Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Rheological properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Rheological Properties of Enzymatically Hydrolyzed Corn Stover Pretreated via Deacetylation and Mechanical Refining

Lignocellulosic biomass is a feedstock for fuels and chemicals that does not compete with food resources and has less contaminants than refuse-derived biomass feedstocks. To convert lignocellulosics to biofuels or value-added products, multiple processing steps are typically necessary. One method of producing biofuels from lignocellulosic biomass utilizes a deacetylation and mechanical refining pretreatment and an enzymatic hydrolysis reaction to produce fermentable sugars from cellulose and hemicellulose. The rheological properties of biomass, such as yield stress and plastic viscosity, change during enzymatic hydrolysis and alter the energy requirements for pumping and mixing, an important consideration for the design of processing equipment. The dynamic changes in rheological properties that occur in a corn stover feedstock undergoing enzymatic hydrolysis are characterized in this work, and the influence on pressure losses in piping systems is estimated. Two rheometer geometries were fabricated with stereolithography 3D printing to reduce wall slip and sample ejection. The slurries have complex rheological behaviors that include shear-thinning behavior. Shear stress ramps were performed on samples at 20 and 50 degrees C using the custom geometries, and the Herschel-Bulkley model was fit to the data. The dynamic nature of the rheological properties is correlated with changes in the average fiber length at various extents of reaction, and the influence of solids concentration on the observed rheology and piping pressure losses is discussed.

09 BIOMASS FUELS↗
DOE OSTI2025

Conclusions • Multimaterial and isotopically-labeled specimens were successfully fabricated via FFF-AM • Raman spectroscopy, atomic force microscopy, and neutron scattering show promise for direct measurements of interlayer diffusion in the multimaterial and isotopically-labeled specimens • Although isotopically-labeled specimens offer the greatest potential for experimentally verifying FFF-AM process models, substituting hydrogen with deuterium alters the thermal and rheological properties of the HDPE polymer

Multimaterial and Isotopically Labeled Specimen Fabrication via Material Extrusion Additive Manufacturing for Interlayer Diffusion Analysis

Jones, Haley W. [Savannah River National Laborator↗
DOE OSTI2025

Versatile Liquid Crystal Elastomer Formulations Using Amine-Acrylate Chemistry and Processing for Advanced Manufacturing

This study aims to tune rheological properties of liquid crystal elastomers (LCEs) through a strategic approach, leveraging the differing reaction rates of thiols and primary and secondary amines with acrylate monomers or the inclusion of processing additives to enable amenability to advanced manufacturing. We found that varying the time of oligomerization at elevated temperatures of amine-functional monomers with acrylate-functional monomers enabled simple control of rheological properties. Additionally, we could also control rheological properties by introducing reinforcing fillers or organic solvents. By varying the oligomerization conditions, we achieved a broad range of viscosities, from 1.1 Pa s to 560 Pa s as measured at 60 °C. When the rheological properties were varied through the incorporation of various solid and liquid inclusions, viscosities could range from less than 1 Pa s to nearly 1000 Pa s when measured at 60 °C. The shape morphing capabilities that are intrinsic to LCEs and the mechanical properties were also characterized. Here, we find that the oligomerization conditions and the addition of fillers influence shape morphing and energy absorption, as characterized by the stress–strain characteristics, further suggesting their potential to be used in energy dissipation applications where performance can be turned. Last, we demonstrate how the range of accessible rheological properties grants formulations amenable to various advanced manufacturing techniques.

Liquid chromatography↗
DOE OSTI2025

Rheology of lignin and lignin-based solutions, dispersions, gels, polymer blends, and melts

Lignin is an abundant resource that finds application in energy and sustainable materials development. In addition to the utilization of lignin in three-dimensional (3D) printing and hydrogel production, recent studies have reported the use of lignin as a liquid fuel additive. The characterization of the rheological properties of lignin and its derivatives is a dynamic and evolving field, underpinned by advances in experimental, analytical, and modeling techniques. Here, this review provides a comprehensive overview of the recent progress in the study of lignin rheology, highlighting the interplay between structure, modification, and flow behavior in lignin-based solutions, dispersions, gels, polymer blends, and melts. A specific highlight of this review is how lignin concentration affects the rheological properties of lignin-based solutions and dispersions. Furthermore, the effect of lignin type on the properties of 3D-printed lignin-based composites is discussed. For polymer systems, this review discussed lignin-in-polymer solutions separately from lignin-filled polymer systems. Finally, challenges and perspectives on lignin rheology are presented.

Dispersions↗
DOE OSTI2025

Coaxial Direct Ink Writing of Cholesteric Liquid Crystal Elastomers in 3D Architectures

Abstract Cholesteric liquid crystal elastomers (CLCEs) hold great promise for mechanochromic applications in anti‐counterfeiting, smart textiles, and soft robotics, thanks to the structural color and elasticity. While CLCEs are printed via direct ink writing (DIW) to fabricate free‐standing films, complex 3D structures are not fabricated due to the opposing rheological properties necessary for cholesteric alignment and multilayer stacking. Here, 3D CLCE structures are realized by utilizing coaxial DIW to print a CLC ink within a silicone ink. By tailoring the ink compositions, and thus, the rheological properties, the cholesteric phase rapidly forms without an annealing step, while the silicone shell provides encapsulation and support to the CLCE core, allowing for layer‐by‐layer printing of self‐supported 3D structures. As a demonstration, free‐standing bistable thin‐shell domes are printed. Color changes due to compressive and tensile stresses can be witnessed from the top and bottom of the inverted domes, respectively. When the domes are arranged in an array and inverted, they can snap back to their base state by uniaxial stretching, thereby functioning as mechanical sensors with memory. The additive manufacturing platform enables the rapid fabrication of 3D mechanochromic sensors thereby expanding the realm of potential applications for CLCEs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Direct Ink Write and Processing of Complex 3D Marine Compatible Structures with Calcium Carbonate Slurries

Ocean acidification heavily impacts marine ecosystems by reducing calcification. Many coral-algae symbiotic relationships are in jeopardy due to the destruction of coral reefs. Here, a ceramic ink compatible with the direct ink write additive manufacturing technique was formulated and used to print marine compatible structures that could grow algae and restore that relationship. A diacrylate polymer was mixed with calcium carbonate, a material that comprises a coral skeleton, to create a slurry with shear thinning properties. Rheology studies were conducted to confirm printing properties and characterize the slurry. Printed parts demonstrated strong control over print features, including size and infill design. Various infill patterns and percentages were attempted to optimize printability and potential algae growth. Thermogravimetric analysis helped determine a logical burnout and sintering procedure to avoid large cracking. This project developed a printable and sinter-able calcium carbonate ceramic slurry for complex marine-compatible structures and algae growth. This research was conducted in the support of the Eco Reef project.

36 MATERIALS SCIENCE↗
DOE OSTI2025

3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments

Global demand for adaptable and rapidly deployable construction solutions in offshore, coastal, and fluvial environments continues to rise, driven by pressing needs to develop energy platforms, improve coastal resilience, and support emergency response in the face of natural disasters. Increased investment in human-made coastal infrastructure, such as piers, support structures for power lines, offshore wind farms, and seawall protection systems, further underscores this trend. This study investigates the development of printable concrete mixtures for underwater environments using seawater as a replacement for freshwater, using a 3D printing syringe-based extrusion system. The effect of seawater addition and the printing medium (in air vs. underwater) was assessed via rheological and mechanical performance characterization. The results indicate rheological properties are favorable for seawater adoption by producing mixtures with higher yield stress and viscosity with the same levels of admixtures used for freshwater. Seawater-based mixtures demonstrated superior dimensional stability compared to freshwater counterparts, maintaining cross-sectional geometry, while compressive strength results showed no statistical differences between in-air and underwater samples. However, flexural strength was significantly influenced by geometry and printing medium. These findings establish critical rheological parameters for printable underwater mixtures and highlight the need for optimized curing strategies and layer bonding techniques to improve interfacial strength in underwater 3D printing applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Rheological and Structural Properties of k‐Carrageenan/Xanthan Gum Gummies Architected With a New Natural Additive

ABSTRACT Biohybrids (BHs)based on bentonite and anthocyanins can be produced as alternatives to synthetic colorants. However, no information is available on the interaction of biohybrid with food system. This research studies the rheological properties of gummies containing k‐carrageenan and xanthan gum incorporated with a BH. The incorporation of BH (≤ 2% w/w) increased the flow consistency index and shear thinning effect in melted gummies at 85°C. During cooling from 90°C to 25°C, the presence of BH altered the sol–gel transition temperature typical in carrageenan systems, probably by the formation of carrageenan complexes. At 25°C, all gummies had a solid‐like response with elastic modulus ( G ') higher than viscous modulus ( G "). G ' values increased linearly with BH concentration, and the linear viscoelastic region and breaking strain decreased with BH concentration, indicating that this natural additive acted as a reinforcing material.

Valencia, German Ayala [Department of Chemical and↗
DOE OSTI2024

3D Printing ofThermally Responsive Shape Memory LiquidCrystalline Epoxy Networks

Abstract A two-component liquid crystalline epoxy network (LCEN) with shape memory behavior was developed and evaluated as a candidate material for 3D printing. The cure kinetics of the uncured material and the shape memory properties of the cured LCEN were investigated by using parallel plate rheology and dynamic mechanical analysis, respectively. A commercially available fumed silica additive was introduced to the neat, uncured material to improve the rheological properties for 3D printing. The addition of fumed silica was found to increase the yield stress, shear-thinning behavior, and toughness of the uncured epoxy ink. Polarized light microscopy, differential scanning calorimetry, and wide-angle X-ray scattering measurements between the neat and additive-modified LCEN suggested a reduction in liquid crystalline alignment in the modified LCEN, owing to interactions between crystalline domains and fumed silica, which in turn influenced the mechanical behavior. Overall, the additive was found to be successful in preserving the shape memory properties of LCEN while improving its printability.

Chemistry↗
DOE OSTI2024

Unlocking Larger Scales and Aspect Ratios in 3D Printed Glass: Coupling Active Mixing and UV Curing for Advanced Printability and Crack Resistance

Recent developments in additive manufacturing (AM) of glass via silica-filled inks have facilitated fabrication of previously unattainable geometries and compositions. However, the maximum processable size of 15 mm limits the use of these prints in applications such as optics. A key limitation lies in the trade-off between material printability and green strength: increasing silica content in the feedstock improves crack resistance and reduces shrinkage but results in dramatic changes in viscoelastic properties that hinder flowability. Here, this paper presents a novel approach that offers expanded versatility in processable size, feedstock formulation, and printing. Described here is a direct ink writing (DIW) system coupled with an active high-shear micromixer and UV light source, capable of simultaneously printing multiple inks with a wide range of rheological properties. Choice of silica sourc, solvent, UV-curable binder, and dispersant is used to tune the ink rheology and improve printability and mechanical properties. Imparting high shear with the micromixer while UV-curing the extrudate allows for increased ink viscosities and reduced nozzle diameters, enabling printing finer feature sizes. With these advances, thin-walled high-aspect ratio structures and a crack-free glass disk measuring 44 mm in diameter are demonstrated, an increase of 3× in the greatest dimension compared to current state-of-the-art.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Self-Sensing Composites via an Embedded 3D-Printed PVDF-MoS 2 Nanosensor for Structural Health Monitoring

Carbon fiber (CF)-reinforced epoxy composites are widely used in vehicle applications, where early damage detection is crucial for reliability and safety. To address this need, we developed a self-sensing epoxy/CF composite by embedding a PVDF-MoS 2 nanosensor via an embedded 3D printing method. By harnessing the intrinsic curing kinetics of epoxy, we tailored its rheological properties to optimize the embedded printing process, enabling precise and reliable support for sensor filaments without compromising the composite’s structural and functional integrity. Through comprehensive rheological and kinetic analysis, we established a quantitative relationship among curing temperature, conversion rate, and resulting yield modulus─defining a narrow processing window essential for successful sensor integration. Specifically, we identified that an epoxy yield modulus range of 180–294 Pa and a conversion rate below 10% are critical to support the PVDF-MoS 2 filament architecture. Here, this embedded 3D printing method produces complex and multimaterial PVDF-MoS 2 sensors within an epoxy matrix with minimal deformation and reduced postprocessing, which is scalable and adaptable for industrial applications. Under cyclic loading, the embedded sensors exhibited stable signals under constant loads and increased voltage signals in response to crack formation (17–35% higher) and catastrophic failure (1 order of magnitude higher), effectively capturing structural changes in real time. This study demonstrates the potential of PVDF-MoS 2 nanocomposite sensor materials for real-time structural health monitoring in epoxy–CF composite systems, enabling early detection of defects and stress anomalies, significantly reducing the risk of unexpected failures, and enhancing structural reliability.

PVDF-MoS2 sensor↗
DOE OSTI2025

High‐Speed Embedded Ink Writing of Anatomic‐Size Organ Constructs

Embedded ink writing (EIW) is an emerging 3D printing technique that fabricates complex 3D structures from various biomaterial inks but is limited to a printing speed of ∼10 mm s −1 due to suboptimal rheological properties of particulate-dominated yield-stress fluids when used as liquid baths. In this work, a particle-hydrogel interactive system to design advanced baths with enhanced yield stress and extended thixotropic response time for realizing high-speed EIW is developed. In this system, the interactions between particle additive and three representative polymeric hydrogels enable the resulting nanocomposites to demonstrate different rheological behaviors. Accordingly, the interaction models for the nanocomposites are established, which are subsequently validated by macroscale rheological measurements and advanced microstructure characterization techniques. Filament formation mechanisms in the particle-hydrogel interactive baths are comprehensively investigated at high printing speeds. To demonstrate the effectiveness of the proposed high-speed EIW method, an anatomic-size human kidney construct is successfully printed at 110 mm s −1 , which only takes ∼4 h. This work breaks the printing speed barrier in current EIW and propels the maximum printing speed by at least 10 times, providing an efficient and promising solution for organ reconstruction in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Coarse-grained simulation of colloidal self-assembly, cation exchange, and rheology in Na/Ca smectite clay gels

Knowledge Gap: The aggregation of clay minerals—layered silicate nanoparticles—strongly impacts fluid flow, solute migration, and solid mechanics in soils, sediments, and sedimentary rocks. Experimental and computational characterization of clay aggregation is inhibited by the delicate water-mediated nature of clay colloidal interactions and by the range of spatial scales involved, from 1 nm thick platelets to flocs with dimensions up to micrometers or more. Simulations: Using a new coarse-grained molecular dynamics (CGMD) approach, we predicted the microstructure, dynamics, and rheology of hydrated smectite (more precisely, montmorillonite) clay gels containing up to 2,000 clay platelets on length scales up to 0.1 μm. Further, simulations investigated the impact of simulation time, platelet diameters (6 to 25nm), and the ratio of Na to Ca exchangeable cations on the assembly of tactoids (i.e., stacks of parallel clay platelets) and larger aggregates (i.e., assemblages of tactoids). We analyzed structural features including tactoid size and size distribution, basal spacing, counterion distribution in the electrical double layer, clay association modes, and the rheological properties of smectite gels. Findings: Our results demonstrate new potential to characterize and understand clay aggregation in dilute suspensions and gels on a scale of thousands of particles with explicit representation of counterion clouds and with accuracy approaching that of all-atom molecular dynamics (MD) simulations. For example, our simulations predict the strong impact of Na/Ca ratio on clay tactoid formation and the shear-thinning rheology of clay gels.

42 ENGINEERING↗
DOE OSTI2026

Scaled melter testing of alternative reductants for Low-Activity Waste vitrification: Melter feed properties and processing behavior

This study examines the use of boron nitride (BN) and coke dust as alternative reductants for low-activity waste vitrification in scaled melter systems, intended to enhance operational flexibility at the Hanford Waste Treatment and Immobilization Plant. The baseline reductant, sucrose, while widely considered advantageous for glass production rates, produces challenging off gas emissions during processing. Early crucible-scale testing indicated that BN and coke effectively control foaming and glass redox, while significantly reducing acetonitrile emissions. Both real tank waste and simulant waste melter feeds were tested with BN and coke in this study. Rheological properties for melter feeds with both reductants were within operational limits, although the particle size of coke should be controlled and sufficient agitation is necessary to ensure smooth operations. While promising for handling and reduction of emissions, both simulant melter feeds demonstrated lower average glass production rates in the simulant melter system compared with sucrose. In the radioactive system, the rates were more comparable to previously measured low activity waste feeds on the order of 1285 kg m 2 day −1 for BN and 1671 kg m −2 day −1 for coke. Further scale-up testing is required to interpret the processing rates in the context of the full scale melter systems and evaluate the cost-benefit impact of these reductants on efficiency and sustainability.

Rigby, Jessica C. [Pacific Northwest National Labo↗
DOE OSTI2025

Egg yolk as a model for gelation: From rheometry to flow physics

Egg yolks are an excellent model for studying sol-gel transitions, particularly the power law viscoelasticity that defines the critical point of gelation. However, prior studies lack comprehensive datasets and fail to visualize flow behavior linked to temperature and time-dependent linear and nonlinear rheology. Here, we present a detailed dataset characterizing egg yolk viscoelasticity across temperature, time, and forcing amplitude using oscillatory shear, step strain, step stress, and constant high strain rate. Novel protorheology visualizations link rheological properties with observable flow behavior. Our findings highlight the nuanced determination of the critical gel point, emphasizing observation timescale dependencies. We compare methods to identify critical temperatures for gelation, including power law viscoelasticity, moduli crossover, diverging zero-shear viscosity, and emerging equilibrium elastic modulus, while visualizing flow consequences near these transitions. Egg yolk is an accessible, realistic, and nontoxic material relevant to the physicist and the chef alike, making it ideal for understanding the rheology of critical gels. By integrating protorheology photos and videos with rigorous rheometric data, we deepen the understanding of critical gels, with broader impacts for studying other materials with sol-gel transitions.

Marsh, Maxwell C. [Department of Mechanical Scienc↗
DOE OSTI2025

Additive manufacturing of high‐density silicon carbide ceramics through post‐processing spark plasma sintering

This research advances the field of additive manufacturing (AM) of silicon carbide (SiC) ceramics by integrating spark plasma sintering (SPS) to enhance material density, mechanical strength, and thermal properties. Traditional AM techniques struggle to achieve the high‐density SiC required for demanding applications, such as aerospace engineering, where high thermal conductivity and mechanical strength are paramount. Here, our study addresses these challenges by incorporating SPS as a post‐processing step, achieving near‐theoretical maximum densities and significantly reducing porosity, thereby resulting in outstanding thermal conductivity in SiC ceramics. We developed a specialized SiC ink optimized for 3D printing, ensuring structural integrity after deposition through tailored rheological properties. The application of SPS facilitates rapid, uniform sintering, essential for attaining superior density, mechanical properties, and thermal performance. Our experimental results, confirmed through scanning electron microscopy analysis, demonstrate significant microstructural properties, mechanical strength, and thermal conductivity, showcasing the effectiveness of integrating SPS in AM processes. This innovative approach not only expands the capabilities of AM in producing complex, high‐density ceramic structures but also broadens the potential applications of SiC in demanding environments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis, Properties, and Metathesis Activity of Polyurethane Thermoplastics and Thermosets from a Renewable Polysesquiterpene Diol

Polyurethanes (PUs) are the sixth most commonly utilized plastic class, yet ∼80% of commodity material is landfilled or incinerated at the end of life. Disposal of thermosets is particularly problematic as cross-linking prevents the repurposing of disposed material. Thus, there is considerable interest in the development of PUs derived from inexpensive feedstocks that can be inherently chemically deconstructed. Ring opening metathesis polymerization (ROMP) of the naturally occurring sesquiterpene β-caryophyllene in the presence of dihydroxy chain terminators afforded the polyol hydroxy-terminated polycaryophyllene (HTPCR). Incorporation of HTPCR into PUs through reaction with polyisocyanates produced polymers with thermal and rheological properties comparable to commodity materials. The feasibility of chemical degradation of both thermoplastic and thermoset materials was also demonstrated through ruthenium-mediated metathesis, utilizing the metathesis-active olefins within the repeat caryophyllene monomer unit. Overall, this work highlights the value of biorenewable, chemically reprocessable polysesquiterpenes in the PU space.

materials↗