Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reductive elimination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Acid-catalyzed C–H reductive elimination from Au (III)

An unusual mode of C–H reductive elimination from a Au III complex catalyzed by acid is reported. The addition of triflic acid (HOTf) to [( tBu PCP)Au III –H]OTf (1-OTf, tBu PCP = 2,6-C 6 H 3 (CH 2 P t Bu 2 ) 2 promotes formal C–H reductive elimination. The Au I product [( tBu P(C–H)P)Au I ]OTf (2-OTf, tBu P(C–H)P = κ 2 (1,3-C 6 H 4 (CH 2 P t Bu 2 ) 2 )) was characterized by NMR spectroscopy and X-ray diffraction. It was shown that the reductive elimination of 1-OTf has a dependence on the identity of the acid catalyst which cannot be explained by acid strength. Mechanistic experiments are consistent with a concerted mechanism for C–H reductive elimination involving participation of basic moieties on the acid.

Ardon, Yotam [University of Pennsylvania, Philadel↗
DOE OSTI2025

Light-Promoted C(sp 3 )–C(sp 3 ) Reductive Elimination from Dialkyl NiII Complexes

Ni-catalyzed cross-coupling is a powerful strategy to forge C(sp 3 )–C(sp 3 ) bonds. Typically, to do so requires overcoming a challenging C–C bond-forming reductive elimination, often enabled by the intermediacy of highly oxidized Ni species or outer-sphere processes. While direct C(sp 3 )–C(sp 3 ) reductive elimination from the Ni II base oxidation state is normally thermally inaccessible, light-activation provides an avenue to affect such transformations. Here, we investigate the mechanism of light-induced C(sp 3 )–C(sp 3 ) bond formation from dialkyl bipyridine Ni II complexes through a variety of organometallic, spectroscopic, and computational studies. Wavelength-dependent quantum yields, ligand electronics–reactivity relationships, excited-state lifetimes, computed barriers, and product distributions from crossover studies support a photolysis/radical rebound mechanism. Furthermore, this reactivity paradigm complements existing strategies in the literature to promote reductive elimination from Ni II , such as the use of destabilizing, sterically hindered ligands and reduction of electron density at Ni through the binding of electron-deficient olefins. Hence, we envision that light-induced reductive elimination may enable the development of challenging C(sp 3 )–C(sp 3 ) couplings.

Alkyls↗
DOE OSTI2025

Olefin Coupling Catalyzed by (Pybox)Os Complexes via Osmacyclopentane Intermediates: Comparison with Isoelectronic (Phebox)Ir

(Pybox)Os is found to catalyze alkene hydrovinylation, effecting the dimerization of ethylene, tail-to-tail coupling of propene and 1-butene, and cross-coupling of ethylene with higher α-olefins. This reactivity contrasts with the previously reported dehydrogenative coupling of ethylene to give butadiene catalyzed by the isoelectronic fragment (Phebox)Ir. The reaction mechanism was investigated through computational and experimental means. Both the Os- and Ir-catalyzed reactions proceed through a [2 + 2 + 1] cyclization of the corresponding bis-olefin complex to yield an experimentally observed metallacyclopentane intermediate. In both cases, the metallacyclopentane undergoes β- H elimination, via a dechelated κ 2 -pincer-ligated intermediate, to yield a σ−π-but-3-enyl hydride complex or derivative. Both the greater reactivity and the distinct chemoselectivity of the Os system relative to the Ir system are attributable to C−H reductive elimination by the σ−π-but-3-enyl hydride having a barrier for Os much lower than that for Ir. This lower barrier to C−H elimination for Os is unexpected given that the thermodynamic driving force for elimination is much less for Os than for Ir. Computational studies of model complexes were conducted, comparing (Pybox)Os(L)(CH 3 )(H) with the isoelectronic (Phebox)Ir(L)(CH 3 )(H). The results indicate that the more facile kinetics with Os relative to Ir may be general for C−H elimination from six-coordinate d 6 complexes of the two metals, as well as for the microscopic reverse, i.e., C−H addition to the corresponding four-coordinate d 8 species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cyclometalated Platinum Compounds from Competing C–H/C–X Bond Activation Pathways

X−C^N^N (X = Br, Cl) ligands were reacted with [Pt 2 Me 4 (μ- SMe 2 ) 2 ], 1, resulting in a six-coordinate cyclometalated platinum(IV) compound containing an anionic C^N^N ligand when X = Br and both a platinum(IV) and a platinum(II) product when X = Cl. The platinum(II) species was formed by C−H activation, followed by reductive elimination of methane. The platinum compounds were characterized by multinuclear NMR spectroscopy and single-crystal X-ray diffraction (SCXRD). Photophysical properties were explored by using UV/vis, emission, and transient absorption (TA) spectroscopies. DFT and TDDFT calculations were performed to examine the competition between C−H activation and C−X oxidative addition and compared to experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Sulfite Is Not Required for N 2 Reduction Catalyzed by Mo-Nitrogenase

Mo-nitrogenase catalyzes the reduction of dinitrogen (N 2 ) to two ammonia (NH 3 ) at the active-site FeMo-cofactor. Substrate activation requires the accumulation of three or four electrons and protons as two Fe-bound hydrides and is coupled to obligatory H 2 release through reductive hydride elimination. Subsequent delivery of four or five additional electrons and protons to the bound N 2 yields two NH 3 molecules. Increasing evidence suggests that at least one belt sulfide within FeMo-cofactor is dynamically involved in the catalytic cycle. A recent report further proposed that sulfite (SO 3 2− ) is required for N 2 reduction, with sulfite binding required for NH 3 release and a subsequent six-electron reduction of the bound sulfite to regenerate the resting cofactor. To test this proposal, we conducted turnover studies of Mo-nitrogenase under sulfite-free conditions using a reduced viologen as reductant and protein preparations devoid of dithionite or sulfite. Under these conditions, nitrogenase effectively catalyzed both N 2 reduction and proton reduction, exhibiting steady-state turnover under N 2 for 6 min, with a turnover number exceeding 150, approaching that observed with dithionite as reductant. The same H 2 -formed/N 2 -reduced ratio was observed whether dithionite or the viologen species was used as reductant. Further, EPR spectroscopic analyses showed that the FeMo-cofactor returned to its resting state after multiple catalytic cycles in the absence of sulfite. Finally, physiological bypass of sulfite formation does not affect the capacity for diazotrophic growth of the model nitrogen-fixing organism Azotobacter vinelandii . Finally, these results demonstrate that sulfite is not required for Mo-nitrogenase-catalyzed N 2 reduction either in vitro or in vivo .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Rerouting reductant flux via protein tethering enhances biohydrogen production in Thermococcus kodakarensis

Microbes that generate copious amounts of hydrogen (H 2 ) via dark fermentation are a promising means to evolve and improve renewable biofuels. Many anaerobic hyperthermophilic archaea, such as the fast-growing, genetically tractable, heterotroph Thermococcus kodakarensis, produce generous quantities of H2 and provide an idealized platform to further optimize naturally high levels of biohydrogen reduction. Precise genetic manipulations and modifications to growth conditions have already resulted in substantial increases to H2 output but additional improvements are desired. An unexamined and potentially valuable route towards increased H 2 production is to tether select electron donor and acceptor proteins together to reroute and maximize the flow of electrons towards H 2 production. Such strategies have shown promise in Bacteria and Eukarya but have not yet been investigated in thermophilic Archaea. Here, we generate and evaluate twelve novel T. kodakarensis strains wherein a proteinaceous electron carrier (a ferredoxin, Fd) is physically tethered to the membrane-bound-hydrogenase (MBH), the sole H 2 producing enzyme, to direct electron flux towards biohydrogen generation. Growth assessments and H 2 output measurements demonstrate that strains encoding protein-fusions evolve up to ~ 40% more H2 per cell than the host strain. Eliminating H 2 consumption and alternative routes of electron sinks in concert with protein tethering further increased H2 output per cell for a maximum increase of ~ 66% over the host strain. Our results demonstrate that rerouting electron flux via protein tethering coupled with the elimination of reductant sinks is a promising means towards improved biohydrogen production in T. kodakarensis. KEY POINTS: Protein tethering between redox proteins can reroute electron flux in vivo. Enforced protein proximity results in ~ 40% increases in H2 production per cell. Protein-tethering provides a generalizable framework to redirect redox metabolism.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Probabilistic flux limiters

The stable numerical integration of shocks in compressible flow simulations relies on the reduction or elimination of Gibbs phenomena (unstable, spurious oscillations). A popular method to virtually eliminate Gibbs oscillations caused by numerical discretization in under-resolved simulations is to use a flux limiter. A wide range of flux limiters have been studied in the literature, with recent interest in their optimization via machine learning methods trained on high-resolution datasets. The common use of flux limiters in numerical codes as plug-and-play blackbox components makes them key targets for design improvement. Even for deterministic dynamical models, numerical uncertainty is introduced via coarse-graining required by insufficient computational power to solve all scales of motion. Conventional flux limiters are deterministic and lack the capacity to address uncertainties, both aleatoric (inherent randomness) and epistemic (modeling uncertainty due to limited knowledge), which arise in coarse-grained numerical simulations. Here, we introduce a conceptually distinct type of flux limiter that is designed to handle the effects of randomness in the model and uncertainty in model parameters. Unlike traditional single-function flux limiters, these new probabilistic flux limiters incorporate multiple flux limiting functions, each applied with a learned probability drawn from high-resolution data to mitigate the effects of uncertainty in numerical simulations. This approach departs from traditional single-function limiters by explicitly modeling and incorporating uncertainty into the shock capturing process. Using the example of Burgers' equation as a testbed, we show that a machine learned, probabilistic flux limiter may be used in a shock capturing code to more accurately capture shock profiles. In particular, we show that our probabilistic flux limiter outperforms standard limiters and can be successively improved upon (up to a point) by expanding the set of probabilistically chosen flux limiting functions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Boundary Corrections for Kernel Approximation to Differential Operators

The kernel-based approach to operator approximation for partial differential equations has been shown to be unconditionally stable for linear PDEs and numerically exhibit unconditional stability for non-linear PDEs. These methods have the same computational cost as an explicit finite difference scheme but can exhibit order reduction at boundaries. In previous work on periodic domains, order reduction was addressed, yielding high-order accuracy. The issue addressed in this work is the elimination of order reduction of the kernel-based approach for a more general set of boundary conditions. Further, we consider the case of both first and second order operators. To demonstrate the theory, we provide not only the mathematical proofs but also experimental results by applying various boundary conditions to different types of equations. The results agree with the theory, demonstrating a systematic path to high order for kernel-based methods on bounded domains.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Iron Oxide Reduction Rate Affects Iron Product Morphology

Magnetite concentrates from different parts of the Mesabi Range, exhibiting varying tendencies to encapsulate, were reduced using thermogravimetric analysis (TGA) and a high-temperature confocal scanning laser microscope (CSLM). Gas-phase mass-transfer conditions were intentionally varied by employing two reactors with different geometries: the TGA produced significantly slower reduction, whereas the CSLM setup yielded reduction rates up to 20 times faster under mass-transfer-controlled conditions. A preliminary mechanism is proposed to explain the transition from a porous iron product to a dense encapsulating layer. Encapsulation is interpreted as the outcome of competition between pore creation, driven by the reduction rate, and pore elimination, driven by surface diffusion. When pore formation is insufficient to counteract pore coarsening, a dense iron layer develops and restricts further reduction.

encapsulation↗
DOE OSTI2025

Review on Preprocessing Strategies, Deactivation, Thermal Safety, and Future Perspectives in Lithium-Ion Battery Recycling

The rapid growth in the use of lithium-ion batteries (LIBs) in electric vehicles, consumer electronics, and renewable energy storage has made effective end-of-life management essential. Recycling LIBs is critical not only for resource recovery and environmental protection but also for ensuring safety and economic viability. This review focuses on the preprocessing technologies that precede typical recovery processes, including disassembly, sorting, discharging, electrolyte removal, dismantling, thermal treatment, separation, and flotation. These steps play a foundational role in determining the efficiency, safety, and environmental impact of LIB recycling. LIBs pose substantial fire and explosion risks due to residual charge, flammable electrolytes, and reactive materials. The conditions and successive progression of the exothermic reactions which lead to thermal runaway has been discussed. It also explores secure deactivation techniques such as external circuit discharge, saline immersion, and thermomechanical methods, alongside fire prevention strategies including the use of flame retardants, elimination of oxidants, and reduction of heat generation and accumulation. Challenges and future directions are outlined, highlighting the need for standardized designs, automation, and safer, more sustainable recycling infrastructure. Furthermore, this review is distinguished by its focused analysis of preprocessing and deactivation steps, with particular attention to the thermal safety engineering aspects of LIB recycling.

Battery deactivation↗
DOE OSTI2025

High Power Density, Carbon Neutral Electrical Power Generation for Air Vehicles

The synergistic integration of a Solid Oxide Fuel Cell-Combustor (SOFC-C) with a turbogenerator (TG) will provide a very high fuel-to-electricity conversion efficiency while maintaining high power-to-weight ratio during high-altitude flight. The proposed SOFC-C-TG power generation technology exceeds the REEACH technical performance targets (TPT). This unique concept addresses many of the challenges faced in all electric propulsion-based aviation. The system has high part-load efficiency (more than 65% lower heating value (LHV)) during long cruise times, load following capability, high-power capacity at high altitudes adapting to low temperatures and pressures, rapid startup time of less than 30 minutes (proven with current SOFC technology), high power density (more than 3.2 kW/kg), efficient thermal management, and a foundation for a compact, efficient electrical storage and power generation system (ESPG). The SOFC-C concept achieves the technology targets by reducing the complexity of traditional fuel cell-gas turbine hybrid systems (FC-GT). The SOFC-C does not require heat exchangers and dramatically reduces the balance of plant increasing power density and performance in efficiency. The reduction in mass through elimination of heat exchangers, external reformer, and other components dramatically decreases the overall thermal dampening of the system which enables rapid startup and load following capability. Direct control of the cathode inlet temperature of the SOFC-C enables rapid warm-up of the SOFC tubes with the ability to reach operating temperature and full power in less than 30 minutes.

03 NATURAL GAS↗
DOE OSTI2026

Ultranano Titania: Selectively Ridding Water of Persistent Organic Pollutants

Persistent organic pollutants, including the EPA's “dirty dozen”, are difficult to remove from water supplies due to their chemical stability. Here, we report a stable oxide photocatalyst, ultranano titania (d < 2 nm) doped with iron, Fe•TiUNP, that efficiently mineralizes multiple persistent pollutants including aromatic compounds plus common troublesome, difficult-to-oxidize intermediates such as formaldehyde and acetone, netting mineralization of persistent pollutants. Efficiency stems from a direct charge-transfer pathway. The key role of iron doping is to lower the reduction potential of the photogenerated electron so that it is insufficient to reduce water, thus eliminating competition from the hydrogen evolution reaction. The reduction potential of the localized electron is similarly insufficient to reduce quinone, enabling breaking aromaticity. Specific results for degrading acetone, phenol, benzoic acid, and 1,4-benzoquinone are reported.

alcohols↗
DOE OSTI2026

Design and performance assessment of a dual-mode latent thermal storage integrated heat pump across multiple climate zones

The electrification of space cooling and heating systems risks overloading the existing electrical grid during peak hours. Heat pumps integrated with thermal energy storage (HP-TES) offer a promising solution by shifting peak loads to off-peak hours, reducing grid strains. This work presents the design and assessment of a dual-mode HP-TES that uses a single 22°C phase-change material (PCM) as a heat source or sink in heating and cooling modes, respectively. Performance assessment was conducted using Modelica-based transient models, and full-year simulations were conducted across eight US climate zones using typical weather data. Two HP-TES performance metrics: peak energy reduction and recharge energy increases, were defined by comparing HP-TES energy consumption with base HP peak consumptions. Annual heating demand reductions (40–65%) exceeded cooling demand reductions (15–20%) due to the elimination of peak-hour backup heating. Cooling mode recharge energy requirements (0–10%) were reduced in locations with lower summer nighttime temperatures, while heating recharge requirements were lower than the high base-peak energy demand from backup heating. Simplified rapid methods that were 10 7 times faster than annual simulations were developed to predict seasonal cooling and heating energy reductions, and recharge energy requirements, with maximum deviations of ±2.5% and ±3.5% points. These methods enabled rapid parametric studies that identified optimal location-specific PCM temperatures between 22°C and 27°C, highlighting the need to consider both discharge and recharge energy requirements to achieve sustainable, energy-efficient peak load shifting across various climate zones.

25 ENERGY STORAGE↗
DOE OSTI2025

Denoising Seismograms in the Time Domain Using a Deep Learning Model

Deep learning has emerged as a transformative tool for enhancing the extraction of reliable information from seismograms, addressing the increasing demand for precise and efficient seismic data analysis. We introduce an innovative encoder–decoder deep learning model, named WaveDenoiser, designed for noise reduction in the time domain, thereby eliminating the need for spectrogram computations that have been used for existing deep learning tools and significantly improving processing speed. Utilizing the benchmark dataset that is Stanford Earthquake Dataset, we developed three models of varying sizes: base, medium, and large. Notably, the large (referred to as WaveDenoiser) model demonstrated superior performance, achieving a median signal‐to‐noise ratio improvement of 8.8 dB on in‐distribution unseen data (in the same geographic region) and 7.7 dB on out‐distribution unseen data (in a new geographic region), outpacing both the base and medium models. Further evaluation of the WaveDenoiser model revealed a reduction in median arrival‐time errors by 0.02 s for P waves and 0.01 s for S waves when processing waveforms prior to phase picking using PhaseNet on in‐distribution unseen data. When tested on out‐distribution unseen data, the model also effectively reduced the P‐wave median arrival‐time error by 0.02 and 0.01 s in median arrival‐time error for S waves. Importantly, the application of WaveDenoiser resulted in a significant reduction of phase picking outliers by 1.1% to 3.6% for both P and S waves. In addition, we achieved over five times acceleration in processing speed compared with the seisBench implementation of DeepDenoiser. Our findings underscore the potential of WaveDenoiser as a powerful tool for improving seismic data analysis and processing efficiency.

P-waves↗
DOE OSTI2025

Rare earth metals production using alternative feedstock that eliminates HF

This work reports the successful production of rare earth (RE) metal using Na-RE-F. Presently, RE metals are primarily produced using RE-fluoride due to its higher air and moisture stability compared to RE-chloride. However, its preparation requires the use of corrosive and hazardous chemicals, such as hydrofluoric acid (HF) or ammonium bifluoride (NH 4 HF 2 ). The present study demonstrates that Na-RE-F is an alternative salt to the typically used RE-fluoride. The Na-RE-F for this work is produced via a scalable hydrometallurgical approach using three different RE salts as feedstock, including acetate, nitrate, and chloride. HF is neither used nor generated during the salt preparation process. Furthermore, the Na-RE-F powder dries in air (without dry HF), and only water evolves during the drying process. Analyses of the Na-RE-F show that NaF liberates as a flux during the heating process, which lowers the salt reduction temperature to <900 °C, thus minimizing or eliminating the need for additional flux. Calciothermic reduction of the Na-RE-F salt is successfully employed to obtain RE metal. This work represents a safer, greener, and more widely deployable approach for producing the RE metals needed for permanent magnets which support the transition to a cleaner society through the decarbonization of the transportation industry.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Integration of renewable energy generation and storage systems for emissions reduction in an islanded campus microgrid

Microgrid connected building communities are projected to play an integral part in the clean energy transition. These types of systems, when integrated with distributed energy resources (DERs) such as combined heat and power (CHP), district heating and cooling, renewable generation, and energy storage, can provide clean, reliable power to critical facilities and vulnerable communities. The intermittent nature of renewable generation is a challenge when integrating renewables into any grid system, but particularly in islanded microgrids. The University of Texas at Austin (UT) operates an islanded microgrid powered by a CHP plant, while also utilizing district heating and cooling systems and thermal energy storage (TES). High fidelity operating data was used to develop a validated reduced order model of UT’s integrated campus energy systems to serve as a testbed for use in a case study. Hypothetical renewable energy installations on land owned by UT in west Texas were modeled and integrated into the validated campus models along with battery energy storage (BES). Simulations showed that a combination of renewable energy from wind, and optimally controlled 24-hour thermal and battery storage systems could reduce carbon dioxide emissions on campus by 45.4%. The additional retrofit of burner systems to utilize hydrogen natural gas blends resulted in an overall annual emissions reduction of 54.7%. Carbon capture and storage eliminated the majority of the remaining emissions with increased plant energy expenditure. The presented simulations display the practical limitations of a CHP system complemented by renewable generation and short-term storage in eliminating emissions. Furthermore, results highlight the need for further research and development in long duration storage technologies and hydrogen fueled turbines to increase penetration of renewable energy and reduce emissions.

CHP↗
DOE OSTI2024

Simplification of the Grid Model and its Impact on the Analysis of Electrical Power Systems

Here, this paper analyzes the impact of the use of Kron reduction on the state variables of a three-phase electrical system, even when it does not meet the necessary conditions for its application. Reduction is applied to a power line model to eliminate the equation corresponding to the neutral conductor of the line. The ATP program is used to model and simulate the behavior of an electrical system considering different degrees of disequilibrium as a reference for the comparison of results. The results show that under certain conditions of disequilibrium the Kron reduction can lead to significant errors in the state variables of the system.

Electric Power Systems↗
DOE OSTI2026

Plutonium(III) versus uranium(III) and samarium(III) in small molecule activation chemistry

We report the PuIII complex, [PuIII(CpMe4)3] (1-Pu), and demonstrate its differences in small molecule reactivity compared to the UIII and SmIII analogs, [UIII(CpMe4)3] (1-U) and [SmIII(CpMe4)3] (1-Sm), respectively. 1-Pu reductively cleaves the small molecule (PhS)2, affording a PuIII complex, [{PuIII(CpMe4)2}2(μ-SPh)2] (2-Pu), while retaining the PuIII center and eliminating (CpMe4)2 as a by-product, a fingerprint of a sterically induced reduction (SIR) reaction. Sm is often used as a surrogate for Pu, but the analogous [SmIII(CpMe4)3], (1-Sm), is unreactive. The (PhS)2 cleavage by 1-U proceeds solely via a metal-based oxidation (i.e., UIII → UIV), to form [UIV(CpMe4)3(SPh)] (3-U). Only 1-U reacts with (PhHN)2, affording the reductive cleavage product, [UIV(CpMe4)3(NHPh)] (4-U). The difference in reactivity of 1-Pu compared to complexes 1-Sm and 1-U was unexpected, and since SIR chemistry can enable complexes to participate in otherwise impossible reductive transformation of substrates, this reinforces the importance of studying small molecule reactivity with the transuranic elements.

Keener, Megan↗