Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPOC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Process Design and Techno-Economic Analysis of the Modular Staged Pressurized Oxy-Combustion (SPOC) Power Plant for Biomass

This work describes the process design and techno-economic analysis (TEA) of the modular stage pressurized oxy-combustion (SPOC) power plant for biomass firing and coal-biomass co-firing. The SPOC process was modelled using Aspen Plus®, and largely based on a previous model designed by this group for SPOC coal firing. To enable comparison with current National Energy Technology Laboratory (NETL) Bio-Energy Carbon Capture and Storage (BECCS) studies, a 550 MWe SPOC power plant with a supercritical Rankine cycle (241 bar, 593°C, and 593°C), and 90% carbon capture was modeled, and hybrid poplar biomass was chosen. Two cases were evaluated, namely 100% biomass (carbon negative) and 25% biomass co-firing (carbon neutral), and the 100% Powder River Basin coal firing case was chosen for comparison purposes. In the SPOC process, oxygen is produced via a cryogenic air separation unit (ASU) and the heat generated from the compression of air is integrated into the steam cycle and utilized for boiler feed water regeneration. Unique to the SPOC process, the boilers are arranged in a series-parallel configuration, with minimized flue gas recirculation. The flue gas is cooled and scrubbed in the direct-contact cooler (DCC) column, and the water leaving the bottom of the DCC is at a sufficiently high temperature that it can be used for boiler feed water heating, improving plant thermal efficiency. The SPOC efficiencies were above the BECCS cases with capture, and no efficiency penalty on the SPOC plant was observed with an increase of biomass in the mix mostly due to the higher oxygen content in biomass that resulted in lower oxygen requirement from the ASU, and the higher moisture in biomass that due to the key benefit of the SPOC process can be partially recovered as latent heat.

Magalhaes, Duarte↗
DOE OSTI2018

Enabling Staged Pressurized Oxy Combustion (SPOC): Improving Flexibility and Performance at Reduced Cost

Staged Pressurized Oxy-Combustion (SPOC) is a coal combustion power technology being developed by Washington University in St. Louis (WUSTL) that offers the potential to deliver low-carbon power at a reduced cost. Traditional oxy-combustion plants remove most of the nitrogen in air prior to combustion, thereby burning fuel in oxygen instead of air, producing a flue gas containing primarily CO 2 and water that allows relatively simple CO 2 capture at amounts > 90%. This technology relies on flue gas recycle (FGR) to reduce the peak temperature and radiation that would otherwise occur in a fuel/oxygen only flame. SPOC reduces the peak temperatures of combustion by utilizing two or more pressurized boiler modules connected in series to produce fuel staging; hence, only a portion of the fuel is combusted in any given furnace module. This means that the thermal energy released at each stage can be captured and removed from the gases prior to subsequent stages, when more fuel is introduced. This allows the SPOC process to operate with minimal FGR, avoiding the associated efficiency losses and additional costs. The SPOC process operates at an elevated gas-side pressure, reducing boiler size, enhancing heat transfer to achieve a compact boiler configuration as compared to an atmospheric-pressure boiler design, and allowing the recovery of the latent heat of the water from the flue gas at a temperature useful to the steam cycle. The resultant net efficiency of the system is up to 6 percentage points greater than traditional atmospheric-pressure oxy-combustion, representing a step-change improvement over first-generation oxy-combustion technologies. WUSTL has teamed up with the Electric Power Research Institute, Inc., American Air Liquide, Inc., Doosan Babcock Limited, and the U.S. Department of Energy to develop a practicable and workable boiler design concept associated with the application of SPOC. In particular, due to the staged nature of the heat release, the team has identified the potential for enhanced process flexibility for controlling power generation over a wider load range than is normally available to conventional coal-fired power plants. Improved flexibility is a critical need as coal power plants are being tasked with providing grid stability to balance the growth of intermittent renewables. Not only is flexible operation important, achieving efficient power generation at reduced loads will be key as the plants are likely to operate in this regime for significant periods of time as more renewables become available. At reduced loads, coal-fired steam generators typically face challenges in maintaining temperature control of the reheat steam and to a lesser extent the main steam due to the heat transfer characteristics of these circuits when flue gas quantities are lower. This results in inefficient operation, both in terms of the boiler efficiency and steam turbine heat rate. Since the SPOC process can be configured to deliver targeted heat input to each boiler circuit by adjusting the relative fuel firing rate of each stage, better temperature control can be achieved during dynamic conditions. Oxygen supply flexibility is also a key consideration for the overall flexibility of the SPOC process given the operating constraints of conventional air separation units. The boiler design concept assessment is being carried out to identify the maximum permissible compactness of the SPOC boiler heating surfaces. The assessment will determine the minimum overall height that will deliver appropriate tube operating metal temperatures at full load and achieve rated reheat steam temperatures at low operating loads, balanced against the needs of efficient coal combustion, and the resultant slagging and ash environments. The design parameters are being validated by combustion testing in the 100-kWth pressurized combustion test rig at WUSTL. Testing results and model validation that form the basis of a full-scale boiler design that will encompass both efficiency and flexibility improvements over conventional oxy-combustion processes will be presented.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2016

SPOC Benchmark Case: SNRE Model

The Small Nuclear Rocket Engine (SNRE) was modeled in the Center for Space Nuclear Research’s (CSNR) Space Propulsion Optimization Code (SPOC). SPOC aims to create nuclear thermal propulsion (NTP) geometries quickly to perform parametric studies on design spaces of historic and new NTP designs. The SNRE geometry was modeled in SPOC and a critical core with a reasonable amount of criticality margin was found. The fuel, tie-tubes, reflector, and control drum masses were predicted rather well. These are all very important for neutronics calculations so the active reactor geometries created with SPOC can continue to be trusted. Thermal calculations of the average and hot fuel channels agreed very well. The specific impulse calculations used historically and in SPOC disagree so mass flow rates and impulses differed. Modeling peripheral and power balance components that do not affect nuclear characteristics of the core is not a feature of SPOC and as such, these components should continue to be designed using other tools. A full paper detailing the available SNRE data and comparisons with SPOC outputs will be submitted as a follow-up to this abstract.

MCNP↗
DOE OSTI2024

Process Design and Techno-Economic Analysis of the Modular Staged Pressurized Oxy-Combustion (SPOC) Power Plant for Biomass

This work describes the process design and techno-economic analysis (TEA) of the modular SPOC power plant for biomass firing and coal-biomass co-firing. Two Rankine cycles were considered: a supercritical steam cycle (242 bar, 593°C, 593°C) with 550 MWe net output and a subcritical cycle (166 bar, 566°C, 566°C) with 200 MWe net output. For both cases, 95% carbon capture was modeled, and hybrid poplar biomass was chosen to generate carbon-negative power. In addition, the supercritical 500 MWe case included a 25% biomass co-firing (carbon neutral) case. For both cycles, a 100% Powder River Basin coal firing case was used for comparison purposes. In the SPOC process, oxygen is produced via a cryogenic air separation unit (ASU) and the heat generated from the compression of air is integrated into the steam cycle and utilized for boiler feed water pre-heating. Unique to the SPOC process, the boilers are pressurized and arranged in a series-parallel configuration, with minimized flue gas recirculation. The flue gas is cooled and scrubbed in the direct-contact cooler (DCC) column, and the moisture in the flue gas is condensed, leaving the bottom of the DCC at a sufficiently high temperature such that it can be used for boiler feed water pre-heating, improving plant thermal efficiency. Following drying and purification, CO2 in the flue gas is at the purity required for storage or utilization. The performance data were obtained from process modelling via Aspen Plus®. The stream data from Aspen Plus® were used as an input for the AACE Class 5 cost study. Ultimately, the capital costs, Levelized Cost of Electricity (LCOE), and cost of CO2 captured and avoided were obtained. The HHV efficiency of the carbon negative 550 MWe supercritical SPOC case (34.8%) was clearly above those reported by NETL for the BECCS baseline cases of supercritical pulverized coal with capture (B12B, 31.5%) and the 49% biomass co-firing case with capture (PA3, 29.2%). The HHV efficiency of the carbon-negative subcritical plant is also higher than the subcritical baseline PC plant with capture (case B11B.95) presented by NETL (32% vs 29.7%). The LCOE for the SPOC 100% biomass case was similar to the LCOE for the BECCS 49% biomass with carbon capture case ($147/MWh), and the SPOC carbon neutral case LCOE was lower ($110/MWh) than the cost for the NETL baseline SC coal firing case with 90% carbon capture ($114/MWh).

Magalhaes, Duarte↗
NASA NTRSDate not supplied

Primary Mission Threshold Crossing Events in the TESS SPOC Transit Search

We present an overview of the single- and multiple-sector results of the Science Processing Operations Center (SPOC) transit search in the primary Transiting Exoplanet Survey Satellite (TESS) mission. TESS was designed to survey bright stars in the greater Solar neighborhood in search of transiting exoplanets. Data were acquired at a 2-minute cadence for 16,000-20,000 pre-selected target stars in each 28-day observation sector and processed in the SPOC pipeline at NASA Ames Research Center. The photometry pipeline produced a systematic error corrected light curve for each target star. Light curves were searched for transiting planet signatures by sector for all target stars, and separately for target stars observed in multiple sectors. Potential transit signals for which the transiting planet detection threshold was exceeded and a series of transit consistency tests were passed are referred to as Threshold Crossing Events (TCEs). We highlight the full TCE population and the population of SPOC TCEs that were later identified as TESS Objects of Interest (TOIs). Characteristics of the TCE populations implied by limb-darkened transiting planet model fits are also presented. SPOC pipeline data products are delivered to the Mikulski Archive for Space Telescopes (MAST)(http://archive.stsci.edu/missions-and-data/tess) for access by the community. Funding for the TESS Mission has been provided by the NASA Science Mission Directorate.

TESS↗
DOE OSTI2023

Modular Staged Pressurized Oxy-Combustion (SPOC) Power Plant for Coal and Biomass – Integration of Combustor Boiler and DCC

Critical to the future of power generation is the development of a power plant that will be capable of flexible operation to meet the needs of the modern grid, providing resilient, low-emissions power to a grid that is increasingly seeing a large penetration of intermittent wind and solar. The modular Staged, Pressurized Oxy-Combustion (SPOC) process envisioned by and under development at Washington University in St. Louis (WUSTL) has the potential to achieve these goals. The process offers: 1) a modular plant design for improved operational flexibility; 2) fuel-staging combined with pressurized oxy-combustion, which leads to smaller plant size, higher plant efficiency, and lower cost for pollutant and greenhouse gas removal compared with traditional carbon-capture equipped coal power plants; and 3) small modular boilers and pollutant removal units that can be fabricated in shop and assembled on site, further reducing plant capital costs. Under DOE's support (DE-FE0031925), WUSTL is advancing the development of the critical components for the SPOC power plant, including the integrated combustion system and the direct contact cooler (DCC) from Technology Readiness Level (TRL) 4 to TRL-5, which would allow these technologies to be subsequently incorporated into a pilot plant. This talk will present an overview of the SPOC technology, CFD modeling and validation for burner and boiler development, and recent results to evaluate critical components for system integration needed to advance its TRL.

Magalhaes, Duarte↗
DOE OSTI2023

Development of the Modular Staged Pressurized Oxy-Combustion (SPOC) Power Plant for Coal and Biomass

Critical to the future of power generation is the development of a power plant that will be capable of flexible operation to meet the needs of the modern grid, providing resilient, low-emissions power to a grid that is increasingly seeing a large penetration of intermittent wind and solar. The modular Staged, Pressurized Oxy-Combustion (SPOC) process envisioned by and under development at Washington University in St. Louis (WUSTL) has the potential to achieve these goals. The process offers: 1) a modular plant design for improved operational flexibility; 2) fuel-staging combined with pressurized oxy-combustion, which leads to smaller plant size, higher plant efficiency, and lower cost for pollutant and greenhouse gases removal compared with traditional carbon-capture equipped coal power plants; and 3) small modular boilers and pollutant removal units that can be fabricated in shop and assembled on site, further reducing plant capital costs. Under DOE's support (DE-FE0031925), WUSTL is advancing the development of the critical components for the SPOC power plant, including the integrated combustion system and the direct contact cooler (DCC) from Technology Readiness Level (TRL) 4 to TRL-5, which would allow these technologies to be subsequently incorporated into a pilot plant. This talk will present an overview of the SPOC technology, CFD modeling and validation for burner and boiler development, and recent results to evaluate critical components needed to advance its TRL.

Magalhaes, Duarte↗
DOE OSTI2013

SPOCS: Software for Predicting and Visualizing Orthology/Paralogy Relationships Among Genomes

At the rate that prokaryotic genomes can now be generated, comparative genomics studies require a flexible method for quickly and accurately predicting orthologs among the rapidly changing set of genomes available. SPOCS implements a graph-based ortholog prediction method to generate a simple tab-delimited table of orthologs and in addition, html files that provide a visualization of the predicted ortholog/paralog relationships to which gene/protein expression metadata may be overlaid. AVAILABILITY AND IMPLEMENTATION: A SPOCS web application is freely available at http://cbb.pnnl.gov/portal/tools/spocs.html. Source code for Linux systems is also freely available under an open source license at http://cbb.pnnl.gov/portal/software/spocs.html; the Boost C++ libraries and BLAST are required.

comparative genomics↗
DOE OSTI2024

Modular Staged Pressurized Oxy-Combustion (SPOC) Power Plant for Coal and Biomass – Integration of Combustor Boiler and DCC

Utilities and grid operators worldwide are under significant pressure to incorporate intermittent renewable sources while strategizing on how to maintain the necessary stability and reliability of the grid. The development of a power plant which will be capable of flexible operation to meet the needs of the grid as more intermittent sources like wind and solar energy are incorporated is key to maintain the reliability of the grid. Through the use of innovative and cutting-edge technologies that improve efficiency and reduce carbon emissions, and being small compared to today's conventional utility-scale power plants, the modular Staged, Pressurized Oxy-Combustion (SPOC) process envisioned by and under development at Washington University in St. Louis (WUSTL) has the potential to achieve these goals. Specifically, the process offers: 1) a modular plant design that allows for better operational flexibility; 2) the utilization of fuel-staging and pressurized oxy-combustion, resulting in smaller plant size, improved plant efficiency, and reduced costs for pollutant and CO2 removal compared to traditional power plants with post-combustion capture technology; and 3) the use of small modular boilers and pollutant removal units that can be constructed off-site leading to reduced capital costs for the plant. WUSTL is advancing the development of the critical components for the SPOC power plant, including the integrated combustor-boiler system and the direct contact cooler. To demonstrate the boiler convective section and to obtain critical data for commercial-scale pressurized boiler design, a simulated convective heat transfer boiler test section was designed and integrated with the combustor (radiant section). A direct contact cooler (DCC) was integrated with the combustor-boiler to demonstrate the dynamic operation of the integrated system and the performance of the DCC, including the efficiency for simultaneous removal of NOx and SOx. This talk will present an update on the evaluation of the critical components for system integration, including heat transfer data from the simulated boiler, scrubbing efficiency for the DCC under different operating conditions, and CFD modeling and validation for burner and boiler development.

Magalhaes, Duarte↗
NASA NTRSDate not supplied

Scientific Physical and Operations Characterization (SPOC): Studying Scientists in the Wild to Inform Human Planetary Exploration Operations

The objective of the Scientific Physical and Operational Characterization (SPOC) project is to build an evidence-based description of terrestrial field science to inform the operational, physical, and tool requirements for planetary exploration extravehicular activities (xEVAs). EVAs of the future, including Artemis 2024 and beyond, intend to promote scientific productivity (e.g., LEAG science goals)[1]; however, no clear, objective pathway currently exists to enable this goal, particularly with respect to the desired increase in autonomy imparted to future astronauts. The SPOC project applies expertise in the fields of cognitive systems engineering [2-5], biomechanics, wearable sensors [6-8] and hardware/software to more targetly address these issues. In doing so, a terrestrial fieldwork ground-truth can be established that will benefit human and robotic exploration of other planetary surfaces.

M J Miller↗
DOE OSTI2025

Studying-Polymers-on a-Chip (SPOC)

Code developed for Studying-Polymers-on a-Chip (SPOC) project LDRD-LW-006. Public release needed for sharing code for publication.

Jimenez, JayvicCristian [Lawrence Livermore Nation↗
DOE OSTI2015

Securing Single Points of Compromise (SPoC)

Securing the Single Points of Compromise that provide central services to the institution’s environment is paramount to success when trying to protect the business. (Fisk, 2014) Time Based Security mandates protection (erecting and ensuring effective controls) that last longer than the time to detect and react to a compromise. When enterprise protections fail, providing additional layered controls for these central services provides more time to detect and react. While guidance is readily available for securing the individual critical asset, protecting these assets as a group is not often discussed. Using best business practices to protect these resources as individual assets while leveraging holistic defenses for the group increases the opportunity to maximize protection time, allowing detection and reaction time for the SPoCs that is commensurate with the inherent risk of these centralized services.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2019

New Features in the SPOC Pipeline Release 4.0

The Science Processing Operations Center is in the process of testing and deploying Release 4.0 of the codebase in the March 2019 timeframe. This paper describes the new features of the software and their likely impact on the quality of the TESS science data products. The major goals of Release 4.0 are to improve the extraction of photometry from the pixels in light of the non-uniform pointing performance and the identification of instrumental signatures from the light curves. We also describe modifications to the FFI pipeline to allow the generation of FFI light curves, correction of the instrumental systematics therein, and planet searches, primarily for the purpose of validating the 2-min pipeline against the FFI pipeline, but also to be able to provide cotrending basis vectors (CBVs) derived directly from the FFIs to the public to aid them in their extraction and correction of photometry. We also discuss the improvements in photometric performance of the pipeline and its various components.The lapse in funding experienced between 22 December 2018 and 27 January 2019 significantly delayed our ability to conduct integration testing as planned for late December/early January, delaying the start of V&V by one month to the end of February 2019.The TESS Mission is funded by NASA's Science Mission Directorate as an Astrophysics Explorer Mission.The Science Processing Operations Center is in the process of testing and deplo!"ing Release 4.0 of thecodebase In the March 2019 tlmeframe. This paper describes the new features or the software and theirlikely impact on the quality of the TESS science data products. The major goals or Release 4.0 are to Imtheidentification of instrumental signatures from the light cuNes. We also describe modifications tothe FFI pipeline to allow the generation of FFI light curves, correction of the instrumental systematicstherein, and planet searches, primarily for the purpose of validating the 2-min pipelineagainst the FFI pipeline, but also to be able to provide cotrending basis vectors (C3Vs) ,,.~,.;.derived directly from the FFls to the public to aid them in their extractbn and correction , :-; ~'-'\'.'.of photometry. We also discuss the Improvements In photometric performance• of ~~\":;:•the pipeline and its various components. :,;.-.;The lapse In funding experienced between 22 December 2018 and 27January 2019 significantly delayed our ability to conduct Integrationtesting as planned for late December/early January, delaying thestart of V&V by one month to the end of February 2019.The TESS Mission is funded by NASA's Science Mission Directorateas an Astrophysics Explorer Mission.o.iu.c...,.....~~New Features in SPOC 4.01. Use of quatemions In photometry and centroiding.2. Use of quaternions to Identify high-motion cadences and exclude same.3. Use of the TPS detections to deemphasize pathological cadences ("skyline flattenlng"I.4. Improved CAL calculations for black and smear correction.5. PA brightness metric calculation improvements (induo'e crowding in calrulation)./ • 6. Improved POC spike goodness metric.•~• 7. Improved handling of gaps and momentum duni:>S in POC.8. Improved tuning of POC., 9. Improved attitude tweak correction in PDC.10. Improvements in PDC introduced noise and correlation goodness metrics11. Using the improved spike goodness metric to minimize overlitting in the spikeremover ' • :,''l./ 12. Enable FFI processing through planet search.,,. ,• • "« ,;,,,•.~'A , 13.1 D4.V S mtreinaim-relipnoinrgts d aartcah irveetrdie tvoa Ml aAnSdT p ersistence to database 15. Improved management of jobs on the NAS Pleiadss supercomputer

Jenkins, Jon M.↗