Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STALLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Effect of Surface Roughness on Dynamic Stall in Pitching Motion

Dynamic stall plays a critical role in determining the performance and stability of a wide range of fluid-dynamics systems in various engineering applications. This unsteady aerodynamic phenomenon is particularly significant for maneuvering aircraft wings, jet aircraft subjected to gust encounters, helicopter rotor blades, and wind turbine blades [1–3]. The prediction of the dynamic stall vortex (DSV) is challenging due to factors such as unsteady aerodynamics, three-dimensional (3-D) effects, turbulence and flow separation, incoming gust, and surface impact effects [4–6]. Hence, advanced computational techniques and modeling approaches in computational fluid dynamics (CFD) would be required to enhance the accuracy and reliability of DSV predictions in dynamic stall scenarios. In the past, Batther and Lee [7] employed delayed detached eddy simulations (DDES) to understand the flow physics associated with the onset of dynamic stall. Their approach demonstrated that DDES achieves results comparable to those obtained from large-eddy simulations at a reduced computational cost. In another study, Khalifa et al. [8] examined the 3-D aspects of dynamic stall on a NACA 0012 airfoil using DES solvers. In conclusion, the findings underlined the superiority of 3-D simulations over two-dimensional approaches, particularly in predicting the lift coefficient values and capturing dynamic stall stages more precisely.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Novel plasma actuator for mitigation of dynamic stall

A novel plasma actuator, the Linear Counter-flow using a Point Embedded Electrode (LCPEE), is developed for the prevention of dynamic stall for a sinusoidal pitching movement between α = 4° and α = 18°. The LCPEE is implemented on a NACA0012 airfoil and tested at a Reynolds Number of Re c = 2 × 105 and reduced frequency of k = π/16. Prior investigations using a standard linear actuator showed that the exposed electrode introduced perturbations passively which delayed dynamic stall when the actuator was off. For the LCPEE actuator, when turned off, there is least passive delay. When the LCPEE is turned on at St f = 50, the dynamic stall is prevented for the sinusoidal pitching motion of the airfoil. The LCPEE actuator is also tested for the same sinusoidal motion between α = 6° and α = 20°. Four cases are considered for the higher α range of motion: actuator off, actuator on at St f = 50 with a sinusoidal input waveform, actuator on at St f = 50 with a triangular input waveform, and actuator on at Stf = 100 with a sinusoidal input waveform. Specifically for the last case, experiment shows no flow reversal demonstrating the efficacy of LCPEE in controlling the dynamic stall. The effects of LCPEE on the flow energy distribution have also been studied by using proper orthogonal decomposition (POD) method.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

High-Fidelity Simulation Aerodynamics Dataset of NACA 0012 and 0021 Airfoils

The repository contains time series data of pressure, viscous and moment forces for the NACA 0012 and 0021 airfoils at angles of attack (AOA), 5, 17, 30, 45, 60 and 90 degrees. The data was generated during the high-fidelity simulations of the airfoils using the open-source CFD code, Nalu-Wind (https://github.com/Exawind/nalu-wind). The research objective was to study the effects of mesh resolution and turbulence model on the three-dimensional deep stall aerodynamics of the airfoils, which has been published in the Journal of Turbulence (https://doi.org/10.1080/14685248.2023.2225141). Several meshes of the O-grid type were generated using the modified Pointwise Glyph script of Carrigan (https://github.com/pointwise/AirfoilMesh) by varying the wall normal and spanwise resolutions. Note that, the geometry was extruded by four chord lengths in the spanwise direction. In the paper, we showed that Improved Delayed Detached Eddy Simulation (IDDES) hybrid RANS/LES turbulence model with a minimum of 24 cells per chord length in the spanwise direction is necessary to correctly predict the loads in the deep stall regime. Under the NACA 0012 airfoil directory, the data for several combinations of wall-normal and spanwise resolutions are presented in each of the AOA subdirectories. The corresponding experimental data for the lift and drag polars can be found in the "exp_data" subdirectory. The directory for the NACA 0021 airfoil consists of CFD force data and airfoil polars for Reynolds numbers 2.7e5 and 2.0e6.

17 WIND ENERGY↗
DOE OSTI2025

Thermal and electric multidomain dynamic model for integration of power grid distribution with behind-the-meter devices

As renewable energy sources like solar and wind power become more integrated into the grid, coordinated control of behind-the-meter devices is crucial for enhancing grid flexibility and reliability and for meeting cost targets, with standardized models being developed to support this transition. The increasing flexibility and uncertainty of integrated renewable energy grids, along with interactions between various subsystems, make traditional steady-state modeling insufficient to capture transient and dynamic behaviors. Current models (e.g., composite load and battery equivalent models) focus on thermodynamic or electrical characteristics but overlook critical electromechanical interactions. This limits the ability to share performance information for grid services and hampers fast dynamic simulations. In addition, motor stalling is usually triggered by a fault event and attributed to the characteristics of the mechanical torque of the motor, resulting in absorption of a large amount of reactive power during the stalling period. Further, this significant withdrawal of reactive power will deteriorate the dynamic voltage stability of power grids and cause delayed voltage recovery. Therefore, an in-depth modeling of the thermodynamics or mechanical torque is essential to study the impacts of the realistic torque characteristics of those behind-the-meter devices on power system voltage stability. This study developed a dynamic multidomain model for building HVAC systems, such as air-source heat pumps, to simulate their thermal and electrical responses to grid transients. The model can accurately predict power metrics with a mean absolute percentage error of 10%, by validating against with power system computer-aided design performance data. Case studies demonstrate the model capability of capturing the transient response to sudden voltage changes, rapid load fluctuations, and system shutdowns respectively. During a sudden voltage drop (30% for 0.1s), a fully loaded heat pump’s motor speed dropped, continued declining, and shut down after 3.6s, with severe power oscillations and a torque spike. A partially loaded unit experienced temporary oscillations but stabilized. Under higher building loads, compressor speed increased from 64% to 100%, with power and torque rising before stabilizing. In safety-triggered shutdowns, power decreased after minor fluctuations, and torque briefly spiked before dropping to zero.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Freestream turbulence effects on unsteady wind turbine loads and wakes: An IDDES study

We investigate numerically the effects of freestream turbulence on the unsteady aerodynamics and wakes of the National Renewable Energy Laboratory Phase VI wind turbine rotor for increasing wind speed. Turbulence is modeled using the Improved Delayed Detached-Eddy Simulation (IDDES) method. As a first step, a detailed mesh resolution study is conducted with the decaying freestream turbulence model at turbulence intensity of 0.5%. Our blade-resolved IDDES simulations show that grid-independent average torque and thrust results can be achieved with relatively coarse meshes, whereas dramatically higher mesh resolution is required for grid-independent results for power spectral densities of thrust force, especially in the deep-stall regime. Comparing the loads with the Shear-Stress Transport model demonstrates the superiority of IDDES in predicting massively separated flows. The aerodynamic performance and wake predictions with the decaying freestream turbulence model are compared with the synthetic freestream turbulence model. Both models predict nearly the same loads, spectral energy content, and wake characteristics. The properties of both the near- and far-wake regions are then examined. Furthermore, we show that separated boundary layers accelerate turbulent mixing and entrainment of the external flow, which results in faster wake recovery. The effect of increasing turbulence intensity to 6% is investigated using the synthetic freestream turbulence model. In contrast with the fully attached boundary layer, higher freestream turbulence in deep stall does not significantly affect the loads and vortex-shedding characteristics. However, the turbulent mixing in the wake is enhanced, which further hastens the recovery of the self-similar velocity profile. In general, increasing the wind speed at high turbulence intensity shifts the recovery farther upstream and increases the wake width.

17 WIND ENERGY↗
DOE OSTI2025

High-resolution X-ray structure of Gln143Asn manganese superoxide dismutase captures multiple hydrogen peroxide-binding sites

Human mitochondrial manganese superoxide dismutase (MnSOD) converts superoxide into hydrogen peroxide and molecular oxygen, serving as a key defence against oxidative damage. Despite extensive studies, the full structural characterization of H 2 O 2 -binding sites in MnSOD remains largely unexplored. Previous H 2 O 2 -soaked MnSOD structures have identified two distinct H 2 O 2 -binding sites: one directly ligated to the catalytic manganese (LIG position) and another at the active-site gateway (PEO position) between the second-shell residues Tyr34 and His30. In this study, a kinetically impaired Gln143Asn MnSOD variant is used to trap and explore additional H 2 O 2 -binding sites beyond the second-shell solvent gate. In the wild-type enzyme, Gln143 mediates proton transfers with the manganese-bound solvent (WAT1) to drive redox cycling of the metal, which is necessary for effective superoxide dismutation. Substitution with Asn stalls catalysis because the increased distance from WAT1 disrupts critical proton-coupled electron-transfer (PCET) events, and the redox cycling of the active-site metal is impaired. This, in turn, stalls the electrostatic cycling of positive charge on the enzyme surface and enhances the likelihood of trapping transient H 2 O 2 -bound states in this variant. The results reveal several H 2 O 2 molecules leading up to the active site, in addition to the canonical LIG and PEO positions.

Dasgupta, Medhanjali [University of Nebraska Medic↗
DOE OSTI2025

Enhancing chemical bioproduction with rational control of bacterial post-translational modifications

Efficient conversion of inexpensive feedstocks to valuable chemicals by microbes is critical for a robust bioeconomy, but the ability to rationally design bacteria is hampered by insufficient knowledge of how post translational modifications (PTMs) control bacterial protein function and thus bioproduction phenotypes. Our study will focus on the lysine acetylation, a ubiquitous bacterial PTM that can affect the function of enzymes in central metabolism that are often critical for bioproduction processes, disrupt transcriptional regulation, and reduce translation. However, most lysine acetylation data is observational, which means that we do not know when, how, and what specific acetylated residues affect protein function and bacterial physiology. For our model host, we will use a Pseudomonas putida strain that we previously engineered to convert lignocellulosic feedstocks into chemicals such as itaconic acid (ITA). With this strain, we use a dynamic two-stage bioproduction process in which ITA is produced during a non-growth associated production phase. Production is highest during growth stages when lysine acetylation is low in other organisms (early stationary phase) and stalls in conditions where acetylation is highest (late stationary phase). The switch from high to stalled ITA production is also correlated with an unexpected increase in acetate levels – the precursor to non-enzymatic lysine acetylation. As such, we predict that lysine acetylation plays a substantial role in regulating the metabolic pathways required for ITA production. We will develop a generalizable approach that combines high-throughput genetic screens and cutting-edge genome engineering with state-of-the-art proteomics, metabolomics, and genetic code expansion methods to identify and modulate lysine acetylation patterns in bacteria. Ultimately, these strategies aim to manipulate protein expression and acetylation patterns to enhance bioproduction phenotypes (e.g., sustained ITA production in late stationary phase).

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Three-Dimensional Aerodynamics and Vortex-Shedding Characteristics of Wind Turbine Airfoils over 360-Degree Angles of Attack

In this work, we present the first three-dimensional (3D) computational investigation of wind turbine airfoils over 360° angles of attack to predict unsteady aerodynamic loads and vortex-shedding characteristics. To this end, static–airfoil simulations are performed for the FFA-W3 airfoil family at a Reynolds number of 107 with the Improved Delayed Detached Eddy Simulation turbulence model. Aerodynamic forces reveal that the onset of boundary-layer instabilities and flow separation does not necessarily coincide with the onset of stall. In addition, a comparison with two-dimensional simulation data and flat plate theory extension of airfoil polars, suggest that, in the deep stall regime, 3D effects remain critical for predicting both the unsteady loads and the vortex-shedding dynamics. For all airfoils, the vortex-shedding frequencies are found to be inversely proportional to the wake width. In the case of slender airfoils, the frequencies are nearly independent of the airfoil thickness, and their corresponding Strouhal number St is approximately 0.15. Based on the calculated St, the potential for shedding frequencies to coincide with the natural frequencies of the International Energy Agency 15 MW reference wind turbine blades is investigated. The analysis shows that vortex-induced vibrations occur primarily at angles of attack of around ±90° for all airfoils.

17 WIND ENERGY↗
DOE OSTI2026

Impacts of Multidimensional Progenitor Perturbations on Core-collapse Supernova Explosions

Numerical studies of core-collapse supernovae have demonstrated the importance of nonradial motions in precollapse progenitors on the explosion outcome. We use the Chimera neutrino radiation hydrodynamics code running seven two-dimensional simulations of 15 M⊙ progenitors with different progenitor structures introduced by different one- and two-dimensional precollapse stellar evolution environments to examine the impacts of stellar structure and nonspherical motion in the precollapse progenitor on the development of explosions. We compare the explosion evolution of these models in terms of shock dynamics, diagnostic energy, neutrino heating, accretion, explosion geometry, nuclear abundances, and turbulent convection. We also analyze how stochastic variation impacts our simulations. Contrary to results reported in prior studies examining the impacts of multidimensional progenitors, we observe similar shock revival times and explosion development in our simulations despite differences in initial compositions and structures. We find no discernible impact from the accretion of nonradial perturbations from a multi-D progenitor onto the stalled shock in the revival and strength of explosion, as fully developed neutrino-driven convection behind the stalled shock is similar for all our models. For models with physically sourced noise in the iron core, a strong oscillation of the shock occurs after bounce and deflects infall laterally, and accelerates the saturation of the lateral turbulent kinetic energy. An examination of model stochasticity shows that any prior expected impacts on explosive outcome due to convection-related perturbations lie below the detectable threshold of numerical variation.

Chen, Chien-Hui [North Carolina State University]↗
DOE OSTI2026

Nonenergy Biomass Carbon Removal and Storage (BiCRS): Assessing Durability of Nongaseous Carbon Products Across Terrestrial Storage Fates

Biomass Carbon Removal and Storage, or BiCRS, pathways use plants or algae that remove carbon dioxide from the atmosphere through photosynthesis and store it underground or in long-lived products. While some BiCRS approaches generate an energy product, all BiCRS approaches generate a carbon product. A new subset of BiCRS approaches focus on the storage of these raw or converted carbon products for generation of carbon credits. However, the durability of these approaches is highly variable as carbon products vary widely in their “form” and the conditions of their “fate.” We organize our thinking about carbon products and their durability around these two primary axes. The durability of carbon product “forms” is mediated by chemical recalcitrance and ranges substantially across agricultural residues, municipal solid waste, woody biomass, and nongaseous products of thermochemical conversion (e.g., biochars and bio-oils). Meanwhile, terrestrial storage “fates” vary in the mechanism employed to stall decay, including surface storage, dry storage, shallow anoxic storage, and deep or geologic anoxic storage (or injection). Each mechanism has different implications for suitability with different feedstock forms as well as long-term risks. We present a framework for assessing durability of solid or liquid raw and conversion carbon products under terrestrial storage fates, highlighting knowns, unknowns, and research priorities moving forward.

09 BIOMASS FUELS↗
DOE OSTI2024

Formation of a Large Cold Groundwater Mantle Helium Anomaly and High Temperature Geothermal Resources in Response to Bimodal Magmatism Near Roosevelt Hot Springs and Utah FORGE, Milford Valley, Southwest Utah

Abstract A large mantle helium anomaly and separate domains of high heat flow are the predominant manifestations of bimodal magmatic activity in the Milford valley. The mantle helium anomaly (1.9–2.6 R/Ra) covers 270 km 2 and is subdivided into two separated domains: a cold shallow groundwater regime and high temperature hydrothermal activity. The zone of anomalous heat flow covers >100 km 2 and is also subdivided into two adjacent domains, comprising hydrothermal activity at Roosevelt Hot Springs (RHS) (3–7 W/m 2 ) and conductive heat flow (100–180 mW/m 2 ). While the transfer of heat and mantle helium at RHS are coupled, heat and helium transfer are decoupled in the adjacent cold groundwater regime to the west. Both the mantle helium and geothermal anomalies are attributed to recent mafic‐felsic magmatic intrusions of >400 km 3 , however, the absence of volcanic eruptions <500,000 years indicates magmas stall before rising to shallow crustal level <10 km depth. Deep level magmatism produces a felsic composition melt, which is inferred to be responsible for the widespread and near uniform range of diluted mantle helium values. A thick and impermeable mass of crystalline granitic basement rock at the mid‐crustal level divides the ascent of mantle helium into separate flow paths. It may also impede the rise of buoyant magma trapping thermal energy that facilitates partial melting, slow cooling, and development of a thick thermal aureole. Partitioning of convective and conductive thermal regimes and independent flow paths supplying deeply derived helium characterize the development of a large long‐lived magma‐related geothermal system.

Geochemistry & Geophysics↗
DOE OSTI2025

Role of Diurnal Cycle of Insolation on the MJO Propagation in the Maritime Continent

The diurnal cycle of convection in the Maritime Continent (MC) has been hypothesized to act as a barrier to the eastward propagation of the Madden‐Julian oscillation (MJO). To test this hypothesis, we use a regional model with realistic MJO to simulate an event from the boreal spring of 2013 that weakened and stalled over the MC. Two simulations are conducted: one that includes the diurnal cycle of insolation (CTL), and another without it (NO_DC). The MJO in the simulations was identified and tracked using a large‐scale precipitation tracking method that distinguishes propagation and non‐propagation unlike the usual Real‐time Multivariate MJO method. In the NO_DC simulation, the absence of diurnal heating reduces land precipitation, allowing more continuous eastward MJO propagation. An analysis of moist static energy budget reveals that MJO maintenance in NO_DC is due to increased longwave heating and reduced advection, whereas the persistent MJO propagation in NO_DC is due to increased advection and reduced longwave heating and surface latent heat flux. These processes, however, may vary across different parts of the MC, emphasizing the complexity of MJO propagation across the MC.

Zhou, Xin [National Center for Atmospheric Researc↗
DOE OSTI2025

Molecular model of TFIIH recruitment to the transcription-coupled repair machinery

Transcription-coupled repair (TCR) is a vital nucleotide excision repair sub-pathway that removes DNA lesions from actively transcribed DNA strands. Binding of CSB to lesion-stalled RNA Polymerase II (Pol II) initiates TCR by triggering the recruitment of downstream repair factors. Yet it remains unknown how transcription factor IIH (TFIIH) is recruited to the intact TCR complex. Combining existing structural data with AlphaFold predictions, we build an integrative model of the initial TFIIH-bound TCR complex. We show how TFIIH can be first recruited in an open repair-inhibited conformation, which requires subsequent CAK module removal and conformational closure to process damaged DNA. In our model, CSB, CSA, UVSSA, elongation factor 1 (ELOF1), and specific Pol II and UVSSA-bound ubiquitin moieties come together to provide interaction interfaces needed for TFIIH recruitment. STK19 acts as a linchpin of the assembly, orienting the incoming TFIIH and bridging Pol II to core TCR factors and DNA. Molecular simulations of the TCR-associated CRL4CSA ubiquitin ligase complex unveil the interplay of segmental DDB1 flexibility, continuous Cullin4A flexibility, and the key role of ELOF1 for Pol II ubiquitination that enables TCR. Collectively, these findings elucidate the coordinated assembly of repair proteins in early TCR.

Paul, Tanmoy↗
DOE OSTI2025

Structural insights into transcriptional regulation by the helicase RECQL5

Abstract Transcription poses a major challenge for genome stability. The RECQL5 helicase helps safeguard genome integrity and is the only member of the human RecQ helicase family that directly binds to RNA polymerase II (Pol II) and affects its progression. While RECQL5 mitigates transcription stress in cells, the molecular mechanism underlying this phenomenon is unclear. Here, we use cryo-electron microscopy to determine the structures of stalled human Pol II elongation complexes (ECs) bound to RECQL5. Our structures reveal the molecular interactions stabilizing RECQL5 binding to the Pol II EC and highlight its role as a transcriptional roadblock. Additionally, we find that, in its nucleotide-free state, RECQL5 twists the downstream DNA in the EC and, upon nucleotide binding, undergoes a conformational change that allosterically induces Pol II toward a post-translocation state. We propose that this mechanism may help restart Pol II elongation and, therefore, contribute to reducing transcription stress.

Biochemistry & Molecular Biology↗
DOE OSTI2024

Gcn2 structurally mimics and functionally repurposes the HisRS enzyme for the integrated stress response

Protein kinase Gcn2 attenuates protein synthesis in response to amino acid starvation while stimulating translation of a transcriptional activator of amino acid biosynthesis. Gcn2 activation requires a domain related to histidyl-tRNA synthetase (HisRS), the enzyme that aminoacylates tRNA His . While evidence suggests that deacylated tRNA binds the HisRS domain for kinase activation, ribosomal P-stalk proteins have been implicated as alternative activating ligands on stalled ribosomes. We report crystal structures of the HisRS domain ofChaetomium thermophilumGcn2 that reveal structural mimicry of both catalytic (CD) and anticodon-binding (ABD) domains, which in authentic HisRS bind the acceptor stem and anticodon loop of tRNA His . Elements for forming histidyl adenylate and aminoacylation are lacking, suggesting that Gcn2 HisRS was repurposed for kinase activation, consistent with mutations in the CD that dysregulate yeast Gcn2 function. Substituting conserved ABD residues well positioned to contact the anticodon loop or that form a conserved ABD–CD interface impairs Gcn2 function in starved cells. Mimicry in Gcn2 HisRS of two highly conserved structural domains for binding both ends of tRNA—each crucial for Gcn2 function—supports that deacylated tRNAs activate Gcn2 and exemplifies how a metabolic enzyme is repurposed to host new local structures and sequences that confer a novel regulatory function.

Science & Technology - Other Topics↗
DOE OSTI2025

Improved pressure-gradient sensor for the prediction of separation onset in RANS models

Here, we improve upon two key aspects of the Menter shear stress transport (SST) turbulence model: (1) We propose a more robust adverse pressure gradient sensor based on the strength of the pressure gradient in the direction of the local mean flow; (2) We propose two alternative eddy viscosity models to be used in the adverse pressure gradient regions identified by our sensor. Direct numerical simulations of the Boeing Gaussian bump are used to identify the terms in the baseline SST model that need correction, and a posteriori Reynolds-averaged Navier-Stokes calculations are used to calibrate coefficient values, leading to a model that is both physics driven and data informed. The two sensor-equipped models are applied to two thick airfoils representative of modern wind turbine applications, the FFA-W3-301 and the DU00-W-212. The proposed models improve the prediction of stall (onset of separation) with respect to the prediction of the baseline SST model.

17 WIND ENERGY↗