Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRONTIUM 96”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A = 96

Experimental data on ground- and excited-state properties for all known nuclei with mass number A = 96 have been compiled and evaluated. States populated in radioactive decay, as well as in nuclear reactions, have been considered. For these nuclei, level and decay schemes, as well as tables of nuclear properties, are presented. This work supersedes the 1993 evaluation by L.K. Peker (1993Pe02). In summary, three isomers were identified in {sup 96}Ag (2003Ba39,1997Gr02), even though the relative energies were not established. In {sup 96}Ru a nuclear fluorescence experiment (2005Li59) determined the spin, branching ratios and transition strengths of dipole excitations; high-spin level properties were reported by 2000Kh02 and 2002Kl07. High spin levels in {sup 96}Tc were studied in 2001Bu19. For {sup 96}Mo, there are new high-spin data (2000Ch42), as well as low-spin levels produced in (n,n{sup '}{gamma}) (2007Le05) and ({gamma},{gamma}{sup '}) (2004Fr30). High spin data (2005Pa48) were obtained for {sup 96}Zr using heavy-ion induced fission. For {sup 96}Sr, new levels were deduced using alpha-induced (2005Pa48) and spontaneous fission. The decay of a (10-) isomer in {sup 96}Rb was studied by 2005Pi13. Several new mass measurements for neutron rich nuclides have been published, which were used to obtain Q-values and separation energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

(h{sub 11/2},g{sub 7/2}){sub 9{sup -}} neutron excitation in {sup 92,94,96}Sr

Medium-spin structure of neutron rich nuclei {sup 92}Sr, {sup 94}Sr, and {sup 96}Sr have been studied in spontaneous fission of {sup 248}Cm. New spin and parity assignments done in this work differ significantly from those reported in other works. The 9{sup -} excitations, involving the {nu}(g{sub 7/2}h{sub 11/2}){sub 9{sup -}} maximum aligned configuration, were proposed in the three nuclei at 4930.2 keV, 4858.6 keV, and 3523.9 keV, respectively. Shell-model calculations, with the {sup 78}Ni core, support the proposed nature of the 9{sup -} excitations. The new data allow testing the single-particle energies in the region of {sup 78}Ni, and in particular, the position of the {nu}h{sub 11/2} orbital, which was not uniquely determined to date.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SELECTIVE REMOVAL OF STRONTIUM AND CESIUM FROM SIMULATED WASTE SOLUTION WITH TITANATE ION EXCHANGERS IN A FILTER CARTRIDGE CONFIGURATION

This report describes experimental results for the selective removal of strontium and cesium from simulated waste solutions using monosodium titanate (MST) and crystalline silicotitanate (CST)-laden filter cartridges. Four types of ion exchange cartridge media (CST and MST designed by both 3M and POROX{reg_sign}) were evaluated. In these proof-of-principle tests effective uptake of both Sr-85 and Cs-137 was observed. However, the experiments were not performed long enough to determine the saturation levels or breakthrough curve for each filter cartridge. POREX{reg_sign} MST cartridges, which by design were based on co-sintering of the active titanates with polyethylene particles, seem to perform as well as the 3M-designed MST cartridges (impregnated filter membrane design) in the uptake of strontium. At low salt simulant conditions (0.29 M Na{sup +}), the instantaneous decontamination factor (D{sub F}) for Sr-85 with the 3M-design MST cartridge measured 26, representing the removal of 96% of the Sr-85. On the other hand, the Sr-85 instantaneous D{sub F} with the POREX{reg_sign} design MST cartridge measured 40 or 98% removal of the Sr-85. Strontium removal with the 3M-design MST and CST cartridges placed in series filter arrangement produced an instantaneous decontamination factor of 41 or 97.6% removal compared to an instantaneous decontamination factor of 368 or 99.7% removal of the strontium with the POREX{reg_sign} MST and CST cartridge design placed in series. At high salt simulant conditions (5.6 M Na{sup +}), strontium removal with 3M-designed MST cartridge only and with 3M-designed MST and CST cartridges operated in a series configuration were identical. The instantaneous decontamination factor and the strontium removal efficiency, under the above configuration, averaged 8.6 and 88%, respectively. There were no POREX{reg_sign} cartridge experiments using the higher ionic strength simulant solution. At low salt simulant conditions, the uptake of Cs-137 with POREX{reg_sign} CST cartridge out performed the 3M-designed CST cartridges. The POREX{reg_sign} CST cartridge, with a Cs-137 instantaneous decontamination factor of 55 and a Cs-137 removal efficiency of 98% does meet the Cs-137 decontamination goals in the low salt simulant liquor. The Cs-137 removal with 3M-designed CST cartridge produced a decontamination factor of 2 or 49% removal efficiency. The Cs-137 performance graph for the 3M-designed CST cartridge showed an early cessation in the uptake of cesium-137. This behavior was not observed with the POREX{reg_sign} CST cartridges. No Cs-137 uptake tests were performed with the POREX{reg_sign} CST cartridges at high salt simulant conditions. The 3M-designed CST cartridges, with an instantaneous Cs-137 decontamination factor of less than 3 and a Cs-137 removal efficiency of less than 50% failed to meet the Cs-137 decontamination goals in both the low and high salt simulant liquors. This poor performance in the uptake of Cs-137 by the 3M CST cartridges may be attributed to fabrication flaws for the 3M-designed CST cartridges. The reduced number of CST membrane wraps per cartridge during the cartridge design phase, from 3-whole wraps to about 1.5, may have contributed to Cs-137 laden simulant channeling/by-pass which led to the poor performance in terms of Cs-137 sorption characteristics for the 3M designed CST cartridges. The grinding of CST ion exchange materials, to reduce the particle size distribution and thus enhance their easy incorporation into the filter membranes and the co-sintering of MST with polyethylene particles, did not adversely affect the sorption kinetics of both CST and MST in the uptake of Cs-137 and Sr-85, respectively. In general, the POREX{reg_sign} based cartridges showed more resistance to simulant flow through the filter cartridges as evidenced by higher pressure differences across the cartridges. Based on these findings they conclude that incorporating MST and CST sorbents into filter membranes represent a promising method for the semi-continuous removal of radioisotopes of strontium and cesium from waste solutions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

TYPE Ia SUPERNOVAE AS SITES OF THE p-PROCESS: TWO-DIMENSIONAL MODELS COUPLED TO NUCLEOSYNTHESIS

Beyond Fe, there is a class of 35 proton-rich nuclides, between {sup 74}Se and {sup 196}Hg, called p-nuclei. They are bypassed by the s and r neutron capture processes and are typically 10-1000 times less abundant than the s- and/or r-isotopes in the solar system. The bulk of p-isotopes is created in the 'gamma processes' by sequences of photodisintegrations and beta decays in explosive conditions in both core collapse supernovae (SNe II) and in Type Ia supernovae (SNe Ia). SNe II contribute to the production of p-nuclei through explosive neon and oxygen burning. However, the major problem in SN II ejecta is a general underproduction of the light p-nuclei for A < 120. We explore SNe Ia as p-process sites in the framework of a two-dimensional SN Ia delayed detonation model as well as pure deflagration models. The white dwarf precursor is assumed to have reached the Chandrasekhar mass in a binary system by mass accretion from a giant/main-sequence companion. We use enhanced s-seed distributions, with seeds directly obtained from a sequence of thermal pulse instabilities both in the asymptotic giant branch phase and in the accreted material. We apply the tracer-particle method to reconstruct the nucleosynthesis by the thermal histories of Lagrangian particles, passively advected in the hydrodynamic calculations. For each particle, we follow the explosive nucleosynthesis with a detailed nuclear reaction network for all isotopes up to {sup 209}Bi. We select tracers within the typical temperature range for p-process production, (1.5-3.7) x 10{sup 9} K, and analyze in detail their behavior, exploring the influence of different s-process distributions on the p-process nucleosynthesis. In addition, we discuss the sensitivity of p-process production to parameters of the explosion mechanism, taking into account the consequences on Fe and alpha elements. We find that SNe Ia can produce a large amount of p-nuclei, both the light p-nuclei below A = 120 and the heavy-p nuclei, at quite flat average production factors, tightly related to the s-process seed distribution. For the first time, we find a stellar source able to produce both light and heavy p-nuclei almost at the same level as {sup 56}Fe, including the debated neutron magic {sup 92,} {sup 94}Mo and {sup 96,} {sup 98}Ru. We also find that there is an important contribution from the p-process nucleosynthesis to the s-only nuclei {sup 80}Kr, {sup 86}Sr, to the neutron magic {sup 90}Zr, and to the neutron-rich {sup 96}Zr. Finally, we investigate the metallicity effect on p-process production in our models. Starting with different s-process seed distributions for two metallicities Z = 0.02 and Z = 0.001, running two-dimensional SN Ia models with different initial composition, we estimate that SNe Ia can contribute to at least 50% of the solar p-process composition. A more detailed analysis of the role of SNe Ia in Galactic chemical evolution of p-nuclei is in preparation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SELECTIVE REMOVAL OF STRONTIUM AND CESIUM FROM SIMULATED WASTE SOLUTION WITH TITANATE ION-EXCHANGERS IN A FILTER CARTRIDGE CONFIGURATIONS-12092

Experimental results for the selective removal of strontium and cesium from simulated waste solutions with monosodium titanate (MST) and crystalline silicotitanate (CST) laden filter cartridges are presented. In these proof-of-principle tests, effective uptake of both Sr-85 and Cs-137 were observed using ion-exchangers in this filter cartridge configuration. At low salt simulant conditions, the instantaneous decontamination factor (D{sub F}) for Sr-85 with MST impregnated filter membrane cartridges measured 26, representing 96% Sr-85 removal efficiency. On the other hand, the Sr-85 instantaneous D{sub F} with co-sintered active MST cartridges measured 40 or 98% Sr-85 removal efficiency. Strontium-85 removal with the MST impregnated membrane cartridges and CST impregnated membrane cartridges, placed in series arrangement, produced an instantaneous decontamination factor of 41 compared to an instantaneous decontamination factor of 368 for strontium-85 with co-sintered active MST cartridges and co-sintered active CST cartridges placed in series. Overall, polyethylene co-sintered active titanates cartridges performed as well as titanate impregnated filter membrane cartridges in the uptake of strontium. At low ionic strength conditions, there was a significant uptake of Cs-137 with co-sintered CST cartridges. Tests results with CST impregnated membrane cartridges for Cs-137 decontamination are currently being re-evaluated. Based on these preliminary findings we conclude that incorporating MST and CST sorbents into membranes represent a promising method for the semi-continuous removal of radioisotopes of strontium and cesium from nuclear waste solutions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Structure of even-even Sr isotopes with 50 ≤ N ≤ 58 neutrons

Excited levels in Sr 90 , Sr 92 , Sr 94 , and Sr 96 nuclei were reinvestigated using high-statistics multiple- γ coincidence data from neutron-induced fission of U 235 and spontaneous fission of Cf 252 , measured using Exogam at Institut Laue Langevin and Gammasphere arrays, respectively. The experimental goal was the search for new excited levels and firm spin-parity assignments to known levels. A total of 23 new levels with 30 new or corrected decays and 39 new or improved spin-parity assignments were obtained in the four nuclei. Negative-parity structures on top of 3 - excitation were firmly identified and extended to higher spins. New positive-parity structures in Sr 94 and Sr 96 were observed with 3 + excitations characteristic of γ collectivity. The 277.7-keV, E 2 decay from the 1507.0-keV level to the second 0 + level in Sr 96 , found in this paper, completes the coexisting deformed band in this nucleus. To learn about the microscopic structure of levels in the Sr 88 - 96 nuclei, we performed large-scale shell-model calculations. The calculations compared to the experiment, helped the discussion of the evolution of collectivity in strontium isotopes, highlighting the important role of various single-particle excitations in phase transitions and shape coexistence in the region. The special role of the neutron 9 / 2 + [ 404 ] extruder as a catalyst of the deformation change in the region is highlighted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Metallic oxide switches using thick film technology

Metallic oxide thick film switches were processed on alumina substrates using thick film technology. Vanadium pentoxide in powder form was mixed with other oxides e.g., barium, strontium copper and glass frit, ground to a fine powder. Pastes and screen printable inks were made using commercial conductive vehicles and appropriate thinners. Some switching devices were processed by conventional screen printing and firing of the inks and commercial cermet conductor terminals on 96% alumina substrates while others were made by applying small beads or dots of the pastes between platinum wires. Static, and dynamic volt-ampere, and pulse tests indicate that the switching and self-oscillatory characteristics of these devices could make them useful in memory element, oscillator, and automatic control applications.

Patel, D. N.↗

Lifetimes of odd-spin yrast states in {sup 182}Hg

Lifetimes of excited states in {sup 182}Hg were extracted from recoil-gated {gamma}-ray spectra and recoil-gated {gamma}{gamma}-coincidence matrices using the recoil distance Doppler-shift method. States were populated using the {sup 96}Mo({sup 88}Sr,2n){sup 182}Hg fusion-evaporation reaction. Measured lifetimes allowed transition probabilities, transition quadrupole moments, quadrupole deformation parameters, and transition dipole moments to be deduced for the band formed by the odd-spin yrast states. The experimental results confirm the low degree of octupole collectivity in this mass region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Sol-gel synthesis of high-quality SrRuO{sub 3} thin film electrodes suppressing the formation of detrimental RuO{sub 2} and the dielectric properties of integrated lead lanthanum zirconate titanate films.

A facile solution chemistry is demonstrated to fabricate high-quality polycrystalline strontium ruthenium oxide (SrRuO{sub 3}) thin film electrodes on silicon substrates suppressing the formation of undesired ruthenium oxide (RuO{sub 2}) for the deposition of dielectric and ferroelectric materials like lead lanthanum zirconate titanate (PLZT). The robust, highly crystalline SrRuO{sub 3} film fabrication process does not favor the formation of RuO{sub 2} because of molecular level modification of the precursors possessing analogous melting points, yielding homogeneous films. This chemistry is further understood and complemented by kinetic and thermodynamic analysis of the DTA data under nonisothermal conditions, with which the activation energies to form RuO{sub 2} and SrRuO{sub 3} were calculated to be 156 {+-} 17 and 96 {+-} 10 kJ/mol, respectively. The room-temperature resistivity of the SrRuO{sub 3} film was measured to be 850 {+-} 50 {mu}{Omega} cm on silicon (100) substrates. The dielectric properties of sol-gel-derived PLZT thin film capacitors on polycrystalline SrRuO{sub 3} electrodes were also measured to illustrate the high quality of the formed SrRuO{sub 3} bottom electrode. These results have broad implications for the expanded use of these conductive oxide electrodes in many applications that require low thermal budgets. The PLZT (8/52/48) films exhibited well-defined hysteresis loops with remanent polarization of {approx}10.5 {micro}C/cm{sup 2}, dielectric constant of >1450, dielectric loss of <0.06, and leakage current density of {approx}3.8 x 10{sup -8} A/cm{sup 2}. These dielectric properties are similar to those of PLZT on platinized silicon, indicating the high quality of the bottom conductive oxide layer. In addition, the PLZT capacitors were essentially fatigue free for >1 x 10{sup 9} cycles when deposited over an oxide electrode.

36 MATERIALS SCIENCE↗

Molybdenum Isotopes in Presolar Silicon Carbide Grains: Details of s -process Nucleosynthesis in Parent Stars and Implications for r - and p -processes

We have analyzed molybdenum isotopes, together with strontium and barium isotopes, in 18 presolar silicon carbide grains using the Chicago Instrument for Laser Ionization (CHILI), a resonance ionization mass spectrometer. All observed isotope ratios can be explained by mixtures of pure s-process matter with isotopically solar material. Grain residues were subsequently analyzed for carbon, nitrogen, silicon, and sulfur isotopes, as well as a subset for 26 Al– 26 Mg systematics using the NanoSIMS. These analyses showed that all but one grain are mainstream grains, most probably coming from low-mass asymptotic giant branch (AGB) stars. One grain is of the AB type, for which the origin is still a matter of debate. The high precision of molybdenum isotope measurements with CHILI provides the best estimate to date for s -process molybdenum made in low-mass AGB stars. The average molybdenum isotopic abundances produced by the s -process found in the analyzed mainstream SiC grains are 0% 92 Mo, 0.73% 94 Mo, 13.30% 95 Mo, 36.34% 96 Mo, 9.78% 97 Mo, 39.42% 98 Mo, and 0.43% 100 Mo. Solar molybdenum can be explained as a combination of 45.9% s -process, 30.6% r -process, and 23.5% p -process contributions. Moreover, the observed variability in the individual grain data provides insights into the variability of conditions (neutron density, temperature, and timescale) during s -process nucleosynthesis in the grains' parent stars, as they have subtle effects on specific molybdenum isotope ratios. Lastly, the results indicate that the ratio between p - and r -process molybdenum in presolar SiC from many different types of parent stars is Mo p /Mo r = 0.767, the value inferred for the solar system and consistent with what has been found in bulk samples and leachates of primitive meteorites.

79 ASTRONOMY AND ASTROPHYSICS↗

Single Fraction Versus Fractionated Linac-Based Stereotactic Radiotherapy for Vestibular Schwannoma: A Single-Institution Experience

Purpose: To evaluate and compare outcomes for patients with vestibular schwannoma (VS) treated in a single institution with linac-based stereotactic radiosurgery (SRS) or by fractionated stereotactic radiotherapy (SRT). Methods and Materials: One hundred and nineteen patients (SRS = 78, SRT = 41) were treated. For both SRS and SRT, beam shaping is performed by a mini-multileaf collimator. For SRS, a median single dose of 12.5 Gy (range, 11-14 Gy), prescribed to the 80% isodose line encompassing the target, was applied. Of the 42 SRT treatments, 32 treatments consisted of 10 fractions of 3-4 Gy, and 10 patients received 25 sessions of 2 Gy, prescribed to the 100% with the 95% isodose line encompassing the planning target volume. Mean largest tumor diameter was 16.6 mm in the SRS and 24.6 mm in the SRT group. Local tumor control, cranial nerve toxicity, and preservation of useful hearing were recorded. Any new treatment-induced cranial nerve neuropathy was scored as a complication. Results: Median follow-up was 62 months (range, 6-136 months), 5 patients progressed, resulting in an overall 5-year local tumor control of 95%. The overall 5-year facial nerve preservation probability was 88% and facial nerve neuropathy was statistically significantly higher after SRS, after prior surgery, for larger tumors, and in Koos Grade {>=}3. The overall 5-year trigeminal nerve preservation probability was 96%, not significantly influenced by any of the risk factors. The overall 4-year probability of preservation of useful hearing (Gardner-Robertson score 1 or 2) was 68%, not significantly different between SRS or SRT (59% vs. 82%, p = 0.089, log rank). Conclusion: Linac-based RT results in good local control and acceptable clinical outcome in small to medium-sized vestibular schwannomas (VSs). Radiosurgery for large VSs (Koos Grade {>=}3) remains a challenge because of increased facial nerve neuropathy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Nanostructured Crystals of Fluorite Phases Sr{sub 1–x}R{sub x}F{sub 2+x} and Their Ordering: 12. Influence of Structural Ordering on the Fluorine-Ion Conductivity of Sr{sub 0.667}R{sub 0.333}F{sub 2.333} Alloys (R = Tb or Tm) at Their Annealing

The ionic conductivity of Sr{sub 0.667}R{sub 0.333}F{sub 2.333} alloys (rational Sr{sub 2}RF{sub 7} compositions) in SrF{sub 2}–RF{sub 3} systems (R = Tb or Tm), prepared by spontaneous crystallization, has been investigated for the “as-grown” state and after annealing in CF{sub 4} at 900 ± 20°C for 96 h. As-grown samples of both compositions, prepared by fast (200°C/min) melt crystallization, exhibit partial (nonequilibrium) ordering, which increases from Tb to Tm. Annealing of Sr{sub 0.667}R{sub 0.333}F{sub 2.333} alloys yields strong ordering (equilibrium for the annealing temperatures) of the fluorite structure (CaF{sub 2} type, sp. gr. Fm3̅m, Z = 4) at the formation of t-Sr{sub 2}RF{sub 7} tetragonal compound (sp. gr. I4/m, Z = 30). It is established that ordering of the alloy fluorite structure reduces the fluorine-ion conductivity. After the annealing, the conductivity of Sr{sub 0.667}R{sub 0.333}F{sub 2.333} alloys with the initial (nonequilibrium) ordering stage of t-Sr{sub 2}RF{sub 7} phases with almost complete (equilibrium) ordering decreases by a factor of 3–4.5.

36 MATERIALS SCIENCE↗

Nanostructured crystals of fluorite phases Sr{sub 1−x}R{sub x}F{sub 2+x} (R Are Rare Earth Elements) and their ordering: 10. Ordering under spontaneous crystallization and annealing of Sr{sub 1−x}R{sub x}F{sub 2+x} Alloys (R = Tb-Lu, Y) with 23.8–36.1 mol % RF{sub 3}

The products of spontaneous crystallization (at a cooling rate of ∼200 K/min) of Sr{sub 1−x}R{sub x}F{sub 2+x} melts in the homogeneity range of the fluorite phase have been investigated. Thirty-two irrational compositions with 23.8–36.1 mol % RF{sub 3} and eight rational Sr{sub 2}RF{sub 7} compositions are obtained. With respect to the RF{sub 3} content, these compositions form five groups: (1) Sr{sub 0.762}R{sub 0.238}F{sub 2.238} (23.8% RF{sub 3}), (2) Sr{sub 0.744}R{sub 0.256}F{sub 2.256} (25.6%), (3) Sr{sub 0.718}R{sub 0.282}F{sub 2.282} (28.2%), (4) Sr{sub 2}RF{sub 7} (33.3%), and (5) Sr{sub 0.639}R{sub 0.361}F{sub 2.361} (36.1%). R = Tb-Lu, Y for all groups. Quenching melts of group 5 with R = Tb, Dy, and Ho leads to the formation of ordered phases with the trigonal distortion of the rhβ-Na{sub 7}Zr{sub 6}F{sub 31} type, while for melts of group 5 with R = Lu, quenching yields a phase of the trigonal rhα′-Sr{sub 4}Lu{sub 3}F{sub 17} type. In group 5 with R = Y, Er, Tm, or Yb and in groups 1–4 with all REEs, fluorite phases are formed. Annealing at 900 ± 20°C for 96 h with subsequent cooling at a rate of ∼200 K/min expands the variety of ordered phases: a phase with a new r type of orthorhombic distortion is formed in group 1 with R = Lu, in group 2 with R = Tm or Lu, and in group 3 with R = Ho-Lu, Y; a t-Sr{sub 2}RF{sub 7} phase with tetragonal distortion is formed in group 4 with R = Tb-Er, Y; and a phase of trigonal rhα′ type is formed in group 5 with R = Y, Yb, or Lu. A fluorite phase arises in group 1 with R = Tb-Lu, Y as a result of quenching and annealing. The tendency to ordering becomes more pronounced with an increase in the RF{sub 3} content and REE atomic number. The annealing conditions do not provide equilibrium or the completely ordered state of all alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗