Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILVER 111”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

In situ Oxidation of Ultrathin Silver Films on Ni(111)

Oxidation of silver films of one- and two-monolayer thicknesses on the Ni(111) surface was investigated by low-energy electron microscopy at temperatures of 500 and 600 K. Additionally, intensity-voltage curves were measured in situ during oxidation to reveal the local film structure on a nanometer scale. At both temperatures, we find that exposure to molecular oxygen leads to the destabilization of the Ag film with subsequent relocation of the silver atoms to small few-layer-thick silver patches and concurrent evolution of NiO(111) regions. Subsequent exposure of the oxidized surface to ethylene initiates the transformation of bilayer islands back into monolayer islands, demonstrating at least partial reversibility of the silver relocation process at 600 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Triphenylene‐Derived Electron Acceptors and Donors on Ag(111): Formation of Intermolecular Charge‐Transfer Complexes with Common Unoccupied Molecular States

Abstract Over the past years, ultrathin films consisting of electron donating and accepting molecules have attracted increasing attention due to their potential usage in optoelectronic devices. Key parameters for understanding and tuning their performance are intermolecular and molecule–substrate interactions. Here, the formation of a monolayer thick blend of triphenylene‐based organic donor and acceptor molecules from 2,3,6,7,10,11‐hexamethoxytriphenylene (HAT) and 1,4,5,8,9,12‐hexaazatriphenylenehexacarbonitrile (HATCN), respectively, on a silver (111) surface is reported. Scanning tunneling microscopy and spectroscopy, valence and core level photoelectron spectroscopy, as well as low‐energy electron diffraction measurements are used, complemented by density functional theory calculations, to investigate both the electronic and structural properties of the homomolecular as well as the intermixed layers. The donor molecules are weakly interacting with the Ag(111) surface, while the acceptor molecules show a strong interaction with the substrate leading to charge transfer and substantial buckling of the top silver layer and of the adsorbates. Upon mixing acceptor and donor molecules, strong hybridization occurs between the two different molecules leading to the emergence of a common unoccupied molecular orbital located at both the donor and acceptor molecules. The donor acceptor blend studied here is, therefore, a compelling candidate for organic electronics based on self‐assembled charge‐transfer complexes.

Müller, Kathrin↗

Nuclear Data Sheets for A = 111

This evaluation for A = 111 updates one by J. Blachot, (2003Bl10), published in Nuclear Data Sheets 100, 179 (2003)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Control of long-distance motion of single molecules on a surface

Spatial control over molecular movement is typically limited because motion at the atomic scale follows stochastic processes. Here, we used scanning tunneling microscopy to bring single molecules into a stable orientation of high translational mobility where they moved along precisely defined tracks. Single dibromoterfluorene molecules moved over large distances of 150 nanometers with extremely high spatial precision of 0.1 angstrom across a silver (111) surface. The electrostatic nature of the effect enabled the selective application of repulsive and attractive forces to send or receive single molecules. The high control allows us to precisely move an individual and specific molecular entity between two separate probes, opening avenues for velocity measurements and thus energy dissipation studies of single molecules in real time during diffusion and collision.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ultrathin Silver Films on Ni(111)

The growth and atomic structure of ultrathin silver films on Ni(111) was investigated by low-energy electron microscopy and diffraction (LEEM/LEED) as well as intensity-voltage [I(V)]-LEEM in the growth temperature range between 470 and 850 K. We find that silver grows in a Stranski-Krastanov mode with a two monolayer thin wetting layer which takes on a p(7 x 7) reconstruction at temperatures lower than 700 K and a ({radical}52 x {radical}52)R13.9{sup o} reconstruction at higher temperatures. The occurrence of the two distinct reconstructions is shown to have profound implications for the growth characteristics of films exhibiting thicknesses of one and two monolayers. The nanoscale I(V) characteristics of the films were analyzed by means of multiple-scattering calculations based on dynamical LEED theory. Furthermore, the vertical interatomic spacing at the interface between the Ag film and the Ni substrate was determined to (2.8 {+-} 0.1) {angstrom} for all film thicknesses (<13 ML) while the uppermost silver layer relaxes by about (4 {+-} 1)% toward the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrathin Silver Films on Ni(111)

The growth and atomic structure of ultrathin silver films on Ni(111) was investigated by low-energy electron microscopy and diffraction (LEEM/LEED) as well as intensity-voltage [I(V)]-LEEM in the growth temperature range between 470 and 850 K. We find that silver grows in a Stranski-Krastanov mode with a two monolayer thin wetting layer which takes on a p(7 x 7) reconstruction at temperatures lower than 700 K and a ({radical}52 x {radical}52)R13.9{sup o} reconstruction at higher temperatures. The occurrence of the two distinct reconstructions is shown to have profound implications for the growth characteristics of films exhibiting thicknesses of one and two monolayers. The nanoscale I(V) characteristics of the films were analyzed by means of multiple-scattering calculations based on dynamical LEED theory. Furthermore, the vertical interatomic spacing at the interface between the Ag film and the Ni substrate was determined to (2.8 {+-} 0.1) {angstrom} for all film thicknesses (<13 ML) while the uppermost silver layer relaxes by about (4 {+-} 1)% toward the crystal.

36 MATERIALS SCIENCE↗

Temperature-dependent templated growth of porphine thin films on the (111) facets of copper and silver

The templated growth of the basic porphyrin unit, free-base porphine (2H-P), is characterized by means of X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine-structure (NEXAFS) spectroscopy measurements and density functional theory (DFT). The DFT simulations allow the deconvolution of the complex XPS and NEXAFS signatures into contributions originating from five inequivalent carbon atoms, which can be grouped into C–N and C–C bonded species. Polarization-dependent NEXAFS measurements reveal an intriguing organizational behavior: On both Cu(111) and Ag(111), for coverages up to one monolayer, the molecules adsorb undeformed and parallel to the respective metal surface. Upon increasing the coverage, however, the orientation of the molecules in the thin films depends on the growth conditions. Multilayers deposited at low temperatures exhibit a similar average tilting angle (30° relative to the surface plane) on both substrates. Conversely, for multilayers grown at room temperature a markedly different scenario exists. On Cu(111) the film thickness is self-limited to a coverage of approximately two layers, while on Ag(111) multilayers can be grown easily and, in contrast to the bulk 2H-P crystal, the molecules are oriented perpendicular to the surface. This difference in molecular orientation results in a modified line-shape of the C 1s XPS signatures, which depends on the incident photon energy and is explained by comparison with depth-resolved DFT calculations. Simulations of ionization energies for differently stacked molecules show no indication for a packing-induced modification of the multilayer XP spectra, thus indicating that the comparison of single molecule calculations to multilayer data is justified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photodissociation of CH{sub 3}Cl, C{sub 2}H{sub 5}Cl, and C{sub 6}H{sub 5}Cl on the Ag(111) surface: Ab initio embedded cluster and configuration interaction study

We report a comparative study of the photoinduced C-Cl bond cleavage in three Rd-Cl molecules (Rd=CH{sub 3}, C{sub 2}H{sub 5}, and C{sub 6}H{sub 5} radicals) on the Ag(111) surface. The ground, lowest excited states as well as anion states of adsorbed molecules have been computed at their equilibrium geometry and along the C-Cl dissociation pathway using the ab initio embedded cluster and multireference configuration interaction methods. The anion state can be formed by photoinduced electron transfer from the substrate to an adsorbate and is strongly bound to the surface in contrast with the electronic states of the adsorbate itself, which are only weakly perturbed by the silver surface. The excitation energy of the anion state lies lower in the Franck-Condon region than that of the lowest singlet excited state for all adsorbates and correlates directly with the dissociation products: adsorbed chlorine atom and the gas phase or adsorbed radical for Rd=CH{sub 3}, C{sub 2}H{sub 5}, and C{sub 6}H{sub 5}, respectively. The computed redshift of the photodissociation spectrum for the substrate-mediated photodissociation process relative to the corresponding gas-phase reaction is {approx}2 eV for CH{sub 3}Cl and C{sub 2}H{sub 5}Cl, and {approx}1 eV for C{sub 6}H{sub 5}Cl, which result is in good agreement with experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

State-resolved investigation of the photodesorption dynamics of NO from (NO){sub 2} on Ag nanoparticles of various sizes in comparison with Ag(111)

The translational and internal state energy distributions of NO desorbed by laser light (2.3, 3.5, and 4.7 eV) from adsorbed (NO){sub 2} on Ag nanoparticles (NPs) (mean diameters, D= 4, 8, and 11 nm) have been investigated by the (1 + 1) resonance enhanced multiphoton ionization technique. For comparison, the same experiments have also been carried out on Ag(111). Detected NO molecules are hyperthermally fast and both rotationally and vibrationally hot, with temperatures well above the sample temperature. The translational and rotational excitations are positively correlated, while the vibrational excitation is decoupled from the other two degrees of freedom. Most of the energy content of the desorbing NO is contained in its translation. The translational and internal energy distributions of NO molecules photodesorbed by 2.3, 3.5, and in part also 4.7 eV light are approximately constant as a function of Ag NPs sizes, and they are the same on Ag(111). This suggests that for these excitations a common mechanism is operative on the bulk single crystal and on NPs, independent of the size regime. Notably, despite the strongly enhanced cross section seen on NP at 3.5 eV excitation energy in p-polarization, i.e., in resonance with the plasmon excitation, the mechanism is also unchanged. At 4.7 eV and for small particles, however, an additional desorption channel is observed which results in desorbates with higher energies in all degrees of freedom. The results are well compatible with our earlier measurements of size-dependent translational energy distributions. We suggest that the broadly constant mechanism over most of the investigated range runs via a transient negative ion state, while at high excitation energy and for small particles the transient state is suggested to be a positive ion.

36 MATERIALS SCIENCE↗

Molybdenum and silver photoemission survey spectra from hard x-rays

Electron emission from thick polished samples of polycrystalline molybdenum (Mo) and single crystalline $\langle$111$\rangle$ silver (Ag) was measured with hard x-ray photoemission spectroscopy. Six different excitation x-ray energies were used, nominally 8.0, 11.0, 13.0, 15.0, 18.0, and 21.5 keV. Survey spectra were recorded with each excitation to a kinetic energy of at most 15 keV, often capturing the entire emission range. The Mo 1s core peak was measured. Detailed LMM Auger spectra of Mo show marked increases in intensity and altered shape when x-ray energy exceeds the Mo 1s binding energy. The Mo and Ag L-shell photoelectron peaks are measured at four x-ray energies up to 18 keV showing the transition from 2p3/2 to 2s photoionization dominance.

47 OTHER INSTRUMENTATION↗

Diffusion of silver over atomically clean silicon surfaces

The diffusion of silver the (111), (100), and (110) silicon surfaces is studied by Auger electron spectroscopy and low-energy electron diffraction. The mechanisms of diffusion over the (111) and (110) surfaces are revealed, and the temperature dependences of diffusion coefficients are measured. An anisotropy of silver diffusion over the (110) surface is detected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial Electrodeposition of Wide Bandgap Cuprous Bromide on Silver via a Silver Bromide Buffer Layer

Cuprous halides are an important class of wide bandgap p-type semiconductors used in opto-electronics. Cuprous bromide (CuBr) shows potential for short-wavelength devices due to a large exciton binding energy (108 meV) and near-ultraviolet bandgap (3.1 eV). However, the growth of high-quality epitaxial CuBr films by electrodeposition has remained a challenge. Here, we introduce a low-cost electrochemical procedure for producing epitaxial CuBr(111) on a Ag(111) substrate by a [111]-oriented silver bromide (AgBr) buffer layer. The AgBr buffer layer forms during the electrodeposition of the CuBr. The mismatch between CuBr(111) and AgBr(111) is –1.3%. A plausible mechanism for nucleation and growth of the epitaxial CuBr is proposed. X-ray techniques including high resolution X-ray diffraction and X-ray pole figures are used to determine the epitaxial relationship. CuBr(100) is also produced on a Ag(100) surface by a AgBr(100) buffer layer that is rotated in-plane 45° relative to the Ag(100) surface. In conclusion, this in-plane rotation reduces the lattice mismatch from +39.5% for an unrotated film to –1.4% for a 45° rotated film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The fate of the 2√3 × 2√3R(30°) silicene phase on Ag(111)

Silicon atoms deposited on Ag(111) produce various single layer silicene sheets with different buckling patterns and periodicities. Low temperature scanning tunneling microscopy reveals that one of the silicene sheets, the hypothetical √7 × √7 silicene structure, on 2√3 × 2√3 Ag(111), is inherently highly defective and displays no long-range order. Moreover, Auger and photoelectron spectroscopy measurements reveal its sudden death, to end, in a dynamic fating process at ∼300 °C. This result clarifies the real nature of the 2√3 × 2√3R(30°) silicene phase and thus helps to understand the diversity of the silicene sheets grown on Ag(111)

36 MATERIALS SCIENCE↗

Seleno groups control the energy-level alignment between conjugated organic molecules and metals

The charge injection from metallic electrodes into hole transporting layers of organic devices often suffers from deviations from vacuum-level alignment at the interface. Even for weakly interacting cases, Pauli repulsion causes an interface dipole between the metal and conjugated organic molecules (COMs) (so called “push-back” or “cushion” effect), which leads notoriously to an increase of the hole injection barrier. On the other hand, for chalcogenol self assembled monolayers (SAMs) on metal surfaces, chemisorption via the formation of chalcogen-metal bonds is commonly observed. In these cases, the energy-level alignment is governed by chalcogen-derived interface states in the vicinity of the metal Fermi-level. In this work, we present X-ray and ultraviolet photoelectron spectroscopy data that demonstrate that the interfacial energy-level alignment mechanism found for chalcogenol SAMs also applies to seleno-functionalized COMs. This can be exploited to mitigate the push-back effect at metal contacts, notably also when COMs with low ionization energies are employed, permitting exceedingly low hole injection barriers, as shown here for the interfaces of tetraseleno-tetracene with Au(111), Ag(111), and Cu(111)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Site-specific dissociation dynamics of H{sub 2}/D{sub 2} on Ag(111) and Co(0001) and the validity of the site-averaging model

Dissociative chemisorption of polyatomic molecules on metal surfaces involves high-dimensional dynamics, of which quantum mechanical treatments are computationally challenging. A promising reduced-dimensional approach approximates the full-dimensional dynamics by a weighted average of fixed-site results. To examine the performance of this site-averaging model, we investigate two distinct reactions, namely, hydrogen dissociation on Co(0001) and Ag(111), using accurate first principles potential energy surfaces (PESs). The former has a very low barrier of ∼0.05 eV while the latter is highly activated with a barrier of ∼1.15 eV. These two systems allow the investigation of not only site-specific dynamical behaviors but also the validity of the site-averaging model. It is found that the reactivity is not only controlled by the barrier height but also by the topography of the PES. Moreover, the agreement between the site-averaged and full-dimensional results is much better on Ag(111), though quantitative in neither system. Further quasi-classical trajectory calculations showed that the deviations can be attributed to dynamical steering effects, which are present in both reactions at all energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effect of the Deformation Parameter on the Cross Sections for Reactions: {sup 110}Pd(d,n){sup 111}Ag and {sup 110}Pd(d, 2n){sup 110m}Ag

In this study, we focused on the effects of the deformation parameter on the cross sections. First, the deformation parameters of target nucleus {sup 110}Pd was determined within the interacting boson model (IBM). Later this parameter was used in the TALYS-1.8 code to calculate the cross sections of the {sup 110}Pd(d,n){sup 111}Ag and {sup 110}Pd(d, 2n){sup 110m}Ag reactions. Moreover, other deformation parameters obtained RIPL-3 and TALYS default were used for the cross section calculation. The calculated results were compared with the experimental nuclear reaction data from EXFOR.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Many-body dispersion effects in the binding of adsorbates on metal surfaces

A correct description of electronic exchange and correlation effects for molecules in contact with extended (metal) surfaces is a challenging task for first-principles modeling. In this work, we demonstrate the importance of collective van der Waals dispersion effects beyond the pairwise approximation for organic–inorganic systems on the example of atoms, molecules, and nanostructures adsorbed on metals. We use the recently developed many-body dispersion (MBD) approach in the context of density-functional theory [Tkatchenko et al., Phys. Rev. Lett. 108, 236402 (2012) and Ambrosetti et al., J. Chem. Phys. 140, 18A508 (2014)] and assess its ability to correctly describe the binding of adsorbates on metal surfaces. We briefly review the MBD method and highlight its similarities to quantum-chemical approaches to electron correlation in a quasiparticle picture. In particular, we study the binding properties of xenon, 3,4,9,10-perylene-tetracarboxylic acid, and a graphene sheet adsorbed on the Ag(111) surface. Accounting for MBD effects, we are able to describe changes in the anisotropic polarizability tensor, improve the description of adsorbate vibrations, and correctly capture the adsorbate–surface interaction screening. Comparison to other methods and experiment reveals that inclusion of MBD effects improves adsorption energies and geometries, by reducing the overbinding typically found in pairwise additive dispersion-correction approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

van der Waals density functionals built upon the electron-gas tradition: Facing the challenge of competing interactions

The theoretical description of sparse matter attracts much interest, in particular for those ground-state properties that can be described by density functional theory. One proposed approach, the van der Waals density functional (vdW-DF) method, rests on strong physical foundations and offers simple yet accurate and robust functionals. A very recent functional within this method called vdW-DF-cx [K. Berland and P. Hyldgaard, Phys. Rev. B 89, 035412 (2014)] stands out in its attempt to use an exchange energy derived from the same plasmon-based theory from which the nonlocal correlation energy was derived. Encouraged by its good performance for solids, layered materials, and aromatic molecules, we apply it to several systems that are characterized by competing interactions. These include the ferroelectric response in PbTiO{sub 3}, the adsorption of small molecules within metal-organic frameworks, the graphite/diamond phase transition, and the adsorption of an aromatic-molecule on the Ag(111) surface. Our results indicate that vdW-DF-cx is overall well suited to tackle these challenging systems. In addition to being a competitive density functional for sparse matter, the vdW-DF-cx construction presents a more robust general-purpose functional that could be applied to a range of materials problems with a variety of competing interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗