Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STEP requirements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

SITCOMTN-161: PSF assessment in the field of Abell 360 and shapeHSM shear profile using LSSTComCam data

The Rubin LSSTComCam on-sky campaign performed at the end of 2024 provided observations of the Abell 360 galaxy cluster; these data allow a preliminary study of cluster weak lensing analysis using Rubin Data Preview 1 (DP1) data. Among all the steps required for such analyses, accurate modeling of the PSF is essential. This work uses several diagnostics, mostly based on the residuals between the second moments of stars and the PSF model, to characterize the accuracy of the PSF modeling in the A360 field. We find the level of the residuals to be sufficiently low not to hinder the measurement of the tangential shear profile around A360. With a simple source selection process, we demonstrate that outputs of the LSST Science Pipelines can be used to detect the tangential shear profile in Abell 360 at the 3.6σ level, and our analysis indicates that contamination from PSF modeling systematics is negligible.

Dell'Antonio, Ian [Brown University]↗
DOE OSTI2023

Temporal Subsampling Diminishes Small Spatial Scales in Recurrent Neural Network Emulators of Geophysical Turbulence

The immense computational cost of traditional numerical weather and climate models has sparked the development of machine learning (ML) based emulators. Because ML methods benefit from long records of training data, it is common to use data sets that are temporally subsampled relative to the time steps required for the numerical integration of differential equations. Here, we investigate how this often overlooked processing step affects the quality of an emulator's predictions. We implement two ML architectures from a class of methods called reservoir computing: (a) a form of Nonlinear Vector Autoregression (NVAR), and (b) an Echo State Network (ESN). Despite their simplicity, it is well documented that these architectures excel at predicting low dimensional chaotic dynamics. We are therefore motivated to test these architectures in an idealized setting of predicting high dimensional geophysical turbulence as represented by Surface Quasi-Geostrophic dynamics. In all cases, subsampling the training data consistently leads to an increased bias at small spatial scales that resembles numerical diffusion. Interestingly, the NVAR architecture becomes unstable when the temporal resolution is increased, indicating that the polynomial based interactions are insufficient at capturing the detailed nonlinearities of the turbulent flow. The ESN architecture is found to be more robust, suggesting a benefit to the more expensive but more general structure. Spectral errors are reduced by including a penalty on the kinetic energy density spectrum during training, although the subsampling related errors persist. Future work is warranted to understand how the temporal resolution of training data affects other ML architectures.

58 GEOSCIENCES↗
DOE OSTI2020

Quantum algorithms for disordered physics

We show how a quantum computer may efficiently simulate a disordered Hamiltonian, by incorporating a pseudo-random number generator directly into the time evolution circuit. This technique is applied to quantum simulation of few-body disordered systems in the large volume limit; in particular, Anderson localization. The method requires a number of (error corrected) qubits proportional to the logarithm of the volume of the system, and each time evolution step requires a number of gates polylogarithmic in the volume. We simulate the method to observe the metal-insulator transition on a three-dimensional lattice. Additionally, we demonstrate the algorithm on a one-dimensional lattice, using physical quantum processors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Automated reactor physics analysis framework of High Flux Isotope Reactor low-enriched uranium silicide dispersion fuel designs

The High Flux Isotope Reactor (HFIR) is a versatile research reactor that provides one of the highest steady-state neutron fluxes of any reactor in the world. The HFIR reactor physics team investigated the conversion of the current 93 wt% highly enriched uranium U 3 O 8 -Al dispersion fuel to a 19.75% low-enriched uranium (LEU) U 3 Si 2 -Al dispersion fuel. The team continuously develops a Python module to streamline the analysis steps required for an LEU core design to ensure reproducible and agile design iteration. The Python module automates the data processing between analysis steps and automates the input perturbation for branch calculations and design changes. The automated framework has proven to significantly increase the efficiency and reproducibility of the reactor physics team to design High Flux Isotope Reactor (HFIR) LEU cores and thoroughly analyze performance metrics, safety metrics, and thermal safety margins. Consequently, the team can now respond rapidly to fuel fabrication engineer and thermal-hydraulic-structural analyst requests. Numerous combinations of LEU fuel designs are explored, of which two LEU fuel designs are presented here in this paper: a low density silicide design, and a high-density silicide design. Results show that both designs meet or exceed safety and performance metrics with exception for minor differences caused by the hardened spectrum from LEU.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Renewable Energy Landscapes: Southwest and Pacific Northwest Workshops

To connect landscape architects and the energy sector, the University of Arizona and the University of Oregon hosted two virtual workshops with support from Pacific Northwest National Laboratory in January 2023. These workshops were intended to co-create new principles and perspectives for designing renewable energy landscapes for the Southwest and Pacific Northwest, respectively, balancing place-based perspectives and at-scale deployment. Working across six design pathways through three phases, participants in the Southwest Workshop established and prioritized design opportunities by identifying relevant actions that are high impact, low effort; high impact, high effort; low impact, high effort; low impact, low effort. In contrast, participants in the Pacific Northwest Workshop produced a series of design options for the three sites to support broader efforts to visualize energy infrastructure deployment. The workshop outcomes reflect the current state of innovation in designing renewable energy landscapes. Collective understanding is largely focused on the practical—what is feasible in this moment—rather than pushing the boundaries on what might be possible. Achieving that next step requires that we first catch up to existing innovation in implementation and design since it is not yet commonplace. These workshops served as the first step in reimagining the potential of energy infrastructure across landscapes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Electrochemical ammonia synthesis via nitrate reduction on Fe single atom catalyst

Electrochemically converting nitrate, a widespread water pollutant, back to valuable ammonia is a green and delocalized route for ammonia synthesis, and can be an appealing and supplementary alternative to the Haber-Bosch process. However, as there are other nitrate reduction pathways present, selectively guiding the reaction pathway towards ammonia is currently challenged by the lack of efficient catalysts. Here we report a selective and active nitrate reduction to ammonia on Fe single atom catalyst, with a maximal ammonia Faradaic efficiency of ~ 75% and a yield rate of up to ~ 20,000 μg h –1 mg cat. –1 (0.46 mmol h –1 cm –2 ). Our Fe single atom catalyst can effectively prevent the N-N coupling step required for N 2 due to the lack of neighboring metal sites, promoting ammonia product selectivity. Density functional theory calculations reveal the reaction mechanisms and the potential limiting steps for nitrate reduction on atomically dispersed Fe sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Exponential time differencing for the tracer equations appearing in primitive equation ocean models

The tracer equations are part of the primitive equations used in ocean modeling and describe the transport of tracers, such as temperature, salinity or chemicals, in the ocean. Depending on the number of tracers considered, several equations may be added to and coupled to the dynamics system. In many relevant situations, the time-step requirements of explicit methods imposed by the transport and mixing in the vertical direction are more restrictive than those for the horizontal, and this may cause the need to use very small time steps if a fully explicit method is employed. To overcome this issue, we propose an exponential time differencing (ETD) solver where the vertical terms (transport and diffusion) are treated with a matrix exponential, whereas the horizontal terms are dealt with in an explicit way. In this work, we investigate numerically the computational speed-ups that can be obtained over other semi-implicit methods, and we analyze the advantages of the method in the case of multiple tracers.

42 ENGINEERING↗
DOE OSTI2022

Aeroelastic Modeling for Distributed Wind Turbines: March 11, 2021 - November 10, 2021

Aeroelastic modeling (AM) is the primary methodology for structural and performance assessment of any wind turbine whereby providing an understanding of the impact of design parameters on its loading and power response before witnessing it in the field. Despite these advantages, the use of AM in the Distributed Wind Technology (DWT) sector is limited, especially within the less established manufacturers. This project represents an in-depth assessment of the status of AM and its role within the Standards for the DWT industry. The study gathered input and feedback from a large number of national and international stakeholders, reviewed technical strengths and weaknesses of the current edition of the design standards, analyzed recent industry workshops' and meetings' minutes, collected publicly available AM templates, and provided an evaluation of the existing AM codes. The study achieved several goals including providing strategies for the load assessment categorization of turbines based on rotor swept area and archetype, and guidance for AM verification and validation (V&V), which includes discussions of measurement requirements and a sample test-plan useful for future V&V campaigns and design standard development. This document summarizes the different tasks conducted in the course of the project and highlights the steps required to improve the AM adoption based on a multifaceted approach that encompasses: 1) augmenting AM software capabilities, 2) publishing AM best-practices and design-basis, 3) creating new model templates, 4) providing guidance for V&V of codes and specific turbine models leveraging field testing best-practice, and 5) addressing weaknesses in the current standards. Many of the future objectives identified in this study could leverage NREL's upcoming testing campaigns of three modern distributed wind turbines. Recommendations within this study will advance the value and the ease-of-use of AM, thereby allowing the industry to better capitalize this underutilized tool resulting in a more efficient design process, an easier path to certification, and overall better and more distributed reliable wind turbine products.

17 WIND ENERGY↗
DOE OSTI2022

Cost-effective Manufacturing and Morphological Stabilization of Nanostructured Cathodes for Commercial Solid Oxide Fuel Cells (SOFCs) [Slides]

The overall goals of the program were to develop methods for preparing and stabilizing SOFC electrodes by infiltration that can be manufactured on a practical scale, then transfer those methods to cells in stacks. Cathodes prepared by infiltration of nanoparticles into a porous scaffold of the electrolyte have demonstrated outstanding electrochemical performance and mechanical strength but are difficult to manufacture due to the large number of infiltration steps required to produce a conductive composite and show poor stability due to sintering of the nanoparticles. At Penn, the main goal was to develop a fabrication method that uses only a small number of infiltration steps. Infiltration with molten salts and electrodeposition were pursued but deemed impractical. A method in which an electronically conductive scaffold consisted of a composite of a mixed conductor, LSF (La 0.9 Sr 0.1 FeO 3 ), with yttria-stabilized zirconia (YSZ) was found to be promising. While some cation mixing between LSF and YSZ was observed during calcination, there was no evidence for new phases in XRD and incorporation of Zr into the perovskite could be minimized by reducing the Sr content of the LSF. To stabilize nanoparticles infiltrated into the LSF-YSZ composite scaffold, the USC team examined the effects of Atomic Layer Deposition with ZrO 2 and infiltrated nanoparticles. Significantly enhanced stability was observed with the infiltrated nanoparticles. The FuelCell Energy team prepared 4”x4” cells in which an LSF-YSZ composite scaffold was cofired with the YSZ electrolyte and infiltrated with LSCF nanoparticles. Apparently because the LSF-YSZ scaffold layer was very thin in this case, the cation mixing that occurred during calcination resulted in a poor scaffold-electrolyte interface which caused reduced performance.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Plasma Guns for Magnetized Fuel Targets for PJMIF

In plasma jet driven magneto-inertial fusion (PJMIF) an array of discrete supersonic plasma jets is used to form a spherically imploding plasma liner, which then compresses a magnetized plasma target to fusion conditions. With funding from ARPA-E’s ALPHA program and from Strong Atomics LLC, HyperJet Fusion Corp and HyperV Technologies Corp. previously developed the plasma guns required for an experimental demonstration of the plasma liner formation part of the concept. A 36-gun demonstration of an imploding spherical plasma liner is currently underway on the PLX facility at Los Alamos National Laboratory. This present project addresses the next step required for a complete PJMIF concept, i.e. developing the magnetized plasma target. We proposed to form the target by stagnating a number of magnetized plasma jets in the center of the target chamber. This is accomplished by adding a bias field coil to the plasma liner gun to form a magnetized plasma jet. This experimental development took place at HyperJet in a geometry replicating the bias field environment that will be seen on a PLX port so the results are directly transferrable to the PLX experiment. The objective of this effort was the technical development and characterization of a new magnetized plasma jet using a high-performance, high momentum flux, contoured-gap coaxial plasma gun appropriate for use on the next stage of the PLX experiment. Electromagnetic modeling of the coil indicated the coil was best placed around the aluminum tubes of the gun transmission line, rather than around the chamber port as originally proposed. This maximized field strength in the breech and yielded much better flux linkage between gun electrodes. A 30-turn coil was ultimately implemented, allowing long pulses that could diffuse through the metal walls on the timescale of interest. \machtwo modeling predicted that less capacitance in the main PFN could potentially improve plasma jet velocities due to better matching of the current to the smaller plasma mass and the existing electrode contour designed to suppress blowby. This proved true, as testing showed markedly improved performance when the original 600uF bank was reduced to 400uF. A number of diagnostics were built and/or upgraded in order to characterize the plasma jets, inluding laser interferomtery for density, photodiodes for velocity, Bdot probes for magnetic field measurements, a Triple probe for temperature measurements, and spectroscopy for impurity content. A plasma gun with the 30-turn magnet coil installed, a 70% reduction in gas valve plenum volume, and a 33% reduction in main PFN capacitance produced a dense, high velocity, well magnetized plasma jet. We met or exceeded virtually all of the plasma jet parameter goals. Peak velocity of 135 km/s exceeded the 100 km/s goal by 35%, while the peak density of over 1.0x10 15 cm -3 was 3.3 times the goal of >3.0x10 14 cm -3 . Shot-to-shot repeatability is excellent, with a jitter of less than 300ns observed on the arrival fronts of the photodiode signals from one shot to the next. Average plasma jet lengths of 33cm (at 120km/s) were slightly longer than the 20cm goal, but jets as short as 11.8cm were observed at 135km/s. Mass is much higher than the targeted goal, averaging 106ug per shot compared to 20ug. The magnetic field is still a bit lower than desired, with a maximum to date of ~811G, compared to the goal of 1000G. Average values, though, were typically in the 300-450G range, when measured further downstream after some expected in flight decay. Temperature measurements are still a work in progress. Increasing the B field and completing temperature measurements will be continued on into the ongoing BETHE project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Study of Additive Manufacturing Applications to Geothermal Technologies Final Project Report

This report summarizes work performed to assess the potential for utilizing additive manufacturing (AM) to substantially improve either the availability, performance or cost basis for tools and components that are required for geothermal energy production. A systematic cataloging of geothermal activities, associated technologies, and current manufacturing methods was first undertaken. This included literature reviews as well as interviews with subject matter experts, service companies and OEMs. An industry workshop was held as part of this portion of the project to obtain input and concerns from a broad range of OEMs, service providers and end users. This workshop was also used to gage the current level of AM activity in industry, receptiveness to the use of AM manufactured parts, and any up front concerns that may exist. A summary of the workshop is presented in this report. Representative components and assemblies and their current manufacturing methods were then analyzed by additive manufacturing experts at a company called Senvol to determine the feasibility and required steps for producing parts by additive manufacturing. A step by step description of conventional manufacturing of the parts was also performed to establish a manufacturing baseline for comparison purposes. This analysis also considered and described the benefits of additively manufacturing the parts in terms of specific AM systems, material availability for AM, dimensional requirements and potential economic advantages. Details of the manufacturability assessment were summarized in a report which is included as a chapter in this document. The analysis of the AM subject matter experts was then be used by techno-economic analysts to perform a comparative economic evaluation of the manufacturing of select technologies by AM and conventional approaches. This activity leveraged ORNL expertise and prior experience in other applications. A framework based on assessing cost, volume production considerations, and time to manufacture was created to more easily discern the advantages or disadvantages of additive versus conventional manufacturing methods. The report concludes with a general assessment of the current applicability of AM for geothermal technologies, AM gaps and needs related to typical geothermal hardware, and the potential benefits and impacts of AM to geothermal energy production.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Nuclear imaging to diagnose and correct target-driver registration at high-repetition-rate for improved reactor efficiency

Inertial Confinement Fusion produces energy from a burning plasma lasting a fraction of a nanosecond. Power plant designs based on Inertial Fusion Energy (IFE) will need to ignite targets 1-10 times a second, fired as projectiles into a chamber and delivering the driver to the target location. Driver asymmetry is known to impact ICF experiments at gain near unity and remains a candidate for primary yield degradation, and therefore fusion power plant energy output, for high-gain target designs. For a Fusion Power Plant (FPP), continuous and real-time monitoring of target performance provides an opportunity to stabilize or correct the target-driver registration. This requires x-ray and neutron imaging with a large field-of-view, sufficiently high resolution, fast analysis and to subtend a minimal solid angle. We introduce design criteria for such an imaging system that uses a coded aperture and time-gated, lens-coupled scintillators as a viable solution and outline the research steps required to field such a system. Integrating the imaging system into an IFE power plant as part of an active feedback loop could increase average power output by reducing the failure rate due to mis-aligned drivers with respect to the target.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

National Energy Water Treatment & Speciation (NEWTS): A Water & Critical Mineral Database and Dashboard

The scarcity of water resources, the need for beneficial water reuse, and the challenges of wastewater treatment are becoming increasingly pressing in economic, social, and environmental domains. Addressing these concerns requires effective treatment strategies to manage wastewater streams and tackle environmental and economic issues. Furthermore, the recovery of critical minerals from the waste streams associated with energy production holds the promise of offsetting treatment costs and securing local sources of valuable minerals. However, relevant data on these waste streams are dispersed and challenging to locate. The process of ingesting such data into modeling software often involves multiple steps, requiring data restructuring to meet software-input requirements. The non-standardized reporting of water data makes data aggregation and reformatting a time-consuming process. Additionally, essential attributes necessary for modeling water treatment and mineral scale formation are frequently missing. Moreover, data gaps vary depending on the region of interest. Consequently, there is a pressing need for high-quality energy-water composition data that can be easily imported into water chemistry modeling software. To address this need, the National Energy Technology Laboratory has created the National Energy Water Treatment and Speciation (NEWTS) Database and Dashboard—a free online tool catering to community leaders and water researchers. NEWTS facilitates a comprehensive understanding of the composition of energy-related wastewater streams in the United States. The datasets provide detailed concentrations and speciation of major and minor aqueous compounds in energy-related wastewater streams, including power plant leachate, acid mine drainage, brackish water, and oil and gas produced water across the United States. Many of the aqueous species are critical minerals (Li, REEs) in high demand to modernize the world’s energy infrastructure. Many of the datasets also contain volumetric flow-rates needed to model the treatment and reuse scenarios in advanced aqueous chemistry software programs. The NEWTS Database and Dashboard offer public access to hitherto challenging-to-access datasets, presented in a standardized format that is tailored for easy input into aqueous chemistry modeling software. By performing the work needed to transform dispersed, disparate data sources into unified, model-ready datasets, NEWTS serves as an essential resource in advancing water treatment research and sustainable water resource management.

produced water management↗
DOE OSTI2026

Measurement of the Dispersion in the CeC Beamlines

The coherent electron cooling requires to match the relativistic factors of the hadron and electron beam within 10 -4 accuracy. Initial matching is based on the energy measurement of the electron beam using solenoid with accuracy about 10 -3 (the hadron relativistic factor can be found from the revolution frequency). Further matching is done with observation of the recombination rate with fine tuning based on the cooling rate. The last two steps require change of the electron energy which is achieved by change of the linac voltage. The interaction of the hadron and electron beams is affected by the transverse overlap of two beams. To minimize the effect, we need zero dispersion in the common section. The merge of the beams a dogleg transfer line is used containing two dipoles and three quadrupoles. The zeroing of dispersion is performed by settings of the quadrupoles. We have developed two ways to measure the dispersion. In the first mostly commonly used we change both dipoles by the same value creating the mismatch between the electron energy and bending magnet. In the compensated dogleg the position in the second dipole should not change, and the trajectory angle will change by the same amount as deflecting angle but in opposite direction. Therefore, the trajectory in the common section will not change. The value of the dispersion can be calculated from the beam displacement divided by the relative chang of the dipoles’ current. The second method is based on the change of the electron beam energy using linac. This method requires electron orbit alignment with linac axis to avoid beam steering. The results are shown in Fig.1 and Fig. 2. The first figure shows the dispersion prior the correction, and the second figure after the correction.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Training quantum neural networks using the quantum information bottleneck method

Abstract We provide in this paper a concrete method for training a quantum neural network to maximize the relevant information about a property that is transmitted through the network. This is significant because it gives an operationally well founded quantity to optimize when training autoencoders for problems where the inputs and outputs are fully quantum. We provide a rigorous algorithm for computing the value of the quantum information bottleneck quantity within error ε that requires O ( log 2 ⁡ ( 1 / ϵ ) + 1 / δ 2 ) queries to a purification of the input density operator if its spectrum is supported on { 0 } ⋃ [ δ , 1 − δ ] for δ > 0 and the kernels of the relevant density matrices are disjoint. We further provide algorithms for estimating the derivatives of the QIB function, showing that quantum neural networks can be trained efficiently using the QIB quantity given that the number of gradient steps required is polynomial.

Çatlı, Ahmet Burak (ORCID:0000000152294141)↗
DOE OSTI2025

Role of Metal Cocatalysts in the Photocatalytic Production of Hydrogen from Water Revisited

The use of photocatalysts to promote the production of molecular hydrogen from water, following the so-called water splitting reaction, continues to be a promising route for the green production of fuels. The molecular basis of this photocatalysis is the photoexcitation of electrons from the valence band of semiconductors to their conduction band, from which they can be transferred to chemical reactants, protons in the case of water, to promote a reduction reaction. The mechanism by which such a process takes place has been studied extensively using titanium oxide, a simple material that fulfills most requirements for water splitting. However, photocatalysis with TiO 2 tends to be highly inefficient; a cocatalyst, commonly a late transition metal (Au, Pt) in nanoparticle form, needs to be added to facilitate the production of H 2 . The metal is widely believed to help with the scavenging of the excited electrons from the conduction band of the semiconductor in order to prevent their recombination with the accompanying hole formed in the valence band, a step that cancels the initial photon absorption and competes with the photolytic chemical reduction. Here we review and analyze the molecular basis for that mechanism and argue for an alternative explanation, that the role of the metal is to help with the recombination of the atomic hydrogen atoms produced by proton reduction on the semiconductor surface instead. First, we summarize what is known about the electronic structure of these photocatalysts and how the electronic levels need to line up for the reduction of protons in water to be feasible. Next, we review the current understanding of the dynamics of the steps associated with the absorption of photons, the de-excitation via electron–hole pair recombination and fluorescence decay, and the electronic transitions that lead to proton reduction, and contrast those with the rates of the chemical steps required to produce molecular hydrogen. The following section addresses the changes introduced by the addition of the metal cocatalyst, comparatively evaluating its role as either an electron scavenger or a promoter of the recombination of hydrogen atoms. A discussion of the viable chemical mechanisms for the latter pathway is included. Finally, we briefly mention other associated aspects of this photocatalysis, including the possible promotion of H 2 production with visible light via resonant excitation of the surface plasmon of Au nanoparticles, the use of single-metal (Au, Pt) atom catalysts and of yolk–shell nanostructures, and the reduction of organic molecules. We end with a brief personal perspective on the possible generality of the concepts introduced in this Critical Review.

08 HYDROGEN↗
DOE OSTI2025

How Solvent Mediates the Catalytic Fate of 2-Methoxyphenol in Hydrodeoxygenation Catalysis?

Kinetic and isotopic assessments combined with theoretical calculations shed light on the mechanistic differences in terms of the number of hydrogen addition steps and the electronic charges of reactive hydrogen in the catalytic sequence leading to the Ar−OCH 3 scission of 2-methoxyphenol occurring at various interfaces of vapor−Ru, cyclohexane−Ru, and water−Ru. At vapor−Ru and cyclohexane−Ru interfaces, the initial hydrogen adatom (H*) additions on the phenyl ring disrupt its aromaticity, as a step required to occur before kinetically relevant Ar−OCH 3 scission on an ensemble of Ru sites. The number of H* addition events prerequisite to the formation of the kinetically relevant Ar−OCH 3 scission transition state, however, is larger at the cyclohexane−Ru interface than those at the vapor−Ru and water−Ru interfaces. The preferential solvation of 2-methoxyphenol derived reaction precursors and H* weakens their adsorption on Ru sites, which leads to a decrease in the activation barrier for the third H* addition step and in turn a larger number of H* additions. At the water−Ru interface, water as a polar protic solvent promotes the Ar−OCH 3 scission by enabling a mechanistically distinct catalytic route an adjacent water molecule from the solvent layer assists with the intramolecular proton shuttling from the hydroxyl group (−OH) to the vicinal methoxy group (−OCH 3 ) of 2-methoxyphenol, evolving a highly charged transition state that is further stabilized by the water solvent layer, thereby leading to Ar−OCH 3 scission rate constants that are much higher than those at the vapor−Ru interface and, when comparing at the same H 2 chemical potential, higher Ar−OCH 3 scission turnovers. Furthermore, these distinct mechanistic details of the Ar−OCH 3 scission at various reaction interfaces, inferred from experiment and theory, illustrate how a solvent either solvates reaction intermediates and transition states or directly participates in the formation of kinetically relevant transition states, leading to changes in the free energy landscape, thus rewriting the catalytic fates in hydrodeoxygenation reactions.

09 BIOMASS FUELS↗