Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STOICHIOMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Cation Off-Stoichiometry Leads to High p-Type Conductivity and Enhanced Transparency in Co2ZnO4 and Co2NiO4 Thin Films

We explore the effects of cation off-stoichiometry on structural, electrical, optical, and electronic properties of Co{sub 2}ZnO{sub 4} normal spinel and Co{sub 2}NiO{sub 4} inverse spinel using theoretic and experimental (combinatorial and conventional) techniques, both at thermodynamic equilibrium and in the metastable regime. Theory predicts that nonequilibrium substitution of divalent Zn on nominally trivalent octahedral sites increases net hole density in Co{sub 2}ZnO{sub 4}. Experiment confirms high conductivity and high work function in Co{sub 2}NiO{sub 4} and Zn-rich Co{sub 2}ZnO{sub 4} thin films grown by nonequilibrium physical vapor deposition techniques. High p-type conductivities of Co{sub 2}ZnO{sub 4} (up to 5 S/cm) and Co{sub 2}NiO{sub 4} (up to 204 S/cm) are found over a broad compositional range, they are only weakly sensitive to oxygen partial pressure and quite tolerant to a wide range of processing temperatures. In addition, off-stoichiometry caused by nonequilibrium growth decreases the optical absorption of Co{sub 2}ZnO{sub 4} and Co{sub 2}NiO{sub 4} thin films, although the 500-nm thin films still have rather limited transparency. All these properties as well as high work functions make Co{sub 2}ZnO{sub 4} and Co{sub 2}NiO{sub 4} thin films attractive for technological applications, such as hole transport layers in organic photovoltaic devices or p-type buffer layers in inorganic solar cells.

14 SOLAR ENERGY↗

A Method to determine lysine acetylation stoichiometries

A major bottleneck to fully understanding the functional aspects of lysine acetylation is the lack of stoichiometry information. Here we describe a mass spectrometry method using a combination of isotope labeling and detection of a diagnostic fragment ion to determine the stoichiometry of lysine acetylation on proteins globally. Using this technique, we determined the modification occupancy on hundreds of acetylated peptides from cell lysates and cross-validated the measurements via immunoblotting.

Environmental Molecular Sciences Laboratory↗

In situ examination of oxygen non-stoichiometry in La{sub 0.80}Sr{sub 0.20}CoO{sub 3−δ} thin films at intermediate and low temperatures by x-ray diffraction

Structural evolution of epitaxial La{sub 0.80}Sr{sub 0.20}CoO{sub 3−δ} thin films under chemical and voltage stimuli was examined in situ using X-ray diffraction. The changes in lattice parameter (chemical expansivity) were used to quantify oxygen reduction reaction processes and vacancy concentration changes in lanthanum strontium cobaltite. At 550 °C, the observed lattice parameter reduction at an applied bias of −0.6 V was equivalent to that from the reducing condition of a 2% carbon monoxide atmosphere with an oxygen non-stoichiometry δ of 0.24. At lower temperatures (200 °C), the application of bias reduced the sample much more effectively than a carbon monoxide atmosphere and induced an oxygen non-stoichiometry δ of 0.47. Despite these large changes in oxygen concentration, the epitaxial thin film was completely re-oxidized and no signs of crystallinity loss or film amorphization were observed. This work demonstrates that the effects of oxygen evolution and reduction can be examined with applied bias at low temperatures, extending the ability to probe these processes with in-situ analytical techniques.

36 MATERIALS SCIENCE↗

Stoichiometry optimization of homoepitaxial oxide thin films using x-ray diffraction.

Homoepitaxial SrTiO{sub 3} thin films grown by molecular beam epitaxy are analyzed using high-resolution x-ray diffraction and transmission electron microscopy. Measured 00L x-ray scans from stoichiometric and nonstoichiometric films are compared with calculations that account for the effects of film thickness, lattice parameter, fractional site occupancy, and an offset between film and substrate at the interface. It is found that thickness fringes, commonly observed around Bragg reflections even in stoichiometric homoepitaxial SrTiO{sub 3} films, arise from a film/substrate interface offset. Transmission electron microscopy studies confirm the presence of strain at those homoepitaxial interfaces that show an offset in x-ray diffraction. The consequences for stoichiometry optimization of homoepitaxial films using high-resolution x-ray diffraction and the quality of regrown oxide interfaces are discussed.

36 MATERIALS SCIENCE↗

Superconductivity, magnetism, and stoichiometry of single crystals of Fe[subscript 1+y](Te[subscript 1−x]S[subscript x])[subscript z]

We report synthesis of high-quality Fe{sub 1+y}(Te{sub 1-x}S{sub x}){sub z} single crystals and a comprehensive study of structural, magnetic, and transport properties. We demonstrate the very small upper critical field anisotropy of Fe{sub 1+y}(Te{sub 1-x}S{sub x}){sub z}, {gamma}{sub H} = H{sub c2}{sup {parallel}c}/H{sub c2}{sup {perpendicular}c}. The value of {gamma}{sub H} reaches 1.05 at T = 0.65 T{sub c} for Fe{sub 1.12}Te{sub 0.83}S{sub 0.11} while still maintaining large values of upper critical field. There is high sensitivity to material stoichiometry which includes vacancies on the Te(S) site. Our results reveal competition and coexistence of magnetic order and percolative superconductivity for x {ge} 0.03 while zero resistivity is achieved for x {ge} 0.1.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A determination of the oxygen non-stoichiometry of the oxygen storage material YBaMn{sub 2}O{sub 5+δ}

The A-site ordered double-perovskite oxide, YBaMn{sub 2}O{sub 5+δ}, has been of recent interest for possible application as an oxygen storage material. In the present study, the oxygen non-stoichiometry of YBaMn{sub 2}O{sub 5+δ} has been determined as a function of pO{sub 2} at 650, 700 and 750 °C by Coulometric titration at near-equilibrium conditions. The results confirm that this perovskite oxide has three distinct phases on oxidation/reduction with δ≈0, 0.5 and 1. The stabilities of the YBaMn{sub 2}O{sub 5+δ} phases span a wide range of oxygen partial pressures (∼10{sup −20}≤pO{sub 2}(atm)≤∼1 ) depending on temperature. The phases interconvert at higher pO{sub 2} values at higher temperatures. The partial molar free energies (Δμ{sub O}) corresponding to the oxidation of YBaMn{sub 2}O{sub 5} to YBaMn{sub 2}O{sub 5.5} and of YBaMn{sub 2}O{sub 5.5} to YBaMn{sub 2}O{sub ∼6} were determined. The value of Δμ{sub O} in both oxidation steps becomes less negative with increasing temperature. At some T and pO{sub 2} conditions, YBaMn{sub 2}O{sub 5+δ} is unstable with respect to decomposition to BaMnO{sub 3−δ} and YMnO{sub 3}. This instability is anticipated from the previous studies of the synthesis of YBaMn{sub 2}O{sub 5+δ} but is more apparent in the present experiments which are necessarily slow in order to achieve equilibrium with respect to the oxygen content. - Highlights: • Determination of the oxygen non-stoichiometry of YBaMn{sub 2}O{sub 5+δ} as a function of pO{sub 2} and T. • Establishments of pO{sub 2} ranges of stability of O{sub 5} and O{sub 5.5} at 650 °C, 700 °C and 750 °C. • Discovery of the kinetic instability of YBaMn{sub 2}O{sub 5+δ} with respect to decomposition to BaMnO{sub 3}−{sub x} and YMnO{sub 3}. • Evaluation of the thermodynamics of the oxidation of YBaMnO{sub 5}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stoichiometry control of complex oxides by sequential pulsed-laser deposition from binary-oxide targets

To have precise atomic layer control over interfaces, we examine the growth of complex oxides through the sequential deposition from binary targets by pulsed laser deposition. In situ reflection high-energy electron diffraction (RHEED) is used to control the growth and achieve films with excellent structural quality. The growth from binary oxide targets is fundamentally different from single target growth modes and shows more similarities to shuttered growth by molecular beam epitaxy. The RHEED intensity oscillations of non-stoichiometric growth are consistent with a model of island growth and accumulation of excess material on the surface that can be utilized to determine the correct stoichiometry for growth. Correct monolayer doses can be determined through an envelope frequency in the RHEED intensity oscillations. In order to demonstrate the ability of this growth technique to create complex heterostructures, the artificial n = 2 and 3 Sr n+1 Ti n O 3 n+1 Ruddlesden-Popper phases are grown with good long-range order. Furthermore, this method enables the precise unit-cell level control over the structure of perovskite-type oxides, and thus the growth of complex materials with improved structural quality and electronic functionality.

36 MATERIALS SCIENCE↗

Defects, stoichiometry, and electronic transport in SrTiO{sub 3-δ} epilayers: A high pressure oxygen sputter deposition study

SrTiO{sub 3} is not only of enduring interest due to its unique dielectric, structural, and lattice dynamical properties, but is also the archetypal perovskite oxide semiconductor and a foundational material in oxide heterostructures and electronics. This has naturally focused attention on growth, stoichiometry, and defects in SrTiO{sub 3}, one exciting recent development being such precisely stoichiometric defect-managed thin films that electron mobilities have finally exceeded bulk crystals. This has been achieved only by molecular beam epitaxy, however (and to a somewhat lesser extent pulsed laser deposition (PLD)), and numerous open questions remain. Here, we present a study of the stoichiometry, defects, and structure in SrTiO{sub 3} synthesized by a different method, high pressure oxygen sputtering, relating the results to electronic transport. We find that this form of sputter deposition is also capable of homoepitaxy of precisely stoichiometric SrTiO{sub 3}, but only provided that substrate and target preparation, temperature, pressure, and deposition rate are carefully controlled. Even under these conditions, oxygen-vacancy-doped heteroepitaxial SrTiO{sub 3} films are found to have carrier density, mobility, and conductivity significantly lower than bulk. While surface depletion plays a role, it is argued from particle-induced X-ray emission (PIXE) measurements of trace impurities in commercial sputtering targets that this is also due to deep acceptors such as Fe at 100's of parts-per-million levels. Comparisons of PIXE from SrTiO{sub 3} crystals and polycrystalline targets are shown to be of general interest, with clear implications for sputter and PLD deposition of this important material.

36 MATERIALS SCIENCE↗

Evaluating tantalum oxide stoichiometry and oxidation states for optimal memristor performance

Tantalum oxide has shown promising electrical switching characteristics for memristor devices. Consequently, a number of reports have investigated the electrical behavior of TaO{sub x} thin films. Some effort has been made to characterize the composition of the TaO{sub x} films and it is known that there must be an optimal stoichiometry of TaO{sub x} where forming and switching behavior are optimized. However, many previous reports lack details on the methodology used for identifying the chemistry of the films. X-ray photoelectron spectroscopy has been the most commonly used technique; however, peak fitting routines vary widely among reports and a native surface oxide of Ta{sub 2}O{sub 5} often confounds the analysis. In this report a series of large area TaO{sub x} films were deposited via sputtering with controlled O{sub 2} partial pressures in the sputtering gas, resulting in tunable oxide compositions. Spectra from numerous samples from each wafer spanning a range of oxide stoichiometries were used to develop a highly constrained peak fitting routine. This procedure allowed for the composition of the TaO{sub x} films to be identified with greater detail than elemental ratios alone. Additionally, the peak fitting routine was used to evaluate uniformity of deposition across individual wafers. The appearance of a greater contribution of Ta{sup 4+} oxidation states in the oxygen starved films are believed to relate to films with optimal forming characteristics.

36 MATERIALS SCIENCE↗

The Impacts of Cation Stoichiometry and Substrate Surface Quality on Nucleation, Structure, Defect Formation, and Intermixing in Complex Oxide Heteroepitaxy–LaCrO3 on SrTiO3(001)

Our ability to design and fabricate electronic devices with reproducible properties using complex oxides is critically dependent on our ability to controllably synthesize these materials in thin-film form. Structure-property relationships are intimately tied to film and interface composition. Here we report on the effects of cation stoichiometry in LaCrO3 heteroepitaxial films prepared using molecular beam epitaxy. We show that LaCrO3 films grow pseudomorphically on SrTiO3(001) over an wide range of La-to-Cr atom ratios. However, the growth mode and structural quality are sensitive to the La-to-Cr ratio, with La-rich films being of considerably lower structural quality than Cr-rich films. Cation mixing occurs at the interface for all La-to-Cr ratios investigated, and is not quenched by deposition at ambient temperature. Indiffused La atoms occupy Sr sites in the substrate. The presence of defects in the SrTiO3 substrate is implicated in promoting La indiffusion by comparing the properties of LaCrO3/SrTiO3 with those of LaCrO3/Si, both prepared at ambient temperature. Additionally, pulsed laser deposition is shown to result in more extensive interfacial mixing than molecular beam epitaxy for deposition at ambient temperature on Si.

Environmental Molecular Sciences Laboratory↗

Radiation Tolerant Interfaces: Influence of Local Stoichiometry at the Misfit Dislocation on Radiation Damage Resistance of Metal/Oxide Interfaces

To understand how variations in interface properties such as misfit-dislocation density and local chemistry affect radiation-induced defect absorption and recombination, we have explored a model system of CrxV1-x alloy epitaxial films deposited on MgO single crystals. By controlling film composition, the lattice mismatch with MgO was adjusted so that the misfit-dislocation density varies at the interface. These interfaces were exposed to irradiation and in situ results show that the film with a semi-coherent interface (Cr) withstands irradiation while V film, which has similar semi-coherent interface like Cr, showed the largest damage. Theoretical calculations indicate that, unlike at metal/metal interfaces, the misfit dislocation density does not dominate radiation damage tolerance at metal/oxide interfaces. Rather, the stoichiometry, and the precise location of the misfit-dislocation density relative to the interface, drives defect behavior. Together, these results demonstrate the sensitivity of defect recombination to interfacial chemistry and provide new avenues for engineering radiation-tolerant nanomaterials.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A First–Principles–Based Sub–Lattice Formalism for Predicting Off–Stoichiometry in Materials for Solar Thermochemical Applications: The Example of Ceria

Theoretical models that reliably can predict off-stoichiometry in materials via accurate descriptions of underlying thermodynamics are crucial for energy applications. For example, transition-metal and rare-earth oxides that can tolerate a large number of oxygen vacancies, such as CeO 2 and doped CeO 2 , can split water and carbon dioxide via a two-step, oxide-based solar thermochemical (STC) cycle. The search for new STC materials with a performance superior to that of state-of-the-art CeO 2 can benefit from predictions accurately describing the thermodynamics of oxygen vacancies. The sub-lattice formalism, a common tool used to fit experimental data and build temperature-composition phase diagrams, can be useful in this context. Here, sub-lattice models are derived solely from zero-temperature quantum mechanics calculations to estimate fairly accurate temperature- and oxygen-partial-pressure-dependent off-stoichiometries in CeO 2 and Zr-doped CeO 2 . Physical motivations for deriving some of the “excess” sub-lattice model parameters directly from quantum mechanical calculations, instead of fitting to minimize deviations from experimental and/or theoretical data, are identified. As a result, important limitations and approximations of the approach used are specified and extensions to multi-cation oxides are also suggested to help identify novel candidates for water and carbon dioxide splitting and related applications.

08 HYDROGEN↗