Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reactive adsorptive barriers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Disentangling interlayer confinement and pore surface adsorption in functionalized smectites for tunable ethylene gas capture

Smectite-based adsorbents are increasingly being studied as sustainable packaging materials for scavenging ethylene, a plant hormone that accelerates fruit ripening. However, the mechanisms governing their uptake and retention remain poorly understood. Here, to tackle this question we systematically investigate ethylene gas-solid interactions in pristine, acid-activated, and choline-functionalized montmorillonites using a complementary combination of structural, gravimetric, and spectroscopic techniques, including inelastic neutron scattering. We experimentally distinguish ethylene populations associated with interlayer confinement, mesopore, and external surface adsorption. We show that chemical functionalization distinctly controls adsorption pathways: acid activation enhances total uptake by generating mesoporous adsorption sites and promoting partial interlayer intercalation, yielding capacities comparable to those of leading smectite-based adsorbents, while choline functionalization promotes preferential confinement and stabilization of guest molecules within the interlayer galleries. Advanced spectroscopic analysis provides molecular-level insight into confinement environments and interaction strengths. We also establish clear structure-property relationships by correlating uptake values derived from independent techniques, linking chemical modification, accessible adsorption domains, and retention behavior. These findings provide general design principles for tuning gas-solid interactions in functionalized layered silicates and highlight their potential as adaptable platforms for sustainable ethylene gas capture and selective adsorption technologies.

Ethylene adsorption mechanism↗
NASA NTRS2002

Formation of ferrihydrite and associated iron corrosion products in permeable reactive barriers of zero-valent iron

Ferrihydrite, which is known to form in the presence of oxygen and to be stabilized by the adsorption of Si, PO4 and SO4, is ubiquitous in the fine-grained fractions of permeable reactive barrier (PRB) samples from the U.S. Coast Guard Support Center (Elizabeth City, NC) and the Denver Federal Center (Lakewood, CO) studied by high-resolution transmission electron microscopy and selected area electron diffraction. The concurrent energy-dispersive X-ray data indicate a strong association between ferrihydrite and metals such as Si, Ca, and Cr. Magnetite, green rust 1, aragonite, calcite, mackinawite, greigite and lepidocrocite were also present, indicative of a geochemical environment that is temporally and spatially heterogeneous. Whereas magnetite, which is known to form due to anaerobic Fe0 corrosion, passivates the Fe0 surface, ferrihydrite precipitation occurs away from the immediate Fe0 surface, forming small (<0.1 microm) discrete clusters. Consequently, Fe0-PRBs may remain effective for a longer period of time in slightly oxidized groundwater systems where ferrihydrite formation occurs compared to oxygen-depleted systems where magnetite passivation occurs. The ubiquitous presence of ferrihydrite suggests that the use of Fe0-PRBs may be extended to applications that require contaminant adsorption rather than, or in addition to, redox-promoted contaminant degradation.

Metals/chemistry↗
DOE OSTI2021

Nature of Oxygen Adsorption on Defective Carbonaceous Materials

Here, plane-wave density functional theory has been used to study oxygen adsorption on graphene, graphite, and (12,0) zigzag single-walled carbon nanotubes with and without Stone–Wales (SW) and single-vacancy (SV) defects to understand the role of defects on carbonaceous material reactivity. Atomic oxygen adsorption leads to the formation of an epoxide on defect-free graphene and graphite and an ether on the exterior wall of carbon nanotubes and SW-defected materials. O 2 chemisorption is endothermic on defect-free graphene and graphite and slightly exothermic on defect-free nanotubes. O 2 chemisorption energies are predicted to be –1.1 to –1.4 eV on an SW defect and –6.0 to –8.0 eV on an SV defect. An SW defect lowers the energy barriers by 0.90 and 0.50 eV for O 2 chemisorption on graphene and nanotubes, respectively. The formation of a C–O–O–C group is important for O 2 dissociation on defect-free and SW-defected materials. The energy barrier is less than 0.30 eV on an SV defect. The more reactive SW defect toward O adsorption on graphene is mostly due to the strained defective carbon atoms being able to donate more electrons to an O to form an ether. The larger 2s character in the hybrid orbitals in an ether than in an epoxide makes the ether C–O bond stronger. Stronger C–O binding on an SW-defective carbon nanotube than on a defect-free nanotube is in part due to more flexibility of the defect to release the epoxide ring strain to form an ether.

25 ENERGY STORAGE↗
NASA NTRS2005

Making AlN(x) Tunnel Barriers Using a Low-Energy Nitrogen-Ion Beam

A technique based on accelerating positive nitrogen ions onto an aluminum layer has been demonstrated to be effective in forming thin (<2 nm thick) layers of aluminum nitride (AlN(x)) for use as tunnel barriers in Nb/Al-AlN(x)/Nb superconductor/insulator/ superconductor (SIS) Josephson junctions. AlN(x) is the present material of choice for tunnel barriers because, to a degree greater than that of any other suitable material, it offers the required combination of low leakage current at high current density and greater thermal stability. While ultra-thin AlN films with good thickness and stoichiometry control are easily formed using techniques such as reactive molecular beam epitaxy and chemical vapor deposition, growth temperatures of 900 C are necessary for the dissociative adsorption of nitrogen from either nitrogen (N2) or ammonia (NH3). These growth temperatures are prohibitively high for the formation of tunnel barriers on Nb films because interfacial reactions at temperatures as low as 200 to 300 C degrade device properties. Heretofore, deposition by reactive sputtering and nitridation of thin Al layers with DC and RF nitrogen plasmas have been successfully used to form AlN barriers in SIS junctions. However, precise control over critical current density Jc has proven to be a challenge, as is attaining adequate process reproducibility from system to system. The present ion-beam technique is an alternative to the plasma or reactive sputtering techniques as it provides a highly controlled arrival of reactive species, independent of the electrical conditions of the substrate or vacuum chamber. Independent and accurate control of parameters such as ion energy, flux, species, and direction promises more precise control of film characteristics such as stoichiometry and thickness than is the case with typical plasma processes. In particular, the background pressure during ion-beam nitride growth is 2 or 3 orders of magnitude lower, minimizing the formation of compounds with contaminants, which is critical in devices the performance of which is dictated by interfacial characteristics. In addition, the flux of incoming species can be measured in situ using ion probes so that the dose can be controlled accurately. The apparatus used in the present ion-beam technique includes a vacuum chamber containing a commercial collimated- ion-beam source, a supply of nitrogen and argon, and an ion probe for measuring the ion dose. Either argon or nitrogen can be used as the feed gases for the ion source, depending on whether cleaning of the substrate or growth of the nitride, respectively, is desired. Once the Nb base electrode and Al proximity layer have been deposited, the N2 gas line to the ion beam is vented and purged, and the ion-source is turned on until a stable discharge is obtained. The substrate is moved over the ion-beam source to expose the Al surface layer to the ion beam (see figure) for a specified duration for the formation of the nitride tunnel barrier. Next, the Nb counter-electrode layer is deposited on the nitride surface layer. The Nb/Al- AlN(x)/Nb-trilayer-covered substrate is then patterned into individual devices by use of conventional integrated-circuit processing techniques.

Kaul, Anupama↗
DOE OSTI2022

Impact of Surface Chemistry of Ultrasmall Superparamagnetic Iron Oxide Nanoparticles on Protein Corona Formation and Endothelial Cell Uptake, Toxicity, and Barrier Function

Ultrasmall superparamagnetic iron oxide nanoparticles (USPIONs) have been investigated for biomedical applications, including novel contrast agents, magnetic tracers for tumor imaging, targeted drug delivery vehicles, and magneto-mechanical actuators for hyperthermia and thrombolysis. Despite significant progress, recent clinical reports have raised concerns regarding USPION safety related to endothelial cell dysfunction; however, there is limited information on factors contributing to these clinical responses. The influence of USPION surface chemistry on nanoparticle interactions with proteins may impact endothelial cell function leading to adverse responses. Therefore, the goal of this study was to assess the effects of carboxyl-functionalized USPION (CU) or amine-functionalized USPION (AU) (approximately 30 nm diameter) on biological responses in human coronary artery endothelial cells. Increased protein adsorption was observed for AU compared with CU after exposure to serum proteins. Exposure to CU, but not AU, resulted in a concentration-dependent decrease in cell viability and perinuclear accumulation inside cytoplasmic vesicles. Internalization of CU was correlated with endothelial cell functional changes under non-cytotoxic conditions, as evidenced by a marked decreased expression of endothelial-specific adhesion proteins (eg, vascular endothelial-cadherin and platelet endothelial cell adhesion molecule-1) and increased endothelial permeability. Evaluation of downstream signaling indicated endothelial permeability is associated with actin cytoskeleton remodeling, possibly elicited by intracellular events involving reactive oxygen species, calcium ions, and the nanoparticle cellular uptake pathway. This study demonstrated that USPION surface chemistry significantly impacts protein adsorption and endothelial cell uptake, viability, and barrier function. This information will advance the current toxicological profile of USPION and improve development, safety assessment, and clinical outcomes of USPION-enabled medical products.

Toxicology↗
DOE OSTI2026

Atomic-scale vacancy engineering unlocks basal-plane catalytic activity in metallic WSe 2 for reversible oxygen electrocatalysis

Two-dimensional metallic transition metal dichalcogenides offer high electrical conductivity and large surface areas for electrocatalysis, yet their inherent basal planes are catalytically inert. Here, we present an atomic-scale vacancy engineering strategy to activate the basal surfaces of metallic WSe 2 for reversible oxygen electrocatalysis. This approach, based on intentionally designed substitutional metal doping, promotes the spontaneous formation of selenium vacancies while preserving the metallic 1 T′ phase, thereby creating highly reactive and oxygen-affinitive sites. Density functional theory calculations reveal that these vacancy-mediated metal complexes dramatically lower the energy barriers for initial oxygen adsorption, enabling dissociative oxygen adsorption. Operando and ex-situ spectroscopic analyses confirm that vacancy-mediated metal complexes transform into dynamic Se/W-oxide intermediates under operating conditions. Se/W-oxides on the surface experimentally and theoretically prove electrocatalytic activity and reversibility. Applying this strategy in lithium–oxygen batteries, the basal-plane activated WSe 2 shows high discharge capacities (9868 mA h g −1 , corresponding to 3947 mA h g$^{-1}_{cathode}$), impressive cycle retention over 550 cycles at 1000 mA h g −1 , and outstanding rate–capability over a wide current–density range (100–3000 mA g −1 ) during 256 cycles.

2D materials↗
DOE OSTI2024

Iron Impurity Impairs the CO 2 Capture Performance of MgO: Insights from Microscopy and Machine Learning Molecular Dynamics

Magnesium oxide (MgO) is a promising sorbent for direct air capture (DAC) of carbon dioxide. Iron (Fe) is a common impurity in naturally occurring MgO and minerals used to produce MgO, yet a molecular-scale understanding of Fe-doping effects on carbonation is lacking. Here, in this study, we observed reduced carbonation performance in Fe-doped MgO experimentally. The energetics of adsorbing a (bi)carbonate ion on pristine and Fe-doped MgO(001) surfaces were further investigated using ab initio and machine learning potential molecular dynamics coupled with metadynamics simulations. Both pristine and Fe-doped surfaces exhibited a basic (OH – ) hydration layer, where the (bi)carbonate ion adsorption is thermodynamically favorable. However, the dissolution of surface Fe had smaller energy barriers and was more favorable than Mg. Leached Fe likely neutralized the near-surface basicity, yielding reduced reactivity on Fe-doped MgO. Our observations offer critical insights for material selection and emphasize the importance of evaluating the geologic origin of earth materials used for DAC.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Periodic Trends in Adsorption Energies around Single-Atom Alloy Active Sites

Single-atom alloys (SAAs) make up a special class of alloy surface catalysts that offer well-defined, isolated active sites in a more inert metal host. The dopant sites are generally assumed to have little or no influence on the properties of the host metal, and transport of chemical reactants and products to and from the dopant sites is generally assumed to be facile. Here, by performing density functional theory calculations and surface science experiments, we identify a new physical effect on SAA surfaces, whereby adsorption is destabilized by ≤300 meV on host sites within the perimeter of the reactive dopant site. We identify periodic trends for this behavior and demonstrate a zone of exclusion around the reactive sites for a range of adsorbates and combinations of host and dopant metals. Experiments confirm an increased barrier for diffusion of CO toward the dopant on a RhCu SAA. Furthermore, this effect offers new possibilities for understanding and designing active sites with tunable energetic landscapes surrounding them.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cryogenic Carbon Monoxide Oxidation on Cuprous Oxide

Performing oxidation reactions at low temperatures using earth-abundant materials is crucial for advancing solutions for sustainable chemistry. CO oxidation serves as a benchmark reaction to characterize oxidation and to advance fundamental concepts in surface chemistry. While there are several examples of CO oxidation occurring on metal oxides at low temperatures, from 300 K to ∼200 K, reactivity in the cryogenic temperature regime typically requires a metal nanoparticle on a metal oxide. Here, we show oxygen atoms on the (111) facet of Cu 2 O react with CO to form CO 2 at temperatures below 100 K. Combining spectroscopic experimental evidence with calculations, we propose a low barrier path for CO oxidation at reconstructed surface sites on Cu 2 O(111). This finding is a rare example of an earth-abundant metal oxide, in this case copper, that can provide highly reactive multifunctional sites, enabling both adsorption and reaction fundamental steps toward the efficient heterogeneous oxidation of chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interfacial Cation Arrangement Controls Electrocatalytic Kinetics in CO 2 Reduction

The identity of electrolyte cations is known to strongly influence electrocatalytic activity, but the relationship between their interfacial arrangement and observed performance remains poorly understood. Organic cations, with their molecular tunability, provide a powerful platform for systematically probing these effects. Here, we leverage phosphonium-based geminal dications to control interfacial cation arrangement and identify the variables that most strongly influence catalytic rates. As a case study, we examine CO 2 reduction to CO over polycrystalline silver electrodes in dry aprotic acetonitrile. Through a combination of rotating disk electrode measurements, electrochemical impedance spectroscopy, and molecular dynamics simulations, we decouple the effects of cation–electrode distance and interfacial cation density on catalytic rates. We find that smaller, more densely packed cations induce stronger interfacial electric fields, which lower the activation barrier for CO 2 adsorption and increase reaction rates. Using geminal phosphonium dications [C n (P mmm ) 2 ][ClO 4 ] 2 , we demonstrate that both the vertical and lateral positioning of organic cations within the electrical double layer independently affect reactivity. These results demonstrate that electrolyte cation identity primarily influences catalytic kinetics by determining how efficiently charge can be arranged at electrochemical interfaces. Altogether, our findings support an electrostatic view of cation effects in catalysis and provide design principles for next-generation electrolytes.

Cations↗
DOE OSTI2023

Long‐Range Confinement‐Driven Enrichment of Surface Oxygen‐Relevant Species Promotes C−C Electrocoupling in CO 2 Reduction

Abstract CO 2 reduction is a highly attractive route to transform CO 2 into useful feedstocks, of which C 2 products are more desired than C 1 , yet face high kinetic barriers of C−C electrocoupling. Here, the engineering of pore‐enabled local confinement reaction environments is reported for tuning the enrichment of surface‐adsorbed oxygen‐relevant species and the establishment of their pronounced benefits in promoting C−C coupling over oxide‐derived Cu‐based catalysts. A new approach of utilizing the microphase separation of a block copolymer is developed to fabricate bicontinuous mesoporous CuO nanofibers (CuO‐BPNF). The enhanced confinement from long‐range mesochannels enables the adsorption of OH ad /O ad on the Cu surface at a wide negative potential range of −0.7 – −1.3 V in CO 2 reduction, which cannot be achieved over conventional deficient and short‐range pores. Constant‐potential DFT calculations reveal that the surface‐bound oxygen species weakens *CO affinity with the Cu (111) surface and lowers the kinetic barriers for both *CO−CO dimerization and *CO hydrogenation to enable *CO−CHO coupling. Accordingly, a CO 2 ‐to‐C 2 Faradaic efficiency of 74.7% over CuO‐BPNF is shown, significantly larger than counterparts with conventional pores. This work offers a general design principle of confinement engineering to manage the adsorption of reactive species for steering reaction pathways in interfacial catalysis.

Chemistry↗
DOE OSTI2025

Molecular Insights into Geochemical Reactions of Iron-Bearing Minerals: Implications for Hydrogen Geo-Storage

Here, this study investigates the reaction of hydrogen (H 2 ) with pyrite (FeS 2 ), focusing on how temperature and the presence of water influence the reaction pathways and kinetics. Utilizing computational molecular simulations and kinetic analyses, we explore the impact of these factors on the formation of hydrogen sulfide (H 2 S) and related species. First, grand canonical Monte Carlo/molecular dynamics (GCMC/MD) simulations reveal that physical H 2 adsorption occurs in distinct layers on the pyrite surface. In addition, increased temperatures reduce the absolute adsorption capacities. Reactive MD simulations demonstrate that H 2 interacts differently with pyrite under varying conditions. At 298 K, H 2 reacts with pyrite to form HS – , leading to the formation of HS – through covalent bonding with sulfur of pyrite. However, no H 2 S is produced at this temperature, suggesting that a kinetic barrier (i.e., activation energy) may prevent this reaction. At higher temperatures, H 2 S production significantly increases. The presence of water introduces additional complexity to the reaction mechanism. Unlike dry conditions, water enhances H 2 S generation, even at low temperatures. Water also facilitates the formation of additional products, such as SOH, indicating a more intricate chemical environment on the pyrite surface. Our findings identify the association of HS – ions to form H 2 S as the rate-limiting step, with temperature influencing this process. This finding suggests that while the presence of water can create a more dynamic reaction environment, the overall mechanisms leading to H 2 S formation remain consistent. These outcomes suggest the need for developing targeted strategies to manage and control H 2 S emissions within the context of underground hydrogen storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic Insights into the Catalytic Condensation of Methyl Ketones on MgO Surfaces

Ketone coupling via aldol condensation is one of the promising routes to produce cyclic and value-added precursors for renewable hydrocarbon biofuels. A first-principles-based microkinetic modeling is performed to evaluate the surface-mediated reaction mechanisms and the role of water molecules in the observed activities for 2-pentanone and 3-pentanone aldol condensation on dehydroxylated MgO(111) surface and hydroxylated terminated surface[OH-MgO(111)]. Here, we have identified the enhancement of the surface OH group to MgO(111) surface catalytic activity by destabilizing the binding strength of reaction intermediates and reducing the energy barriers of rate-determining steps(proton transfer and dehydration steps). The 2-pentanone has one elementary step less in the complete reaction mechanism of aldol condensation and preferable energy barrier for proton transfer and dehydration steps, revealing 2-pentanone as terminal ketone is more reactive than 3-pentanone as central ketone. The water molecules dominated the OH-MgO( 111) surface after further addition of water, leading to the reduction of turnover frequency of the aldol condensation dimer product as the loss of aldol condensation reaction intermediates in competitive adsorption with water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Plasma-assisted catalysis for ammonia synthesis in a dielectric barrier discharge reactor: key surface reaction steps and potential causes of low energy yield

Ammonia synthesis experiments were carried out in a coaxial dielectric barrier discharge (DBD) reactor packed with several different supports and metal catalysts. There was a marked increase in the reaction rate, over that obtained in an empty DBD plasma reactor, upon introduction of a packed bed of γ-Al 2 O 3 , Ru/γ-Al 2 O 3 , or SiO 2 particles. The difference in the reaction rates over γ-Al 2 O 3 and Ru/γ-Al 2 O 3 was minimal. Complementary zero-dimensional plasma kinetic model analysis was also performed using inputs from experimental data. This kinetic analysis allowed for gas phase reactions, Eley–Rideal (E–R) reactions, and direct adsorption of radical species on the γ-Al 2 O 3 surface. On the metal surface, dissociative adsorption of N 2 and H 2 , and Langmuir–Hinshelwood reactions were also included. This analysis revealed that, under the conditions of our experiments, ammonia synthesis proceeds principally by the formation of reactive radicals in the gas phase, which then adsorb and participate in E–R reactions on both the metal and support material surfaces. Furthermore, this finding illustrates a challenge for substantially increasing the energy yield for plasma-assisted ammonia synthesis in typical DBD reactors containing packed catalyst beads.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Pd3Ag(111) as a Model System for Hydrogen Separation Membranes: Combined Effects of CO Adsorption and Surface Termination on the Activation of Molecular Hydrogen

Abstract The co-adsorption of hydrogen and carbon monoxide on Pd 3 Ag(111) alloy surfaces has been studied as a model system for Pd-Ag alloys in membrane and catalysis applications using periodic density functional theory calculations (PW91-GGA). We explored the effects of Pd–Ag surface composition, since segregation of silver towards and away from the surface has been suggested to explain the experimentally observed changes in H 2 activation, CO inhibition and reactivity. We found that CO pre-adsorbed on the surface weakens the adsorption of H on Pd 3 Ag(111) alloy surfaces irrespective of whether the surface termination corresponds to the bulk Pd 3 Ag composition, or is purely Pd-terminated. A higher coverage of H with CO present is obtained for the Pd-terminated surface; this surface also exhibits a larger range of chemical potentials for co-adsorbed hydrogen and CO. The barrier for H 2 activation increases with increasing CO coverage, but the surface composition has the largest impact on H 2 activation at intermediate CO coverage. The results imply that Pd-based membranes with typically ~ 23 wt% Ag are less prone to CO poisoning if the surface becomes Pd-terminated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Elucidation of the Roles of Water on the Reactivity of Surface Intermediates in Carboxylic Acid Ketonization on TiO 2

The effects of water on the carboxylic acid ketonization reaction over solid Lewis-acid catalysts were examined by nuclear magnetic resonance (NMR) spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), temperature-programmed desorption (TPD), and kinetic measurements. Acetic acid and propanoic acid were used as model compounds, and P25 TiO 2 was used as a model catalyst to represent the anatase TiO 2 since the rutile phase only contributes to <2.5% of the overall ketonization activity of P25 TiO 2 . The kinetic measurement showed that introducing H 2 O vapor in gaseous feed decreases the ketonization reaction rate by increasing the intrinsic activation barrier of gas-phase acetic acid on anatase TiO 2 . Quantitative TPD of acetic acid indicated that H 2 O does not compete with acetic acid for Lewis sites. Instead, as indicated by combined approaches of NMR and DRIFTS, H 2 O associates with the adsorbed acetate or acetic acid intermediates on the catalyst surface and alters their reactivities for the ketonization reaction. There are multiple species present on the anatase TiO 2 surface upon carboxylic acid adsorption, including molecular carboxylic acid, monodentate carboxylate, and chelating/bridging bidentate carboxylates. The presence of H 2 O vapor increases the coverage of the less reactive bridging bidentate carboxylate associated with adsorbed H 2 O, leading to lower ketonization activity on hydrated anatase TiO 2 . In conclusion, surface hydroxyl groups, which are consumed by interaction with carboxylic acid upon the formation of surface acetate species, do not impact the ketonization reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The Role of Cooperative Interactions Among Surfaces, Solvents, and Reactive Intermediates on Catalysis at Liquid–Solid Interfaces (Final Report DE-SC0020224)

This project established quantitative links between inner‑sphere chemistry (active metal identity, coordination, and zeolite topology) and outer‑sphere organization (solvent identity, hydrogen‑bond networks, and pore condensation) that govern rates, activation barriers, and selectivities for alkene epoxidation and epoxide ring‑opening at solid–liquid and quasi‑liquid–solid interfaces. We deconvoluted contributions from covalent interactions at active sites and noncovalent, solvent‑mediated interactions within pores by pairing well‑defined metal substituted zeolites with controlled solvent environments. We then mapped those contributions onto measurable kinetics (ΔH‡, ΔS‡), adsorption thermodynamics (ITC), and in situ spectroscopy. The transferrable outcomes include a set of design rules that include the following understandings. First, tune silanol ((SiOH)x) density and pore topology to organize solvent networks that selectively stabilize transition states. Second, exploit activity‑coefficient‑normalized rates and adsorption– barrier correlations to diagnose when solvent reorganization rather than surface chemistry limits performance. Third, use partial pore condensation (e.g., acetonitrile, water but also generalizable to other solvents) to elicit liquid‑like stabilization effects even in nominally vapor‑phase reactors. Collectively, these results provide strategies to increase epoxidation rates, improve oxidant utilization (i.e., selectivities), and steer regioselectivity in zeolite‑based catalytic processes relevant to sustainable oxidation chemistry. These outcomes should be transferable to other classes of reactions that proceed in microporous materials and under confinement provided by organized solvents (e.g., electrochemical double layers).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Metal-facilitated, sustainable nitroarene hydrogenation under ambient conditions

Hydrogenation is a critical reaction in the chemical industry, yielding a range of important compounds such as fine chemicals, pharmachemicals and agrochemicals. However, conventional hydrogenation typically requires pressurized hydrogen, high temperatures and involves noble metal catalysts. Here, we proposed a two-step hydrogenation process, utilizing water as the hydrogen source for the industrially important reduction of nitroarenes to anilines. A metal or reduced metal oxide, which can be obtained from solar thermal or electrochemical reduction, acts as the active site for nitrobenzene adsorption, H 2 O dissociation and in-situ hydrogen generation. Among the 15 metal and reduced metal oxides investigated, Zn and Sn emerged as highly efficient catalysts for the reduction of a broad range of organic nitro compounds under mild conditions, with H 2 utilization efficiency 1-2 orders of magnitude above the state-of-the-art. The presented protocol provides extra dimensions for designing and optimizing conventional hydrogenation process with an alternative pathway. The reactive hydrogen atoms generated in-situ effectively overcome the barriers associated with hydrogen gas dissolution and its subsequent dissociation on the catalyst surface, thereby greatly enhancing the overall effectiveness for the hydrogenation reaction. This research potentially establishes a sustainable, generally applicable alternative to conventional hydrogenation methods, simultaneously presenting a viable solution for renewable energy storage.

25 ENERGY STORAGE↗