↗

Physisorption of an electron in deep surface potentials off a dielectric surface

We study phonon-mediated adsorption and desorption of an electron at dielectric surfaces with deep polarization-induced surface potentials where multiphonon transitions are responsible for electron energy relaxation. Focusing on multiphonon processes due to the nonlinearity of the coupling between the external electron and the acoustic bulk phonon triggering the transitions between surface states, we calculate electron desorption times for graphite, MgO, CaO, Al{sub 2}O{sub 3}, and SiO{sub 2} and electron sticking coefficients for Al{sub 2}O{sub 3}, CaO, and SiO{sub 2}. To reveal the kinetic stages of electron physisorption, we moreover study the time evolution of the image-state occupancy and the energy-resolved desorption flux. Depending on the potential depth and the surface temperature, we identify two generic scenarios: (i) adsorption via trapping in shallow image states followed by relaxation to the lowest image state and desorption from that state via a cascade through the second strongly bound image state in not too deep potentials, and (ii) adsorption via trapping in shallow image states but followed by a relaxation bottleneck retarding the transition to the lowest image state and desorption from that state via a one-step process to the continuum in deep potentials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accelerating ab initio path integral molecular dynamics with multilevel sampling of potential surface

A multilevel approach to sample the potential energy surface in a path integral formalism is proposed. The purpose is to reduce the required number of ab initio evaluations of energy and forces in ab initio path integral molecular dynamics (AI-PIMD) simulation, without compromising the overall accuracy. To validate the method, the internal energy and free energy of an Einstein crystal are calculated and compared with the analytical solutions. As a preliminary application, we assess the performance of the method in a realistic model—the FCC phase of dense atomic hydrogen, in which the calculated result shows that the acceleration rate is about 3 to 4-fold for a two-level implementation, and can be increased up to 10 times if extrapolation is used. With only 16 beads used for the ab initio potential sampling, this method gives a well converged internal energy. The residual error in pressure is just about 3 GPa, whereas it is about 20 GPa for a plain AI-PIMD calculation with the same number of beads. The vibrational free energy of the FCC phase of dense hydrogen at 300 K is also calculated with an AI-PIMD thermodynamic integration method, which gives a result of about 0.51 eV/proton at a density of r{sub s}=0.912.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of surface potential in the V-defect region of MBE Cd{sub x}Hg{sub 1−x}Te film

Atomic-force microscopy is used to investigate the distribution of the contact-potential difference (surface potential) in Cd{sub x}Hg{sub 1−x}Te epitaxial films grown by molecular-beam epitaxy. Modification of the solid-solution composition near the V-defect results in a variation in the contact-potential difference. It is shown that the solid-solution composition varies by ∼0.05 (2.5 at %) towards increasing mercury content in the V-defect region, and a region of mercury depletion by 0.36 at % is observed at the V-defect periphery. From analysis of the surface-potential distribution, it is shown that the Cd{sub x}Hg{sub 1−x}Te epitaxial film contains unform V-defects with a diameter less than 1 μm in addition to macroscopic V-defects.

36 MATERIALS SCIENCE↗

Influence of surface potential on the adhesive force of radioactive gold surfaces

Radioactive particles may acquire surface potential through self-charging, and thus can behave differently from natural aerosols in atmospheric systems with respect to aggregation, deposition, resuspension, and transport to areas surrounding a radioactive source. Here, this work focuses on the adhesive force between radioactive particles and metallic surfaces, which relates to the deposition and resuspension of particles on surrounding surfaces. Scanning surface potential microscopy was employed to measure the surface potential of radioactive gold foil. Atomic force microscopy was used to investigate the adhesive force for gold that acquired surface charge either by irradiation or by application of an equivalent electrical bias. Overall, the adhesive force increases with increasing surface potential or relative humidity. However, a behavior that does not follow the general trend was observed for the irradiated gold at a high decay rate. A comparison between experimental measurements and calculated values revealed that the surface potential promotes adhesion. The contribution of the electrostatic force at high levels of relative humidity was lower than the one found using theoretical calculations due to the effects caused by enhanced adsorption rate of water molecules under a high surface charge density. Lastly, the results of this study can be used to provide a better understanding of the behavior of radioactive particles in atmospheric systems.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Circuit Analysis of Ionizing Surface Potential Measurements of Electrolyte Solutions

Surface potential measurement values of the gas-liquid interface can be ambiguous despite the numerous electrochemical approaches used for quantification of the reported values. Calibration and normalization methods are not standardized, which often undermines the robustness of the reported values. Surface potential instrumentation and data interpretation also varies significantly across literature. Here, we propose a circuit model for an ionizing surface potential method based on the alpha decay of a radioactive americium-241 electrode. We evaluate the robustness of the circuit model for quantifying the surface potential at the air-aqueous interface. We then show successful validation of our circuit model through determination of the surface tension of the air-electrolyte interface with comparison to respective surface tension literature values. This validation reveals the reliability of surface potential measurements using the americium-241 ionizing method. We also report the surface potential difference of the air/water interface to be –0.49 V ± 0.01 V consistent with hydrogens of water pointing toward the air phase.

47 OTHER INSTRUMENTATION↗

Dopant gas effect on silicon chemical vapor depositions: A surface potential model

A surface potential model is proposed to consistently explain the known dopant gas effects on silicon chemical vapor deposition. This model predicts that the effects of the same dopant gases on the diamond deposition rate using methane and carbon tetrachloride should be opposite and similar to those of silane, respectively. Available data are in agreement with this prediction.

Chang, C. A.↗

Scanning Kelvin Probe Force Microscopy and Density Functional Theory Studies on the Surface Potential of the Intermetallics in AA7075-T6 Alloys

The surface potentials of Mg{sub 2}Si and Al{sub 7}Cu{sub 2}Fe intermetallic particles in AA7075-T6 alloys were investigated by scanning Kelvin probe force microscopy (SKPFM) technique. The experimental surface potentials of Mg{sub 2}Si and Al{sub 7}Cu{sub 2}Fe intermetallic particles relative to Al matrix were ranging from − 368 to − 265 mV and 480–500 mV, respectively. A theoretical method for assessing relative nobility of intermetallics in Al alloys was discussed through first principle calculation. The work functions and surface energies of Mg{sub 2}Si and Al{sub 7}Cu{sub 2}Fe surfaces were calculated by using density functional theory (DFT) method. The results showed that work functions and surface energies of Mg{sub 2}Si and Al{sub 7}Cu{sub 2}Fe intermetallics were influenced by the orientations of crystal face and terminal types. At the oxygen coverage of 1/4 ML and 1 ML, the theoretical surface potential differences between Mg{sub 2}Si intermetallics and Al matrix were increased by 10–560 mV and 0–620 mV, while those between Al{sub 7}Cu{sub 2}Fe intermetallics and Al matrix were increased by 62–360 mV and 102–331 mV. For the adsorption of oxygen atom, theoretical surface potentials of Mg{sub 2}Si and Al{sub 7}Cu{sub 2}Fe intermetallics relative to Al matrix had a close agreement with the experimental surface potentials. It was verified that DFT method was a valuable theoretical approach to assess the relative nobility of different phases in alloys.

36 MATERIALS SCIENCE↗

Scanning Surface Potential Microscopy of Spore Adhesion on Surfaces

The adhesion of spores of Bacillus anthracis - the cause of anthrax and a likely biological threat - to solid surfaces is an important consideration in cleanup after an accidental or deliberate release. However, because of safety concerns, directly studying B. anthracis spores with advanced instrumentation is problematic. As a first step, we are examining the electrostatic potential of Bacillus thuringiensis (Bt), which is a closely related species that is often used as a simulant to study B. anthracis. Scanning surface potential microscopy (SSPM), also known as Kelvin probe force microscopy (KPFM), was used to investigate the influence of relative humidity (RH) on the surface electrostatic potential of Bt that had adhered to silica, mica, or gold substrates. AFM/SSPM side-by-side images were obtained separately in air, at various values of RH, after an aqueous droplet with spores was applied on each surface and allowed to dry before measurements. In the SSPM images, a negative potential on the surface of the spores was observed compared with that of the substrates. The surface potential decreased as the humidity increased. Spores were unable to adhere to a surface with an extremely negative potential, such as mica.

59 BASIC BIOLOGICAL SCIENCES↗

Distribution of the surface potential of epitaxial HgCdTe

We studied the distribution of surface potential of the Hg{sub 1−x}Cd{sub x}Te epitaxial films grown by molecular beam epitaxy. The studies showed that the variation of the spatial distribution of surface potential in the region of the V-defect can be related to the variation of the material composition of epitaxial film. The V-defect is characterized by increased of Hg content with respect to the composition of the solid solution of Hg{sub 1−x}Cd{sub x}Te epitaxial film. In this paper, it was demonstrated that the unformed V-defects can be observed together with the macroscopic V-defects on the epitaxial film surface. These unformed V-defects can allow the creation of a complex surface potential distribution profile due to the redistribution of the solid solution composition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A first look at the application of signal extraction techniques to the analysis of body surface potential maps

Partial body surface potential maps from both normal subjects and subjects with independently diagnosed myocardial infarcts are visually compared from superimposed plots. A correlation test is devised to distinguish the two groups, with the reference waveform determined by means of a gradient-search algorithm. The results are encouraging, and suggest further investigation of these techniques as a future diagnostic tool.

Weinstein, S. B.↗

Effect of local surface potential distribution on its relaxation in polycrystalline ferroelectric films.

We have studied the effect of local surface potential distribution on its relaxation in the polycrystalline ferroelectric thin films. A lower surface potential region, i.e., potential pit, is generated near a grain boundary. The deep potential pit has a faster relaxation than the area far away from the potential pit due to the acceleration of the screen charge draining near the grain boundary and the domains formed by applying higher voltage have a faster relaxation due to the larger gradient of screen charge distribution. In addition, the surface potential and its relaxation depend on the sign of applying voltage. The result shows that the surface potential distribution may influence significantly to the reliability of bit signal on the memory devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE EFFECTS OF CRACKING ON THE SURFACE POTENTIAL OF ICY GRAINS IN SATURN’S E-RING: LABORATORY STUDIES

Within Saturn's E-ring, dust grains are coated by water vapor co-released with ice grains from the geyser-like eruptions of Enceladus. These ice-coated grains have intrinsic surface potential and interact synergistically with the ions and electrons of Saturn's magnetospheric plasmas. We perform laboratory experiments to investigate the effects of water-ice growth on the surface potential, using amorphous solid water (ASW) films. We estimate the growth of the surface potential to be ∼ 2.5 mV (Earth) yr{sup 1} and 112 mV yr{sup 1} for E-ring grains at ∼4.5 R {sub s} and 3.95 R {sub s} outside Enceladus’s plume, respectively. In addition, our measurements show that the linear relationship between the surface potential and the film thickness, as described in previous studies, has an upper limit, where the film spontaneously cracks above a porosity-dependent critical thickness. Heating of the cracked films with (and without) deposited charge shows that significant positive (and negative) surface potentials are retained at temperatures above 110 K, contrary to the minimal values (roughly zero) for thin, transparent ASW films. The significant surface potentials observed on micron-scale cracked ice films after thermal cycling, (5–20) V, are consistent with Cassini measurements, which indicate a negative charge of up to 5 V for E-ring dust particles at ∼5 R {sub s}. Therefore, the native grain surface potential resulting from water-vapor coating must be included in modeling studies of interactions between E-ring icy surfaces and Saturn's magnetospheric plasma.

79 ASTRONOMY AND ASTROPHYSICS↗

Surface potential due to charge accumulation during vacuum ultraviolet exposure for high-k and low-k dielectrics

The surface potential due to charge accumulation during vacuum ultraviolet irradiation of high-k and low-k thin dielectric films is measured. Measurement of the substrate current, which is the sum of the charge-accumulation and photoinjection currents, allows an in situ monitoring of the charge accumulation during irradiation. The relationship between the substrate current and the calculated in situ surface potential is also found, eliminating the need for a separate surface-potential measurement. With a high photon dose, the surface potential and substrate current reach a steady-state value with no further net charge accumulation.

36 MATERIALS SCIENCE↗

On the Definition of Surface Potentials for Finite-Difference Operators

For a class of linear constant-coefficient finite-difference operators of the second order, we introduce the concepts similar to those of conventional single- and double-layer potentials for differential operators. The discrete potentials are defined completely independently of any notion related to the approximation of the continuous potentials on the grid. We rather use all approach based on differentiating, and then inverting the differentiation of a function with surface discontinuity of a particular kind, which is the most general way of introducing surface potentials in the theory of distributions. The resulting finite-difference "surface" potentials appear to be solutions of the corresponding continuous potentials. Primarily, this pertains to the possibility of representing a given solution to the homogeneous equation on the domain as a variety of surface potentials, with the density defined on the domain's boundary. At the same time the discrete surface potentials can be interpreted as one specific realization of the generalized potentials of Calderon's type, and consequently, their approximation properties can be studied independently in the framework of the difference potentials method by Ryaben'kii. The motivation for introducing and analyzing the discrete surface potentials was provided by the problems of active shielding and control of sound, in which the aforementioned source terms that drive the potentials are interpreted as the acoustic control sources that cancel out the unwanted noise on a predetermined region of interest.

Tsynkov, S. V.↗

Direct measurement of the plasma screening length and surface potential near the lunar terminator

Direct measurement of the lunar dayside surface potential and screening length has been made by the suprathermal ion detector experiment (Side) near the terminator. In a region 20-30 deg from the terminator at the Apollo 14 and 15 sites the surface potential is found to be approximately 50 V negative, and the screening length to be about 1 km. This value of the screening length is more than 2 orders of magnitude greater than the solar wind 'Debye' length. The strong negative surface potential in this region may be due to enhanced temperature and density of the solar wind plasma.

Benson, J.↗

Self-consistent many-electron theory of electron work functions and surface potential characteristics for selected metals

Electron work functions, surface potentials, and electron number density distributions and electric fields in the surface region of 26 metals were calculated from first principles within the free electron model. Calculation proceeded from an expression of the total energy as a functional of the electron number density, including exchange and correlation energies, as well as a first inhomogeneity term. The self-consistent solution was obtained via a variational procedure. Surface barriers were due principally to many-body effects; dipole barriers were small only for some alkali metals, becoming quite large for the transition metals. Surface energies were inadequately described by this model, which neglects atomistic effects. Reasonable results were obtained for electron work functions and surface potential characteristics, maximum electron densities varying by a factor of over 60.

Smith, J. R.↗