Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SISO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Comparing State-Space Multivariable Controls to Multi-SISO Controls for Load Reduction of Drivetrain-Coupled Modes on Wind Turbines Through Field-Testing

In this paper we present results from an ongoing controller comparison study at the National Renewable Energy Laboratory's (NREL's) National Wind Technology Center (NWTC). The intention of the study is to demonstrate the advantage of using modern multivariable methods for designing control systems for wind turbines versus conventional approaches. We will demonstrate the advantages through field-test results from experimental turbines located at the NWTC. At least two controllers are being developed side-by-side to meet an incrementally increasing number of turbine load-reduction objectives. The first, a multiple single-input, single-output (m-SISO) approach, uses separately developed decoupled and classicially tuned controllers, which is, to the best of our knowledge, common practice in the wind industry. The remaining controllers are developed using state-space multiple-input and multiple-output (MIMO) techniques to explicity account for coupling between loops and to optimize given known frequency structures of the turbine and disturbance. In this first publication from the study, we present the structure of the ongoing controller comparison experiment, the design process for the two controllers compared in this phase, and initial comparison results obtained in field-testing.

17 WIND ENERGY↗

Ordering of Sphere Forming SISO Tetrablock Terpolymers on a Simple Hexagonal Lattice

Hexagonally ordered spherical and cylindrical morphologies (P{sub 6}/mmm and P{sub 6}/mm space group symmetries) have been identified in bulk poly(styrene-b-isoprene-b-styrene-b-ethylene oxide) (SISO) tetrablock terpolymers. These materials were synthesized by adding up to 32% by volume O blocks to a parent hydroxy-terminated SIS triblock copolymer containing 40% S by volume, and the resulting morphologies were characterized by small-angle X-ray scattering, transmission electron microscopy, differential scanning calorimetry and dynamic mechanical spectroscopy. Disordered, spherical and cylindrical phases were documented with increasing O content, where both ordered states exhibit hexagonal symmetry. Theoretical calculations based on a numerical self-consistent field theory for polymers provide crucial insights into the molecular configurations associated with these morphologies. These results offer a new approach to independently control domain shape and packing in block copolymer melts through manipulation of the magnitude and sequencing of the binary segment-segment interactions ({chi}{sub SI} {<=} {chi}{sub SO} << {chi}{sub IO}), which dictate core segregation and the effective interdomain interactions.

36 MATERIALS SCIENCE↗

Quantum theory of multiple-input-multiple-output Markovian feedback with diffusive measurements

Feedback control engineers have been interested in multiple-input-multiple-output (MIMO) extensions of single-input-single-output (SISO) results of various kinds due to its rich mathematical structure and practical applications. An outstanding problem in quantum feedback control is the extension of the SISO theory of Markovian feedback by Wiseman and Milburn [Phys. Rev. Lett. 70, 548 (1993)] to multiple inputs and multiple outputs. Here we generalize the SISO homodyne-mediated feedback theory to allow for multiple inputs, multiple outputs, and arbitrary diffusive quantum measurements. We thus obtain a MIMO framework which resembles the SISO theory and whose additional mathematical structure is highlighted by the extensive use of vector-operator algebra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A state interaction spin-orbit coupling density matrix renormalization group method

We describe a state interaction spin-orbit (SISO) coupling method using density matrix renormalization group (DMRG) wavefunctions and the spin-orbit mean-field (SOMF) operator. We implement our DMRG-SISO scheme using a spin-adapted algorithm that computes transition density matrices between arbitrary matrix product states. To demonstrate the potential of the DMRG-SISO scheme we present accurate benchmark calculations for the zero-field splitting of the copper and gold atoms, comparing to earlier complete active space self-consistent-field and second-order complete active space perturbation theory results in the same basis. We also compute the effects of spin-orbit coupling on the spin-ladder of the iron-sulfur dimer complex [Fe{sub 2}S{sub 2}(SCH{sub 3}){sub 4}]{sup 3−}, determining the splitting of the lowest quartet and sextet states. We find that the magnitude of the zero-field splitting for the higher quartet and sextet states approaches a significant fraction of the Heisenberg exchange parameter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequence Impedance Measurement of Utility-Scale Wind Turbines and Inverters – Reference Frame, Frequency Coupling, and MIMO/SISO Forms

Sequence impedance responses with or without considering frequency coupling in both MIMO and SISO forms are increasingly used for the stability analysis of three-phase power electronic systems; however, many aspects of sequence impedance measurement are not fully explored. It is not clear if the sequence impedance has a reference frame similar to the dq impedance. If so, the role of the grid voltage angle estimation in aligning the sequence impedance reference frame has not been discussed. Additionally, existing methods for measuring the sequence impedance with frequency coupling are complicated, are not feasible for large wind turbines and inverters, and provide the sequence impedance responses in only either MIMO or SISO form. This paper presents a sequence impedance measurement method that considers the frequency coupling, performs reference frame alignment, demonstrates the impact of the grid voltage angle estimation, and obtains the sequence impedance response in both MIMO and SISO forms. This paper demonstrates the proposed method and practical problems associated with the sequence impedance measurement of utility-scale wind turbines and inverters on a 1.9-MW Type III wind turbine and a 2.2-MVA inverter using an impedance measurement system built around a 7-MW/13.8-kV grid simulator and a 5-MW dynamometer.

17 WIND ENERGY↗

Dodecagonal Quasicrystalline Morphology in a Poly(styrene-b-isoprene-b-styrene-b-ethylene oxide) Tetrablock Terpolymer

A dodecagonal quasicrystalline (QC) morphology is identified in a poly(styrene-b-isoprene-b-styrene-b-ethylene oxide) (SISO) tetrablock terpolymer based on evidence provided by transmission electron microscopy (TEM), small-angle X-ray scattering, and dynamic mechanical spectroscopy measurements. The QC state occurs at temperatures between those associated with simple hexagonal order (HEX) and the {sigma}-phase (P4{sub 2}/mnm), T{sub HEX} < T{sub QC} < T{sub {sigma}} < T{sub ODT}, where T{sub ODT} is the order-disorder transition temperature. All three morphologies are formed from spherical domains containing an O core surrounded by a shell of S that screens unfavorable segment-segment interactions with an I-rich matrix. TEM analysis reveals a QC morphology with 12-fold rotational symmetry but devoid of long-range translational order, along with locally coordinated structures consistent with dodecagonal quasicrystalline approximants. The SISO molecular architecture decouples control over the domain shape and interdomain interactions, leading to a multiplicity of packing symmetries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

System ID modern control algorithms for active aerodynamic load control and impact on gearbox loading.

Prior work on active aerodynamic load control (AALC) of wind turbine blades has demonstrated that appropriate use of this technology has the potential to yield significant reductions in blade loads, leading to a decrease in wind cost of energy. While the general concept of AALC is usually discussed in the context of multiple sensors and active control devices (such as flaps) distributed over the length of the blade, most work to date has been limited to consideration of a single control device per blade with very basic Proportional Derivative controllers, due to limitations in the aeroservoelastic codes used to perform turbine simulations. This work utilizes a new aeroservoelastic code developed at Delft University of Technology to model the NREL/Upwind 5 MW wind turbine to investigate the relative advantage of utilizing multiple-device AALC. System identification techniques are used to identify the frequencies and shapes of turbine vibration modes, and these are used with modern control techniques to develop both Single-Input Single-Output (SISO) and Multiple-Input Multiple-Output (MIMO) LQR flap controllers. Comparison of simulation results with these controllers shows that the MIMO controller does yield some improvement over the SISO controller in fatigue load reduction, but additional improvement is possible with further refinement. In addition, a preliminary investigation shows that AALC has the potential to reduce off-axis gearbox loads, leading to reduced gearbox bearing fatigue damage and improved lifetimes.

17 WIND ENERGY↗

Transforming a Simple Structure Model to Represent a Complex Dynamic System with Unknown Boundary Restraints

Imposing a boundary condition on a structure can significantly alter its dynamic properties. However, sometimes the specifics of the new boundary conditions are not known. When the effects of a boundary condition are uncertain or there is not enough information, engineers need to excite the complex structure to obtain these modified properties. In order to experimentally obtain the new properties, engineers need multiple experiments and many outputs for interpolation in order to sufficiently represent the entire structure. In this study, the researchers attached a stinger to a cantilever beam, acting as a new transverse restraint of unknown properties. This paper presents a conversion expression that predicts the dynamic behavior of any point in the system with the new boundary condition. This expression relies only on one impact hammer experiment with one output and the model of the stinger-free cantilever beam, referred to as the simple structure. Researchers estimated the Transfer Function (TRF) of the beam and compared it with an experimentally measured TRF to validate the method. The mean absolute error of the estimated TRF compared to the experimental TRF is 1.99 dB. This demonstrates the use of the proposed method for estimating unmeasured TRFs in a system with an uncertain boundary condition using a single input, single output (SISO) test and a model of the simple structure.

42 ENGINEERING↗

Theoretical Control-Centric Modeling for Precision Model-Based Sliding Mode Control of a Hydraulic Artificial Muscle Actuator

Artificial muscles (AMs) typically rely on pneumatic sources of fluid power. The use of hydraulics can increase the power and force to weight and volume ratios of AM actuators. This paper develops a control-centric third-order single-input single-output (SISO) lumped-parameter dynamic model and sliding mode position controller based on Filippov's principle of equivalent dynamics for a braided hydraulic artificial muscle (HAM) actuator. The model predicts the nonlinear behavior of the HAM free contraction and captures the fluid and actuator nonlinear dynamic interactions in addition to the braid deformation. Model simulations are compared to experimental results for quasi-static pressurization, isometric pressurization, and open-loop square wave commands at 0.25, 0.5, and 1 Hz. Experiments of sine wave tracking at 0.25, 0.5, and 1 Hz and continuous square wave tracking at 0.067 Hz are conducted using a sliding mode controller (SMC) derived from the model. The SMC achieves a steady-state error of 6 μm at multiple setpoints within the actuator's 17 mm stroke. Compared to a proportional-integral-derivative (PID) controller, the SMC root-mean-square (RMS) error, mean error, and absolute maximum error are reduced on average by 53%, 61%, and 44%, respectively, demonstrating the benefit of model-based approaches for controlling HAMs.

42 ENGINEERING↗

Development of a dynamical model and energy analysis for wheel loader

The objective of this paper is to develop a fully integrated model for the wheel loader, including the subsystem dynamics of the engine, drivetrain, working circuit, steering circuit, and vehicle. It leads to a high-order strongly nonlinear system, and all state variables are coupled together to form a Multi-Input and Multi-Output (MIMO) system. A control architecture is proposed to decouple the MIMO system into several Single-Input and Single-Output (SISO) systems. Here, a tracking problem has been formulated to validate this fully integrated model with the field test data. The accuracy of the model is verified by the 2.3% difference between the measured and simulated fuel consumption. Meanwhile, an energy distribution analysis is conducted to reveal the energy consumption and energy loss of each portion of the wheel loader. Such a model can be used to plan the working pattern, guide the driving habits of human operators, or refine the underlying architecture, leading to the ultimate goal of reducing total fuel consumption and improving productivity.

42 ENGINEERING↗

Quantification and prediction of error in MIMO tests

Dynamic testing of systems is most realistic of real-world conditions when multiple input and multiple output (MIMO) techniques are used. To replicate measured environmental conditions, a series of desired outputs (responses) on the system must be realized by inverting the frequency response functions (FRF) matrix for input estimation. System identification is dependent on the number of inputs and outputs, which affect the type of solutions. In input estimation, the auto spectra of the determined inputs are affected by both the auto spectra and cross spectra of the desired outputs. This research evaluates errors and investigates two sources in an experimental setting. The first significant error source is test-to-test variability in FRFs from system identification tests, quantified by magnitude variability from long-duration tests. The second significant error source is the realization of time histories from frequency domain inputs. The spectral content of the realized random process deviates from the desired content and is also quantified. The structure is a linear three-story frame fixed at the base; two inputs are provided uniaxially with the use of suspended electrodynamic shakers. The proposed model for error sources was found to be effective in predicting errors in a SISO (single-input single-output) and a square (2-input 2-output) MIMO test.

Yousef, Odey↗

MODAL CLASSIFICATION: Processing and Anomaly Detection in a Noisy Vibrational Environment

n this report we summarize the development of a model-based detection scheme capable of the on-line detection of structural anomalies applying both system identification methods to extract a modal model and state estimation/detection methods to both detect an anomaly and locate all affected sensor positions specified by measurement location. Background information evolving from a simple single input/single output (SISO) mechanical system introducing the state-space formulation which leads directly to a multiple input/multiple output (MIMO) state-space formulation is discussed.From that representation the modal state-space model is introduced through an eigenvalue-eigenvector formulation leading to a similarity transformation and complex modes. Next the sampled-data state-space system is introduced leading to discrete state-space systems which provide the basis for the system identification methods to follow.

42 ENGINEERING↗

Definition of a Robust Supervisory Control Scheme for Sodium-Cooled Fast Reactors

In this work, an innovative control approach for metal-fueled Sodium-cooled Fast Reactors is proposed. With respect to the classical approach adopted for base-load Nuclear Power Plants, an alternative control strategy for operating the reactor at different power levels by respecting the system physical constraints is presented. In order to achieve a higher operational flexibility along with ensuring that the implemented control loops do not influence the system inherent passive safety features, a dedicated supervisory control scheme for the dynamic definition of the corresponding set-points to be supplied to the PID controllers is designed. In particular, the traditional approach based on the adoption of tabulated lookup tables for the set-point definition is found not to be robust enough when failures of the implemented SISO (Single Input Single Output) actuators occur. Therefore, a feedback algorithm based on the Reference Governor approach, which allows for the optimization of reference signals according to the system operating conditions, is proposed.

Sodium-cooled Fast Reactors, Supervisory control s↗

Full circle mechanical dynamic characterization including experimental modal analysis and finite element analysis

During operation, it was observed that a specific mechanical system experienced undesirable vibration and it became necessary to understand and mitigate this phenomenon. This document investigates the tools, methodology, and results of the dynamic characterization of the system. The characterization makes use of the experimental modal analysis (EMA) methods of single input multiple output (SIMO) and single input single output (SISO). The validity of the theory of reciprocity is confirmed to minimize measurement error, cost, and time of repeat testing. Finite element analysis (FEA) is used in choosing transducer and modal impact locations to adequately characterize the system. Single degree of freedom (SDOF) and multiple degree of freedom (MDOF) curve fitting is used to fully characterize the system’s mode shapes and natural frequencies. The EMA characterization results are used to modify and validate the FEA model so that FEA can be used to model potential structural modifications to the system to mitigate the undesirable vibration. Structural modifications are chosen, implemented, and their effectiveness is quantified using EMA. Finally, a qualitative evaluation of the methodology of FEA validation by EMA and tuning of the model to match the experimental results is discussed.

42 ENGINEERING↗

Considerable contribution of the Montreal Protocol to declining greenhouse gas emissions from the United States

Ozone depleting substances (ODSs) controlled by the Montreal Protocol are potent greenhouse gases (GHGs), as are their substitutes, the hydrofluorocarbons (HFCs). Here we provide for the first time a comprehensive estimate of U.S. emissions of ODSs and HFCs based on precise measurements in discrete air samples from across North America and in the remote atmosphere. Derived emissions show spatial and seasonal variations qualitatively consistent with known uses and largely confirm U.S. Environmental Protection Agency (EPA) national emissions inventories for most gases. The measurement-based results further indicate a substantial decline of ODS emissions from 2008 to 2014, equivalent to ~50% of the CO 2 -equivalent decline in combined emissions of CO 2 and all other long-lived GHGs inventoried by the EPA for the same period. Total estimated CO 2 -equivalent emissions of HFCs were comparable to the sum of ODS emissions in 2014, but can be expected to decline in the future in response to recent policy measures.

54 ENVIRONMENTAL SCIENCES↗

Structural determination of Enzyme-Graphene Nanocomposite Sensor Material

State-of-the-art ultra-sensitive blood glucose-monitoring biosensors, based on glucose oxidase (GOx) covalently linked to a single layer graphene (SLG), will be a valuable next generation diagnostic tool for personal glycemic level management. We report here our observations of sensor matrix structure obtained using a multi-physics approach towards analysis of small-angle neutron scattering (SANS) on graphene-based biosensor functionalized with GOx under different pH conditions for various hierarchical GOx assemblies within SLG. We developed a methodology to separately extract the average shape of GOx molecules within the hierarchical assemblies. The modeling is able to resolve differences in the average GOx dimer structure and shows that treatment under different pH conditions lead to differences within the GOx at the dimer contact region with SLG. The coupling of different analysis methods and modeling approaches we developed in this study provides a universal approach to obtain detailed structural quantifications, for establishing robust structure-property relationships. This is an essential step to obtain an insight into the structure and function of the GOx-SLG interface for optimizing sensor performance.

59 BASIC BIOLOGICAL SCIENCES↗

Continued emissions of carbon tetrachloride from the United States nearly two decades after its phaseout for dispersive uses

National-scale emissions of carbon tetrachloride (CCl 4 ) are derived based on inverse modeling of atmospheric observations at multiple sites across the United States from the National Oceanic and Atmospheric Administration's flask air sampling network. We estimate an annual average US emission of 4.0 (2.0-6.5) Gg CCl 4 y -1 during 2008- 2012, which is almost two orders of magnitude larger than reported to the US Environmental Protection Agency (EPA) Toxics Release Inventory (TRI) (mean of 0.06 Gg y -1 ) but only 8% (3-22%) of global CCl 4 emissions during these years. Emissive regions identified by the observations and consistently shown in all inversion results include the Gulf Coast states, the San Francisco Bay Area in California, and the Denver area in Colorado. Both the observation-derived emissions and the US EPA TRI identified Texas and Louisiana as the largest contributors, accounting for one- to two-thirds of the US national total CCl 4 emission during 2008-2012. These results are qualitatively consistent with multiple aircraft and ship surveys conducted in earlier years, which suggested significant enhancements in atmospheric mole fractions measured near Houston and surrounding areas. Furthermore, the emission distribution derived for CCl 4 throughout the United States is more consistent with the distribution of industrial activities included in the TRI than with the distribution of other potential CCl 4 sources such as uncapped landfills or activities related to population density (e.g., use of chlorine-containing bleach).

54 ENVIRONMENTAL SCIENCES↗