Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICON 41”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A = 41

Available information pertaining to the nuclear structure of all nuclei with mass numbers A=41 ranging from Al (Z=13) to Ti (Z=22) are presented. The experimental reaction and decay data are evaluated and any inconsistencies or discrepancies are noted. The adopted values for various level properties (such as the spin, parity and and halflife) and gamma properties (energy, intensity and multipole character) are given. Since the prior evaluation several new measurements have expanded our knowledge of A=41 nuclides. The half-life of the ground state of {sup 41}Si has been determined and a single excited state identified. Excited levels in {sup 41}P have been observed for the first time. In {sup 41}Cl, seven new excited states have been identified in deep inelastic and heavy ion transfer reactions. Half-lifes for four states in {sup 41}Ar have been updated and additional levels with gammas have been included from a new measurement using the multiple ion transfer reaction. In {sup 41}Ca via charge-exchange reaction measurements, several new excited states were observed. A number of new resonances in {sup 41}K have been identified via the (p,γ) reaction. There remains a significant discrepancy in the half-life of the first excited state (980 keV) in {sup 41}K, with measurements differing by more than an order of magnitude. Transfer reactions suggest that this M1 transition should be l-forbidden, however, several measurements yield a lifetime which suggests a sizable M1 strength. Further measurements to resolve the current conflicts would be beneficial.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structure of the N=27 isotones derived from the {sup 44}Ar(d,p){sup 45}Ar reaction

The {sup 44}Ar(d,p){sup 45}Ar neutron transfer reaction was performed at 10A MeV. Measured excitation energies, deduced angular momenta, and spectroscopic factors of the states populated in {sup 45}Ar are reported. A satisfactory description of these properties is achieved in the shell model framework using a new sdpf interaction. The model analysis is extended to more exotic even-Z nuclei down to {sub 14}{sup 41}Si{sub 27} to study how collectivity impacts the low-lying structure of N=27 neutron-rich nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New Methods for the Determination of Total Radiative Thermal Neutron Capture Cross Sections

Precise gamma-ray thermal neutron capture cross sections have been measured at the Budapest Reactor for all elements with Z = 1-83,92 except for He and Pm. These measurements and additional data from the literature been compiled to generate the Evaluated Gamma-ray Activation File (EGAF), which is disseminated by LBNL and the IAEA. These data are nearly complete for most isotopes with Z<20 so the total radiative thermal neutron capture cross sections can be determined directly from the decay scheme. For light isotopes agreement with the recommended values is generally satisfactory although large discrepancies exist for {sup 11}B, {sup 12,13}C, {sup 15}N, {sup 28,30}Si, {sup 34}S, {sup 37}Cl, and {sup 40,41}K. Neutron capture decay data for heavier isotopes are typically incomplete due to the contribution of unresolved continuum transitions so only partial radiative thermal neutron capture cross sections can be determined. The contribution of the continuum to the neutron capture decay scheme arises from a large number of unresolved levels and transitions and can be calculated by assuming that the fluctuations in level densities and transition probabilities are statistical. We have calculated the continuum contribution to neutron capture decay for the palladium isotopes with the Monte Carlo code DICEBOX. These calculations were normalized to the experimental cross sections deexciting low excitation levels to determine the total radiative thermal neutron capture cross section. The resulting palladium cross sections values were determined with a precision comparable to the recommended values even when only one gamma-ray cross section was measured. The calculated and experimental level feedings could also be compared to determine spin and parity assignments for low-lying levels.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

ISOCHRONS IN PRESOLAR GRAPHITE GRAINS FROM ORGUEIL

Primitive meteorites contain tiny dust grains that condensed in stellar outflows and explosions. These stardust grains can be extracted from their host meteorites and studied in detail in the laboratory. We investigated depth profiles of the Al-Mg, Ca-K, and Ti-Ca isotopic systems obtained during NanoSIMS isotopic analysis of presolar graphite grains from the CI carbonaceous meteorite Orgueil. Large {sup 26}Al/{sup 27}Al, {sup 41}Ca/{sup 40}Ca, and {sup 44}Ti/{sup 48}Ti ratios, inferred from {sup 26}Mg, {sup 41}K, and {sup 44}Ca excesses from the decay of the short-lived radioisotopes {sup 26}Al, {sup 41}Ca, and {sup 44}Ti, indicate a supernova (SN) origin. From the depth distribution of the radiogenic isotopes and the stable isotopes of their parent elements we constructed isochron-type correlation plots. The plots indicate quantitative retention of radiogenic {sup 26}Mg, {sup 41}K, and {sup 44}Ca in most grains. Deviations from straight lines in the Al-Mg and Ca-K plots can be explained by contamination with {sup 27}Al and isotopically normal Ca, respectively. For the Ti-Ca system in some grains, the lack of parent-daughter correlation indicates either redistribution of radiogenic {sup 44}Ca or heterogeneity in the initial {sup 44}Ti/{sup 48}Ti ratio. We also obtained Si isotopic depth profiles in three graphite grains with large {sup 29}Si and {sup 30}Si excesses, for which a SN origin has been proposed. In two grains no Si-rich subgrains are observed; in the third grain with an apparent Si-rich subgrain the anomalous Si isotopic ratios in the subgrain are the same as in the rest of the graphite host. Our studies show that by measuring depth profiles, information on presolar grains can be obtained that cannot be obtained by whole-grain analysis.

79 ASTRONOMY AND ASTROPHYSICS↗

Amorphization and reduction of thermal conductivity in porous silicon by irradiation with swift heavy ions

In this article, we demonstrate that the thermal conductivity of nanostructured porous silicon is reduced by amorphization and also that this amorphous phase in porous silicon can be created by swift (high-energy) heavy ion irradiation. Porous silicon samples with 41%-75% porosity are irradiated with 110 MeV uranium ions at six different fluences. Structural characterisation by micro-Raman spectroscopy and SEM imaging show that swift heavy ion irradiation causes the creation of an amorphous phase in porous Si but without suppressing its porous structure. We demonstrate that the amorphization of porous silicon is caused by electronic-regime interactions, which is the first time such an effect is obtained in crystalline silicon with single-ion species. Furthermore, the impact on the thermal conductivity of porous silicon is studied by micro-Raman spectroscopy and scanning thermal microscopy. The creation of an amorphous phase in porous silicon leads to a reduction of its thermal conductivity, up to a factor of 3 compared to the non-irradiated sample. Therefore, this technique could be used to enhance the thermal insulation properties of porous Si. Finally, we show that this treatment can be combined with pre-oxidation at 300 Degree-Sign C, which is known to lower the thermal conductivity of porous Si, in order to obtain an even greater reduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamics of the reaction C({sup 3}P)+SiH{sub 4}: Experiments and calculations

We conducted the reaction C({sup 3}P)+SiH{sub 4} at a collision energy of 4.0 kcal mol{sup -1} in a crossed molecular-beam apparatus measuring time-of-flight mass spectra and selective photoionization. Product ions with m/z=41-43 are associated with two product channels, H{sub 2}SiCH/HSiCH{sub 2}/SiCH{sub 3}+H and H{sub 2}SiC/HSiCH/SiCH{sub 2}+H{sub 2}. Apart from daughter ions and isotopic variants of reaction products, the species observed at m/z=43 is assigned to product H{sub 2}SiCH/HSiCH{sub 2}/SiCH{sub 3} and that at m/z=42 to product H{sub 2}SiC/HSiCH/SiCH{sub 2}. The signals observed at m/z=41 are due to dissociative ionization of silicon-carbon hydrides of these two types. We report time-of-flight spectra of products at specific laboratory angles and theoretical simulations, from which both kinetic-energy and angular distributions of products in the center-of-mass frame were derived. The release of kinetic energy is weakly dependent on the scattering angle for these two reactions. The channels for loss of H and H{sub 2} release average translational energies of 10.5 and 16.7 kcal mol{sup -1}, respectively. As hydrogen transfer before decomposition is facile, products H{sub 2}SiCH/HSiCH{sub 2}/SiCH{sub 3} and H{sub 2}SiC/HSiCH/SiCH{sub 2} exhibit mildly forward/backward preferred and isotropic angular distributions, respectively. We estimate the branching ratios of these channels for loss of H and H{sub 2} to be roughly 6:4. The measurements of release of kinetic energy and ionization thresholds of products indicate that SiCH{sub 3}({sup 2}A{sup ''}) and SiCH{sub 2}({sup 3}A{sub 2}) are dominant among isomeric products. To explore the reaction mechanism, we computed the potential-energy surfaces for the reaction C({sup 3}P)+SiH{sub 4}. The most likely mechanism is that atom C {sup 3}P inserts into bond Si-H of SiH{sub 4} in the entrance channel, and the reaction complex H{sub 3}SiCH subsequently isomerizes to HSiCH{sub 3} followed by decomposition to SiCH{sub 3}({sup 2}A{sup ''})+H and SiCH{sub 2}({sup 3}A{sub 2})+H{sub 2}. We observed no significant evidence for the reaction C({sup 1}D)+SiH{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrometry by optical charge conversion of deep defects in 4H-SiC

Optically active point defects in various host materials, such as diamond and silicon carbide (SiC), have shown significant promise as local sensors of magnetic fields, electric fields, strain, and temperature. Modern sensing techniques take advantage of the relaxation and coherence times of the spin state within these defects. Here we show that the defect charge state can also be used to sense the environment, in particular high-frequency (megahertz to gigahertz) electric fields, complementing established spin-based techniques. This is enabled by optical charge conversion of the defects between their photoluminescent and dark charge states, with conversion rate dependent on the electric field (energy density). The technique provides an all-optical high-frequency electrometer which is tested in 4H-SiC for both ensembles of divacancies and silicon vacancies, from cryogenic to room temperature, and with a measured sensitivity of 41±8(V/cm) 2 /√Hz. In conclusion, due to the piezoelectric character of SiC, we obtain spatial 3D maps of surface acoustic wave modes in a mechanical resonator.

36 MATERIALS SCIENCE↗

Tuning Porosity and Surface Area in Mesoporous Silicon for Application in Li-Ion Battery Electrodes

This work aims to improve the poor cycle lifetime of silicon-based anodes for Li-ion batteries by tuning microstructural parameters such as pore size, pore volume, and specific surface area in chemically synthesized mesoporous silicon. In this paper, we have specifically produced two different mesoporous silicon samples from the magnesiothermic reduction of ordered mesoporous silica in either argon or forming gas. In situ X-ray diffraction studies indicate that samples made in Ar proceed through a Mg 2 Si intermediate, and this results in samples with larger pores (diameter ≈ 90 nm), modest total porosity (34%), and modest specific surface area (50 m 2 g –1 ). Reduction in forming gas, by contrast, results in direct conversion of silica to silicon, and this produces samples with smaller pores (diameter ≈ 40 nm), higher porosity (41%), and a larger specific surface area (70 m 2 g –1 ). The material with smaller pores outperforms the one with larger pores, delivering a capacity of 1121 mAh g –1 at 10 A g –1 and retains 1292 mAh g –1 at 5 A g –1 after 500 cycles. For comparison, the sample with larger pores delivers a capacity of 731 mAh g –1 at 10 A g –1 and retains 845 mAh g –1 at 5 A g –1 after 500 cycles. The dependence of capacity retention and charge storage kinetics on the nanoscale architecture clearly suggests that these microstructural parameters significantly impact the performance of mesoporous alloy type anodes. Our work is therefore expected to contribute to the design and synthesis of optimal mesoporous architectures for advanced Li-ion battery anodes.

25 ENERGY STORAGE↗

Advances in Coring Procedures of Silicon Photovoltaic Modules

We describe advances on procedures used for the coring of silicon photovoltaic modules. These procedures involve coring specific locations, starting from the back of the modules, and removing selected parts of the cell structure, while preserving the front tempered glass. The standard coring procedures had to be modified from case to case due to the different cell structures and measurement requirements. We provide examples of the characterization of the cored samples by scanning electron microscopy and energy-dispersive X-ray spectroscopy. Finally, we describe a simple process to create small openings at specific locations on the back of photovoltaic modules to allow for efficiency-related measurement of individual cells and groups of cells.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Local Resistance Profiling of Ultra Shallow Junction Annealed with Combination of Spike Lamp and Laser Annealing Processes using Scanning Spreading Resistance Microscope

Local resistance profiles of ultra shallow boron and arsenic implanted into silicon with energies of 2.0 and 4.0 keV and doses of 2.0x10{sup 15} and 1.0x10{sup 15} ions/cm{sup 2} activated by a combination of conventional spike lamp and laser annealing processes were measured by scanning spreading resistance microscope (SSRM) with a depth resolution of less than 10 nm. The lowest local resistance at the low resistance region in 2.0 keV boron implanted silicon with 1050 deg. C spike lamp annealing followed by 0.35 kW/mm{sup 2} laser annealing was half of that without laser annealing. The lowest local resistance at the low resistance region in the arsenic implanted silicon activated by 1050 deg. C spike lamp annealing followed by 0.39 kW/mm{sup 2} laser annealing was 74% lower than that followed by 0.36 kW/mm{sup 2} laser annealing. The lowest local resistances at the low resistance regions in the arsenic implanted silicon with 0.36 and 0.39 kW/mm{sup 2} laser annealing followed by 1050 deg. C spike lamp annealing were 41 and 33% lower than those with spike lamp annealing followed by laser annealing. Laser annealing followed by spike lamp annealing could suppress the diffusion of the impurities and was suitable for making the ultra shallow and low resistance regions.

36 MATERIALS SCIENCE↗

Proton branching ratios in 22 Mg for X-ray bursts

Here, decay protons from 22 Mg energy levels populated through a previously reported 24 Mg(p, t) 22 Mg transfer reaction (Chae et al. in Phys Rev C 79:055804, 2009) have been analyzed for proton branching ratios as a follow-up analysis. The measurement was performed at the Holifield Radioactive Ion Beam Facility of Oak Ridge National Laboratory by utilizing 41-MeV proton beams and 24 Mg solid targets. Decay protons and reaction tritons were simultaneously detected with a silicon detector array. By investigating the 24 Mg(p, t) 22 Mg*(p) 21 Na channels, the proton branching ratios of five 22 Mg excited states were obtained. The measured branching ratios provide constraints on the proton partial widths of the populated 22 Mg levels, which have implications for X-ray burst nucleosynthesis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-Quality Indium Phosphide Films and Nano-Network Grown Using Low-Cost Metal-Catalyzed Vapor-Liquid-Solid Method for Photovoltaic Applications

Growth of high-quality InP film is demonstrated by directly co-evaporating elemental In and P in a simple low-cost chemical vapor deposition (CVD) reactor. By exploring the interplay between the metal-assisted vapor–liquid–solid and vapor–solid mechanisms, the authors present the growth of highly stoichiometric InP thin films or nano-network in a wide range of growth temperature from 560 to 720 °C. Photoluminescence (PL) measurements reveal high optical quality of the as-grown InP film with PL bandwidth (≈49 meV) comparable to commercial InP wafer (≈41 meV). The versatility of this approach is demonstrated through successful growth of thin films on diverse substrates such as silicon, InP, and fused quartz. Additionally, the effects of catalysts are also studied by comparing growths based on Au-catalyst with In-self-catalyst (without Au). The temperature dependence study of Au-catalyzed growth shows that higher growth temperature results in formation of larger grain sizes and continuous void-free polycrystalline InP films. Preliminary solar cell devices are fabricated on a p-type silicon with an indium-tin-oxide contact layer. It is believed that the new growth strategy provides a simpler, lower cost (both precursors and substrates) approach for producing high-quality InP thin film for the fabrication of high efficiency, low-cost solar cells.

36 MATERIALS SCIENCE↗

Education Highlights: Synthetic Nanoparticles

Argonne intern Francesca Gambacorta from University of Illinois at Urbana–Champaign worked with Argonne mentor Phil Laible and Postdoctoral mentor Martyna Michalska to study how black silicon, a synthetic nanomaterial, kills bacteria. This research will help scientists predict other applications of this material in the biomedical field. Argonne aims to develop the next generation of scientists, researchers, and engineers by mentoring over 300 undergraduate and graduate students a year from over 40 STEM majors in over 15 different career development programs. Students come from over 160 colleges and universities in 41 states and 15 countries.

60 APPLIED LIFE SCIENCES↗

Effect of transition element doping on crystal structure of rare earth borosilicides REB{sub 44}Si{sub 2}

On a previous study on samples of doped-YB{sub 44}Si{sub 2}, an improvement of thermoelectric properties has been achieved. Regarding the interesting effect of the doping of transition elements on the thermoelectric properties, a single crystal study has been carried out on Zn doped, Rh doped and Ni doped samples to assess how the transition element doping affects the crystal structure. Refinements were carried out based on the structural model solution of YB{sub 44}Si{sub 2} reported in a previous study. Variations in the silicon contents were found in the doped single crystals. Splitting of partially occupied sites has also been detected for some of the doped samples. In this paper we present differences in the partial occupations of boron and silicon sites. Possibility of transition elements insertions based on the differences in crystal structures will be presented. - Graphical Abstract: New transition elements doped YB{sub 44}Si{sub 2} were synthesized and have nominal compositions YB{sub 41.1}Si{sub 1.1}Rh{sub 0.02} and YB{sub 41}Si{sub 1.3}Ni{sub 0.06}. Insertion of transition elements into the crystal structure of YB{sub 44}Si{sub 2} leads to the transformation of B{sub 12} icosahedra into B{sub 11} polyhedrons for a few percent of them. Highlights: > Differences in the partial occupations of boron and silicon sites{yields}Possibility of transition elements insertions. > Mixed occupancy of split positions. > Insertion of transition elements between B{sub 12} icosahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isolating p- and n-Doped Fingers With Intrinsic Poly-Si in Passivated Interdigitated Back Contact Silicon Solar Cells

Polycrystalline silicon on silicon oxide (poly-Si/SiO x ) passivating contacts enable ultra high efficiency interdigitated back contact silicon solar cells. To prevent shunt between n- and p-type doped fingers, an insulating region is required between them. We evaluate the use of intrinsic poly Si for this isolation region. Interdigitated fingers were formed by plasma deposition of doped hydrogenated amorphous silicon through mechanically aligned shadow masks, on top of a full-area intrinsic amorphous silicon layer. High temperature annealing then crystallized the a-Si:H to poly Si and drove in the dopants. Two mechanisms were identified which cause contamination of the intrinsic poly Si gap during processing. During deposition of doped fingers, we show using secondary ion mass spectrometry and conductivity measurements that the intrinsic gap becomes contaminated by doped a-Si:H tails several nanometers thick to concentrations of ~10 20 cm -3 . Another source of contamination occurs during high-temperature annealing, where dopants desorb from doped regions and readsorb onto intrinsic a Si:H. Both pathways reduce the resistivity of the intrinsic gap from ~10 5 Ω·cm to ~10 -1 Ω·cm. We show that plasma etching of the a-Si:H surface before crystallizing with a capping layer can eliminate the contamination of the intrinsic poly-Si, maintaining a resistivity of ~10 5 Ω·cm. Lastly, this demonstrates masked plasma deposition as a dopant patterning method for Si solar cells.

14 SOLAR ENERGY↗

Synchrotron applications of an amorphous silicon flat-panel detector.

A GE Revolution 41RT flat-panel detector (GE 41RT) from GE Healthcare (GE) has been in operation at the Advanced Photon Source for over two years. The detector has an active area of 41 cm x 41 cm with 200 {micro}m x 200 {micro}m pixel size. The nominal working photon energy is around 80 keV. The physical set-up and utility software of the detector system are discussed in this article. The linearity of the detector response was measured at 80.7 keV. The memory effect of the detector element, called lag, was also measured at different exposure times and gain settings. The modulation transfer function was measured in terms of the line-spread function using a 25 {micro}m x 1 cm tungsten slit. The background (dark) signal, the signal that the detector will carry without exposure to X-rays, was measured at three different gain settings and with exposure times of 1 ms to 15 s. The radial geometric flatness of the sensor panel was measured using the diffraction pattern from a CeO{sub 2} powder standard. The large active area and fast data-capturing rate, i.e. 8 frames s{sup -1} in radiography mode, 30 frames s{sup -1} in fluoroscopy mode, make the GE 41RT one of a kind and very versatile in synchrotron diffraction. The loading behavior of a Cu/Nb multilayer material is used to demonstrate the use of the detector in a strain-stress experiment. Data from the measurement of various samples, amorphous SiO{sub 2} in particular, are presented to show the detector effectiveness in pair distribution function measurements.

43 PARTICLE ACCELERATORS↗

Numerical simulation of systems of shear bands in ductile metal with inclusions

We develop a method for numerical simulations of high strain-rate loading of mesoscale samples of ductile metal with inclusions. Because of its small-scale inhomogeneity, the composite material is prone to localized shear deformation (adiabatic shear bands). This method employs the Generalized Method of Cells of Paley and Aboudi [Mech. Materials, vol. 14, pp. 127–139, 1992] to ensure that the micro mechanical behavior of the metal and inclusions is reflected properly in the behavior of the composite at the mesoscale. To find the effective plastic strain rate when shear bands are present, we extend and apply the analytic and numerical analysis of shear bands of Glimm, Plohr, and Sharp [Mech. Materials, vol. 24, pp. 31–41, 1996]. Our tests of the method focus on the stress/strain response in uniaxial-strain flow, both compressive and tensile, of depleted uranium metal containing silicon carbide inclusions. We use the Preston-Tonks-Wallace viscoplasticity model [J. Appl. Phys., vol. 93, pp. 211–220, 2003], which applies to the high strain-rate regime of an isotropic viscoplastic solid. In results, we verify the elevated temperature and thermal softening at shear bands in our simulations of pure DU and DU/SiC composites. We also note that in composites, due the asymmetry caused by the inclusions, shear band form at different times in different subcells. In particular, in the subcells near inclusions, shear band form much earlier than they do in pure DU.

36 MATERIALS SCIENCE↗