Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SCATTERING COEFFICIENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

The SASS scattering coefficient algorithm

This paper describes the algorithms used to convert engineering unit data obtained from the Seasat-A satellite scatterometer (SASS) to radar scattering coefficients and associated supporting parameters. A description is given of the instrument receiver and related processing used by the scatterometer to measure signal power backscattered from the earth's surface. The applicable radar equation used for determining scattering coefficient is derived. Sample results of SASS data processed through current algorithm development facility (ADF) scattering coefficient algorithms are presented which include scattering coefficient values for both water and land surfaces. Scattering coefficient signatures for these two surface types are seen to have distinctly different characteristics. Scattering coefficient measurements of the Amazon rain forest indicate the usefulness of this type of data as a stable calibration reference target.

Bracalente, E. M.↗
NASA NTRS1989

Radiative transfer theory for inhomogeneous media with random extinction and scattering coefficients

The small-angle scattering approximation of the scalar radiative transfer equation (RTE) is examined for the case where the extinction and scattering coefficients have a component that is a deterministic function of position along the propagation path and a component that is a random function of position transverse to the propagation direction. It is found that the resulting stochastic RTE can be reduced to a system of two stochastic integrodifferential equations for the average and fluctuating components of the radiant intensity. Two transfer equations are obtained describing the average radiant intensity and the spatial correlation function of the intensity fluctuations. The average intensity equation is then solved and applied to a simple propagation scenario. An approximate solution is also derived for the equation giving the correlation function. The developed equations can be applied to problems involving short wavelength electromagnetic wave propagation through media possessing the variable characteristics of turbulence and turbidity, such as plasmas, the atmosphere, and the ocean.

Manning, Robert M.↗
NASA NTRS2000

Influence of Humidity on the Aerosol Scattering Coefficient and Its Effect on the Upwelling Radiance During ACE-2

Aerosol scattering coefficients (sigma(sub sp)) have been measured over the ocean at different relative humidities (RH) as a function of attitude in the region surrounding the Canary Islands during the Second Aerosol Characterization Experiment (ACE-2) in June and July 1997. The data were collected by the University of Washington passive humidigraph (UWPH) mounted on the Pelican research aircraft. Concurrently, particle size distributions absorption coefficients and aerosol optical depth were measured throughout 17 flights. A parameterization of sigma(sub sp) as a function of RH was utilized to assess the impact of aerosol hydration on the upwelling radiance (normalized to the solar constant and cosine of zenith angle). The top of the atmosphere radiance signal was simulated at wavelengths corresponding to visible and near-infrared bands or the EOS-AM ("Terra") detectors, MODIS and MISR. The UWPH measured (sigma(sub sp)) at 2 RHs, one below and the other above ambient conditions. Ambient (sigma(sub sp)) was obtained by interpolation of these 2 measurements. The data were stratified in terms of 3 types of aerosols: Saharan dust, clean marine (marine boundary layer background) and polluted marine aerosols (i.e., 2- or 1-day old polluted aerosols advected from Europe). An empirical relation for the dependence of (sigma(sub sp)) on RH, defined by (sigma(sub sp))(RH) = k. ((1 - RH/100)(exp -gamma), was used with the hygroscopic exponent gamma derived from the data. The following gamma values were obtained for the 3 aerosol types: gamma(dust) = 0.23 +/- 0.05, gamma(clean marine) = 0.69 +/- 0.06 and gamma(polluted marine) = 0.57 + 0.06. Based on the measured (gamma)(s), the above equation was utilized to derive aerosol models with different hygroscopicities. The satellite simulation signal code 6S was used to compute the upwelling radiance corresponding to each of those aerosol models at several ambient humidities. For the pre-launch estimated precision of the sensors and the assumed viewing geometry of the instrument, the simulations suggest that the spectral and angular dependence of the reflectance measured by MISR is not sufficient to distinguish aerosol models with various different combinations of values ror dry composition. y and ambient RH. A similar behavior is observed for MODIS at visible wavelengths. However, the 2100 nm band of MODIS appears to be able to differentiate between at least some aerosol models with different aerosol hygroscopicity given the MODIS calibration error requirements. This result suggests the possibility of retrieval of aerosol hygroscopicity by MODIS.

Gasso, B. S.↗
NASA NTRS2000

Influence of Humidity On the Aerosol Scattering Coefficient and Its Effect on the Upwelling Radiance During ACE-2

Aerosol scattering coefficients (sigma(sub sp)) have been measured over the ocean at different relative humidities (RH) as a function of altitude in the region surrounding the Canary Islands during the Second Aerosol Characterization Experiment (ACE-2) in June and July 1997. The data were collected by the University of Washington passive humidigraph (UWPH) mounted on the Pelican research aircraft. Concurrently, particle size distributions, absorption coefficients and aerosol optical depth were measured throughout 17 flights. A parameterization of sigma(sub sp) as a function of RH was utilized to assess the impact of aerosol hydration on the upwelling radiance (normalized to the solar constant and cosine of zenith angle). The top of the atmosphere radiance signal was simulated at wavelengths corresponding to visible and near-infrared bands of the EOS (Earth Observing System) AM-1 (Terra) detectors, MODIS (Moderate Resolution Imaging Spectroradiometer) and MISR (Multi-angle Imaging Spectroradiometer). The UWPH measured sigma(sub sp) at two RHs, one below and the other above ambient conditions. Ambient sigma(sub sp) was obtained by interpolation of these two measurements. The data were stratified in terms of three types of aerosols: Saharan dust, clean marine (marine boundary layer background) and polluted marine aerosols (i.e., two- or one-day old polluted aerosols advected from Europe). An empirical relation for the dependence of sigma(sub sp) on RH, defined by sigma(sub sp)(RH) = k.(1 - RH/100)(sup gamma), was used with the hygroscopic exponent gamma derived from the data. The following gamma values were obtained for the 3 aerosol types: gamma(dust) = 0.23 +/- 0.05, gamma(clean marine) = 0.69 +/- 0.06 and gamma(polluted marine) = 0.57 +/- 0.06. Based on the measured gammas, the above equation was utilized to derive aerosol models with different hygroscopicities. The satellite simulation signal code 6S was used to compute the upwelling radiance corresponding to each of those aerosol models at several ambient humidities. For the prelaunch estimated precision of the sensors and the assumed viewing geometry of the instrument, the simulations suggest that the spectral and angular dependence of the reflectance measured by MISR is not sufficient to distinguish aerosol models with various different combinations of values for dry composition, gamma and ambient RH. A similar behavior is observed for MODIS at visible wavelengths. However, the 2100 nm band of MODIS appears to be able to differentiate between at least same aerosol models with different aerosol hygroscopicity given the MODIS calibration error requirements. This result suggests the possibility of retrieval of aerosol hygroscopicity by MODIS.

Gasso, S.↗
NASA NTRS1991

A numerical procedure for recovering scattering coefficients from measurements with wide-beam antennas

A numerical procedure for estimating true scattering coefficients, sigma0, from measurements made using wide-beam antennas is discussed. The use of wide-beam antennas results in an inaccurate estimate of sigma0. To reduce this error, the authors propose a correction procedure that estimates the error resulting from the use of narrow-beam approximation and utilizes the error to obtain a more accurate estimate of sigma0. An exponential model is assumed to take into account the variation of sigma0 with incidence angles, and the model parameters are estimated from measured data. Based on the model and knowledge of the antenna pattern, the procedure calculates the error due to the narrow-beam approximation. The procedure is shown to provide a significant improvement in the estimation of sigma0 obtained in wide-beam antennas. The proposed procedure is also shown to be insensitive to the assumed sigma0 model.

Wang, Qinglin↗
NASA NTRS1991

A numerical procedure for recovering true scattering coefficients from measurements with wide-beam antennas

A numerical procedure for estimating the true scattering coefficient, sigma(sup 0), from measurements made using wide-beam antennas. The use of wide-beam antennas results in an inaccurate estimate of sigma(sup 0) if the narrow-beam approximation is used in the retrieval process for sigma(sup 0). To reduce this error, a correction procedure was proposed that estimates the error resulting from the narrow-beam approximation and uses the error to obtain a more accurate estimate of sigma(sup 0). An exponential model was assumed to take into account the variation of sigma(sup 0) with incidence angles, and the model parameters are estimated from measured data. Based on the model and knowledge of the antenna pattern, the procedure calculates the error due to the narrow-beam approximation. The procedure is shown to provide a significant improvement in estimation of sigma(sup 0) obtained with wide-beam antennas. The proposed procedure is also shown insensitive to the assumed sigma(sup 0) model.

Wang, Qinglin↗
NASA NTRS1974

Design data for radars based on 13.9 GHz Skylab scattering coefficient measurements

The author has identified the following significant results. Measurements made at 13.9 GHz with the radar scatterometer on Skylab have been combined to produce median curves of the variation of scattering coefficient with angle of incidence out to 45 deg. Because of the large number of observations, and the large area averaged for each measured data point, these curves may be used as a new design base for radars. A reasonably good fit at larger angles is obtained using the theoretical expression based on an exponential height correlation function and also using Lambert's law. For angles under 10 deg, a different fit based on the exponential correlation function, and a fit based on geometric optics expressions are both reasonably valid.

Moore, R. K.↗
NASA NTRS2004

Orbit Optimization and Scattering Coefficient Analysis for the Proposed GLORIA System

This paper investigates the optimization of an orbit for a Low-Earth Orbiting (LEO) satellite for coastal coverage over Antarctic and United States shorelines as part of the Geostationary/Low-Earth Orbiting Radar Image Acquisition (GLORIA) System. Simulations over a range of orbital parameters are performed to determine the optimal orbit. Scattering coefficients are computed for the optimal orbit throughout the day and characterized to compare various scenarios for which link budget comparisons could then be made.

Welch, Bryan↗
NASA NTRS1988

Comparison of measured C-band scattering coefficients with model predictions as a function of leaf area index and Biomass

The backscattering coefficients for black spruce and aspen at an incidence angle of 50 deg obtained using a helicopter mounted C-band scatterometer are related to leaf area index (LAI) and biomass for several dates while leaves are present. These data are compared with estimates obtained from the Fung disk model for aspen. Implications for spacecraft SAR (e.g., SIR-C) systems and their ability to determine biophysical characteristics of forest canopies are discussed. The precision of SAR data is insufficient to provide consistent tests of the relationship of LAI to the scattering coefficient for single polarizations alone. Backscatter models only provide a simulation of part of the canopy, and more attention needs to be placed on collecting field data which support tests of the microwave scattering models.

Pitts, D. E.↗
NASA NTRS1992

Determining water cloud particle sizes from lidar depolarization measurements and time dependent multiple scattering coefficients

We present a technique of extracting water cloud particle size information from lidar measurements in conjunction with double scattering calculations. In this presentation, we describe the technique and give examples using data taken with the Air Force Phillips Laboratory's (Geophysics Directorate) low altitude Nd:YAG, elastic backscatter lidar. In a related presentation we describe the double scattering lidar model which we developed for this work. The technique uses simultaneous measurements of two orthogonal linear polarization components of lidar returns from water clouds or other media composed of spherical particles. Any depolarization of the incident lidar radiation backscattered by such a media can only be due to multiple scattering. The amount of depolarization is dependent on the extinction coefficient and the single scatter phase matrix, both of which are functions of position in the medium. The phase matrix is dependent on the index of refraction of the particles and the particle size distribution. Our technique is a modification of a procedure presented in Reference 1. There, particle sizes of water clouds are determined from double scattering calculations together with measurements of radiation scattered from volumes outside the lidar receiver's field of view (which can only be multiply scattered radiation). The methodology of our technique is similar but our 'probe' of the scattering phase function (and thus the particle size distribution) is different.

Garner, R. C.↗
NASA NTRS2005

Effect of Scattering on the Heat Transfer Behavior of a Typical Semitransparent TBC Material on a Substrate

A parametric study was performed to examine the effects of isotropic scattering on the heat transfer in typical semitransparent thermal barrier coating on an opaque substrate. Some ceramic materials are semitransparent in the wavelength range where thermal radiation is important. Therefore, absorption, emission, and scattering of thermal radiation by the semitransparent layer and the emissivity of the substrate will affect the heat transfer and temperature in the layer. Scattering which depends on the structure of the semitransparent material can be used to increase the reflectivity of the layer and therefore decrease the heat transfer through the layer. A one dimensional model of a 1 mm thick semitransparent layer on a substrate was used in this study. The front of the semitransparent layer is heated by convection and radiation and the back of the substrate is cooled by radiation and convection. The coating is assumed to be semitransparent up to a cutoff wavelength and opaque at higher wavelengths. The absorption and scattering coefficient are constant over the wavelength range where the material is semitransparent. The absorption coefficient, scattering coefficients, width of the semitransparent band, and the bond coat emissivity are varied. Temperature profiles and heat flux through layers as a function of absorption and scattering coefficients are presented.

Spuckler, Charles M.↗
DOE OSTI2025

Map-level baryonification: unified treatment of weak lensing two-point and higher-order statistics

Precision cosmology benefits from extracting maximal information from cosmic structures, motivating the use of higher-order statistics (HOS) at small spatial scales. However, predicting how baryonic processes modify matter statistics at these scales has been challenging. The baryonic correction model (BCM) addresses this by modifying dark-matter-only simulations to mimic baryonic effects, providing a flexible, simulation-based framework for predicting both two-point and HOS. We show that a 3-parameter version of the BCM can jointly fit weak lensing maps' two-point statistics, wavelet phase harmonics coefficients, scattering coefficients, and the third and fourth moments to within 2% accuracy across all scales ℓ < 2000 and tomographic bins for a DES-Y3-like redshift distribution ( z ≲ 2), using the FLAMINGO simulations. These results demonstrate the viability of BCM-assisted, simulation-based weak lensing inference of two-point and HOS, paving the way for robust cosmological constraints that fully exploit non-Gaussian information on small spatial scales.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Establishing robust correction schemes for improved and reliable ARM-AOS aerosol optical data products

Aerosol light absorption and scattering of solar radiation play an important role in the earth’s atmosphere in terms of direct and semi-direct radiative forcing. Optical parameters of importance to the US Department of Energy (DOE) climate models include absorption and scattering coefficients, single scattering albedo (SSA), absorption Angstrom exponents (AAE), and the asymmetry parameter (g). These parameters depend on aerosol size, shape and composition (refractive index), and are spectrally sensitive in the shortwave region. Additionally, these parameters have a complex dependency on the emission source, especially for carbonaceous aerosols. The DOE Atmospheric Radiation Measurement (ARM) user facility has deployed aerosol observing systems (AOS) containing several filter-based instruments to measure and constrain aerosol optical properties and related parameters at multiple sites worldwide. For measurement of aerosol light absorption, the AOS includes filter-based instruments (particle soot absorption photometer and tricolor absorption photometer) that infer particle-phase aerosol absorption coefficients at nominal red, green, and blue wavelength bands from the attenuation (ATN) of light passing through a particulate filter on which aerosols are deposited. Measurement of aerosol scattering is done in situ using nephelometers. By combining inferred absorption coefficients from filter-based ATN measurements and in situ scattering coefficients, value-added products (VAPs) such as SSA, AAE, and g are derived.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1999

Source Methodology for Turbofan Noise Prediction (SOURCE3D Technical Documentation)

This report provides the analytical documentation for the SOURCE3D Rotor Wake/Stator Interaction Code. It derives the equations for the rotor scattering coefficients and stator source vector and scattering coefficients that are needed for use in the TFANS (Theoretical Fan Noise Design/Prediction System). SOURCE3D treats the rotor and stator as isolated source elements. TFANS uses this information, along with scattering coefficients for inlet and exit elements, and provides complete noise solutions for turbofan engines. SOURCE3D is composed of a collection of FORTRAN programs that have been obtained by extending the approach of the earlier V072 Rotor Wake/Stator Interaction Code. Similar to V072, it treats the rotor and stator as a collection of blades and vanes having zero thickness and camber contained in an infinite, hardwall annular duct. SOURCE3D adds important features to the V072 capability-a rotor element, swirl flow and vorticity waves, actuator disks for flow turning, and combined rotor/actuator disk and stator/actuator disk elements. These items allow reflections from the rotor, frequency scattering, and mode trapping, thus providing more complete noise predictions than previously. The code has been thoroughly verified through comparison with D.B. Hanson's CUP2D two- dimensional code using a narrow annulus test case.

Meyer, Harold D.↗
NASA NTRS1981

Progress in radar snow research

Multifrequency measurements of the radar backscatter from snow-covered terrain were made at several sites in Brookings, South Dakota, during the month of March of 1979. The data are used to examine the response of the scattering coefficient to the following parameters: (1) snow surface roughness, (2) snow liquid water content, and (3) snow water equivalent. The results indicate that the scattering coefficient is insensitive to snow surface roughness if the snow is drv. For wet snow, however, surface roughness can have a strong influence on the magnitude of the scattering coefficient. These observations confirm the results predicted by a theoretical model that describes the snow as a volume of Rayleig scatterers, bounded by a Gaussian random surface. In addition, empirical models were developed to relate the scattering coefficient to snow liquid water content and the dependence of the scattering coefficient on water equivalent was evaluated for both wet and dry snow conditions.

Stiles, W. H.↗