Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICON 24”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Controllable deformation of silicon nanowires with strain up to 24%

Fabricated silicon nanostructures demonstrate mechanical properties unlike their macroscopic counterparts. Here we use a force mediating polymer to controllably and reversibly deform silicon nanowires. This technique is demonstrated on multiple nanowire configurations, which undergo deformation without noticeable macroscopic damage after the polymer is removed. Calculations estimate a maximum of nearly 24% strain induced in 30 nm diameter pillars. The use of an electron activated polymer allows retention of the strained configuration without any external input. As a further illustration of this technique, we demonstrate nanoscale tweezing by capturing 300 nm alumina beads using circular arrays of these silicon nanowires.

36 MATERIALS SCIENCE↗

Advanced Synthesis of Na 4 Si 24

The recently discovered orthorhombic allotrope of silicon, Si 24 , is an exciting prospective material for the future of solar energy due to a quasi-direct bandgap near 1.3 eV, coupled with the abundance and environmental stability of silicon. Synthesized via precursor Na 4 Si 24 at high temperature and pressure (~850 °C, 9 GPa), typical synthesis results have yielded polycrystalline samples with crystallites on the order of 20 μm. Several approaches to increase the crystal size have yielded success, including in-situ thermal spikes and refined selection of the starting materials. Microstructural analysis suggests that coherency exists between diamond silicon (d-Si) and Na 4 Si 24 . This hypothesis has led to the successful attempts at single crystal synthesis by selecting large crystals of d-Si along with metallic Na as the precursors rather than powdered and mixed precursor material. The new synthesis approach has yielded single crystals of Na 4 Si 24 greater than 100 μm. These results represent a breakthrough in synthesis that enables further characterization and utility. The promise of Si 24 for the future of solar energy generation and efficient electronics is strengthened through these advances in synthesis.

catalysis (heterogeneous)↗

Oxygen-Atom Defects In 6H Silicon Carbide Implanted Using 24- MeV O{sup 3+} Ions Measured Using Three-Dimensional Positron Annihilation Spectroscopy System (3DPASS)

Three dimensional electron-positron (e{sup -}-e{sup +}) momentum distributions were measured for single crystal 6H silicon carbide (SiC); both virgin and having implanted oxygen-atom defects. 6H SiC samples were irradiated by 24- MeV O{sup 3+} ions at 20 particle-nanoamps at the Sandia National Laboratory's Ion Beam Facility. O{sup 3+} ions were implanted 10.8 {mu}m deep normal to the (0001) face of one side of the SiC samples. During positron annihilation measurements, the opposite face of the 254.0-{mu}m thick SiC samples was exposed to positrons from a {sup 22}Na source. This technique reduced the influence on the momentum measurements of vacancy-type defects resulting from knock-on damage by the O{sup 3+} ions. A three-dimensional positron annihilation spectroscopy system (3DPASS) was used to measure e{sup -}-e{sup +} momentum distributions for virgin and irradiated 6H SiC crystal both before and following annealing. 3DPASS simultaneously measures coincident Doppler-broadening (DBAR) and angular correlation of annihilation radiation (ACAR) spectra. DBAR ratio plots and 2D ACAR spectra are presented. Changes in the momentum anisotropies relative to crystal orientation observed in 2D ACAR spectra for annealed O-implanted SiC agree with the local structure of defect distortion predicted using Surface Integrated Molecular Orbital/Molecular Mechanics (SIMOMM). Oxygen atoms insert between Si and C atoms increasing their separation by 0.9 A forming a Si-O-C bond angle of {approx}150 deg.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nuclear Data Sheets for A = 24

This evaluation of A = 24 has been updated from previous evaluations published in 1998En04, 1990En08, and 1978En02. Coverage includes properties of adopted levels and {gamma} rays, decay-scheme data (energies, intensities and placement of radiations), and cross reference entries. The following tables continue the tradition of showing the systematic relationships between levels in A = 24. These assignments are based on energy differences for states with the same J{sup {pi}} values, {gamma}-ray strengths, spectroscopic factors in analog single particle (T = 1) or two particle (T = 2) transfer reactions. Isospin is not a perfect quantum number and the adopted T-value may correspond to a small component in the wavefunction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mirror asymmetry for B(GT) of {sup 24}Si induced by Thomas-Ehrman shift

We carried out the beta-decay spectroscopy on {sup 24}Si in order to investigate a change in configuration in the wave function induced by Thomas-Ehrman shift from a perspective of mirror asymmetry of B(GT). We observed two beta transitions to low-lying bound states in {sup 24}Al for the first time. In this proceeding, the B(GT) of {sup 24}Si is compared with that of the mirror nucleus {sup 24}Ne, and the mirror asymmetry of B(GT) is determined. Then the origin of the B(GT) asymmetry is discussed through the comparison with theoretical calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Gamow-Teller transition of the proton-rich nucleus {sup 24}Si

The Gamow-Teller transition strength B(GT) of {sup 24}Si was measured to investigate characteristic structure of proton-rich nuclei induced by a weakly-bound proton. By combining the results of the delayed gamma-ray and proton measurements, the entire decay scheme of {sup 24}Si was reconstructed, then the B(GT) of {sup 24}Si was deduced. Focusing to the low-lying states, the B(GT) of {sup 24}Si to the 1{sub 1}{sup +} and 1{sub 2}{sup +} states in {sup 24}Al were smaller than that of the mirror nucleus {sup 24}Ne by 22% and 10%, respectively. The mirror asymmetry of B(GT) indicates the configuration change in the wave function. Through the comparison with theoretical shell-model calculations, it is implied that the configuration change is attributed to the lowering of the 1s{sub 1/2} orbital. The applicability of the theoretical calculations was checked using overall B(GT) distribution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Toward precise Q{sub EC} values for the superallowed 0{sup +}->0{sup +} beta decays of T=2 nuclides: The masses of {sup 20}Na, {sup 24}Al, {sup 28}P, and {sup 32}Cl

High-precision measurements of superallowed 0{sup +}->0{sup +} beta decays of T=2 nuclides such as {sup 20}Mg, {sup 24}Si, {sup 28}S, and {sup 32}Ar can contribute to searches for physics beyond the standard model of particle physics if the Q{sub EC} values are accurate to a few keV or better. As a step toward providing precise Q{sub EC} values for these decays, the ground-state masses of the respective daughter nuclei {sup 20}Na, {sup 24}Al, {sup 28}P, and {sup 32}Cl have been determined by measuring the ({sup 3}He,t) reactions leading to them with the {sup 36}Ar({sup 3}He,t){sup 36}K reaction as a calibration. A quadrupole-dipole-dipole-dipole (Q3D) magnetic spectrograph was used together with thin ion-implanted carbon-foil targets of {sup 20}Ne, {sup 24}Mg, {sup 28}Si, {sup 32}S, and {sup 36}Ar. The masses of {sup 20}Na and {sup 32}Cl are found to be in good agreement with the values from the 2003 Atomic Mass Evaluation (AME03) [G. Audi, A. H. Wapstra, and C. Thibault, Nucl. Phys. A 729, 337 (2003)], and the precision has been improved by a factor of 6 in both cases. The masses of {sup 24}Al and {sup 28}P are found to be higher than the values from AME03 by 9.5 keV (3.2sigma) and 11.5 keV (3.6sigma), respectively, and the precision has been improved by a factor of 2.5 in both cases. The new {sup 32}Cl mass is used together with the excitation energy of its lowest T=2 level and the mass of {sup 32}Ar to derive an improved superallowed Q{sub EC} value of 6087.3(22) keV for this case. The effects on quantities related to standard-model tests including the beta-nu correlation coefficient a and the isospin-symmetry-breaking correction delta{sub C} are examined for the A=32 case.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Astrophysically Important Reaction Rates For Novae And X-ray Bursts From Proton Breakup At Intermediate Energies

We discuss the use of one-nucleon removal reactions of loosely bound nuclei at intermediate energies as an indirect method in nuclear astrophysics. The breakup reactions are proved to be good spectroscopic tools and can be used to study a large number of loosely bound proton- or neutron-rich nuclei over a wide range of beam energies. As peripheral processes, they can be used to extract asymptotic normalization coefficients (ANCs) from which non-resonant capture reaction rates of astrophysical interest can be calculated parameter free. In this talk, we present results of a proton-breakup experiment carried out at GANIL (France) with a cocktail beam centered around {sup 23}Al at 50 MeV/nucleon. Momentum distributions of the breakup fragments, inclusive and in coincidence with gamma rays detected by EXOGAM Germanium clover array, were measured in the focal plan of SPEG energy-loss spectrometer. We present in particular the investigations of reaction rates for {sup 22}Mg(p,{gamma}){sup 23}Al and {sup 23}Al(p,{gamma}){sup 24}Si important for novae and X-ray bursts, respectively.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

{beta} decay of the proton-rich nucleus {sup 24}Si and its mirror asymmetry

{beta}-decay spectroscopy of the proton-rich nucleus {sup 24}Si was performed. The decay scheme was reconstructed from results of delayed {gamma}-ray and proton measurements. We observed two {beta} branches to bound states in {sup 24}Al for the first time. The branching ratios were determined to be 31(4)% and 23.9(15)% for the 1{sub 1}{sup +} state at 0.426 MeV and the state at 1.090 MeV, respectively. The observation of an allowed transition to the 1.090-MeV state enabled us to firmly determine its spin-parity as 1{sup +}. In the proton measurements performed with the {delta}E-E method, we observed a new unbound level at 6.735 MeV. The branching ratios to three unbound states, including the new level, were also determined for the first time. Based on the decay scheme, the B(GT) values of {sup 24}Si were deduced. The B(GT) values were smaller than those of the mirror nucleus {sup 24}Ne by 22% and 10% for the 1{sub 1}{sup +} and 1{sub 2}{sup +} states, respectively. The mirror asymmetries of B(GT), observed in both the 1{sub 1}{sup +} and the 1{sub 2}{sup +} states, indicate changes in configuration in the wave function associated with the Thomas-Ehrman shift. To clarify the mechanism of this asymmetry, a comparison with shell-model calculations is also discussed. The calculations attribute the changes in configuration to the lowering of the 1s{sub 1/2} orbital.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation into behavior of weakly-bound proton via B(GT) measurement for the {beta} decay of {sup 24}Si

The {beta}-decay spectroscopy on {sup 24}Si was carried out in order to investigate the behavior of a weakly-bound s-wave proton. We observed two {beta} transitions to low-lying bound states in {sup 24}Al for the first time. The Gamow-Teller transition strengths B(GT) to the 1{sub 1}{sup +} and 1{sub 2}{sup +} states were deduced to be 0.13(2) and 0.14(1), which were smaller than that of mirror nucleus {sup 24}Ne by 22% and 10%, respectively. These mirror asymmetries of B(GT) indicate the configuration change in the wave function. By comparing with theoretical shell-model calculations, it is implied that the configuration change is attributed to the lowering of the 1s{sub 1/2} orbital.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Reduction of spectroscopic strength: Weakly-bound and strongly-bound single-particle states studied using one-nucleon knockout reactions

Both one-proton and one-neutron knockout reactions were performed with fast beams of two asymmetric, neutron-deficient rare isotopes produced by projectile fragmentation. The reactions are used to probe the nucleon spectroscopic strengths at both the weakly and strongly bound nucleon Fermi surfaces. The one-proton knockout reactions {sup 9}Be({sup 28}S,{sup 27}P)X and {sup 9}Be({sup 24}Si,{sup 23}Al)X probe the weakly bound valence proton states and the one-neutron knockout reactions and {sup 9}Be({sup 28}S, {sup 27}S)X and {sup 9}Be({sup 24}Si, {sup 23}Si)X the strongly bound neutron states in the two systems. The spectroscopic strengths are extracted from the measured cross sections by comparisons with an eikonal reaction theory. The reduction of the experimentally deduced spectroscopic strengths, relative to the predictions of shell-model calculations, is of order 0.8-0.9 in the removal of weakly bound protons and 0.3-0.4 in the knockout of the strongly bound neutrons. These results support previous studies at the extremes of nuclear binding and provide further evidence that in asymmetric nuclear systems the nucleons of the deficient species, at the more-bound Fermi surface are more strongly correlated than those of the more weakly bound excess species.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Form of silicon and method of making the same

The invention relates to a new phase of silicon, Si.sub.24, and a method of making the same. Si.sub.24 has a quasi-direct band gap, with a direct gap value of 1.34 eV and an indirect gap value of 1.3 eV. The invention also relates to a compound of the formula Na.sub.4Si.sub.24 and a method of making the same. N.sub.a4Si.sub.24 may be used as a precursor to make Si.sub.24.

Strobel, Timothy A.↗

Form of silicon and method of making the same

The invention relates to a new phase of silicon, Si.sub.24, and a method of making the same. Si.sub.24 has a quasi-direct band gap, with a direct gap value of 1.34 eV and an indirect gap value of 1.3 eV. The invention also relates to a compound of the formula Na.sub.4Si.sub.24 and a method of making the same. Na.sub.4Si.sub.24 may be used as a precursor to make Si.sub.24.

36 MATERIALS SCIENCE↗

Silicon Effects on Properties of Melt Infiltrated SiC/SiC Composites

Silicon effects on tensile and creep properties, and thermal conductivity of Hi-Nicalon SiC/SiC composites have been investigated. The composites consist of 8 layers of 5HS 2-D woven preforms of BN/SiC coated Hi-Nicalon fiber mats and a silicon matrix, or a mixture of silicon matrix and SiC particles. The Hi-Nicalon SiC/silicon and Hi-Nicalon SiC/SiC composites contained about 24 and 13 vol% silicon, respectively. Results indicate residual silicon up to 24 vol% has no significant effect on creep and thermal conductivity, but does decrease the primary elastic modulus and stress corresponding to deviation from linear stress-strain behavior.

Bhatt, Ramakrishna T.↗

Scalable Manufacturing of Efficient Perovskite/Silicon Tandem Modules

Crystalline-Si (c-Si) technology produces excellent solar cells with conversion efficiencies of up to 26.7%—nearly their practical limit of 27%—and has been commercialized extensively to produce panels below $\$0.40$/W. Techno-economic analysis shows that module efficiency will continue to be a primary cost driver because of high balance-ofsystems costs, and there is no path to higher efficiencies with single-junction silicon cells. In this project, three research teams from University of North Carolina, Arizona State University and National Renewable National Laboratory worked together to develop perovskite-silicon tandem cells with a high throughput process which can handle 5000 wafers per hour, enabled by very low added CAPEX of ~$20k for a doctor-blade coater. This can potentially increase the module efficiency to 30% (with grid) with small increase of cost, which will drive down the cost of silicon modules to be at least 16% cheaper than present silicon PERC modules. We also explored the alternative narrow bandgap perovskites as silicon replacement for all perovskite tandem cells. This project has substantially advanced the progress of solution-process perovskitessilicon tandem solar cells and perovskite-perovskite tandem solar cells with many inventions and discoveries, evidenced by 18 publications and 6 invention disclosures. Several notable examples include 1) we developed the new idea of small pyramid in combination with solution grown perovskites and demonstrated record-efficiency of 28.5% for 1 cm2 on textured silicon bottom cells and 25.2% for 24 cm2 on chemically etched silicon bottom cells for perovskite-silicon tandem cells. 2) We developed perovskite ink that can coat perovskites onto texture silicon without voids;, and new device structure to enhance the yield of fabrication by reducing shunting 3) We identified the origin of open circuit voltage on mixed halide wide bandgap perovskites, and came with a solution for this problem, reducing the voltage loss to a record small value, which can potentially push the perovskite-silicon tandem cell efficiency to over 31%; 4) We have developed efficient alternative low bandgap semiconductors, i.e. gradient-doped Sn based perovskites by Ba ions, new oxide hole transport layers which increase the efficiency of perovskite/perovskite tandem cells reached record efficiency of 26.3%; 5) We developed bifacial perovskite/perovskite tandem cells by overcoming contacts issues and regaining light absorption, further boosting the equivalent efficiency to 29.3% under 1 sun illumination with 30% albedo light; 6) We developed the first all perovskite tandem module fabricated in air by discovery a combination of oxidization and reduction couples, yield an aperture efficiency of 21.6% for all perovskite mininodules, exceeding that of single junction perovskite minimodules. These discoveries not only accelerate the commercialization of perovskite-silicon tandem solar cells, but also provide guidance in designing other type of perovskite solar cell technologies.

14 SOLAR ENERGY↗

Thermal and chemical evolution in the early Solar System as recorded by FUN CAIs: Part II - Laboratory evaporation of potential CMS-1 precursor material

We present the results of laboratory experiments in which a forsterite-rich melt estimated to be a potential precursor of Allende CMS-1 FUN CAI was evaporated into vacuum for different lengths of time at 1900 °C. The evaporation of this melt resulted in residues that define trajectories in chemical as well as magnesium, silicon and oxygen isotopic composition space and come very close to the measured properties of CMS-1. The isotopic composition of the evaporation residues was also used to determine the kinetic isotopic fractionation factors [α 2,1 (vapor-melt) defined as the ratio of isotopes 2 and 1 of a given element in the evaporating gas divided by their ratio in the evaporating source] for evaporation of magnesium (α 25,24 for 25Mg/24Mg), silicon (α 29,28 for 29 Si/ 28 Si) and oxygen (α 18,16 for 18 O/ 16 O) from the forsterite-rich melt at 1900 °C. The values of α 25,24 = 0.98383 ± 0.00033 and α 29,28 = 0.99010 ± 0.00038 are essentially independent of change in the melt composition as evaporation proceeds. In contrast, α18,16 changes from 0.9815 ± 0.0016 to ~0.9911 when the residual melt composition changes from forsteritic to melilitic. Using the determined values of α 25,24 and α 29,28 and present-day bulk chemical composition of the CMS-1, the composition of the precursor of the inclusion was estimated to be close to the clinopyroxene + spinel + forsterite assemblage condensed from a solar composition gas. The correspondence between the chemical composition and isotopic fractionation of experimental evaporation residues and the present-day bulk chemical and isotopic compositions of CMS-1 is evidence that evaporation played a major role in the chemical evolution of CMS-1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Properties of Single-Crystalline Na 4 Si 24

We present that Na 4 Si 24 is the precursor to Si 24 , a recently discovered allotrope of silicon. With a quasidirect band gap near 1.3 eV, Si 24 has potential to transform silicon-based optoelectronics including solar energy conversion. However, the lack of large, pure crystals has prevented the characterization of intrinsic properties and has delayed deposition-based metastable growth efforts. Here, we report an optimized synthesis methodology for single-crystalline Na 4 Si 24 with crystals approaching the millimeter-size scale with conditions near 9 GPa and 1123 K. Single-crystal diffraction was used to confirm the open-framework structure, and Na atoms remain highly mobile within the framework channels, as determined by electrical conductivity and electron energy loss spectroscopy measurements. In conclusion, an epitaxial relationship between Na 4 Si 24 and diamond cubic silicon (DC-Si), observed through high-resolution transmission electron microscopy, is proposed to facilitate the growth of high-quality Na 4 Si 24 crystals from DC-Si wafers mixed with metallic Na and could provide a viable path forward for scaling efforts of Na 4 Si 24 and Si 24 .

36 MATERIALS SCIENCE↗

Terahertz Chiral Metamaterials Enabling Broadband Polarization Conversion Using Polarization Guiding Effect

Polarization control plays a vital role in terahertz (THz) photonics, enabling a wide range of applications from imaging and spectroscopy to sensing and wireless communication. However, conventional polarization control methods at THz frequencies are limited by narrow operational bandwidths and excessive absorption losses. In this work, we present a broadband THz polarization control based on the polarization guiding effect. We design and fabricate a THz polarization rotator capable of rotating incident linear polarization by 90°. The device consists of 24 twistingly stacked silicon–air metagrating layers that introduce a large degree of form birefringence, with each metagrating layer being 280 µm thick and sequentially twisted by 3.75°. Numerical simulations using the Berreman 4 × 4 method predict broadband operation of the device. Experimental validation using THz time-domain spectroscopy confirms efficient and broadband 90° polarization rotation from 0.2 to 1.25 THz. Based on this concept, we further propose THz Q-plates for the generation of broadband structured vector beams with radial and azimuthal polarization states. This work offers a scalable, material-agnostic platform for advanced THz polarization manipulation and vector beam engineering, opening new pathways for next-generation THz photonic devices.

36 MATERIALS SCIENCE↗